Theoretical Efficiency Limits of Photoelectrochemical CO2 Reduction: A Route-Dependent Thermodynamic Analysis

Solar-fuel formation via photoelectrochemical (PEC) routes using water and CO₂ as feedstock has attracted much attention. Most PEC CO₂ reduction studies have been focused on the development of novel photoactive materials; however, there is still a lack of understanding of the key limiting factors of this process. In this study, the theoretical limits of Solar-to-Fuel (STF) efficiencies of single- and dual-junction photo-absorbing materials are illustrated for single-step multi-electron CO₂ reduction into fuels including HCOO⁻, CO, CH₃OH and C₂H₅OH. It is also highlighted that STF efficiency depends on the route of two-step PEC CO₂ reduction process using CH₃OH as a model fuel. Finally, it is illustrated the beneficial role of alternative strategies such as dual-junction photo-absorbing electrodes, externally applied bias and subsequent reactor chambers on the maximum theoretical efficiencies of PEC CO₂ reduction.     

Stability and Degradation Mechanisms of Copper‐Based Catalysts for Electrochemical CO2 Reduction

To date, copper is the only monometallic catalyst that can electrochemically reduce CO₂ into high value and energy‐dense products, such as hydrocarbons and alcohols. In recent years, great efforts have been directed towards understanding how its nanoscale structure affects activity and selectivity for the electrochemical CO₂ reduction reaction (CO₂RR). Furthermore, many attempts have been made to improve these two properties. Nevertheless, to advance towards applied systems, the stability of the catalysts during electrolysis is of great significance. This aspect, however, remains less investigated and discussed across the CO₂RR literature. In this Minireview, the recent progress on understanding the stability of copper‐based catalysts is summarized, along with the very few proposed degradation mechanisms. Finally, our perspective on the topic is given.     

Achieving Simultaneous CO2 and H2S Conversion via a Coupled Solar‐Driven Electrochemical Approach on Non‐Precious‐Metal Catalysts

Carbon dioxide (CO₂) and hydrogen sulfide (H₂S) are generally concomitant with methane (CH₄) in natural gas and traditionally deemed useless or even harmful. Developing strategies that can simultaneously convert both CO₂ and H₂S into value‐added products is attractive; however it has not received enough attention. A solar‐driven electrochemical process is demonstrated using graphene‐encapsulated zinc oxide catalyst for CO₂ reduction and graphene catalyst for H₂S oxidation mediated by EDTA‐Fe²⁺/EDTA‐Fe³⁺ redox couples. The as‐prepared solar‐driven electrochemical system can realize the simultaneous conversion of CO₂ and H₂S into carbon monoxide and elemental sulfur at near neutral conditions with high stability and selectivity. This conceptually provides an alternative avenue for the purification of natural gas with added economic and environmental benefits.     

Tunable Syngas Production from CO2 and H2O in an Aqueous Photoelectrochemical Cell

Syngas, the mixture of CO and H₂, is a key feedstock to produce methanol and liquid fuels in industry, yet limited success has been made to develop clean syngas production using renewable solar energy. We demonstrated that syngas with a benchmark turnover number of 1330 and a desirable CO/H₂ ratio of 1:2 could be attained from photoelectrochemical CO₂ and H₂O reduction in an aqueous medium by exploiting the synergistic co‐catalytic effect between Cu and ZnO. The CO/H₂ ratio in the syngas products was tuned in a large range between 2:1 and 1:4 with a total unity Faradaic efficiency. Moreover, a high Faradaic efficiency of 70 % for CO was acheived at underpotential of 180 mV, which is the lowest potential ever reported in an aqueous photoelectrochemical cell. It was found that the combination of Cu and ZnO offered complementary chemical properties that lead to special reaction channels not seen in Cu, or ZnO alone.     

Metal‐Free Fluorine‐Doped Carbon Electrocatalyst for CO2 Reduction Outcompeting Hydrogen Evolution

The electrochemical CO₂ reduction (ECDRR), as a key reaction in artificial photosynthesis to implement renewable energy conversion/storage, has been inhibited by the low efficiency and high costs of the electrocatalysts. Herein, we synthesize a fluorine‐doped carbon (FC) catalyst by pyrolyzing commercial BP 2000 with a fluorine source, enabling a highly selective CO₂‐to‐CO conversion with a maximum Faradaic efficiency of 90 % at a low overpotential of 510 mV and a small Tafel slope of 81 mV dec^?1, outcompeting current metal‐free catalysts. Moreover, the higher partial current density of CO and lower partial current density of H₂ on FC relative to pristine carbon suggest an enhanced inherent activity towards ECDRR as well as a suppressed hydrogen evolution by fluorine doping. Fluorine doping activates the neighbor carbon atoms and facilitates the stabilization of the key intermediate COOH* on the fluorine‐doped carbon material, which are also blocked for competing hydrogen evolution, resulting in superior CO₂‐to‐CO conversion.     

Efficient CO2 Capture and Photoreduction by Amine‐Functionalized TiO2

Amine‐functionalization of TiO₂ nanoparticles, through a solvothermal approach, substantially increases the affinity of CO₂ on TiO₂ surfaces through chemisorption. This chemisorption allows for more effective activation of CO₂ and charge transfer from excited TiO₂, and significantly enhances the photocatalytic rate of CO₂ reduction into methane and CO.     

High‐Yield Electrochemical Production of Formaldehyde from CO2 and Seawater

The catalytic, electrocatalytic, or photocatalytic conversion of CO₂ into useful chemicals in high yield for industrial applications has so far proven difficult. Herein, we present our work on the electrochemical reduction of CO₂ in seawater using a boron‐doped diamond (BDD) electrode under ambient conditions to produce formaldehyde. This method overcomes the usual limitation of the low yield of higher‐order products, and also reduces the generation of H₂. In comparison with other electrode materials, BDD electrodes have a wide potential window and high electrochemical stability, and, moreover, exhibit very high Faradaic efficiency (74 %) for the production of formaldehyde, using either methanol, aqueous NaCl, or seawater as the electrolyte. The high Faradaic efficiency is attributed to the sp³‐bonded carbon of the BDD. Our results have wide ranging implications for the efficient and cost‐effective conversion of CO₂.     

Copper‐Bismuth Bimetallic Microspheres for Selective Electrocatalytic Reduction of CO2 to Formate

Electrocatalytic carbon dioxide reduction holds great promise for reducing the atmospheric CO₂ level and alleviating the energy crisis. High‐performance electrocatalysts are often required in order to lower the high overpotential and expedite the sluggish reaction kinetics of CO₂ electroreduction. Copper is a promising candidate metal. However, it usually suffers from the issues of poor stability and low product selectivity. In this work, bimetallic Cu‐Bi is obtained by reducing the microspherical copper bismuthate (CuBi₂O₄) for selectively catalyzing the CO₂ reduction to formate (HCOO^–). The bimetallic Cu‐Bi electrocatalyst exhibits high activity and selectivity with the Faradic efficiency over 90% in a wide potential window. A maximum Faradaic efficiency of ~95% is obtained at –0.93 V versus reversible hydrogen electrode. Furthermore, the catalyst shows high stability over 6 h with Faradaic efficiency of ~95%. This study provides an important clue in designing new functional materials for CO₂ electroreduction with high activity and selectivity.     

Visible‐Light Photochemical Reduction of CO2 to CO Coupled to Hydrocarbon Dehydrogenation

Research on the photochemical reduction of CO₂, initiated already 40 years ago, has with few exceptions been performed by using amines as sacrificial reductants. Hydrocarbons are high‐volume chemicals whose dehydrogenation is of interest, so the coupling of a CO₂ photoreduction to a hydrocarbon‐photodehydrogenation reaction seems a worthwhile concept to explore. A three‐component construct was prepared including graphitic carbon nitride (g‐CN) as a visible‐light photoactive semiconductor, a polyoxometalate (POM) that functions as an electron acceptor to improve hole–electron charge separation, and an electron donor to a rhenium‐based CO₂ reduction catalyst. Upon photoactivation of g‐CN, a cascade is initiated by dehydrogenation of hydrocarbons coupled to the reduction of the polyoxometalate. Visible‐light photoexcitation of the reduced polyoxometalate enables electron transfer to the rhenium‐based catalyst active for the selective reduction of CO₂ to CO. The construct was characterized by zeta potential, IR spectroscopy, thermogravimetry, scanning electron microscopy (SEM) and energy dispersive X‐ray spectroscopy (EDS). An experimental Z‐scheme diagram is presented based on electrochemical measurements and UV/Vis spectroscopy. The conceptual advance should promote study into more active systems.     

Solar Fuels: Photoelectrosynthesis of CO from CO2 at p‐Type Si using Fe Porphyrin Electrocatalysts

Photoelectrocatalytic conversion of CO₂ to CO can be driven at a boron‐doped, hydrogen terminated, p‐type silicon electrode using a meso‐tetraphenylporphyrin Fe^III chloride in the presence of CF₃CH₂OH as a proton source and 0.1 M [NBu₄][BF₄]/MeCN/5 % DMF (v/v) as the electrolyte. Under illumination with polychromatic light, the photoelectrocatalysis operates with a photovoltage of about 650 mV positive of that for the dark reaction. Carbon monoxide is produced with a current efficiency >90 % and with a high selectivity over H₂ formation. Photoelectrochemical current densities of 3 mA cm^?2 at ?1.1 V versus SCE are typical, and 175 turnovers have been attained over a 6 h period. Cyclic voltammetric data are consistent with a turnover frequency of ${k{{{\rm Si}\hfill \atop {\rm obs}\hfill}}}$ =0.24×10⁴ s^?1 for the photoelectrocatalysis at p‐type Si at ?1.2 V versus SCE this compares with ${k{{{\rm C}\hfill \atop {\rm obs}\hfill}}}$ =1.03×10⁴ s^?1 for the electrocatalysis in the dark on vitreous carbon at a potential of ?1.85 V versus SCE.     

Origin of Thermal and Hyperthermal CO2 from CO Oxidation on Pt Surfaces: The Role of Post‐Transition‐State Dynamics,Active Sites,and Chemisorbed CO2

The post‐transition‐state dynamics in CO oxidation on Pt surfaces are investigated using DFT‐based ab initio molecular dynamics simulations. While the initial CO₂ formed on a terrace site on Pt(111) desorbs directly, it is temporarily trapped in a chemisorption well on a Pt(332) step site. These two reaction channels thus produce CO₂ with hyperthermal and thermal velocities with drastically different angular distributions, in agreement with recent experiments (Nature, 2018 , 558, 280–283). The chemisorbed CO₂ is formed by electron transfer from the metal to the adsorbate, resulting in a bent geometry. While chemisorbed CO₂ on Pt(111) is unstable, it is stable by 0.2 eV on a Pt(332) step site. This helps explain why newly formed CO₂ produced at step sites desorbs with far lower translational energies than those formed at terraces. This work shows that steps and other defects could be potentially important in finding optimal conditions for the chemical activation and dissociation of CO₂.     

Solar‐Powered Organic Semiconductor–Bacteria Biohybrids for CO2 Reduction into Acetic Acid

An organic semiconductor–bacteria biohybrid photosynthetic system is used to efficiently realize CO₂ reduction to produce acetic acid with the non‐photosynthetic bacteria Moorella thermoacetica. Perylene diimide derivative (PDI) and poly(fluorene‐co‐phenylene) (PFP) were coated on the bacteria surface as photosensitizers to form a p‐n heterojunction (PFP/PDI) layer, affording higher hole/electron separation efficiency. The π‐conjugated semiconductors possess excellent light‐harvesting ability and biocompatibility, and the cationic side chains of organic semiconductors could intercalate into cell membranes, ensuring efficient electron transfer to bacteria. Moorella thermoacetica can thus harvest photoexcited electrons from the PFP/PDI heterojunction, driving the Wood–Ljungdahl pathway to synthesize acetic acid from CO₂ under illumination. The efficiency of this organic biohybrid is about 1.6 %, which is comparable to those of reported inorganic biohybrid systems.     

From Solar Energy to Fuels: Recent Advances in Light‐Driven C1 Chemistry

Catalytic C₁ chemistry based on the activation/conversion of synthesis gas (CO+H₂), methane, carbon dioxide, and methanol offers great potential for the sustainable development of hydrocarbon fuels to replace oil, coal, and natural gas. Traditional thermal catalytic processes used for C₁ transformations require high temperatures and pressures, thereby carrying a significant carbon footprint. In comparison, solar‐driven C₁ catalysis offers a greener and more sustainable pathway for manufacturing fuels and other commodity chemicals, although conversion efficiencies are currently too low to justify industry investment. In this Review, we highlight recent advances and milestones in light‐driven C₁ chemistry, including solar Fischer–Tropsch synthesis, the water‐gas‐shift reaction, CO₂ hydrogenation, as well as methane and methanol conversion reactions. Particular emphasis is placed on the rational design of catalysts, structure–reactivity relationships, as well as reaction mechanisms. Strategies for scaling up solar‐driven C₁ processes are also discussed.     

Electroreduction of CO2 on Single‐Site Copper‐Nitrogen‐Doped Carbon Material: Selective Formation of Ethanol and Reversible Restructuration of the Metal Sites

It is generally believed that CO₂ electroreduction to multi‐carbon products such as ethanol or ethylene may be catalyzed with significant yield only on metallic copper surfaces, implying large ensembles of copper atoms. Here, we report on an inexpensive Cu‐N‐C material prepared via a simple pyrolytic route that exclusively feature single copper atoms with a CuN₄ coordination environment, atomically dispersed in a nitrogen‐doped conductive carbon matrix. This material achieves aqueous CO₂ electroreduction to ethanol at a Faradaic yield of 55 % under optimized conditions (electrolyte: 0.1 m CsHCO₃, potential: ?1.2 V vs. RHE and gas‐phase recycling set up), as well as CO electroreduction to C₂‐products (ethanol and ethylene) with a Faradaic yield of 80 %. During electrolysis the isolated sites transiently convert into metallic copper nanoparticles, as shown by operando XAS analysis, which are likely to be the catalytically active species. Remarkably, this process is reversible and the initial material is recovered intact after electrolysis.     

Platinum‐Free Binary Co‐Ni Alloy Counter Electrodes for Efficient Dye‐Sensitized Solar Cells

Dye‐sensitized solar cells (DSSCs) have attracted growing interest because of their application in renewable energy technologies in developing modern low‐carbon economies. However, the commercial application of DSSCs has been hindered by the high expenses of platinum (Pt) counter electrodes (CEs). Here we use Pt‐free binary Co‐Ni alloys synthesized by a mild hydrothermal strategy as CE materials in efficient DSSCs. As a result of the rapid charge transfer, good electrical conduction, and reasonable electrocatalysis, the power conversion efficiencies of Co‐Ni‐based DSSCs are higher than those of Pt‐only CEs, and the fabrication expense is markedly reduced. The DSSCs based on a CoNi_0.25 alloy CE displays an impressive power conversion efficiency of 8.39 %, fast start‐up, multiple start/stop cycling, and good stability under extended irradiation.     

Morphology-Directed Selective Production of Ethylene or Ethane from CO2 on a Cu Mesopore Electrode

The electrocatalytic conversion of CO₂ to value-added hydrocarbons is receiving significant attention as a promising way to close the broken carbon-cycle. While most metal catalysts produce C₁ species, such as carbon monoxide and formate, the production of various hydrocarbons and alcohols comprising more than two carbons has been achieved using copper (Cu)-based catalysts only. Methods for producing specific C₂ reduction outcomes with high selectivity, however, are not available thus far. Herein, the morphological effect of a Cu mesopore electrode on the selective production of C₂ products, ethylene or ethane, is presented. Cu mesopore electrodes with precisely controlled pore widths and depths were prepared by using a thermal deposition process on anodized aluminum oxide. With this simple synthesis method, we demonstrated that C₂ chemical selectivity can be tuned by systematically altering the morphology. Supported by computational simulations, we proved that nanomorphology can change the local pH and, additionally, retention time of key intermediates by confining the chemicals inside the pores.