Double‐Shelled Nanocages with Cobalt Hydroxide Inner Shell and Layered Double Hydroxides Outer Shell as High‐Efficiency Polysulfide Mediator for Lithium–Sulfur Batteries

Lithium–sulfur (Li‐S) batteries have been considered as a promising candidate for next‐generation electrochemical energy‐storage technologies because of their overwhelming advantages in energy density. Suppression of the polysulfide dissolution while maintaining a high sulfur utilization is the main challenge for Li–S batteries. Here, we have designed and synthesized double‐shelled nanocages with two shells of cobalt hydroxide and layered double hydroxides (CH@LDH) as a conceptually new sulfur host for Li–S batteries. Specifically, the hollow CH@LDH polyhedra with complex shell structures not only maximize the advantages of hollow nanostructures for encapsulating a high content of sulfur (75 wt %), but also provide sufficient self‐functionalized surfaces for chemically bonding with polysulfides to suppress their outward dissolution. When evaluated as cathode material for Li–S batteries, the CH@LDH/S composite shows a significantly improved electrochemical performance.     

Long‐Life Room‐Temperature Sodium–Sulfur Batteries by Virtue of Transition‐Metal‐Nanocluster–Sulfur Interactions

Room‐temperature sodium–sulfur (RT‐Na/S) batteries hold significant promise for large‐scale application because of low cost of both sodium and sulfur. However, the dissolution of polysulfides into the electrolyte limits practical application. Now, the design and testing of a new class of sulfur hosts as transition‐metal (Fe, Cu, and Ni) nanoclusters (ca. 1.2 nm) wreathed on hollow carbon nanospheres (S@M‐HC) for RT‐Na/S batteries is reported. A chemical couple between the metal nanoclusters and sulfur is hypothesized to assist in immobilization of sulfur and to enhance conductivity and activity. S@Fe‐HC exhibited an unprecedented reversible capacity of 394 mAh g^?1 despite 1000 cycles at 100 mA g^?1, together with a rate capability of 220 mAh g^?1 at a high current density of 5 A g^?1. DFT calculations underscore that these metal nanoclusters serve as electrocatalysts to rapidly reduce Na₂S₄ into short‐chain sulfides and thereby obviate the shuttle effect.     

Hollow Carbon Nanofibers Filled with MnO2 Nanosheets as Efficient Sulfur Hosts for Lithium–Sulfur Batteries

Lithium–sulfur batteries have been investigated as promising electrochemical‐energy storage systems owing to their high theoretical energy density. Sulfur‐based cathodes must not only be highly conductive to enhance the utilization of sulfur, but also effectively confine polysulfides to mitigate their dissolution. A new physical and chemical entrapment strategy is based on a highly efficient sulfur host, namely hollow carbon nanofibers (HCFs) filled with MnO₂ nanosheets. Benefiting from both the HCFs and birnessite‐type MnO₂ nanosheets, the MnO₂@HCF hybrid host not only facilitates electron and ion transfer during the redox reactions, but also efficiently prevents polysulfide dissolution. With a high sulfur content of 71 wt % in the composite and an areal sulfur mass loading of 3.5 mg cm^?2 in the electrode, the MnO₂@HCF/S electrode delivered a specific capacity of 1161 mAh g^?1 (4.1 mAh cm^?2) at 0.05 C and maintained a stable cycling performance at 0.5 C over 300 cycles.     

Strong Lithium Polysulfide Chemisorption on Electroactive Sites of Nitrogen‐Doped Carbon Composites For High‐Performance Lithium–Sulfur Battery Cathodes

Despite the high theoretical capacity of lithium–sulfur batteries, their practical applications are severely hindered by a fast capacity decay, stemming from the dissolution and diffusion of lithium polysulfides in the electrolyte. A novel functional carbon composite (carbon‐nanotube‐interpenetrated mesoporous nitrogen‐doped carbon spheres, MNCS/CNT), which can strongly adsorb lithium polysulfides, is now reported to act as a sulfur host. The nitrogen functional groups of this composite enable the effective trapping of lithium polysulfides on electroactive sites within the cathode, leading to a much improved electrochemical performance (1200 mAh g^?1 after 200 cycles). The enhancement in adsorption can be attributed to the chemical bonding of lithium ions by nitrogen functional groups in the MNCS/CNT framework. Furthermore, the micrometer‐sized spherical structure of the material yields a high areal capacity (ca. 6 mAh cm^?2) with a high sulfur loading of approximately 5 mg cm^?2, which is ideal for practical applications of the lithium–sulfur batteries.     

Enhanced Multiple Anchoring and Catalytic Conversion of Polysulfides by Amorphous MoS3 Nanoboxes for High‐Performance Li‐S Batteries

The practical implementation of lithium–sulfur batteries is obstructed by poor conductivity, sluggish redox kinetics, the shuttle effect, large volume variation, and low areal loading of sulfur electrodes. Now, amorphous N‐doped carbon/MoS₃ (NC/MoS₃) nanoboxes with hollow porous architectures have been meticulously designed as an advanced sulfur host. Benefiting from the enhanced conductivity by the N‐doped carbon, reduced shuttle effect by the strong chemical interaction between unsaturated Mo and lithium polysulfides, improved redox reaction kinetics by the catalytic effect of MoS₃, great tolerance of volume variation and high sulfur loading arising from flexible amorphous materials with hollow‐porous structures, the amorphous NC/MoS₃ nanoboxes enabled sulfur electrodes to deliver a high areal capacity with superior rate capacity and decent cycling stability. The synthetic strategy can be generalized to fabricate other amorphous metal sulfide nanoboxes.     

X‐ray Absorption Near‐Edge Structure and Nuclear Magnetic Resonance Study of the Lithium–Sulfur Battery and its Components

Understanding the mechanism(s) of polysulfide formation and knowledge about the interactions of sulfur and polysulfides with a host matrix and electrolyte are essential for the development of long‐cycle‐life lithium–sulfur (Li–S) batteries. To achieve this goal, new analytical tools need to be developed. Herein, sulfur K‐edge X‐ray absorption near‐edge structure (XANES) and ^6,7Li magic‐angle spinning (MAS) NMR studies on a Li–S battery and its sulfur components are reported. The characterization of different stoichiometric mixtures of sulfur and lithium compounds (polysulfides), synthesized through a chemical route with all‐sulfur‐based components in the Li–S battery (sulfur and electrolyte), enables the understanding of changes in the batteries measured in postmortem mode and in operando mode. A detailed XANES analysis is performed on different battery components (cathode composite and separator). The relative amounts of each sulfur compound in the cathode and separator are determined precisely, according to the linear combination fit of the XANES spectra, by using reference compounds. Complementary information about the lithium species within the cathode are obtained by using ⁷Li MAS NMR spectroscopy. The setup for the in operando XANES measurements can be viewed as a valuable analytical tool that can aid the understanding of the sulfur environment in Li–S batteries.     

Radially Inwardly Aligned Hierarchical Porous Carbon for Ultra‐Long‐Life Lithium–Sulfur Batteries

Rational design of hollow micro‐ and/or nano‐structured cathodes as sulfur hosts has potential for high‐performance lithium‐sulfur batteries. However, their further commercial application is hindered because infusing sulfur into hollow hosts is hard to control and the interactions between high loading sulfur and electrolyte are poor. Herein, we designed hierarchical porous hollow carbon nanospheres with radially inwardly aligned supporting ribs to mitigate these problems. Such a structure could aid the sulfur infusion and maximize sulfur utilization owing to the well‐ordered pore channels. This highly organized internal carbon skeleton can also enhance the electronic conductivity. The hollow carbon nanospheres with further nitrogen‐doping as the sulfur host material exhibit good capacity and excellent cycling performance (0.044 % capacity degradation per each cycle for 1000 cycles).     

The Quest for Polysulfides in Lithium–Sulfur Battery Electrolytes: An Operando Confocal Raman Spectroscopy Study

Confocal Raman spectra of a lithium–sulfur battery electrolyte are recorded operando in a depth‐of‐discharge resolved manner for an electrochemical cell with a realistic electrolyte/sulfur loading ratio. The evolution of various possible polysulfides is unambiguously identified by combining Raman spectroscopy data with DFT simulations.     

Dual‐Confined Sulfur Nanoparticles Encapsulated in Hollow TiO2 Spheres Wrapped with Graphene for Lithium–Sulfur Batteries

Lithium–sulfur (Li?S) batteries are attractive owing to their higher energy density and lower cost compared with the universally used lithium‐ion batteries (LIBs), but there are some problems that stop their practical use, such as low utilization and rapid capacity‐fading of the sulfur cathode, which is mainly caused by the shuttle effect, and the uncontrollable deposition of lithium sulfide species. Herein, we report the design and fabrication of dual‐confined sulfur nanoparticles that were encapsulated inside hollow TiO₂ spheres; the encapsulated nanoparticles were prepared by a facile hydrolysis process combined with acid etching, followed by “wrapping” with graphene (G?TiO₂@S). In this unique composite architecture, the hollow TiO₂ spheres acted as effective sulfur carriers by confining the polysulfides and buffering volume changes during the charge‐discharge processes by means of physical force from the hollow spheres and chemical binding between TiO₂ and the polysulfides. Moreover, the graphene‐wrapped skin provided an effective 3D conductive network to improve the electronic conductivity of the sulfur cathode and, at the same time, to further suppress the dissolution of the polysulfides. As results, the G?TiO₂@S hybrids exhibited a high and stable discharge capacity of up to 853.4 mA h g^?1 over 200 cycles at 0.5 C (1 C=1675 mA g^?1) and an excellent rate capability of 675 mA h g^?1 at a current rate of 2 C; thus, G?TiO₂@S holds great promise as a cathode material for Li?S batteries.     

In Situ Self-Polymerization to Form Hollow Graphitized Carbon Nanocages with Embedded Cobalt Nanoparticles for High-Performance Lithium–Sulfur Batteries

Lithium–sulfur batteries, owing to the multi-electron participation in the redox reaction, possess enormous energy density, which has aroused much attention. Nevertheless, the detrimental shuttle effect, volume expansion, and electrical insulation of sulfur, have hindered their application. To improve the cyclability, a functional host, consisting of Co nanoparticles and N-doped hollow graphitized carbon (Co-NHGC) material, is elaborated, which has the advantages of: 1) the graphitized carbon material working as an electronic matrix to improve the utilization rate of sulfur; 2) the hollow structure relieving the stress change caused by volume expansion; 3) the rich active sites catalyze the electrochemical reaction of sulfur and entrap polysulfides. These advantages significantly improve the performance of the lithium–sulfur batteries. Accordingly, the S@Co-NHGC cathode exhibits excellent initial specific capacity, high coulombic efficiency, and excellent rate performance. This work utilizes a novel method of dopamine in situ etching of a metal–organic framework to synthetize the Co-NHGC host of sulfur, which will hopefully provide inspiration for other energy materials.     

Hierarchical Hollow Nanoprisms Based on Ultrathin Ni‐Fe Layered Double Hydroxide Nanosheets with Enhanced Electrocatalytic Activity towards Oxygen Evolution

The oxygen evolution reaction (OER) is involved in various renewable energy systems, such as water‐splitting cells and metal–air batteries. Ni‐Fe layered double hydroxides (LDHs) have been reported as promising OER electrocatalysts in alkaline electrolytes. The rational design of advanced nanostructures for Ni‐Fe LDHs is highly desirable to optimize their electrocatalytic performance. Herein, we report a facile self‐templated strategy for the synthesis of novel hierarchical hollow nanoprisms composed of ultrathin Ni‐Fe LDH nanosheets. Tetragonal nanoprisms of nickel precursors were first synthesized as the self‐sacrificing template. Afterwards, these Ni precursors were consumed during the hydrolysis of iron(II) sulfate for the simultaneous growth of a layer of Ni‐Fe LDH nanosheets on the surface. The resultant Ni‐Fe LDH hollow prisms with large surface areas manifest high electrocatalytic activity towards the OER with low overpotential, small Tafel slope, and remarkable stability.     

Dual Protection of Sulfur by Carbon Nanospheres and Graphene Sheets for Lithium–Sulfur Batteries

Well‐confined elemental sulfur was implanted into a stacked block of carbon nanospheres and graphene sheets through a simple solution process to create a new type of composite cathode material for lithium–sulfur batteries. Transmission electron microscopy and elemental mapping analysis confirm that the as‐prepared composite material consists of graphene‐wrapped carbon nanospheres with sulfur uniformly distributed in between, where the carbon nanospheres act as the sulfur carriers. With this structural design, the graphene contributes to direct coverage of sulfur to inhibit the mobility of polysulfides, whereas the carbon nanospheres undertake the role of carrying the sulfur into the carbon network. This composite achieves a high loading of sulfur (64.2 wt %) and gives a stable electrochemical performance with a maximum discharge capacity of 1394 mAh g^?1 at a current rate of 0.1 C as well as excellent rate capability at 1 C and 2 C. The improved electrochemical properties of this composite material are attributed to the dual functions of the carbon components, which effectively restrain the sulfur inside the carbon nano‐network for use in lithium–sulfur rechargeable batteries.     

V2O5空心球作为高效硫载体用于锂硫电池（英文）

以V2O5空心球作为锂硫电池的正极材料,将其用于存储硫和限制多硫化物的穿梭效应。V2O5空心球的平均直径约为500 nm,为存储硫提供了更多空间并适应硫电极的体积变化。同时,V2O5对多硫化物具有很强的化学吸附性,可以有效地限制多硫化物的穿梭效应。由于中空结构增加了硫的存储,并通过化学键牢固地吸附多硫化物,使该锂硫电池同时具有高容量和良好的稳定性。V2O5/S作为正极的锂硫电池在0.1C倍率时显示出1439 mAh·g-1的高可逆容量,并在1C的倍率下循环300次后的容量约为600 mAh·g-1。     

Sulfur Encapsulated in a TiO2‐Anchored Hollow Carbon Nanofiber Hybrid Nanostructure for Lithium–Sulfur Batteries

A hollow carbon nanofiber hybrid nanostructure anchored with titanium dioxide (HCNF@TiO₂) was prepared as a matrix for effective trapping of sulfur and polysulfides as a cathode material for Li–S batteries. The synthesized composites were characterized and examined by X‐ray diffraction, nitrogen adsorption–desorption measurements, field‐emission scanning electron microscopy, scanning transmission electron microscopy, and electrochemical methods such as galvanostatic charge/discharge, rate performance, and electrochemical impedance spectroscopy tests. The obtained HCNF@TiO₂–S composite showed a clear core–shell structure with TiO₂ nanoparticles coating the surface of the HCNF and sulfur homogeneously distributed in the coating layer. The HCNF@TiO₂–S composite exhibited much better electrochemical performance than the HCNF–S composite, which delivered an initial discharge capacity of 1040 mA h g^?1 and maintained 650 mAh g^?1 after 200 cycles at a 0.5 C rate. The improvements of electrochemical performances might be attributed to the unique hybrid nanostructure of HCNF@TiO₂ and good dispersion of sulfur in the HCNF@TiO₂–S composite.     

Sulfur‐Impregnated Core–Shell Hierarchical Porous Carbon for Lithium–Sulfur Batteries

Core–shell hierarchical porous carbon spheres (HPCs) were synthesized by a facile hydrothermal method and used as host to incorporate sulfur. The microstructure, morphology, and specific surface areas of the resultant samples have been systematically characterized. The results indicate that most of sulfur is well dispersed over the core area of HPCs after the impregnation of sulfur. Meanwhile, the shell of HPCs with void pores is serving as a retard against the dissolution of lithium polysulfides. This structure can enhance the transport of electron and lithium ions as well as alleviate the stress caused by volume change during the charge–discharge process. The as‐prepared HPC‐sulfur (HPC‐S) composite with 65.3 wt % sulfur delivers a high specific capacity of 1397.9 mA h g^?1 at a current density of 335 mA g^?1 (0.2 C) as a cathode material for lithium–sulfur (Li‐S) batteries, and the discharge capacity of the electrode could still reach 753.2 mA h g^?1 at 6700 mA g^?1 (4 C). Moreover, the composite electrode exhibited an excellent cycling capacity of 830.5 mA h g^?1 after 200 cycles.     

Enhanced Multiple Anchoring and Catalytic Conversion of Polysulfides by Amorphous MoS3 Nanoboxes for High-Performance Li-S Batteries

The practical implementation of lithium–sulfur batteries is obstructed by poor conductivity, sluggish redox kinetics, the shuttle effect, large volume variation, and low areal loading of sulfur electrodes. Now, amorphous N-doped carbon/MoS₃ (NC/MoS₃) nanoboxes with hollow porous architectures have been meticulously designed as an advanced sulfur host. Benefiting from the enhanced conductivity by the N-doped carbon, reduced shuttle effect by the strong chemical interaction between unsaturated Mo and lithium polysulfides, improved redox reaction kinetics by the catalytic effect of MoS₃, great tolerance of volume variation and high sulfur loading arising from flexible amorphous materials with hollow-porous structures, the amorphous NC/MoS₃ nanoboxes enabled sulfur electrodes to deliver a high areal capacity with superior rate capacity and decent cycling stability. The synthetic strategy can be generalized to fabricate other amorphous metal sulfide nanoboxes.     

Coaxial Carbon/MnO2 Hollow Nanofibers as Sulfur Hosts for High‐Performance Lithium‐Sulfur Batteries

Lithium‐sulfur (Li‐S) batteries have recently attracted a large amount of attention as promising candidates for next‐generation high‐power energy storage devices because of their high theoretical capacity and energy density. However, the shuttle effect of polysulfides and poor conductivity of sulfur are still vital issues that constrain their specific capacity and cyclic stability. Here, we design coaxial MnO₂‐graphitic carbon hollow nanofibers as sulfur hosts for high‐performance lithium‐sulfur batteries. The hollow C/MnO₂ coaxial nanofibers are synthesized via electrospinning and carbonization of the carbon nanofibers (CNFs), followed by an in situ redox reaction to grow MnO₂ nanosheets on the surface of CNFs. The inner graphitic carbon layer not only maintains intimate contact with sulfur and outer MnO₂ shell to significantly increase the overall electrical conductivity but also acts as a protective layer to prevent dissolution of polysulfides. The outer MnO₂ nanosheets restrain the shuttle effect greatly through chemisorption and redox reaction. Therefore, the robust S@C/MnO₂ nanofiber cathode delivers an extraordinary rate capability and excellent cycling stability with a capacity decay rate of 0.044 and 0.051 % per cycle after 1000 cycles at 1.0 C and 2.0 C, respectively. Our present work brings forward a new facile and efficient strategy for the functionalization of inorganic metal oxide on graphitic carbons as sulfur hosts for high performance Li‐S batteries.     

Ferroelectric Metal–Organic Framework as a Host Material for Sulfur to Alleviate the Shuttle Effect of Lithium–Sulfur Battery

Ferroelectricity has an excellent reversible polarization conversion behavior under an external electric field. Herein, we propose an interesting strategy to alleviate the shuttle effect of lithium–sulfur battery by utilizing ferroelectric metal–organic framework (FMOF) as a host material for the first time. Compared to other MOF with same structure but without ferroelectricity and commercial carbon black, the cathode based on FMOF exhibits a low capacity decay and high cycling stability. These results demonstrate that the polarization switching behaviors of FMOF under the discharge voltage of lithium–sulfur battery can effectively trap polysulfides by polar–polar interactions, decrease polysulfides shuttle and improve the electrochemical performance of lithium–sulfur battery.     

Developing A “Polysulfide‐Phobic” Strategy to Restrain Shuttle Effect in Lithium–Sulfur Batteries

Inspired by hydrophobic interface, a novel design of “polysulfide‐phobic” interface was proposed and developed to restrain shuttle effect in lithium–sulfur batteries. Two‐dimensional VOPO₄ sheets with adequate active sites were employed to immobilize the polysulfides through the formation of a V?S bond. Moreover, owing to the intrinsic Coulomb repulsion between polysulfide anions, the surface anchored with polysulfides can be further evolved into a “polysulfide‐phobic” interface, which was demonstrated by the advanced time/space‐resolved operando Raman evidences. In particular, by introducing the “polysulfide‐phobic” surface design into separator fabrication, the lithium–sulfur battery performed a superior long‐term cycling stability. This work expands a novel strategy to build a “polysulfide‐phobic” surface by “self‐defense” mechanism for suppressing polysulfides shuttle, which provides new insights and opportunities to develop advanced lithium–sulfur batteries.     

Enhanced Electrochemical Kinetics on Conductive Polar Mediators for Lithium–Sulfur Batteries

Lithium–sulfur (Li–S) batteries have been recognized as promising substitutes for current energy‐storage technologies owing to their exceptional advantage in energy density. The main challenge in developing highly efficient and long‐life Li–S batteries is simultaneously suppressing the shuttle effect and improving the redox kinetics. Polar host materials have desirable chemisorptive properties to localize the mobile polysulfide intermediates; however, the role of their electrical conductivity in the redox kinetics of subsequent electrochemical reactions is not fully understood. Conductive polar titanium carbides (TiC) are shown to increase the intrinsic activity towards liquid–liquid polysulfide interconversion and liquid–solid precipitation of lithium sulfides more than non‐polar carbon and semiconducting titanium dioxides. The enhanced electrochemical kinetics on a polar conductor guided the design of novel hybrid host materials of TiC nanoparticles grown within a porous graphene framework (TiC@G). With a high sulfur loading of 3.5 mg cm^?2, the TiC@G/sulfur composite cathode exhibited a substantially enhanced electrochemical performance.