Stability and Deactivation of Au/Fe2O3 Catalysts for CO Oxidation at Ambient Temperature and Moisture

Various Au/Fe₂O₃ catalysts were prepared by the coprecipitation method, and CO oxidation was studied at ambient temperature and in the presence of water vapor in the feed. It was found that the precipitation method and the calcination temperatures have a significant effect on the catalytic performance of CO oxidation. The stability is related to the particle size of metallic gold and -Fe₂O₃ and the oxidation state of gold and the iron crystalline phase. The sintering of the gold particles, the reduction of oxide gold to metallic gold, the accumulation of carbonate, and a decrease in the specific surface area were observed during the reaction, which may contribute to the deactivation of Au/Fe₂O₃ catalysts.     

Effect of the Composition of the Reaction Atmosphere on the Thermal Stability of Highly Dispersed Gold Particles on an Oxide Support (Au/Fe<Subscript>2</Subscript>O<Subscript>3</Subscript> System)

Gold metal particles were vacuum deposited onto the iron oxide surface and the effect of thermal treatment on the resulting Au/Fe₂O₃ samples at 30–800°C in vacuum and reaction media with different chemical compositions, i.e., 5 mbar of O₂, 5 mbar of CO, and 5 mbar of CO + 5 mbar of O₂, was studied by X-ray photoelectron spectroscopy. During the gold deposition, the increase in the intensity of the Au4f line was shown to be accompanied by its shift toward lower binding energies, which is due to the increase in the particle size of gold. Starting from a certain amount of deposited gold, the binding energy E_b(Au4f_7/2) reaches the value typical of bulk gold metal. During the heating of Au/Fe₂O₃ in vacuum or a reaction medium, fine gold particles agglomerate into coarser ones, which is manifested in the decrease in the relative [Au]/[Fe] atomic ratio. The tendency of gold particles toward agglomeration depends on the composition of the reaction medium: the process proceeds most efficiently in the CO + O₂ mixture and less intensively in CO, and the highest stability was observed upon treatment in O₂. It is assumed that the decrease in the [Au]/[Fe] atomic ratio during the thermal treatment of Au/Fe₂O₃ in CO + O₂, CO, and vacuum could be not only due to agglomeration but also due to the encapsulation of the gold particles by the reduced fragments of the support.     

Gold catalysts supported on ZnO/Al<Subscript>2</Subscript>O<Subscript>3</Subscript> for low-temperature CO oxidation

Gold catalysts with loadings ranging from 0.5 to 7.0 wt% on a ZnO/Al₂O₃ support were prepared by the deposition–precipitation method (Au/ZnO/Al₂O₃) with ammonium bicarbonate as the precipitation agent and were evaluated for performance in CO oxidation. These catalysts were characterized by inductively coupled plasma-atom emission spectrometry, temperature programmed reduction, and scanning transmission electron microscopy. The catalytic activity for CO oxidation was measured using a flow reactor under atmospheric pressure. Catalytic activity was found to be strongly dependent on the reduction property of oxygen adsorbed on the gold surface, which related to gold particle size. Higher catalytic activity was found when the gold particles had an average diameter of 3–5 nm; in this range, gold catalysts were more active than the Pt/ZnO/Al₂O₃ catalyst in CO oxidation. Au/ZnO/Al₂O₃ catalyst with small amount of ZnO is more active than Au/Al₂O₃ catalyst due to higher dispersion of gold particles.     

Carbon Monoxide Oxidation by Polyoxometalate‐Supported Gold Nanoparticulate Catalysts: Activity,Stability, and Temperature‐ Dependent Activation Properties

Nanoparticulate gold supported on a Keggin‐type polyoxometalate (POM), Cs₄[α‐SiW₁₂O₄₀]⋅n H₂O, was prepared by the sol immobilization method. The size of the gold nanoparticles (NPs) was approximately 2 nm, which was almost the same as the size of the gold colloid precursor. Deposition of gold NPs smaller than 2 nm onto POM (Au/POM) was essential for a high catalytic activity for CO oxidation. The temperature for 50 % CO conversion was −67 °C. The catalyst showed extremely high stability for at least one month at 0 °C with full conversion. The catalytic activity and the reaction mechanism drastically changed at temperatures higher than 40 °C, showing a unique behavior called a U‐shaped curve. It was revealed by IR measurement that Au^δ+ was a CO adsorption site and that adsorbed water promoted CO oxidation for the Au/POM catalyst. This is the first report on CO oxidation utilizing Au/POMs catalysts, and there is a potential for expansion to various gas‐phase reactions.     

Carbon Monoxide Oxidation by Polyoxometalate‐Supported Gold Nanoparticulate Catalysts: Activity,Stability, and Temperature‐ Dependent Activation Properties

Nanoparticulate gold supported on a Keggin‐type polyoxometalate (POM), Cs₄[α‐SiW₁₂O₄₀]?n H₂O, was prepared by the sol immobilization method. The size of the gold nanoparticles (NPs) was approximately 2 nm, which was almost the same as the size of the gold colloid precursor. Deposition of gold NPs smaller than 2 nm onto POM (Au/POM) was essential for a high catalytic activity for CO oxidation. The temperature for 50 % CO conversion was ?67 °C. The catalyst showed extremely high stability for at least one month at 0 °C with full conversion. The catalytic activity and the reaction mechanism drastically changed at temperatures higher than 40 °C, showing a unique behavior called a U‐shaped curve. It was revealed by IR measurement that Au^δ+ was a CO adsorption site and that adsorbed water promoted CO oxidation for the Au/POM catalyst. This is the first report on CO oxidation utilizing Au/POMs catalysts, and there is a potential for expansion to various gas‐phase reactions.     

When gold is not noble: catalysis by nanoparticles

Bulk gold is chemically inert and is generally regarded as a poor catalyst. However, when gold is in very small particles with diameters below 10 nm and is deposited on metal oxides or activated carbon, it becomes surprisingly active, especially at low temperatures, for many reactions such as CO oxidation and propylene epoxidation. The catalytic performance of Au is defined by three major factors: contact structure, support selection, and particle size. The role of the perimeter interfaces of Au particles as the sites for reactions is discussed as well as the change in chemical reactivity of Au clusters composed of fewer than 300 atoms.     

单晶Au表面和Au/TiO2（110）模型催化剂表面CO氧化反应机理和活性位

在分子尺度上介绍了Au/TiO2(110)模型催化剂表面和单晶Au表面CO氧化反应机理和活性位、以及H2O的作用.在低温(<320 K), H2O起着促进CO氧化的作用, CO氧化的活性位位于金纳米颗粒与TiO2载体界面(Auδ+–Oδ––Ti)的周边. O2和H2O在金纳米颗粒与TiO2载体界面边缘处反应形成OOH,而形成的OOH使O–O键活化,随后OOH与CO反应生成CO2.300 K时CO2的形成速率受限于O2压力与该反应机理相印证.相反,在高温(>320 K)下,因暴露于CO中而导致催化剂表面重组,在表面形成低配位金原子.低配位的金原子吸附O2,随后O2解离,并在金属金表面氧化CO.     

Catalytically Active Rh Sub‐Nanoclusters on TiO2 for CO Oxidation at Cryogenic Temperatures

The discovery that gold catalysts could be active for CO oxidation at cryogenic temperatures has ignited much excitement in nanocatalysis. Whether the alternative Pt group metal (PGM) catalysts can exhibit such high performance is an interesting research issue. So far, no PGM catalyst shows activity for CO oxidation at cryogenic temperatures. In this work, we report a sub‐nano Rh/TiO₂ catalyst that can completely convert CO at 223 K. This catalyst exhibits at least three orders of magnitude higher turnover frequency (TOF) than the best Rh‐based catalysts and comparable to the well‐known Au/TiO₂ for CO oxidation. The specific size range of 0.4–0.8 nm Rh clusters is critical to the facile activation of O₂ over the Rh–TiO₂ interface in a form of Rh?O?O?Ti (superoxide). This superoxide is ready to react with the CO adsorbed on TiO₂ sites at cryogenic temperatures.     

Gold‐loading magnetic core–shell organic/inorganic nanocomposites: facile preparation and multiple properties

Magnetic composite nanospheres (MCS) were first prepared via mini‐emulsion polymerization. Subsequently, the hybrid core–shell nanospheres were used as carriers to support gold nanoparticles. The as‐prepared gold‐loading magnetic composite nanospheres (Au‐MCS) had a hydrophobic core embed with γ‐Fe₃O₄ and a hydrophilic shell loaded by gold nanoparticles. Both the content of γ‐Fe₃O₄ and the size of gold nanoparticles could be controlled in our experiments, which resulted in fabricating various materials. On one hand, the Au‐MCS could be used as a T₂ contrast agent with a relaxivity coefficient of 362 mg^?1 ml S^?1 for magnetic resonance imaging. On the other hand, the Au‐MCS exhibited tunable optical‐absorption property over a wavelength range from 530 nm to 800 nm, which attributed to a secondary growth of gold nanoparticles. In addition, dynamic light scattering results of particle sizing and Zeta potential measurements revealed that Au‐MCS had a good stability in an aqueous solution, which would be helpful for further applications. Finally, it showed that the Au‐MCS were efficient catalysts for reductions of hydrophobic nitrobenzene and hydrophilic 4‐nitrophenol that could be reused by a magnetic separation process. Copyright © 2014 John Wiley & Sons, Ltd.     

Nanoceria Supported Gold Catalysts for CO Oxidation

Two types of CeO₂ nanocubes (average size of 5 and 20 nm, respectively) prepared via the hydrothermal process were selected to load gold species via a deposition‐precipitation (DP) method. Various measurements, including X‐ray diffraction (XRD), Raman spectra, high resolution transmission electron microscopy (HRTEM), in situ diffuse reflectance infrared Fourier transform spectroscopy (in situ DRIFTS), and temperature‐programmed reduction by hydrogen (H₂‐TPR), were applied to characterize the catalysts. It is found that the sample with ceria size of 20 nm (Au/CeO₂‐20) was covered by well dispersed both Au³⁺ and Au^δ+ (0 < δ < 1). For the other sample with ceria size of 5 nm (Au/CeO₂‐5), Au³⁺ is the dominant gold species. Au/CeO₂‐20 performed better catalytic activity for CO oxidation because of the strong CO adsorption of Au^δ+ in the catalysts. The catalytic activity of Au/CeO₂‐5 was improved due to the transformation of Au³⁺ to Au^δ+. Based on the CO oxidation and in situ DRIFTS results, Au^δ+ is likely to play a more important role in catalyzing CO oxidation reaction.     

A density functional theory study of gold clusters supported on layered double hydroxides

The geometrical structure and electronic properties of a series of Au _N (N = 1–8) clusters supported on a Mg²⁺, Al³⁺-containing layered double hydroxides (MgAl–LDH) are investigated using density functional theory. The Au clusters are supported on two typical crystal faces of the LDH platelet, the basal {0001} and the lateral $ \{ 10\,\bar{1}\,0\} $ crystal face, respectively, corresponding to the top and edge site of monolayer MgAl–LDH lamella for the sake of simplicity. It is revealed that an increase in the charge transfer from the LDH lamella to the Au _N clusters at the edge site rather than clusters on the top surface, demonstrating a preferential adsorption for Au _N clusters at the edge of LDH lamella. Moreover, the calculated adsorption energy of the Au _N clusters on the LDH lamella increases with the cluster size, irrespective of the adsorption site. The investigation on the interaction between O₂ and Au _N clusters on the LDH lamella is further carried out for understanding the catalytic oxidation properties of the LDH-supported Au catalyst. The formation of reactive O₂ ^? species, a necessary prerequisite in catalytic oxidation of CO, by O₂ bridging two Au atoms of Au _N clusters indicates that the LDH-supported Au catalyst has the required characteristics of a chemically active gold catalyst in CO oxidation.     

Chemical vapor infiltration method for deposition of gold nanoparticles on porous alumina supports

Knudsen’s effusion method with mass spectral analysis of the composition of the gas phase was used to measure the temperature dependence of the saturated vapor of several (CH₃)₂AuL chelate complexes and to determine the thermodynamic parameters of their sublimation. Based on the results of this study, conditions for chemical vapor deposition of gold using dimethylgold(III) chelates were chosen. Gold nanoparticles were synthesized by chemical vapor deposition (infiltration) of (CH₃)₂Au(acac) on porous granules of γ-Al₂O₃ with subsequent calcination in air at 325°C. Particle size and the chemical state of gold in Au/γ-Al₂O₃ systems were evaluated by transmission electron microscopy (TEM) and X-ray photoelectron spectroscopy (XPS). A vapor infiltration procedure is suggested to prepare metallic gold particles ≤5 nm in diameter from Au/γ-Al₂O₃. It is shown that Au/γ-Al₂O₃ systems obtained by chemical vapor infiltration and containing small gold crystallites possess high catalytic activity in CO oxidation reactions at 40°C.     

γ-Al2O3负载的金溶胶的尺寸效应对CO催化氧化活性的影响

The relationship between particle size and catalytic activity of gold nanoparticle catalysts with γ-Al2O3 as support has been investigated. The catalysts were prepared via the gold sol with different particle sizes by micelle method, and their structures were characterized by HRTEM and XRD, respectively. Furthermore, the catalytic activities were tested by CO oxidation. Experimental results showed that the catalytic activity became much weaker when gold particles were increased from 3.2 to 6.6 nm. Additionally, the particle size was also a key factor to govern catalytic activity with regard to gold supported on TiO2 prepared by the methods of deposition-precipitation.     

Catalytic performance and structural characterization of ferric oxide and its composite oxides supported gold catalysts for low-temperature CO oxidation

The preparation and catalytic activity of ferric oxide and its composite oxides supported gold catalysts for low-temperature CO oxidation were investigated detailedly, and characterized extensively by XRD, XPS, TPR, EC and XAFS techniques. It was found that containing highly dispersed Au of partially oxidized state, these nano-structured oxides supported Au/Fe2O3 and Au/NiFe2O4 catalysts had higher low-temperature activities. The possible catalytic active center is the gold of partially oxidized state (Auζ+).     

Mechanism of Gold Activation in Supported Gold Catalysts for CO Oxidation

Based on the structure of characterization of Au/Fe₂O₃ catalysts, the mechanism of gold activation in supported gold catalysts was proposed as follow:

Preparation and characterization of Fe<Subscript>3</Subscript>O<Subscript>4</Subscript>composite particles

Using Fe₃O₄ nano-particles as seeds, a new type of Fe₃O₄/Au composite particles with core/shell structure and diameter of about 170 nm was prepared by reduction of Au³⁺ with hydroxylamine in an aqueous solution. Particle size analyzer and transmission electron microscope were used to analyze the size distribution and microstructure of the particles in different conditions. The result showed that the magnetically responsive property and suspension stability of Fe₃O₄ seeds as well as reduction conditions of Au³⁺to Au⁰are the main factors which are crucial for obtaining a colloid of the Fe₃O₄/Au composite particles with uniform particle dispersion, excellent stability, homogeneity in particle sizes, and effective response to an external magnet in aqueous suspension solutions. UV-Vis analysis revealed that there is a characteristic peak of Fe₃O₄/Au fluid. For particles with d(0.5)=168 nm, the λmax is 625 nm.     

Comparative studies of gold catalysts prepared via solvated metal atom impregnation and conventional impregnation: characterization and low-temperature co oxidation

Supported Au catalysts for low-temperature CO oxidation were prepared by solvated metal atom impregnation (SMAI) and conventional impregnation (CI). X-ray photoelectron spectroscopy investigations indicated that gold in all the samples was in the metallic state. TEM and XRD measurements showed that the mean diameter of Au particles prepared by SMAI was smaller than that of those prepared by CI with the same gold content. Catalytic tests showed that SMAI catalysts had higher CO oxidation activity than CI catalysts with the same compositions. Both SMAI and CI Au/TiO₂catalysts exhibited high activities in low temperature CO oxidation. Full CO conversion was obtained at 323 K for 3.1 wt.% Au/TiO₂ (SMAI) catalyst, which displayed higher activity than the 3.1 wt.% Au/D-72(SMAI) and 3.1 wt.% Au/TiO₂(CI). Although the sizes of gold particles prepared by the same method and supported on both TiO₂ and resin were comparable, the Au/TiO₂ catalysts showed significantly higher activities than the Au/resin catalysts with the same Au contents under the same reaction conditions. These results prove that not only the gold particle size, but also the support plays a key role in CO oxidation. This revised version was published online in June 2006 with corrections to the Cover Date.     

The electrooxidation of small organic molecules on platinum nanoparticles supported on gold: influence of platinum deposition procedure

The electrocatalytic properties of small platinum nanoparticles were investigated for the oxidation of CO, methanol, and formic acid using voltammetry, chronoamperometry, and surface-enhanced Raman spectroscopy. The particles were generated by galvanostatic deposition of platinum on a polished gold surface from an H₂PtCl₆ containing electrolyte and ranged between 10 and 20 nm in diameter for low platinum surface concentrations, 10 and 120 nm for medium concentrations, and full Pt monolayers for high concentrations. CO stripping and bulk CO oxidation experiments on the particles up to 120 nm in diameter displayed pronounced structural effects. The CO oxidation current-time transients show a current decay for low platinum coverages and a current maximum for medium and high coverages. These results were also observed in the literature for particles of 2- to 5-nm size and agglomerates of these particles. The similarities between the literature and our results, despite large differences in particle size and morphology, suggest that particle structure and morphology are also very important catalytic parameters. Surface-enhanced Raman spectroscopy data obtained for the oxidation of CO on the Pt-modified Au electrodes corroborate this conclusion. A difference in the ratio between CO adsorbed in linear- and bridge-bonded positions on the Pt nanoparticles of different sizes demonstrates the influence of the surface morphology. The oxidation activity of methanol was found to decrease with the particle size, while the formic acid oxidation rate increases. Again, a structural effect is observed for particles of up to ca. 120 nm in diameter, which is much larger than the particles for which a particle size effect was reported in the literature. The particle shape effect for the methanol oxidation reaction can be explained by a reduction in available “ensemble sites” and a reduction in the mobility of CO formed by decomposition of methanol. As formic acid does not require Pt ensemble sites, decreasing the particle size, and thus, the relative number of defects, increases the reaction rate. Dedicated to Prof. Dr. Teresa Iwasita on the occasion of her 65th birthday in recognition of her numerous contributions to interfacial electrochemistry.     

纳米结构Au/Fe_2O_3的制备、表征及催化氧化性能

分别以纳米和块状氧化铁为载体,通过沉积沉淀法制备了Au/Nano-Fe2O3和Au/Bulk-Fe2O3,并对其进行了表征和催化氧化性能测试。结果表明:对于Au/Nano-Fe2O3,5 nm Au颗粒被尺寸相当的Nano-Fe2O3所包覆,形成新颖的类似核壳结构;对于Au/Bulk-Fe2O3,3 nm Au颗粒高度分散于Bulk-Fe2O3的表面。在1-苯乙醇的氧化反应中,Au/Nano-Fe2O3显示出比Au/Bulk-Fe2O3更好的催化活性。活性的增强主要与小尺寸的Nano-Fe2O3以及Au和Nano-Fe2O3更大的接触界面有关。相比于广泛受到重视的Au的尺寸效应来说,对于Au/Nano-Fe2O3而言,Fe2O3尺寸的影响更大。     

纳米结构Au/Fe2O3的制备、表征及催化氧化性能

分别以纳米和块状氧化铁为载体,通过沉积沉淀法制备了Au/Nano-Fe₂O₃和Au/Bulk-Fe₂O₃,并对其进行了表征和催化氧化性能测试。结果表明：对于Au/Nano-Fe₂O₃,5nmAu颗粒被尺寸相当的Nano-Fe₂O₃所包覆,形成新颖的类似核壳结构;对于Au/Bulk-Fe₂O₃,3nmAu颗粒高度分散于Bulk-Fe₂O₃的表面。在1-苯乙醇的氧化反应中,Au/Nano-Fe₂O₃显示出比Au/Bulk-Fe₂O₃更好的催化活性。活性的增强主要与小尺寸的Nano-Fe₂O₃以及Au和Nano-Fe₂O₃更大的接触界面有关。相比于广泛受到重视的Au的尺寸效应来说,对于Au/Nano-Fe₂O₃而言,Fe₂O₃尺寸的影响更大。