Metal‐Free Nitrogen‐Doped Mesoporous Carbon for Electroreduction of CO2 to Ethanol

CO₂ electroreduction is a promising technique for satisfying both renewable energy storage and a negative carbon cycle. However, it remains a challenge to convert CO₂ into C2 products with high efficiency and selectivity. Herein, we report a nitrogen‐doped ordered cylindrical mesoporous carbon as a robust metal‐free catalyst for CO₂ electroreduction, enabling the efficient production of ethanol with nearly 100 % selectivity and high faradaic efficiency of 77 % at −0.56 V versus the reversible hydrogen electrode. Experiments and density functional theory calculations demonstrate that the synergetic effect of the nitrogen heteroatoms and the cylindrical channel configurations facilitate the dimerization of key CO* intermediates and the subsequent proton–electron transfers, resulting in superior electrocatalytic performance for synthesizing ethanol from CO₂.     

Copper‐Bismuth Bimetallic Microspheres for Selective Electrocatalytic Reduction of CO2 to Formate

Electrocatalytic carbon dioxide reduction holds great promise for reducing the atmospheric CO₂ level and alleviating the energy crisis. High‐performance electrocatalysts are often required in order to lower the high overpotential and expedite the sluggish reaction kinetics of CO₂ electroreduction. Copper is a promising candidate metal. However, it usually suffers from the issues of poor stability and low product selectivity. In this work, bimetallic Cu‐Bi is obtained by reducing the microspherical copper bismuthate (CuBi₂O₄) for selectively catalyzing the CO₂ reduction to formate (HCOO^–). The bimetallic Cu‐Bi electrocatalyst exhibits high activity and selectivity with the Faradic efficiency over 90% in a wide potential window. A maximum Faradaic efficiency of ~95% is obtained at –0.93 V versus reversible hydrogen electrode. Furthermore, the catalyst shows high stability over 6 h with Faradaic efficiency of ~95%. This study provides an important clue in designing new functional materials for CO₂ electroreduction with high activity and selectivity.     

Enhanced Carbon Dioxide Electroreduction to Carbon Monoxide over Defect‐Rich Plasma‐Activated Silver Catalysts

Efficient, stable catalysts with high selectivity for a single product are essential if electroreduction of CO₂ is to become a viable route to the synthesis of industrial feedstocks and fuels. A plasma oxidation pre‐treatment of silver foil enhances the number of low‐coordinated catalytically active sites, which dramatically lowers the overpotential and increases the activity of CO₂ electroreduction to CO. At −0.6 V versus RHE more than 90 % Faradaic efficiency towards CO was achieved on a pre‐oxidized silver foil. While transmission electron microscopy (TEM) and operando X‐ray absorption spectroscopy showed that oxygen species can survive in the bulk of the catalyst during the reaction, quasi in situ X‐ray photoelectron spectroscopy showed that the surface is metallic under reaction conditions. DFT calculations reveal that the defect‐rich surface of the plasma‐oxidized silver foils in the presence of local electric fields drastically decrease the overpotential of CO₂ electroreduction.     

Regulation of Coordination Number over Single Co Sites: Triggering the Efficient Electroreduction of CO2

The design of active, selective, and stable CO₂ reduction electrocatalysts is still challenging. A series of atomically dispersed Co catalysts with different nitrogen coordination numbers were prepared and their CO₂ electroreduction catalytic performance was explored. The best catalyst, atomically dispersed Co with two‐coordinate nitrogen atoms, achieves both high selectivity and superior activity with 94 % CO formation Faradaic efficiency and a current density of 18.1 mA cm^?2 at an overpotential of 520 mV. The CO formation turnover frequency reaches a record value of 18 200 h^?1, surpassing most reported metal‐based catalysts under comparable conditions. Our experimental and theoretical results demonstrate that lower a coordination number facilitates activation of CO₂ to the CO₂^.? intermediate and hence enhances CO₂ electroreduction activity.     

Densely Packed,Ultra Small SnO Nanoparticles for Enhanced Activity and Selectivity in Electrochemical CO2 Reduction

Controlling the selectivity in electrochemical CO₂ reduction is an unsolved challenge. While tin (Sn) has emerged as a promising non‐precious catalyst for CO₂ electroreduction, most Sn‐based catalysts produce formate as the major product, which is less desirable than CO in terms of separation and further use. Tin monoxide (SnO) nanoparticles supported on carbon black were synthesized and assembled and their application in CO₂ reduction was studied. Remarkably high selectivity and partial current densities for CO formation were obtained using these SnO nanoparticles compared to other Sn catalysts. The high activity is attributed to the ultra‐small size of the nanoparticles (2.6 nm), while the high selectivity is attributed to a local pH effect arising from the dense packing of nanoparticles in the conductive carbon black matrix.     

Densely Packed,Ultra Small SnO Nanoparticles for Enhanced Activity and Selectivity in Electrochemical CO2 Reduction

Controlling the selectivity in electrochemical CO₂ reduction is an unsolved challenge. While tin (Sn) has emerged as a promising non‐precious catalyst for CO₂ electroreduction, most Sn‐based catalysts produce formate as the major product, which is less desirable than CO in terms of separation and further use. Tin monoxide (SnO) nanoparticles supported on carbon black were synthesized and assembled and their application in CO₂ reduction was studied. Remarkably high selectivity and partial current densities for CO formation were obtained using these SnO nanoparticles compared to other Sn catalysts. The high activity is attributed to the ultra‐small size of the nanoparticles (2.6 nm), while the high selectivity is attributed to a local pH effect arising from the dense packing of nanoparticles in the conductive carbon black matrix.     

Electrochemical Reduction of Carbon Dioxide to Methanol on Hierarchical Pd/SnO2 Nanosheets with Abundant Pd–O–Sn Interfaces

Electrochemical conversion of CO₂ into fuels using electricity generated from renewable sources helps to create an artificial carbon cycle. However, the low efficiency and poor stability hinder the practical use of most conventional electrocatalysts. In this work, a 2D hierarchical Pd/SnO₂ structure, ultrathin Pd nanosheets partially capped by SnO₂ nanoparticles, is designed to enable multi‐electron transfer for selective electroreduction of CO₂ into CH₃OH. Such a structure design not only enhances the adsorption of CO₂ on SnO₂, but also weakens the binding strength of CO on Pd due to the as‐built Pd–O–Sn interfaces, which is demonstrated to be critical to improve the electrocatalytic selectivity and stability of Pd catalysts. This work provides a new strategy to improve electrochemical performance of metal‐based catalysts by creating metal oxide interfaces for selective electroreduction of CO₂.     

MoP Nanoparticles Supported on Indium‐Doped Porous Carbon: Outstanding Catalysts for Highly Efficient CO2 Electroreduction

Electrochemical reduction of CO₂ into value‐added product is an interesting area. MoP nanoparticles supported on porous carbon were synthesized using metal–organic frameworks as the carbon precursor, and initial work on CO₂ electroreduction using the MoP‐based catalyst were carried out. It was discovered that MoP nanoparticles supported on In‐doped porous carbon had outstanding performance for CO₂ reduction to formic acid. The Faradaic efficiency and current density could reach 96.5 % and 43.8 mA cm^?2, respectively, when using ionic liquid 1‐butyl‐3‐methylimidazolium hexafluorophosphate as the supporting electrolyte. The current density is higher than those reported up to date with very high Faradaic efficiency. The MoP nanoparticles and the doped In₂O₃ cooperated very well in catalyzing the CO₂ electroreduction.     

Selective electrochemical reduction of carbon dioxide to ethanol via a relay catalytic platform

Efficient electroreduction of carbon dioxide (CO₂) to ethanol is of great importance, but remains a challenge because it involves the transfer of multiple proton–electron pairs and carbon–carbon coupling. Herein, we report a CoO-anchored N-doped carbon material composed of mesoporous carbon (MC) and carbon nanotubes (CNT) as a catalyst for CO₂ electroreduction. The faradaic efficiencies of ethanol and current density reached 60.1% and 5.1 mA cm⁻², respectively. Moreover, the selectivity for ethanol products was extremely high among the products produced from CO₂. A proposed mechanism is discussed in which the MC–CNT/Co catalyst provides a relay catalytic platform, where CoO catalyzes the formation of CO* intermediates which spill over to MC–CNT for carbon–carbon coupling to form ethanol. The high selectivity for ethanol is attributed mainly to the highly selective carbon–carbon coupling active sites on MC–CNT.

The relay catalytic platform is very efficient and selective for CO₂ electroreduction to ethanol.     

Selective CO2 Electroreduction to Ethylene and Multicarbon Alcohols via Electrolyte‐Driven Nanostructuring

Production of multicarbon products (C₂₊) from CO₂ electroreduction reaction (CO₂RR) is highly desirable for storing renewable energy and reducing carbon emission. The electrochemical synthesis of CO₂RR catalysts that are highly selective for C₂₊ products via electrolyte‐driven nanostructuring is presented. Nanostructured Cu catalysts synthesized in the presence of specific anions selectively convert CO₂ into ethylene and multicarbon alcohols in aqueous 0.1 m KHCO₃ solution, with the iodine‐modified catalyst displaying the highest Faradaic efficiency of 80 % and a partial geometric current density of ca. 31.2 mA cm^?2 for C₂₊ products at ?0.9 V vs. RHE. Operando X‐ray absorption spectroscopy and quasi in situ X‐ray photoelectron spectroscopy measurements revealed that the high C₂₊ selectivity of these nanostructured Cu catalysts can be attributed to the highly roughened surface morphology induced by the synthesis, presence of subsurface oxygen and Cu⁺ species, and the adsorbed halides.     

High‐Curvature Transition‐Metal Chalcogenide Nanostructures with a Pronounced Proximity Effect Enable Fast and Selective CO2 Electroreduction

A considerable challenge in the conversion of carbon dioxide into useful fuels comes from the activation of CO₂ to CO₂^.? or other intermediates, which often requires precious‐metal catalysts, high overpotentials, and/or electrolyte additives (e.g., ionic liquids). We report a microwave heating strategy for synthesizing a transition‐metal chalcogenide nanostructure that efficiently catalyzes CO₂ electroreduction to carbon monoxide (CO). We found that the cadmium sulfide (CdS) nanoneedle arrays exhibit an unprecedented current density of 212 mA cm^?2 with 95.5±4.0 % CO Faraday efficiency at ?1.2 V versus a reversible hydrogen electrode (RHE; without iR correction). Experimental and computational studies show that the high‐curvature CdS nanostructured catalyst has a pronounced proximity effect which gives rise to large electric field enhancement, which can concentrate alkali‐metal cations resulting in the enhanced CO₂ electroreduction efficiency.     

Silver and Copper Nitride Cooperate for CO Electroreduction to Propanol

The need of carbon sources for the chemical industry, alternative to fossil sources, has pointed to CO₂ as a possible feedstock. While CO₂ electroreduction (CO₂R) allows production of interesting organic compounds, it suffers from large carbon losses, mainly due to carbonate formation. This is why, quite recently, tandem CO₂R, a two-step process, with first CO₂R to CO using a solid oxide electrolysis cell followed by CO electroreduction (COR), has been considered, since no carbon is lost as carbonate in either step. Here we report a novel copper-based catalyst, silver-doped copper nitride, with record selectivity for formation of propanol (Faradaic efficiency: 45 %), an industrially relevant compound, from CO electroreduction in gas-fed flow cells. Selective propanol formation occurs at metallic copper atoms derived from copper nitride and is promoted by silver doping as shown experimentally and computationally. In addition, the selectivity for C₂₊ liquid products (Faradaic efficiency: 80 %) is among the highest reported so far. These findings open new perspectives regarding the design of catalysts for production of C₃ compounds from CO₂.     

Acid–Base Interaction Enhancing Oxygen Tolerance in Electrocatalytic Carbon Dioxide Reduction

Hybrid electrodes with improved O₂ tolerance and capability of CO₂ conversion into liquid products in the presence of O₂ are presented. Aniline molecules are introduced into the pore structure of a polymer of intrinsic microporosity to expand its gas separation functionality beyond pure physical sieving. The chemical interaction between the acidic CO₂ molecule and the basic amino group of aniline renders enhanced CO₂ separation from O₂. Loaded with a cobalt phthalocyanine‐based cathode catalyst, the hybrid electrode achieves a CO Faradaic efficiency of 71 % with 10 % O₂ in the CO₂ feed gas. The electrode can still produce CO at an O₂/CO₂ ratio as high as 9:1. Switching to a Sn‐based catalyst, for the first time O₂‐tolerant CO₂ electroreduction to liquid products is realized, generating formate with nearly 100 % selectivity and a current density of 56.7 mA cm^?2 in the presence of 5 % O₂.     

Selective and Efficient CO2 Electroreduction to Formate on Copper Electrodes Modified by Cationic Gemini Surfactants

Electroreduction of CO₂ into valuable chemicals and fuels is a promising strategy to mitigate energy and environmental problems. However, it usually suffers from unsatisfactory selectivity for a single product and inadequate electrochemical stability. Herein, we report the first work to use cationic Gemini surfactants as modifiers to boost CO₂ electroreduction to formate. The selectivity, activity and stability of the catalysts can be all significantly enhanced by Gemini surfactant modification. The Faradaic efficiency (FE) of formate could reach up to 96 %, and the energy efficiency (EE) could achieve 71 % over the Gemini surfactants modified Cu electrode. In addition, the Gemini surfactants modified commercial Bi₂O₃ nanosheets also showed an excellent catalytic performance, and the FE of formate reached 91 % with a current density of 510 mA cm⁻² using the flow cell. Detailed studies demonstrated that the double quaternary ammonium cations and alkyl chains of the Gemini surfactants played a crucial role in boosting electroreduction CO₂, which can not only stabilize the key intermediate HCOO* but also provide an easy access for CO₂. These observations could shine light on the rational design of organic modifiers for promoted CO₂ electroreduction.     

Favoring CO Intermediate Stabilization and Protonation by Crown Ether for CO2 Electromethanation in Acidic Media

The large-scale deployment of CO₂ electroreduction is hampered by deficient carbon utilization in neutral and alkaline electrolytes due to CO₂ loss into (bi)carbonates. Switching to acidic media mitigates carbonation, but suffers from low product selectivity because of hydrogen evolution. Here we report a crown ether decoration strategy on a Cu catalyst to enhance carbon utilization and selectivity of CO₂ methanation under acidic conditions. Macrocyclic 18-Crown-6 is found to enrich potassium cations near the Cu electrode surface, simultaneously enhancing the interfacial electric field to stabilize the *CO intermediate and accelerate water dissociation to boost *CO protonation. Remarkably, the mixture of 18-Crown-6 and Cu nanoparticles affords a CH₄ Faradaic efficiency of 51.2 % and a single pass carbon efficiency of 43.0 % toward CO₂ electroreduction in electrolyte with pH=2. This study provides a facile strategy to promote CH₄ selectivity and carbon utilization by modifying Cu catalysts with supramolecules.     

Oxygen Vacancies in Amorphous InOx Nanoribbons Enhance CO2 Adsorption and Activation for CO2 Electroreduction

Tuning surface electron transfer process by oxygen (O)‐vacancy engineering is an efficient strategy to develop enhanced catalysts for CO₂ electroreduction (CO₂ER). Herein, a series of distinct InO_x NRs with different numbers of O‐vacancies, namely, pristine (P‐InO_x), low vacancy (O‐InO_x) and high‐vacancy (H‐InO_x) NRs, have been prepared by simple thermal treatments. The H‐InO_x NRs show enhanced performance with a best formic acid (HCOOH) selectivity of up to 91.7 % as well as high HCOOH partial current density over a wide range of potentials, largely outperforming those of the P‐InO_x and O‐InO_x NRs. The H‐InO_x NRs are more durable and have a limited activity decay after continuous operating for more than 20 h. The improved performance is attributable to the abundant O‐vacancies in the amorphous H‐InO_x NRs, which optimizes CO₂ adsorption/activation and facilitates electron transfer for efficient CO₂ER.     

Nickel Doping in Atomically Thin Tin Disulfide Nanosheets Enables Highly Efficient CO2 Reduction

Engineering electronic properties by elemental doping is a direct strategy to design efficient catalysts towards CO₂ electroreduction. Atomically thin SnS₂ nanosheets were modified by Ni doping for efficient electroreduction of CO₂. The introduction of Ni into SnS₂ nanosheets significantly enhanced the current density and Faradaic efficiency for carbonaceous product relative to pristine SnS₂ nanosheets. When the Ni content was 5 atm %, the Ni‐doped SnS₂ nanosheets achieved a remarkable Faradaic efficiency of 93 % for carbonaceous product with a current density of 19.6 mA cm^?2 at ?0.9 V vs. RHE. A mechanistic study revealed that the Ni doping gave rise to a defect level and lowered the work function of SnS₂ nanosheets, resulting in the promoted CO₂ activation and thus improved performance in CO₂ electroreduction.     

Direct Synthesis of a Covalent Triazine‐Based Framework from Aromatic Amides

There have been extensive efforts to synthesize crystalline covalent triazine‐based frameworks (CTFs) for practical applications and to realize their potential. The phosphorus pentoxide (P₂O₅)‐catalyzed direct condensation of aromatic amide instead of aromatic nitrile to form triazine rings. P₂O₅‐catalyzed condensation was applied on terephthalamide to construct a covalent triazine‐based framework (pCTF‐1). This approach yielded highly crystalline pCTF‐1 with high specific surface area (2034.1 m² g^?1). At low pressure, the pCTF‐1 showed high CO₂ (21.9 wt % at 273 K) and H₂ (1.75 wt % at 77 K) uptake capacities. The direct formation of a triazine‐based COF was also confirmed by model reactions, with the P₂O₅‐catalyzed condensation reaction of both benzamide and benzonitrile to form 1,3,5‐triphenyl‐2,4,6‐triazine in high yield.     

One‐dimensional Nanomaterial Electrocatalysts for CO2 Fixation

Electroreduction of CO₂ into valuable molecules or fuels is a sustainable pathway for CO₂ reduction as well as energy storage. However, the premature development stage of electrocatalysts with high activity, selectivity, and durability still remains a significant bottleneck that hinders this field. One‐dimensional (1D) nanomaterials, including nanorods, nanotubes, nanoribbons, nanowires, and nanofibers, are generally considered as high‐activity and stable electromaterials, due to their unique uniform structures, orientated electronic and mass transport, and rigid tolerance to stress variation. During the past several years, 1D nanomaterials and nanostructures have been extensively studied due to their potentials in serving as CO₂ electroreduction catalysts. In this minireview, recent studies and advances in 1D nanomaterials for CO₂ eletroreduction are summarized, from the viewpoints of both computational and experimental aspects. Based on the composition, the 1D nanomaterials are studied in four categories, including metals, transition‐metal oxides/nitrides, transition‐metal chalcogenides, and carbon‐based materials. Different parameters in tuning 1D materials are also summarized and discussed, such as the crystal facets, grain boundaries, heteroatoms doping, additives and the electrochemical tuning effects. Finally, the challenges and prospects in this direction will be discussed.     

Highly Selective CO2 Electroreduction to CH4 by In Situ Generated Cu2O Single-Type Sites on a Conductive MOF: Stabilizing Key Intermediates with Hydrogen Bonding

It is still a great challenge to achieve high selectivity of CH₄ in CO₂ electroreduction reactions (CO₂RR) because of the similar reduction potentials of possible products and the sluggish kinetics for CO₂ activation. Stabilizing key reaction intermediates by single type of active sites supported on porous conductive material is crucial to achieve high selectivity for single product such as CH₄. Here, Cu₂O(111) quantum dots with an average size of 3.5 nm are in situ synthesized on a porous conductive copper-based metal–organic framework (CuHHTP), exhibiting high selectivity of 73 % towards CH₄ with partial current density of 10.8 mA cm⁻² at −1.4 V vs. RHE (reversible hydrogen electrode) in CO₂RR. Operando infrared spectroscopy and DFT calculations reveal that the key intermediates (such as *CH₂O and *OCH₃) involved in the pathway of CH₄ formation are stabilized by the single active Cu₂O(111) and hydrogen bonding, thus generating CH₄ instead of CO.