Cooperative Cluster Metalation and Ligand Migration in Zirconium Metal–Organic Frameworks

Cooperative cluster metalation and ligand migration were performed on a Zr‐MOF, leading to the isolation of unique bimetallic MOFs based on decanuclear Zr₆M₄ (M=Ni, Co) clusters. The M²⁺ reacts with the μ₃‐OH and terminal H₂O ligands on an 8‐connected [Zr₆O₄(OH)₈(H₂O)₄] cluster to form a bimetallic [Zr₆M₄O₈(OH)₈(H₂O)₈] cluster. Along with the metalation of Zr₆ cluster, ligand migration is observed in which a Zr–carboxylate bond dissociates to form a M–carboxylate bond. Single‐crystal to single‐crystal transformation is realized so that snapshots for cooperative cluster metalation and ligand migration processes are captured by successive single‐crystal X‐ray structures. In³⁺ was metalated into the same Zr‐MOF which showed excellent catalytic activity in the acetaldehyde cyclotrimerization reaction. This work not only provides a powerful tool to functionalize Zr‐MOFs with other metals, but also structurally elucidates the formation mechanism of the resulting heterometallic MOFs.     

Stereoselective Halogenation of Integral Unsaturated C‐C Bonds in Chemically and Mechanically Robust Zr and Hf MOFs

Metal–organic frameworks (MOFs) containing Zr^IV‐based secondary building units (SBUs), as in the UiO‐66 series, are receiving widespread research interest due to their enhanced chemical and mechanical stabilities. We report the synthesis and extensive characterisation, as both bulk microcrystalline and single crystal forms, of extended UiO‐66 (Zr and Hf) series MOFs containing integral unsaturated alkene, alkyne and butadiyne units, which serve as reactive sites for postsynthetic modification (PSM) by halogenation. The water stability of a Zr–stilbene MOF allows the dual insertion of both ?OH and ?Br groups in a single, aqueous bromohydrination step. Quantitative bromination of alkyne‐ and butadiyne‐containing MOFs is demonstrated to be stereoselective, as a consequence of the linker geometry when bound in the MOFs, while the inherent change in hybridisation and geometry of integral linker atoms is facilitated by the high mechanical stabilities of the MOFs, allowing bromination to be characterised in a single‐crystal to single‐crystal (SCSC) manner. The facile addition of bromine across the unsaturated C?C bonds in the MOFs in solution is extended to irreversible iodine sequestration in the vapour phase. A large‐pore interpenetrated Zr MOF demonstrates an I₂ storage capacity of 279 % w/w, through a combination of chemisorption and physisorption, which is comparable to the highest reported capacities of benchmark iodine storage materials for radioactive I₂ sequestration. We expect this facile PSM process to not only allow trapping of toxic vapours, but also modulate the mechanical properties of the MOFs.     

Combination of Optimization and Metalated‐Ligand Exchange: An Effective Approach to Functionalize UiO‐66(Zr) MOFs for CO2 Separation

The strategy to functionalize water‐stable metal–organic frameworks (MOFs) in order to improve their CO₂ uptake capacities for efficient CO₂ separation remains limited and challenging. We herein present an effective approach to functionalize a prominent water‐stable MOF, UiO‐66(Zr), by a combination of optimization and metalated‐ligand exchange. In particular, by systematic optimization, we have successfully obtained UiO‐66(Zr) of the highest BET surface area reported so far (1730 m² g^?1). Moreover, it shows a hybrid Type I/IV N₂ isotherm at 77 K and a mesopore size of 3.9 nm for the first time. The UiO‐66 MOF underwent a metalated‐ligand‐exchange (MLE) process to yield a series of new UiO‐66‐type MOFs, among which UiO‐66‐(COONa)₂‐EX and UiO‐66‐(COOLi)₄‐EX MOFs have both enhanced CO₂ working capacity and IAST CO₂/N₂ selectivity. Our approach has thus suggested an alternative design to achieve water‐stable MOFs with high crystallinity and gas uptake for efficient CO₂ separation.     

Water‐stable Adenine‐based MOFs with Polar Pores for Selective CO2 Capture

Here, we report two novel water‐stable amine‐functionalized MOFs, namely IISERP‐MOF26 ([NH₂(CH₃)₂][Cu₂O(Ad)(BDC)]?(H₂O)₂(DMA), 1 ) and IISERP‐MOF27 ([NH₂(CH₃)₂]_1/2[Zn₄O(Ad)₃(BDC)₂]?(H₂O)₂(DMF)_1/2, 2 ), which show selective CO₂ capture capabilities. They are made by combining inexpensive and readily available terephthalic acid and N‐rich adenine with Cu and Zn, respectively. They possess 1D channels decorated by the free amine group from the adenine and the polarizing oxygen atoms from the terephthalate units. Even more, there are dimethyl ammonium (DMA⁺) cations in the pore rendering an electrostatic environment within the channels. The activated Cu‐ and Zn‐MOFs physisorb about 2.7 and 2.2 mmol g^?1 of CO₂, respectively, with high CO₂/N₂ and moderate CO₂/CH₄ selectivity. The calculated heat of adsorption (HOA=21–23 kJ mol^?1) for the CO₂ in both MOFs suggest optimal physical interactions which corroborate well with their facile on‐off cycling of CO₂. Notably, both MOFs retain their crystallinity and porosity even after soaking in water for 24 hours as well as upon exposure to steam over 24 hours. The exceptional thermal and chemical stability, favorable CO₂ uptakes and selectivity and low HOA make these MOFs promising sorbents for selective CO₂ capture applications. However, the MOF′s low heat of adsorption despite having a highly CO₂‐loving groups lined walls is quite intriguing.     

Assembly of Three 2D Metal‐Organic Frameworks (MOFs) Derived from Flexible Ligands, 1,4‐bis(3‐pyridyl)‐2,3‐diaza‐1,3‐butadiene (3‐bpd) and/or 1,2‐bis(4‐pyridyl)ethane (dpe)

Three coordination polymers, {[Cd(3‐bpd)₂(NCS)₂]×C₂H₅OH}_n ( 1 ), {[Cd(3‐bpd)(dpe)(NO₃)₂]×(3‐bpd)}₂ ( 2 ), {[Cd(dpe)₂(NCS)₂]×3‐bpd×2H₂O}_n ( 3 ) (3‐bpd = 1,4‐bis(3‐pyridyl)‐2,3‐diaza‐1,3‐butadiene; dpe = 1,2‐bis(4‐pyridyl)ethane), were prepared and structurally characterized by a single‐crystal X‐ray diffraction method. In compound 1 , each Cd(II) ion is six‐coordinate bonded to six nitrogen atoms from four 3‐bpd and two NCS^? ligands. The 3‐bpd acts as a bridging ligand connecting the Cd(II) ion to generate a 2D layered metal‐organic framework (MOF) by using a rhomboidal‐grid as the basic building units with the 4⁴ topology. In compound 2 , the Cd(II) ion is also six‐coordinate bonded to four nitrogen atoms of two 3‐bpd, two dpe and two oxygen atoms of two NO₃^? ligands. The 3‐bpd and dpe ligands both adopt bis‐monodentate coordination mode connecting the Cd(II) ions to generate a 2D layered MOF by using a rectangle‐grid as the basic building units with the 4⁴ topology. In compound 3 , two crystallographically independent Cd(II) ions are both coordinated by four nitrogen atoms of dpe ligands in the basal plane and two nitrogen atom of NCS^? in the axial sites. The dpe acts as a bridging ligand to connect the Cd(II) ions forming a 2D interpenetrating MOFs by using a square‐grid as the basic unit with the 4⁴ topology. All of their 2D layered MOFs in compounds 1 ‐ 3 are then arranged in a parallel non‐interpenetrating ABAB—packing manner in 1 and 2 , and mutually interpenetrating manner in 3 , respectively, to extend their 3D supramolecular architectures with their 1D pores intercalated with solvent (ethanol in 1 or H₂O in 3 ) or free 3‐bpd molecules in 2 and 3 , respectively. The photoluminescence measurements of 1 ‐ 3 reveal that the emission is tentatively assigned to originate from π‐π* transition for 1 and 2 and probably due to ligand‐center luminescence for compounds 3 , respectively.     

A Metal–Organic Framework Containing Unusual Eight‐Connected Zr–Oxo Secondary Building Units and Orthogonal Carboxylic Acids for Ultra‐sensitive Metal Detection

Two metal–organic frameworks (MOFs) with Zr–oxo secondary building units (SBUs) were prepared by using p,p′‐terphenyldicarboxylate (TPDC) bridging ligands pre‐functionalized with orthogonal succinic acid (MOF‐ 1 ) and maleic acid groups (MOF‐ 2 ). Single‐crystal X‐ray structure analysis of MOF‐ 1 provides the first direct evidence for eight‐connected SBUs in UiO‐type MOFs. In contrast, MOF‐ 2 contains twelve‐connected SBUs as seen in the traditional UiO MOF topology. These structural assignments were confirmed by extended X‐ray absorption fine structure (EXAFS) analysis. The highly porous MOF‐ 1 is an excellent fluorescence sensor for metal ions with the detection limit of <0.5 ppb for Mn²⁺and three to four orders of magnitude greater sensitivity for metal ions than previously reported luminescent MOFs.     

Iodine-Chemisorption,Interpenetration and Polycatenation: Cationic MOFs and CPs from Group 13 Metal Halides and Di-Pyridyl-Linkers

Eight cationic, two-dimensional metal-organic frameworks (MOFs) were synthesized in reactions of the group 13 metal halides AlBr₃, AlI₃, GaBr₃, InBr₃ and InI₃ with the dipyridyl ligands 1,2-di(4-pyridyl)ethylene (bpe), 1,2-di(4-pyridyl)ethane (bpa) and 4,4’-bipyridine (bipy). Seven of them follow the general formula ²_∞[MX₂(L)₂]A, M=Al, In, X=Br, I, A⁻=[MX₄]⁻, I⁻, I₃⁻, L=bipy, bpa, bpe. Thereby, the porosity of the cationic frameworks can be utilized to take up the heavy molecule iodine in gas-phase chemisorption vital for the capture of iodine radioisotopes. This is achieved by switching between I⁻ and the polyiodide I₃⁻ in the cavities at room temperature, including single-crystal-to-single-crystal transformation. The MOFs are 2D networks that exhibit (4,4)-topology in general or (6,3)-topology for ²_∞[(GaBr₂)₂(bpa)₅][GaBr₄]₂⋅bpa. The two-dimensional networks can either be arranged to an inclined interpenetration of the cationic two-dimensional networks, or to stacked networks without interpenetration. Interpenetration is accompanied by polycatenation. Due to the cationic character, the MOFs require the counter ions [MX₄]⁻, I⁻ or I₃⁻ counter ions in their pores. Whereas the [MX₄]⁻, ions are immobile, iodide allows for chemisorption. Furthermore, eight additional coordination polymers and complexes were identified and isolated that elaborate the reaction space of the herein reported syntheses.     

Stable Heterometallic Cluster‐Based Organic Framework Catalysts for Artificial Photosynthesis

A series of stable heterometallic Fe₂M cluster‐based MOFs ( NNU‐31‐M , M=Co, Ni, Zn) photocatalysts are presented. They can achieve the overall conversion of CO₂ and H₂O into HCOOH and O₂ without the assistance of additional sacrificial agent and photosensitizer. The heterometallic cluster units and photosensitive ligands excited by visible light generate separated electrons and holes. Then, low‐valent metal M accepts electrons to reduce CO₂, and high‐valent Fe uses holes to oxidize H₂O. This is the first MOF photocatalyst system to finish artificial photosynthetic full reaction. It is noted that NNU‐31‐Zn exhibits the highest HCOOH yield of 26.3 μmol g^?1 h^?1 (selectivity of ca. 100 %). Furthermore, the DFT calculations based on crystal structures demonstrate the photocatalytic reaction mechanism. This work proposes a new strategy for how to design crystalline photocatalyst to realize artificial photosynthetic overall reaction.     

Cu3(hexaiminotriphenylene)2: An Electrically Conductive 2D Metal–Organic Framework for Chemiresistive Sensing

The utility of metal–organic frameworks (MOFs) as functional materials in electronic devices has been limited to date by a lack of MOFs that display high electrical conductivity. Here, we report the synthesis of a new electrically conductive 2D MOF, Cu₃(HITP)₂ (HITP=2,3,6,7,10,11‐hexaiminotriphenylene), which displays a bulk conductivity of 0.2 S cm^?1 (pellet, two‐point‐probe). Devices synthesized by simple drop casting of Cu₃(HITP)₂ dispersions function as reversible chemiresistive sensors, capable of detecting sub‐ppm levels of ammonia vapor. Comparison with the isostructural 2D MOF Ni₃(HITP)₂ shows that the copper sites are critical for ammonia sensing, indicating that rational design/synthesis can be used to tune the functional properties of conductive MOFs.     

Tuning CO2 Uptake and Reversible Iodine Adsorption in Two Isoreticular MOFs through Ligand Functionalization

The synthesis and characterization of two isoreticular metal–organic frameworks (MOFs), {[Cd(bdc)(4‐bpmh)]}_n?2 n(H₂O) ( 1 ) and {[Cd(2‐NH₂bdc)(4‐bpmh)]}_n?2 n(H₂O) ( 2 ) [bdc=benzene dicarboxylic acid; 2‐NH₂bdc=2‐amino benzene dicarboxylic acid; 4‐bpmh=N,N‐bis‐pyridin‐4‐ylmethylene‐hydrazine], are reported. Both compounds possess similar two‐fold interpenetrated 3D frameworks bridged by dicarboxylates and a 4‐bpmh linker. The 2D Cd‐dicarboxylate layers are extended along the a‐axis to form distorted square grids which are further pillared by 4‐bpmh linkers to result in a 3D pillared‐bilayer interpenetrated framework. Gas adsorption studies demonstrate that the amino‐functionalized MOF 2 shows high selectivity for CO₂ (8.4 wt % 273 K and 7.0 wt % 298 K) over CH₄, and the uptake amounts are almost double that of non‐functional MOF 1 . Iodine (I₂) adsorption studies reveal that amino‐functionalized MOF 2 exhibits a faster I₂ adsorption rate and controlled delivery of I₂ over the non‐functionalized homolog 1 .     

Construction of 0D to 3D Copper(II) MOFs based on heterocyclic carboxylic acid: Synthesis,structures, cyclic voltammograms,and luminescent properties

The crystal structures of MOFs [Cu(PDA)(Phen)(H₂O)]₂ · 5H₂O (I) and [Cu(PZCA)₂(H₂O)₂] · 2H₂O (II) (H₂PDA = pyridine-2,6-dicarboxylic acid, Phen = 1,10-phenanthroline, HPZCA = pyrazine-2-carboxylic acid, H₂PZDA = pyrazine-2,3-carboxylic acid) have been prepared under hydrothermal conditions. These MOFs have been characterized by element analysis, single-crystal X-ray diffraction, thermogravimetric analyses and IR spectroscopy. 3D frameworks of MOFs I and II are fabricated from zero-dimensional (0D) motifs through hydrogen bonds and π-π interactions. In MOF II, the PZCA ligand comes from in situ decarboxylation of the part of pyrazine-2,3-dicarboxylic acid (H₂PZDA). Luminescent emissions bands of MOF I in methanol have been measured at room temperature and it displays selectivity to Zn²⁺, Cu²⁺, Pb²⁺, and Cd²⁺ ions. Cyclic voltammetry of MOFs I and II showed that the Cu(II/I) couple is irreversible.     

A Robust Infinite Zirconium Phenolate Building Unit to Enhance the Chemical Stability of Zr MOFs

A novel Zr‐chain based MOF, namely MIL‐163, was designed and successfully synthesized using a bis‐1,2,3‐trioxobenzene ligand. Endowed with large square‐shaped channels of 12 Å width, it shows remarkable water uptake (ca. 0.6 cm³ g^?1 at saturating vapor pressure) and a remarkable stability in simulated physiological media, where archetypical Zr carboxylate MOFs readily degrade.     

Organization and Energy Transfer of Fused Aromatic Hydrocarbon Guests within Anion‐Confining Nanochannel MOFs

The self‐assembly of Zn^II ions with 1,3,5‐tris(isonicotinoyloxyethyl)cyanurate produces new topological (4²?12⁴)₃(4³)₄ 2D metal–organic frameworks (MOFs) with anion‐confining cages. The eclipsed assembly of each 2D MOF by π–π stacking of cyanurate moieties (3.352(5) Å) forms 3D MOFs consisting of nanochannels (10.5 Å). Two of the three anions are confined in each peanut‐type cage, resulting in hydrophobicity of the nanochannels. The hydrophobic nanochannel effectively adsorbs a wide range of fused aromatic hydrocarbons (FAHs) as monomers or dimers, rendering it potentially highly useful as an energy‐transfer material.     

A Calixarene‐Based Metal–Organic Framework for Highly Selective NO2 Detection

A calixarene‐based metal–organic framework (Zr‐cal, [Zr₆O₄(OH)₄(FA)₆]₂(cal)₃], FA=formate, cal=1,3‐alt‐25,26,27,28‐tetrakis[(carboxy)methoxy]calixarene) was synthesized and characterized by single‐crystal X‐ray diffraction. The three‐dimensional framework is a 4,6‐connected network of gar topology and exhibits two equal but nonintersecting three‐dimensional pore systems. It has a specific BET surface area of 670 m² g^?1, and the calixarene cavities are accessible through the pore systems. The exposed calixarenes can be used for the visual detection and encapsulation of NO₂ through the formation of deeply colored charge–transfer complexes inside the MOF. The highly selective complexation was analyzed by UV/Vis and IR spectroscopy, and the stability of the material was confirmed by powder X‐ray diffraction and ¹H NMR spectroscopy. Finally, the MOF was used as a sensor material in a home‐made sensor cell and showed high sensitivity for NO₂.     

Hydrothermal Synthesis,Structure, and Optical Properties of Two Nanosized Ln26@CO3 (Ln=Dy and Tb) Cluster‐Based Lanthanide–Transition‐Metal–Organic Frameworks (Ln MOFs)

Two Ln₂₆@CO₃ (Ln=Dy and Tb) cluster‐based lanthanide–transition‐metal–organic frameworks (Ln MOFs) formulated as [Dy₂₆Cu₃(Nic)₂₄(CH₃COO)₈(CO₃)₁₁(OH)₂₆(H₂O)₁₄]Cl ? 3 H₂O ( 1 ; HNic=nicotinic acid) and [Tb₂₆NaAg₃(Nic)₂₇(CH₃COO)₆(CO₃)₁₁(OH)₂₆Cl(H₂O)₁₅] ? 7.5 H₂O ( 2 ) have been successfully synthesized by hydrothermal methods and characterized by IR, thermogravimetric analysis (TGA), elemental analysis, and single X‐ray diffraction. Compound 1 crystallizes in the monoclinic space group Cc with a=35.775(12) Å, b=33.346(11) Å, c=24.424(8) Å, β=93.993(5)°, V=29065(16) ų, whereas 2 crystallizes in the triclinic space group P with a=20.4929(19) Å, b=24.671(2) Å, c=29.727(3) Å, α=81.9990(10)°, β=88.0830(10)°, γ=89.9940(10)°, V=14875(2) ų. Structural analysis indicates the framework of 1 is a 3D perovskite‐like structure constructed out of CO₃@Dy₂₆ building units and Cu⁺ centers by means of nicotinic acid ligand bridging. In 2 , however, nanosized CO₃@Tb₂₆ units and [Ag₃Cl]²⁺ centers are connected by Nic^? bridges to give rise to a 2D structure. It is worth mentioning that this kind of 4d–4f cluster‐based MOF is quite rare as most of the reported analogous compounds are 3d–4f ones. Additionally, the solid‐state emission spectra of pure compound 2 at room temperature suggest an efficient energy transfer from the ligand Nic^? to Tb³⁺ ions, which we called the “antenna effect”. Compound 2 shows a good two‐photon absorption (TPA) with a TPA coefficient of 0.06947 cm GM^?1 (1 GM=10^?50 cm⁴ s photon^?1), which indicates that compound 2 might be a good choice for third‐order nonlinear optical materials.     

Complexes of Cu(II) and Co(II) with NN′-bis-8-quinolylethylenediamine

This article describes some complexes of Cu(II) and Co(II with NN′-bis-8-quinolylethylenediamine ligand (nn′). All the compounds are of stoichiometry [MX₂(nn′)] (M = Cu or Co; X = Cl^?, Br^?, I^?, NO^?₃ or SCN^?). The electronic spectra are consistent with distorted octahedral geometry around the ions, indicating the four coordination of the nn′ ligand. Magnetic susceptibility measurements down to 100 K show antiferromagnetic interactions in all the Cu(II) compounds demonstrating the existence of the ionic and bridging X group. Infrared spectra show the presence of ionic and bridging nitrate in the [M(NO₃)₂(nn′)] (M = Co or Cu) compounds and ionic and bridging NCS group in the [Cu(NCS)₂(nn′)] compound.     

Metal–Organic Frameworks (MOFs) of a Cubic Metal Cluster with Multicentered MnIMnI Bonds

MOFs with both multicentered metal–metal bonds and low‐oxidation‐state (LOS) metal ions have been underexplored hitherto. Here we report the first cubic [Mn^I₈] cluster‐based MOF ( 1 ) with multicentered Mn^I? Mn^I bonds and +1 oxidation state of manganese (Mn^I or Mn(I)), as is supported by single‐crystal structure determination, XPS analyses, and quantum chemical studies. Compound 1 possesses the shortest Mn^I? Mn^I bond of 2.372 Å. Theoretical studies with density functional theory (DFT) reveal extensive electron delocalization over the [Mn^I₈] cube. The 48 electrons in the [Mn^I₈] cube fully occupy half of the 3d‐based and the lowest 4s‐based bonding orbitals, with six electrons lying at the nonbonding 3d‐orbitals. This bonding feature renders so‐called cubic aromaticity. Magnetic properties measurements show that 1 is an antiferromagnet. This work is expected to inspire further investigation of cubic metal–metal bonding, MOF materials with LOS metals, and metalloaromatic theory.     

Solid-state vibrational spectroscopy: Part VI. An infrared and raman spectroscopic study of transition metal(II)4-methylpyridine complexes

Infrared (4000–200 cm^?1) and Raman (3500–300 cm^?1 ) spectra are reported for metal(II) halide and thiocyanate 4-methylpyridine complexes of the following stoichiometries: (MX₂(4-Mepy)₂) {M = Mn, Co, Cu or Zn, X = Cl or Br; M = Mn, Ni or Zn, X = NCS}; (MX₂(4-Mepy)₄) {M = Mn, Fe, Co or Ni, X = Cl or Br; M = Mn, Fe, Co, W or Cu, X = NCS}. For a given series of isomorphous complexes there is a correlation between the sum of the differences between the liquid and ligand values of the ν₁, ν₂, ν₃, ν₄, ν₅, ν₆, ν₇, ν₈, ν₉, ν₁₀, ν₁₂, ν₁₃ and ν₁₄ modes of 4-methylpyridine and the strength of the metal-nitrogen bond. Comparison of the shift values of pyridine and 4-methylpyridine complexes supports the suggestion that, unlike the situation in the pyridine complexes, back-donation from the metal to the ligand is unimportant in the 4-methylpyridine complexes.     

pH‐Dependent Proton Conducting Behavior in a Metal–Organic Framework Material

A porous metal–organic framework (MOF), [Ni₂(dobdc)(H₂O)₂]?6 H₂O (Ni₂(dobdc) or Ni‐MOF‐74; dobdc^4?=2,5‐dioxido‐1,4‐benzenedicarboxylate) with hexagonal channels was synthesized using a microwave‐assisted solvothermal reaction. Soaking Ni₂(dobdc) in sulfuric acid solutions at different pH values afforded new proton‐conducting frameworks, H⁺@Ni₂(dobdc). At pH 1.8, the acidified MOF shows proton conductivity of 2.2×10^?2 S cm^?1 at 80 °C and 95 % relative humidity (RH), approaching the highest values reported for MOFs. Proton conduction occurs via the Grotthuss mechanism with a significantly low activation energy as compared to other proton‐conducting MOFs. Protonated water clusters within the pores of H⁺@Ni₂(dobdc) play an important role in the conduction process.     

Tetrazine Chromophore‐Based Metal–Organic Frameworks with Unusual Configurations: Synthetic,Structural, Theoretical,Fluorescent, and Nonlinear Optical Studies

Three unusual three‐dimensional (3D) tetrazine chromophore‐based metal–organic frameworks (MOFs) {(Et₄N)[WS₄Cu₃(CN)₂(4,4′‐pytz)_0.5]}_n ( 1 ), {[MoS₄Cu₄(CN)₂(4,4′‐pytz)₂] ? CH₂Cl₂}_n ( 2 ), and {[WS₄Cu₃(4,4′‐pytz)₃] ? [N(CN)₂]}_n ( 3 ; 4,4′‐pytz=3,6‐bis(4‐pyridyl)tetrazine) have been synthesized and characterized by using FTIR and UV/Vis spectroscopy, elemental analysis, powder X‐ray diffraction, gel permeation chromatography, steady‐state fluorescence, and thermogravimetric analysis; their identities were confirmed by single‐crystal X‐ray diffraction studies. MOF 1 possesses the first five‐connected M/S/Cu (M=Mo, W) framework with an unusual 3D (4⁴?6⁶) topology constructed from T‐shaped [WS₄Cu₃]⁺ clusters as nodes and single CN^?/4,4′‐pytz bridges as linkers. MOF 2 features a novel 3D MOF structure with (4²⁰?6⁸) topology, in which the bridging 4,4′‐pytz ligands exhibit unique distorted arch structures. MOF 3 displays the first 3D MOF structure based on flywheel‐shaped [WS₄Cu₃]⁺ clusters with a non‐interpenetrating honeycomb‐like framework and a heavily distorted “ACS” topology. Steady‐state fluorescence studies of 1 – 3 reveal significant fluorescence emissions. The nonlinear optical (NLO) properties of 1 – 3 were investigated by using a Z‐scan technique with 5 ns pulses at λ=532 nm. The Z‐scan experimental results show that the π‐delocalizable tetrazine‐based 4,4′‐pytz ligands contribute to the strong third‐order NLO properties exhibited by 1 – 3 . Time‐dependent density functional theory studies afforded insight into the electronic transitions and spectral characterization of these functionalized NLO molecular materials.