Synthesis and Reversible Hydration of a Pseudoprotein,a Fully Organic Polymeric Desiccant by Multiple Single‐Crystal‐to‐Single‐Crystal Transformations

A diphenylalanine derivative, N3‐Phe‐Phe‐NHCH2CCH, was designed for topochemical azide–alkyne cycloaddition (TAAC) polymerization. This dipeptide adopted β‐sheet arrangement as designed, in its crystals, but the azide and alkyne were not fitly aligned for their topochemical reaction. However, the voids present around these groups allowed them to attain a reactive geometry upon heating and their consequent TAAC polymerization to a pseudoprotein in a single‐crystal‐to‐single‐crystal (SCSC) fashion. This motion led to the creation of channels in the product crystal and it absorbed water from the surroundings to fill these channels as H‐bonded water wire. The pseudoprotein undergo reversible hydration/dehydration in SCSC fashion many times under mild conditions: hydration at low relative humidity and dehydration at low temperature. Vapor sorption analyses suggest that this fully organic polymer might be useful as an energy‐efficient desiccant material for controlling indoor humidity.     

Crystal‐to‐Crystal Synthesis of Helically Ordered Polymers of Trehalose by Topochemical Polymerization

The synthesis of crystalline helical polymers of trehalose via topochemical azide–alkyne cycloaddition (TAAC) of a trehalose‐based monomer is presented. An unsymmetrical trehalose derivative having azide and alkyne crystallizes in two different forms having almost similar packing. Upon heating, both the crystals undergo TAAC reaction to form crystalline polymers. Powder X‐ray diffraction (PXRD) studies revealed that the monomers in both the crystals polymerize in a crystal‐to‐crystal fashion; circular dichroism (CD) studies of the product crystals revealed that the formed polymer is helically ordered. This solvent‐free, catalyst‐free polymerization method that eliminates the tedious purification of the polymeric product exemplifies the advantage of topochemical polymerization reaction over traditional solution‐phase polymerization.     

Designed Synthesis of a 1D Polymer in Twist‐Stacked Topology via Single‐Crystal‐to‐Single‐Crystal Polymerization

To synthesize a fully organic 1D polymer in a novel twist‐stacked topology, we designed a peptide monomer HC≡CCH₂‐NH‐Ile‐Leu‐N₃, which crystallizes with its molecules H‐bonded along a six‐fold screw axis. These H‐bonded columns pack parallelly such that molecules arrange head‐to‐tail, forming linear non‐covalent chains in planes perpendicular to the screw axis. The chains arrange parallelly to form molecular layers which twist‐stack along the screw axis. Crystals of this monomer, on heating, undergo single‐crystal‐to‐single‐crystal (SCSC) topochemical azide–alkyne cycloaddition (TAAC) polymerization to yield an exclusively 1,4‐triazole‐linked polymer in a twist‐stacked layered topology. This topologically defined polymer shows better mechanical strength and thermal stability than its unordered form, as evidenced by nanoindentation studies and thermogravimetric analysis, respectively. This work illustrates the scope of topochemical polymerizations for synthesizing polymers in pre‐decided topologies.     

Reversible Single‐Crystal‐to‐Single‐Crystal Photochemical Formation and Thermal Cleavage of a Cyclobutane Ring

A [2+2] cycloaddition reaction has been observed in a number of solids. The cyclobutane ring in a photodimerized material can be cleaved into olefins by UV light and heat. The high thermal stability of the metal–organic salt K₂SDC (H₂SDC=4,4’‐stilbenedicarboxylic acid) has been successfully utilized to investigate the reversible cleavage of a cyclobutane ring. The two polymorphs of K₂SDC undergo reversible cyclobutane formation by UV light and cleavage by heat in cycles. Of these, one polymorph retains its single‐crystal nature during the reversible processes. Polymorphs are known to show different physical properties and chemical reactivities. This work reveals that the retention of single‐crystal nature is strongly associated with the packing of molecules, which is controlled by kinetics and thermodynamics. The photoemissive nature of the products makes this as a promising material for photoswitches and optical data storage devices.     

Versatile Tailoring of Paddle‐Wheel ZnII Metal–Organic Frameworks through Single‐Crystal‐to‐Single‐Crystal Transformations

A new tetracarboxylate ligand having short and long arms formed 2D layer Zn^II coordination polymer 1 with paddle‐wheel secondary building units under solvothermal conditions. The framework undergoes solvent‐specific single crystal‐to‐single crystal (SC‐SC) transmetalation to produce 1_Cu . With a sterically encumbered dipyridyl linker, the same ligand forms non‐interpenetrated, 3D, pillared‐layer Zn^II metal–organic framework (MOF) 2 , which takes part in SC‐SC linker‐exchange reactions to produce three daughter frameworks. The parent MOF 2 shows preferential incorporation of the longest linker in competitive linker‐exchange experiments. All the 3D MOFs undergo complete SC‐SC transmetalation with Cu^II, whereby metal exchange in different solvents and monitoring of X‐ray structures revealed that bulky solvated metal ions lead to ordering of the shortest linker in the framework, which confirms that the solvated metal ions enter through the pores along the linker axis.     

Post‐Synthetic Reversible Incorporation of Organic Linkers into Porous Metal–Organic Frameworks through Single‐Crystal‐to‐Single‐Crystal Transformations and Modification of Gas‐Sorption Properties

The porous metal–organic framework (MOF) {[Zn₂(TCPBDA)(H₂O)₂]?30 DMF?6 H₂O}_n ( SNU‐30 ; DMF=N,N‐dimethylformamide) has been prepared by the solvothermal reaction of N,N,N′,N′‐tetrakis(4‐carboxyphenyl)biphenyl‐4,4′‐diamine (H₄TCPBDA) and Zn(NO₃)₂?6 H₂O in DMF/tBuOH. The post‐synthetic modification of SNU‐30 by the insertion of 3,6‐di(4‐pyridyl)‐1,2,4,5‐tetrazine (bpta) affords single‐crystalline {[Zn₂(TCPBDA)(bpta)]?23 DMF?4 H₂O}_n ( SNU‐31 SC ), in which channels are divided by the bpta linkers. Interestingly, unlike its pristine form, the bridging bpta ligand in the MOF is bent due to steric constraints. SNU‐31 can be also prepared through a one‐pot solvothermal synthesis from Zn^II, TCPBDA^4?, and bpta. The bpta linker can be liberated from this MOF by immersion in N,N‐diethylformamide (DEF) to afford the single‐crystalline SNU‐30 SC , which is structurally similar to SNU‐30 . This phenomenon of reversible insertion and removal of the bridging ligand while preserving the single crystallinity is unprecedented in MOFs. Desolvated solid SNU‐30′ adsorbs N₂, O₂, H₂, CO₂, and CH₄ gases, whereas desolvated SNU‐31′ exhibits selective adsorption of CO₂ over N₂, O₂, H₂, and CH₄, thus demonstrating that the gas adsorption properties of MOF can be modified by post‐synthetic insertion/removal of a bridging ligand.     

Solvent‐Vapor‐Induced Reversible Single‐Crystal‐to‐Single‐Crystal Transformation of a Triphosphaazatriangulene‐Based Metal–Organic Framework

A triphosphaazatriangulene (H₃L) was synthesized through an intramolecular triple phospha‐Friedel–Crafts reaction. The H₃L triangulene contains three phosphinate groups and an extended π‐conjugated framework, which enables the stimuli‐responsive reversible transformation of [Cu(HL)(DMSO)?(MeOH)]_n, a 3D‐MOF that exhibits reversible sorption characteristics, into (H₃L?0.5 [Cu₂(OH)₄?6 H₂O] ?4 H₂O), a 1D‐columnar assembled proton‐conducting material. The hydrophilic nature of the latter resulted in a proton conductivity of 5.5×10^?3 S cm^?1 at 95 % relative humidity and 60 °C.     

An Atomic View of Cation Diffusion Pathways from Single‐Crystal Topochemical Transformations

The diffusion pathways of Li‐ions as they traverse cathode structures in the course of insertion reactions underpin many questions fundamental to the functionality of Li‐ion batteries. Much current knowledge derives from computational models or the imaging of lithiation behavior at larger length scales; however, it remains difficult to experimentally image Li‐ion diffusion at the atomistic level. Here, by using topochemical Li‐ion insertion and extraction to induce single‐crystal‐to‐single‐crystal transformations in a tunnel‐structured V₂O₅ polymorph, coupled with operando powder X‐ray diffraction, we leverage single‐crystal X‐ray diffraction to identify the sequence of lattice interstitial sites preferred by Li‐ions to high depths of discharge, and use electron density maps to create a snapshot of ion diffusion in a metastable phase. Our methods enable the atomistic imaging of Li‐ions in this cathode material in kinetic states and provide an experimentally validated angstrom‐level 3D picture of atomic pathways thus far only conjectured through DFT calculations.     

Spontaneous Single‐Crystal‐to‐Single‐Crystal Evolution of Two Cross‐Laminated Polymers

Two cases of spontaneous evolution of monomers to linear polymers having novel cross‐laminated topology are reported. We synthesized two peptide monomers N₃‐Gly‐Gly‐NH‐CH₂‐CCH and N₃‐Gly‐Gly‐Gly‐CH₂‐CCH and solved their crystal structures by single‐crystal X‐ray diffraction. They adopt H‐bonded crisscrossed layered packing in their crystals such that: (a) the monomers are aligned head‐to‐tail in 1D‐chain‐like arrays and parallel arrangement of such arrays forms a layer; (b) the proximally placed azide and alkyne motifs are in an orientation apt for their regiospecific cycloaddition; (c) each monomer having x peptide bonds is H‐bonded with 2x monomers disposed in intersecting arrangement, which pre‐organize 1D‐chain‐like arrays in adjacent layers in perpendicular orientation. These crystals underwent spontaneous single‐crystal‐to‐single‐crystal (SCSC) polymerization via azide–alkyne cycloaddition reaction to form triazolyl‐polyglycines, at room temperature. The crisscrossed arrangement of monomers in adjacent layers ensured the formation of cross‐laminated polymers.     

Two Robust Porous Metal–Organic Frameworks Sustained by Distinct Catenation: Selective Gas Sorption and Single‐Crystal‐to‐Single‐Crystal Guest Exchange

Assembly of copper(I) halide with a new tripodal ligand, benzene‐1,3,5‐triyl triisonicotinate (BTTP4), afforded two porous metal–organic frameworks, [Cu₂I₂(BTTP4)]?2 CH₃CN ( 1? 2 CH₃CN) and [CuBr(BTTP4)]?(CH₃CN ? CHCl₃ ? H₂O) ( 2? solvents), which have been characterized by IR spectroscopy, thermogravimetry (TG), single‐crystal, and powder X‐ray diffraction (PXRD) methods. Compound 1.CH3CN is a polycatenated 3D framework that consists of 2D (6,3) networks through inclined catenation, whereas 2 is a doubly interpenetrated 3D framework possessing the ThSi₂‐type ( ths ) (10,3)‐b topology. Both frameworks contain 1D channels of effective sizes 9×12 and 10×10 Ų, which amounts to 43 and 40 % space volume accessible for solvent molecules, respectively. The TG and variable‐temperature PXRD studies indicated that the frameworks can be completely evacuated while retaining the permanent porosity, which was further verified by measurement of the desolvated complex [Cu₂I₂(BTTP4)] ( 1′ ). The subsequent guest‐exchange study on the solvent‐free framework revealed that various solvent molecules can be adsorbed through a single‐crystal‐to‐single‐crystal manner, thus giving rise to the guest‐captured structures [Cu₂I₂(BTTP4)]?C₆H₆ ( 1.benzene ), [Cu₂I₂(BTTP4)]?2 C₇H₈ ( 1.2toluene ), and [Cu₂I₂(BTTP4)]?2 C₈H₁₀ ( 1.2ethyl benzene ). The gas‐adsorption investigation disclosed that two kinds of frameworks exhibited comparable CO₂ storage capacity (86–111 mL g^?1 at 1 atm) but nearly none for N₂ and H₂, thereby implying its separation ability of CO₂ over N₂ and H₂. The vapor‐adsorption study revealed the preferential inclusion of aromatic guests over nonaromatic solvents by the empty framework, which is indicative of selectivity toward benzene over cyclohexane.     

A Tale of Copper Coordination Frameworks: Controlled Single‐Crystal‐to‐Single‐Crystal Transformations and Their Catalytic CH Bond Activation Properties

Metal–organic frameworks (MOFs), as a class of microporous materials with well‐defined channels and rich functionalities, hold great promise for various applications. Yet the formation and crystallization processes of various MOFs with distinct topology, connectivity, and properties remain largely unclear, and the control of such processes is rather challenging. Starting from a 0D Cu coordination polyhedron, MOP‐1, we successfully unfolded it to give a new 1D‐MOF by a single‐crystal‐to‐single‐crystal (SCSC) transformation process at room temperature as confirmed by SXRD. We also monitored the continuous transformation states by FTIR and PXRD. Cu MOFs with 2D and 3D networks were also obtained from this 1D‐MOF by SCSC transformations. Furthermore, Cu MOFs with 0D, 1D, and 3D networks, MOP‐1, 1D‐MOF, and HKUST‐1, show unique performances in the kinetics of the C?H bond catalytic oxidation reaction.     

Reversible Luminescent Switching in an Organic Cocrystal: Multi‐Stimuli‐Induced Crystal‐to‐Crystal Phase Transformation

A luminescent cocrystal system is reported to undergo crystal‐to‐crystal phase transformation from yellow‐emitting polymorph I to green‐emitting polymorph II, triggered by THF fuming or heating, and the green emission can recover to the initial yellow emission by grinding. The established spectroscopic and crystallographic analyses demonstrate that the phase transition occurred and benefits from the combined effect of similar molecular arrange sequence and unique alteration of intermolecular interactions from halogen/hydrogen bonds in I to π–π stacking in II. Furthermore, I and II exhibit red‐shift emission under hydrostatic pressure. The emission of I and II shows a red‐shift and recovers towards the initial emission upon acid–base fuming. This is a rare example of reversible luminescent switching of cocrystal based upon crystal‐to‐crystal phase transition, and provides an alternative strategy to develop multi‐stimuli responsive materials.     

Breathing Effect in a Cobalt Phosphonate upon Dehydration/Rehydration: A Single‐Crystal‐to‐Single‐Crystal Study

Two cobalt phosphonates, [Co₂(2,2′‐bpy)₂(H₂O)(pbtcH)] ( 1 ) and [Co₂(H₂O)(pbtcH)(phen)₂] ( 2 ; pbtcH₅=5‐phosphonatophenyl‐1,2,4‐tricarboxylic acid, 2,2′‐bpy=2,2′‐bipyridine, phen=1,10‐phenanthroline), with layer structures are reported. Compound 1 contains O‐C‐O and O‐P‐O bridged tetramers of Co₄, which are further connected by pbtcH^4? units to form a layer. In compound 2 , the cobalt tetramers made up of water‐bridged Co₂ dimers and O‐P‐O linkages are connected into a layer by pbtcH^4? units. Upon dehydration, compounds 1 and 2 experience single‐crystal‐to‐single‐crystal (SC–SC) structural transformations to form [Co₂(2,2′‐bpy)₂(pbtcH)] ( 1 a ) and [Co₂(pbtcH)(phen)₂] ( 2 a ), respectively. The process is reversible in each case. Notably, a breathing effect is observed for 1 , accompanied by pore opening and closing due to the reorientation of the coordinated 2,2′‐bpy molecules. The transformation was also monitored by in situ IR measurements. Magnetic studies reveal that antiferromagnetic interactions are mediated between the magnetic centers in compounds 1 and 1 a , whereas ferromagnetic interactions are dominant in compound 2 .