Twisted N‐Doped Nano‐Graphenes: Synthesis,Characterization, and Resolution

Two diastereoisomeric N‐doped nanographene derivatives have been efficiently prepared in two synthetic steps starting from an ethynylated hexaazatriphenylene building block. The first derivative adopts a D₃‐symmetrical propeller‐shaped structure with three equivalent nanographene foils. The structure of the second diastereoisomer is C₂‐symmetrical and differs from the first one by the way two peripheral nanographene foils overlap. Owing to their intertwined structures, the two N‐doped nanographenes are soluble in organic solvents and could be characterized by a combination of several analytical tools. Resolution of the D₃‐symmetrical derivative has been achieved and CD measurements revealed extremely strong Cotton effects.     

A Dipleiadiene‐Embedded Aromatic Saddle Consisting of 86 Carbon Atoms

This study presents a new type of negatively curved nanographene (C₈₆H₃₂) that contains an unprecedented pattern of heptagons. A tert‐butylated derivative of C₈₆H₃₂ was successfully synthesized using tetrabenzodipleiadiene as a key building block. This synthesis involved a ring expansion reaction as a key step to form the seven‐membered rings in the framework of tetrabenzodipleiadiene. The single‐crystal structure reveals a saddle‐shaped molecule with a highly bent naphthalene moiety at the center of the polycyclic backbone. As found from the DFT calculations, this aromatic saddle is flexible at room temperature and has a saddle‐shaped geometry as the dominant conformation. The DFT calculations along with experimental results show that the attachment of t‐butyl groups to the central tetrabenzodipleiadiene moiety of nanographene C₈₆H₃₂ can stabilize the saddle conformation and make this nanographene less flexible.     

An Electron‐Poor C64 Nanographene by Palladium‐Catalyzed Cascade C−C Bond Formation: One‐Pot Synthesis and Single‐Crystal Structure Analysis

Herein, we report the one‐pot synthesis of an electron‐poor nanographene containing dicarboximide groups at the corners. We efficiently combined palladium‐catalyzed Suzuki–Miyaura cross‐coupling and dehydrohalogenation to synthesize an extended two‐dimensional π‐scaffold of defined size in a single chemical operation starting from N‐(2,6‐diisopropylphenyl)‐4,5‐dibromo‐1,8‐naphthalimide and a tetrasubstituted pyrene boronic acid ester as readily accessible starting materials. The reaction of these precursors under the conditions commonly used for Suzuki–Miyaura cross‐coupling afforded a C₆₄ nanographene through the formation of ten C?C bonds in a one‐pot process. Single‐crystal X‐ray analysis unequivocally confirmed the structure of this unique extended aromatic molecule with a planar geometry. The optical and electrochemical properties of this largest ever synthesized planar electron‐poor nanographene skeleton were also analyzed.     

3‐(1H‐Pyrrol‐2‐yl)‐1H‐pyrazole forms an unusual hydrogen‐bonded two‐dimensional (3,4)‐connected net

The title compound, C₇H₇N₃, is the first crystallographically characterized 1H‐pyrrolyl‐1H‐pyrazole derivative and contains two unique molecules in its asymmetric unit (Z′ = 2). These molecules associate into centrosymmetric tetramers through N—H...N hydrogen bonding, including a cyclic dimerization of one of the two unique pyrazole rings. These tetramers are linked further by two weaker N—H...π contacts to give a novel two‐dimensional (3,4)‐connected net with a (3².8)₂(3.8²)₂ topology.     

Comparative evaluation of new Cookson‐type reagents for LC/ESI‐MS/MS assay of 25‐hydroxyvitamin D3 in neonatal blood samples

The screening of vitamin D deficiency in neonatal infants, which is based on the blood 25‐hydroxyvitamin D₃ [25(OH)D₃] quantification, is important for the early detection, diagnosis and health risk assessment of several diseases. In this study, two new Cookson‐type reagents, 4‐(4‐diethylaminophenyl)‐1,2,4‐triazoline‐3,5‐dione (DEAPTAD) and 4‐(6‐quinolyl)‐1,2,4‐triazoline‐3,5‐dione, were designed and synthesized, then compared with the previous reagents, 4‐phenyl‐1,2,4‐triazoline‐3,5‐dione (PTAD) and 4‐(4‐dimethylaminophenyl)‐1,2,4‐triazoline‐3,5‐dione (DAPTAD), in terms of sensitivity and specificity in the assay of 25(OH)D₃ in neonatal blood samples by liquid chromatography/electrospray ionization–tandem mass spectrometry. Among the reagents, DEAPTAD was found to be the most promising. The limit of detection (0.38 fmol on the column) of the DEAPTAD‐derivatized 25(OH)D₃ was 60 and 2 times lower than those of the intact 25(OH)D₃ and the PTAD derivative, respectively. 25(OH)D₃ was more clearly detected in the plasma sample as the DEAPTAD derivative than the DAPTAD derivative owing to the lower background noise. DEAPTAD derivatization was also useful for the separation of 25(OH)D₃ from a potent interfering metabolite, 3‐epi‐25‐hydroxyvitamin D₃. By using DEAPTAD, a trace amount of 25(OH)D₃ in dried blood spots was reproducibly determined without interference from coexisting compounds. Thus, DEAPTAD was proved useful in the measurement of 25(OH)D₃ in neonatal blood samples. Copyright © 2015 John Wiley & Sons, Ltd.     

1,3‐Bis(ethylamino)‐2‐nitrobenzene, 1,3‐bis(n‐octylamino)‐2‐nitrobenzene and 4‐ethylamino‐2‐methyl‐1H‐benzimidazole

1,3‐Bis(ethylamino)‐2‐nitrobenzene, C₁₀H₁₅N₃O₂, (I), and 1,3‐bis(n‐octylamino)‐2‐nitrobenzene, C₂₂H₃₉N₃O₂, (II), are the first structurally characterized 1,3‐bis(n‐alkylamino)‐2‐nitrobenzenes. Both molecules are bisected though the nitro N atom and the 2‐C and 5‐C atoms of the ring by twofold rotation axes. Both display intramolecular N—H...O hydrogen bonds between the amine and nitro groups, but no intermolecular hydrogen bonding. The nearly planar molecules pack into flat layers ca 3.4 Å apart that interact by hydrophobic interactions involving the n‐alkyl groups rather than by π–π interactions between the rings. The intra‐ and intermolecular interactions in these molecules are of interest in understanding the physical properties of polymers made from them. Upon heating in the presence of anhydrous potassium carbonate in dimethylacetamide, (I) and (II) cyclize with formal loss of hydrogen peroxide to form substituted benzimidazoles. Thus, 4‐ethylamino‐2‐methyl‐1H‐benzimidazole, C₁₀H₁₃N₃, (III), was obtained from (I) under these reaction conditions. Compound (III) contains two independent molecules with no imposed internal symmetry. The molecules are linked into chains via N—H...N hydrogen bonds involving the imidazole rings, while the ethylamino groups do not participate in any hydrogen bonding. This is the first reported structure of a benzimidazole derivative with 4‐amino and 2‐alkyl substituents.     

Hydrogen‐bonding versusπ–π stacking interactions in dipyrido[f,h]quinoxaline‐6,7‐dicarbonitrile and 6,7‐dicyanodipyrido[f,h]quinoxalin‐1‐ium chloride dihydrate

The solvent‐free title compound, C₁₆H₆N₆, is an aromatic derivative of phenanthroline with an extended π system. It exhibits a remarkable π–π columnar stacking in the crystal structure, with interplanar distances of 3.229 (3) and 3.380 (3) Å, the shorter spacing being between the two molecules within the asymmetric unit. Adjacent units along the stacked arrays are rotated in‐plane with respect to one another by approximately 120°. The hydrochloride derivative, C₁₆H₇N₆⁺·Cl⁻·2H₂O, in which one of the phenanthroline N atoms has been protonated, crystallized as a dihydrate. The supramolecular organization in this compound is characterized by continuous hydrogen bonding between the component species, yielding two‐dimensional hydrogen‐bonded networks. This study demonstrates the high significance of the π–π stacking interactions in the solvent‐free aromatic system and how they can be undermined by introducing hydrogen‐bonding capacity into the ligand.     

Palladium‐mediated Cleavage of S–C Bonds: Preparation and Characterization of Palladium(II) Complexes of 2, 6‐Diformyl‐4‐tert‐butylthiophenol Dioxime

The synthesis of air‐sensitive 2, 6‐diformyl‐4‐tert‐butylthiophenol dioxime H₃L3 was achieved by a Pd‐mediated S–C cleavage of the corresponding S‐tert‐butyl protected thioether. The novel ligand forms a dinuclear, neutral Pd^II₂ complex, which is stabilized by two N ··· HO hydrogen bonds to give a pseudo‐macrocyclic structure. The crystal structure of a Pd^II complex of an oxidized isothiazole derivative of H₃L3 is also reported.     

Regioselective Cage Opening of La2@D2(10611)‐C72 with 5,6‐Diphenyl‐3‐(2‐pyridyl)‐1,2,4‐triazine

The thermal reaction of the endohedral metallofullerene La₂@D₂(10611)‐C₇₂, which contains two pentalene units at opposite ends of the cage, with 5,6‐diphenyl‐3‐(2‐pyridyl)‐1,2,4‐triazine proceeded selectively to afford only two bisfulleroid isomers. The molecular structure of one isomer was determined using single‐crystal X‐ray crystallography. The results suggest that the [4+2] cycloaddition was initiated in a highly regioselective manner at the C? C bond connecting two pentagon rings of C₇₂. Subsequent intramolecular electrocyclization followed by cycloreversion resulted in the formation of an open‐cage derivative having three seven‐membered ring orifices on the cage and a significantly elongated cage geometry. The reduction potentials of the open‐cage derivatives were similar to those of La₂@D₂‐C₇₂ whereas the oxidation potentials were shifted more negative than those of La₂@D₂‐C₇₂. These results point out that further oxidation could occur easily in the derivatives.     

Compositing Amorphous TiO2 with N‐Doped Carbon as High‐Rate Anode Materials for Lithium‐Ion Batteries

Compositing amorphous TiO₂ with nitrogen‐doped carbon through Ti? N bonding to form an amorphous TiO₂/N‐doped carbon hybrid (denoted a‐TiO₂/C? N) has been achieved by a two‐step hydrothermal–calcining method with hydrazine hydrate as an inhibitor and nitrogen source. The resultant a‐TiO₂/C? N hybrid has a surface area as high as 108 m² g^?1 and, when used as an anode material, exhibits a capacity as high as 290.0 mA h g^?1 at a current rate of 1 C and a reversible capacity over 156 mA h g^?1 at a current rate of 10 C after 100 cycles; these results are better than those found in most reports on crystalline TiO₂. This superior electrochemical performance could be ascribed to a combined effect of several factors, including the amorphous nature, porous structure, high surface area, and N‐doped carbon.     

Unveiling 79‐Year‐Old Ixene and Its BN‐Doped Derivative

Polycyclic aromatic hydrocarbons (PAHs) are key components of organic electronics. The electronic properties of these carbon‐rich materials can be controlled through doping with heteroatoms such as B and N, however, few convenient syntheses of BN‐doped PAHs have been reported. Described herein is the rationally designed, two‐step syntheses of previously unknown ixene and BN‐doped ixene (B₂N₂‐ixene), and their characterizations. Compared to ixene, B₂N₂‐ixene absorbs longer‐wavelength light and has a smaller electrochemical energy gap. In addition to its single‐crystal structure, scanning tunneling microscopy revealed that B₂N₂‐ixene adopts a nonplanar geometry on a Au(111) surface. The experimentally obtained electronic structure of B₂N₂‐ixene and the effect of BN‐doping were confirmed by DFT calculations. This synthesis enables the efficient and convenient construction of BN‐doped systems with extended π‐conjugation that can be used in versatile organic electronics applications.     

Tuning the Surface Structure of Nitrogen‐Doped TiO2 Nanofibres—An Effective Method to Enhance Photocatalytic Activities of Visible‐Light‐Driven Green Synthesis and Degradation

Nitrogen‐doped TiO₂ nanofibres of anatase and TiO₂(B) phases were synthesised by a reaction between titanate nanofibres of a layered structure and gaseous NH₃ at 400–700 °C, following a different mechanism than that for the direct nitrogen doping from TiO₂. The surface of the N‐doped TiO₂ nanofibres can be tuned by facial calcination in air to remove the surface‐bonded N species, whereas the core remains N doped. N‐Doped TiO₂ nanofibres, only after calcination in air, became effective photocatalysts for the decomposition of sulforhodamine B under visible‐light irradiation. The surface‐oxidised surface layer was proven to be very effective for organic molecule adsorption, and the activation of oxygen molecules, whereas the remaining N‐doped interior of the fibres strongly absorbed visible light, resulting in the generation of electrons and holes. The N‐doped nanofibres were also used as supports of gold nanoparticle (Au NP) photocatalysts for visible‐light‐driven hydroamination of phenylacetylene with aniline. Phenylacetylene was activated on the N‐doped surface of the nanofibres and aniline on the Au NPs. The Au NPs adsorbed on N‐doped TiO₂(B) nanofibres exhibited much better conversion (80 % of phenylacetylene) than when adsorbed on undoped fibres (46 %) at 40 °C and 95 % of the product is the desired imine. The surface N species can prevent the adsorption of O₂ that is unfavourable for the hydroamination reaction, and thus, improve the photocatalytic activity. Removal of the surface N species resulted in a sharp decrease of the photocatalytic activity. These photocatalysts are feasible for practical applications, because they can be easily dispersed into solution and separated from a liquid by filtration, sedimentation or centrifugation due to their fibril morphology.     

Water Soluble Gold(I)‐diacetyl‐1,3,5‐triaza‐7‐phosphaadamantane‐arylazoimidazole Complexes: Synthesis and Spectroscopic Study

Reaction of [Au(DAPTA)(Cl)] with RaaiR’ in CH2Cl2 medium following ligand addition leads to [Au(DAPTA)(RaaiR’)](Cl) [DAPTA＝diacetyl-1,3,5-triaza-7-phosphaadamantane, RaaiR’＝p-R-C6H4-N＝N- C3H2-NN-1-R’, (1—3), abbreviated as N,N’-chelator, where N(imidazole) and N(azo) represent N and N’, respectively; R＝H (a), Me (b), Cl (c) and R’＝Me (1), CH2CH3 (2), CH2Ph (3)]. The 1H NMR spectral measurements in D2O suggest methylene, CH2, in RaaiEt gives a complex AB type multiplet while in RaaiCH2Ph it shows AB type quartets. 13C NMR spectrum in D2O suggest the molecular skeleton. The 1H-1H COSY spectrum in D2O as well as contour peaks in the 1H-13C HMQC spectrum in D2O assign the solution structure.     

Synthesis,properties and solid state structure of 5‐diphenylphosphino‐2‐hydroxy‐1,3‐xylyl‐18‐crown‐5

5‐Diphenylphosphino‐2‐hydroxy‐1,3‐xylyl‐18‐crown‐5 has been synthesized from 5‐bromo‐2‐hydroxy‐18‐crown‐5 by reacting it in sequence at low temperature with n‐butyl lithium and methyl diphenylphosphonite. The phosphorous donor properties of this phenol phosphine (OH derivative) and the corresponding phenoxide (O^? derivative) have been studied in the presence and absence of alkali metal ions by determining the frequencies of the A₁ ν(CO) bands of Ni(CO)₃L complexes. For the OH and O^? derivatives, the latter generated by addition of CsOH to the former, the ν(CO) bands are observed at 2067.6 and 2063.4 cm^?1, respectively, providing the trend predicted by Hammett parameters for OH and O^? substituents. Addition of Na⁺ or K⁺ to the OH derivative has little effect on this stretching frequency, but the former ion shifts the O^? derivative band to 2067.7 cm^?1 A solid state structure has been obtained of the OH derivative, and two independent molecules were found in the unit cell. Both have a single water molecule hydrogen bonded to two across‐ring oxygen atoms and the phenol hydrogen. The crown ether ring has the usual gauche and anti arrangements for the C‐C and C? O bonds.     

N,N′‐Dicyclohexyl‐N‐[4‐(1H‐indol‐3‐yl)butanoyl]urea

The title compound, C₂₅H₃₅N₃O₂, is a novel urea derivative. Pairs of intermolecular N—H...O hydrogen bonds join the molecules into centrosymmetric R₂²(12) and R₂²(18) dimeric rings, which are alternately linked into one‐dimensional polymeric chains along the [010] direction. The parallel chains are connected via C—H...O hydrogen bonds to generate a two‐dimensional framework structure parallel to the (001) plane. The title compound was also modelled by solid‐state density functional theory (DFT) calculations. A comparison of the molecular conformation and hydrogen‐bond geometry obtained from the X‐ray structure analysis and the theoretical study clearly indicates that the DFT calculation agrees closely with the X‐ray structure.     

Practical Enzymatic Desymmetrization of 2‐(Ethoxycarbonyl)propane‐1,3‐diyl Dihexanoate and Model Cyclization for the A–D Ring System of Lysergic Acid

Porcine pancreas lipase‐catalyzed hydrolysis of symmetrical 2‐(ethoxycarbonyl)propane‐1,3‐diyl dihexanoate, under the modified conditions of the Seebach protocol, afforded a desymmetrized monohexanoate in 40–51% yield with 91–94% ee, even in a gram‐scale reaction. The absolute configuration of a half‐hydrolyzed (?)‐product was determined to be (R) by conversion to a known 2‐methylpropane‐1,3‐diol derivative. Samarium iodide‐induced radical cyclization of 2‐oxo‐3‐phenylethylamine with a C₄ unit on the N‐atom, derived from the racemic monohexanoate, afforded a 3‐phenylpiperidine derivative as a model construction of the A–D ring system of lysergic acid.     

Metal‐Free Electrocatalyst for Oxygen Reduction: Synthesis‐Controlled Density of Catalytic Centers and Impact on ORR

This work demonstrates a rapid and scalable route for the preparation of N‐doped carbon spheres of 80–120 nm via pyrolysis of polypyrrole as the only carbon and nitrogen source. The resulting porous catalyst has a nitrogen doping level of 6–8 at%. Electrochemical studies show that N‐doped C is very active toward oxygen reduction in alkaline electrolyte and the mechanism of ORR process is controlled by the surface concentration of catalytic active sites that promote either a direct four‐electron or two‐electron process. An interesting observation is that we can generate precursors for the N‐doped carbon with desirable particle size, shape and with the preferential structure (linear polypyrrole from the α? α coupling during slow polymerization or cross‐linked polypyrrole from α? β coupling during fast polymerization) that promotes the formation of favorable catalytic sites for O₂ reduction. The XPS analysis in conjunction with RDE voltammetry highlights the effect of polymer precursor synthesis on the chemical structure and a resulting electrochemical activity of the N‐doped carbon materials.     

The Proportion of Fe‐NX,N Doping Species and Fe3C to Oxygen Catalytic Activity in Core‐Shell Fe‐N/C Electrocatalyst

A bifunctional oxygen electrocatalyst composed of iron carbide (Fe₃C) nanoparticles encapsulated by nitrogen doped carbon sheets is reported. X‐ray photoelectron spectroscopy and X‐ray absorption near edge structure revealed the presence of several kinds of active sites (Fe?N_x sites, N doping sites) and the modulated electron structure of nitrogen doped carbon sheets. Fe₃C@N‐CSs shows excellent oxygen evolution and oxygen reduction catalytic activity owing to the modulated electron structure by encapsulated Fe₃C core via biphasic interfaces electron interaction, which can lower the free energy of intermediate, strengthen the bonding strength and enhance conductivity. Meanwhile, the contribution of the Fe?N_x sites, N doping sites and the effect of Fe₃C core for the electrocatalytic oxygen reaction is originally revealed. The Fe₃C@N‐CSs air electrode‐based zinc‐air battery demonstrates a high open circuit potential of 1.47 V, superior charge‐discharge performance and long lifetime, which outperforms the noble metal‐based zinc‐air battery.     

Unusual hydrate stabilization in the two‐dimensional layered structure of quinacrinium bis(2‐carboxy‐4,5‐dichlorobenzoate) tetrahydrate,a proton‐transfer compound of the drug quinacrine

The crystal structure of the hydrated proton‐transfer compound of the drug quinacrine [rac‐N′‐(6‐chloro‐2‐methoxyacridin‐9‐yl)‐N,N‐diethylpentane‐1,4‐diamine] with 4,5‐dichlorophthalic acid, C₂₃H₃₂ClN₃O²⁺·2C₈H₃Cl₂O₄⁻·4H₂O, has been determined at 200 K. The four labile water molecules of solvation in the structure form discrete ...O—H...O—H... hydrogen‐bonded chains parallel to the quinacrine side chain, the two N—H groups of which act as hydrogen‐bond donors for two of the water acceptor molecules. The other water molecules, as well as the acridinium H atom, also form hydrogen bonds with the two anion species and extend the structure into two‐dimensional sheets. Between these sheets there are also weak cation–anion and anion–anion π–π aromatic ring interactions. This structure represents the third example of a simple quinacrine derivative for which structural data are available but differs from the other two in that it is unstable in the X‐ray beam due to efflorescence, probably associated with the destruction of the unusual four‐membered water chain structures.     

Probing the Electronic Structure and Photoactivation Process of Nitrogen‐Doped TiO2 Using DRS,PL, and EPR

The electronic structure and photoactivation process in N‐doped TiO₂ is investigated. Diffuse reflectance spectroscopy (DRS), photoluminescence (PL), and electron paramagnetic resonance (EPR) are employed to monitor the change of optical absorption ability and the formation of N species and defects in the heat‐ and photoinduced N‐doped TiO₂ catalyst. Under thermal treatment below 573 K in vacuum, no nitrogen dopant is removed from the doped samples but oxygen vacancies and Ti³⁺ states are formed to enhance the optical absorption in the visible‐light region, especially at wavelengths above 500 nm with increasing temperature. In the photoactivation processes of N‐doped TiO₂, the DRS absorption and PL emission in the visible spectral region of 450–700 nm increase with prolonged irradiation time. The EPR results reveal that paramagnetic nitrogen species (N_s^.), oxygen vacancies with one electron (V_o^.), and Ti³⁺ ions are produced with light irradiation and the intensity of N_s^. species is dependent on the excitation light wavelength and power. The combined characterization results confirm that the energy level of doped N species is localized above the valence band of TiO₂ corresponding to the main absorption band at 410 nm of N‐doped TiO₂, but oxygen vacancies and Ti³⁺ states as defects contribute to the visible‐light absorption above 500 nm in the overall absorption of the doped samples. Thus, a detailed picture of the electronic structure of N‐doped TiO₂ is proposed and discussed. On the other hand, the transfer of charge carriers between nitrogen species and defects is reversible on the catalyst surface. The presence of oxygen‐vacancy‐related defects leads to quenching of paramagnetic N_s^. species but they stabilize the active nitrogen species N_s^?.