Electrochemical and Electrochemiluminescence Determination of Cancer Cells Based on Aptamers and Magnetic Beads

The electrochemical and electrochemiluminescence (ECL) detection of cell lines of Burkitt’s lymphoma (Ramos) by using magnetic beads as the separation tool and high‐affinity DNA aptamers for signal recognition is reported. Au nanoparticles (NPs) bifunctionalized with aptamers and CdS NPs were used for electrochemical signal amplification. The anodic stripping voltammetry technology employed for the analysis of cadmium ions dissolved from CdS NPs on the aggregates provided a means to quantify the amount of the target cells. This electrochemical method could respond down to 67 cancer cells per mL with a linear calibration range from 1.0×10² to 1.0×10⁵ cells mL^?1, which shows very high sensitivity. In addition, the assay was able to differentiate between target and control cells based on the aptamer used in the assay, indicating the wide applicability of the assay for diseased cell detection. ECL detection was also performed by functionalizing the signal DNA, which was complementary to the aptamer of the Ramos cells, with tris(2,2‐bipyridyl) ruthenium. The ECL intensity of the signal DNA, replaced by the target cells from the ECL probes, directly reflected the quantity of the amount of the cells. With the use of the developed ECL probe, a limit of detection as low as 89 Ramos cells per mL could be achieved. The proposed methods based on electrochemical and ECL should have wide applications in the diagnosis of cancers due to their high sensitivity, simplicity, and low cost.     

Immunosensor for the determination of <Emphasis Type="Italic">Staphylococcus aureus</Emphasis> using a tyrosinase–mercaptopropionic acid modified electrode as an amperometric transducer

An amperometric immunosensor for the quantification of Staphylococcus aureus based on the coimmobilization of rabbit immunoglobulin G (RbIgG) and tyrosinase on a mercaptopropionic acid self-assembled monolayer modified gold electrode is reported. A competitive mode in which protein-A-bearing S. aureus cells and antiRbIgG labeled with alkaline phosphatase (AP) compete for the binding sites of immobilized RbIgG was used. Monitoring of the affinity reaction was carried out by the amperometric detection at -0.15 V of phenol generated in the enzyme reaction with AP, at the tyrosinase-modified electrode through the electrochemical reduction of the o-quinone formed. Optimization of the working variables, such as the immunosensor composition and incubation times, the applied potential, the working pH and the concentration of phenyl phosphate used as the AP substrate, was carried out. Under the optimized conditions, both the repeatability of the measurements and the reproducibility of the responses obtained with different immunosensors yielded relative standard deviation values for the steady-state current lower than 10%. The immunosensor showed a dynamic range from 4.4x10(5) to 1.8x10(7) S. aureus cells mL(-1), with a detection limit of 1.7x10(5) cells mL(-1). The limit of detection was remarkably improved by subjecting S. aureus cells to wall lysis by heat treatment. The value obtained was 2.3x10(3) cells mL(-1), which is adequate for the monitoring of S. aureus contamination levels in some foodstuffs. As an application, milk samples spiked with bacteria at the 4.8x10(3) cells mL(-1) level were analyzed.     

基于生物条形码的粘蛋白和特定细胞电化学发光适配体生物传感方法研究

本文基于适配体识别和生物条形码放大策略,以MCF-7细胞和粘蛋白(MUC1)为目标物,MUC1的特异性适配体(rcDNA)为分子识别物质,Ru(phen)32+为信号物质,rcDNA通过巯基自组装于金电极表面作为传感界面,发卡DNA (hpDNA)和rcDNA通过巯基自组装在金纳米粒子(AuNP)表面合成的hpDNA/...     

分子信标研究5-氟尿嘧啶对鼻咽癌HNE1细胞p33ING1基因转录水平的影响

p33ING1作为一种重要的抑癌基因，在乳腺癌及胃癌等恶性肿瘤细胞中的mRNA表达水平显著低于癌旁正常组织细胞中的表达，并导致这些肿瘤细胞的侵袭转移能力增强，对化疗药物及r射线和紫外线处理的敏感性降低。     

Microchip electrophoresis with chemiluminescence detection for assaying ascorbic acid and amino acids in single cells

A method based on microchip electrophoresis (MCE) with chemiluminescence (CL) detection was developed for the determination of ascorbic acid (AA) and amino acids including tryptophan (Trp), glycine (Gly) and alanine (Ala) present in single cells. Cell injection, loading, lysing, electrophoretic separation and CL detection were integrated onto a simple cross microfluidic chip. A single cell was loaded in the cross intersection by electrophoretic means through applying a set of potentials at the reservoirs. The docked cell was lysed rapidly under a direct electric field. The intracellular contents were MCE separated within 130 s. CL detection was based on the enhancing effects of AA and amino acids on the CL reaction of luminol with K₃[Fe(CN)₆]. Rat hepatocytes were prepared and analyzed as the test cellular model. The average intracellular contents of AA, Trp, Gly and Ala in single rat hepatocytes were found to be 38.3, 5.15, 3.78 and 3.84 fmol (n = 12), respectively.     

Quantification of taurine and amino acids in mice single fibrosarcoma cell by microchip electrophoresis coupled with chemiluminescence detection

A method based on MCE coupled with chemiluminescence (CL) detection was developed for the determination of taurine (Tau) and amino acids including alanine (Ala), glycine (Gly), tryptophan (Trp), glutamic acid (Glu) and aspartic acid (Asp) present in mice single fibrosarcoma (S180) cells. Cell injection, loading, cytolysis, electrophoretic separation and CL detection were integrated onto a simple double‐T microfluidic chip. The intracellular constituents were electrophoretically separated within 150 s. The CL detection was based on the enhancement effects of Tau and amino acids on the CL reaction of luminol with H₂O₂ and Cu²⁺. The average amounts of Tau, Trp, Gly, Ala, Glu and Asp in per S180 cell from a cell population were 4.73, 1.23, 2.65, 1.94, 1.61 and 1.99 fmol. Ten S180 cells were analyzed, and the contents of Tau, Trp, Gly, Ala, Glu and Asp in mice single S180 cells were found to be in the range of 1.78–8.84, 0.95–2.31, 1.08–6.87, 1.03–4.05, 0.84–2.61 and 0.82–3.68 fmol, respectively. This work demonstrates that MCE coupled with CL detection is a useful analytical tool that is simple, quick and highly sensitive for single‐cell analysis.     

A vertically aligned carbon nanotube-based impedance sensing biosensor for rapid and high sensitive detection of cancer cells

A novel vertically aligned carbon nanotube based electrical cell impedance sensing biosensor (CNT-ECIS) was demonstrated for the first time as a more rapid, sensitive and specific device for the detection of cancer cells. This biosensor is based on the fast entrapment of cancer cells on vertically aligned carbon nanotube arrays and leads to mechanical and electrical interactions between CNT tips and entrapped cell membranes, changing the impedance of the biosensor. CNT-ECIS was fabricated through a photolithography process on Ni/SiO(2)/Si layers. Carbon nanotube arrays have been grown on 9 nm thick patterned Ni microelectrodes by DC-PECVD. SW48 colon cancer cells were passed over the surface of CNT covered electrodes to be specifically entrapped on elastic nanotube beams. CNT arrays act as both adhesive and conductive agents and impedance changes occurred as fast as 30 s (for whole entrapment and signaling processes). CNT-ECIS detected the cancer cells with the concentration as low as 4000 cells cm(-2) on its surface and a sensitivity of 1.7 × 10(-3)Ω cm(2). Time and cell efficiency factor (TEF and CEF) parameters were defined which describe the sensor's rapidness and resolution, respectively. TEF and CEF of CNT-ECIS were much higher than other cell based electrical biosensors which are compared in this paper.     

Autoantibody detection by direct counting of antigen-displayed yeast cells

In this study, we report a new immunoassay platform based on yeast surface display technology for detection of autoantibodies involved in autoimmune diseases, e.g., systemic lupus erythematosus (SLE) and Sj?gren's syndrome (SS). The autoantigens of Ro52/SSA epitope and SmD were chosen to be displayed on the yeast surface with their respective antibodies as the analytes. By using magnetic beads modified with protein G, yeast cells bound with specific target antibody can be captured. The amount of analytes could be determined by counting the number of fluorescent yeast cells captured in a magnetic field. The platform showed promising results in the detection of SLE autoantibodies with high sensitivity and multiplex detection capability over the traditional approaches.     

Yoctomole analysis of ganglioside metabolism in PC12 cellular homogenates

We report an ultrasensitive method for the analysis of glycosphingolipid catabolism. The substrate G(M1) and the set of seven metabolites into which it can be degraded (G(A1), G(M2), G(A2), G(M3), LacCer, GlcCer, and Cer) were labeled with the highly fluorescent dye tetramethylrhodamine. CE with LIF detection was used to assay these compounds with 150 +/- 80 yoctomole mass (1 ymol = 10(-24) mol = 0.6 copies) detection limits and 5 +/- 3 pM concentration detection limits. An alignment algorithm based on migration of two components was employed to correct for drift in the separation. The within-day and between-day precision in peak height was 20%, in peak width 15%, and in adjusted migration time 0.03%. After normalization to total sample injected, the RSD in peak height reduced to 2-6%, which approaches the limit set by molecular shot noise in the number of molecules taken for analysis. PC12 cells were incubated with the labeled G(M1). Fluorescent microscopy demonstrated uptake by the cells. CE was used to separate a cellular homogenate prepared from these cells. A set of peaks was observed, which were tentatively identified based on comigration with the standards. Roughly 120 pL of homogenate was injected, which contained a total of 150 zmol of labeled substrate and products. Metabolite that preserves the fluorescent label can be detected at the yoctomole level, which should allow characterization of this metabolic pathway in single cells.     

Three‐dimensional microfluidic chip with twin‐layer herringbone structure for high efficient tumor cell capture and release via antibody‐conjugated magnetic microbeads

Harvesting rare circulating tumor cells (CTCs) from human blood is distinctly substantial to monitor tumor stage and evaluate therapeutic efficacy. As a proof‐of‐concept study, a microfluidic chip with twin‐layer herringbone grooves was developed to isolate and recover tumor cells with high efficiency based on the immunoreaction between cells and antibody‐conjugated microbeads (MBs) under local magnetic field. Functional MBs were initially localized onto the internal channel wall through the magnetic guidance. Then, infused tumor cells were deviated into the herringbone groove via passive microvortex and were further trapped through an irreversible interaction with MBs. Upon the removal of magnet, the captured cells and residual MBs were released from the channel and collected for further analysis in cell adhesion and proliferation in vitro. Capture efficiency of tumor cells reached up to ∼90% and limit of detection was down to 50 cells per mL based on this approach. Furthermore, recovery rate of tumor cells was as high as ∼94%, and potencies of cell attachment and proliferation was well maintained in retrieved cells. Hence, the present technique has a great potential for the isolation, quantitation and recovery of CTCs for cancer theranostic guidance and biomolecular analysis.     

An ultra-sensitive DNA assay based on single-molecule detection coupled with hybridization accumulation and its application

An ultra-sensitive assay for quantification of DNA based on single-molecule detection coupled with hybridization accumulation was developed. In this assay, target DNA (tDNA) in solution was accumulated on a silanized substrate blocked with ethanolamine and bovine serum albumin (BSA) through a hybridization reaction between tDNA and capture DNA immobilized on the substrate. The tDNA on the substrate was labeled with quantum dots which had been modified with detection DNA and blocked with BSA. The fluorescence image of single QD-labeled tDNA molecules on the substrate was acquired using total internal reflection fluorescence microscopy. The tDNA was quantified by counting the bright dots on the image from the QDs. The limit of detection of the DNA assay was as low as 6.4 × 10(-18) mol L(-1). Due to the ultra-high sensitivity, the DNA assay was applied to measure the beta-2-microglobulin messenger RNA level in single human breast cancer cells without a need for PCR amplification.     

Triglyceride Assay by Amperometric Microbial Biosensor: Sample Hydrolysis and Kinetic Approach

ABSTRACT

A triglyceride assay based on triglyceride hydrolysis and glycerol detection was developed. Non-specific lipase isolated from Candida rugosa and intact Gluconobacter oxydans cells, containing membrane-bound glycerol dehydrogenase, were used to develop a biosensor. Two approaches were investigated: analysis of pre-hydrolysed samples and a kinetic approach. The sensor prepared from G. oxydans cells exhibited sensitive and fast response to glycerol: detection limit 20 μM (S/N=3), linear range up to 2 mM and response time 84 s (90% of steady-state). The triglyceride assay of pre-hydrolysed samples was based on a 20 min hydrolysis and determination of released glycerol by the biosensor. A calibration curve linear up to 12 mM was obtained for triolein samples. The kinetic approach was based on simultaneous glyceride hydrolysis and glycerol detection. Analysis time of 10 min, linear range up to 30 mM, and estimated detection limit of 50 μM were achieved using the kinetic approach. The kinetic triglyceride assay is not influenced by free glycerol present in a sample. Storage stability, expressed as a half life (50% of the initial response), was 7 days when trehalose was used as a stabiliser.     

Selective collection and detection of MCF-7 breast cancer cells using aptamer-functionalized magnetic beads and quantum dots based nano-bio-probes

A novel strategy for selective collection and detection of breast cancer cells (MCF-7) based on aptamer–cell interaction was developed. Mucin 1 protein (MUC1) aptamer (Apt1) was covalently conjugated to magnetic beads to capture MCF-7 cell through affinity interaction between Apt1 and MUC1 protein that overexpressed on the surface of MCF-7 cells. Meanwhile, a nano-bio-probe was constructed by coupling of nucleolin aptamer AS1411 (Apt2) to CdTe quantum dots (QDs) which were homogeneously coated on the surfaces of monodispersed silica nanoparticles (SiO₂ NPs). The nano-bio-probe displayed similar optical and electrochemical performances to free CdTe QDs, and remained high affinity to nucleolin overexpressed cells through the interaction between AS1411 and nucleolin protein. Photoluminescence (PL) and square-wave voltammetric (SWV) assays were used to quantitatively detect MCF-7 cells. Improved selectivity was obtained by using these two aptamers together as recognition elements simultaneously, compared to using any single aptamer. Based on the signal amplification of QDs coated silica nanoparticles (QDs/SiO₂), the detection sensitivity was enhanced and a detection limit of 201 and 85 cells mL⁻¹ by PL and SWV method were achieved, respectively. The proposed strategy could be extended to detect other cells, and showed potential applications in cell imaging and drug delivery.     

Preliminary study for rapid determination of phycotoxins in microalgae whole cells using matrix-assisted laser desorption/ionization time-of-flight mass spectrometry

Rapid and sensitive methods for identification of several phycotoxins produced by microalgae species such as yessotoxins (YTXs) for Protoceratium reticulatum, okadaic acid (OA) and pectenotoxins (PTXs) for Prorocentrum spp. and Dinophysis spp., Palytoxins (PLTXs) for Ostreopsis spp., ciguatoxins (CTXs) for Gambierdiscus spp. or domoic acid (DA) for Pseudo-nitzschia spp. are of great importance to the shellfish and fish industry. In this study, matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOFMS) was used to detect several phycotoxins in whole cells of some microalgae which are known as toxin producers. To achieve an appropriate MALDI matrix and a sample preparation method, several matrices and solvent mixtures were tested. The most appropriate matrix system for toxin detection was obtained with 10 μg μL(-1) of DHB in 0.1% TFA/ACN (3:7, v/v) by mixing the intact cells with the matrix solution directly on the MALDI target (dried-droplet technique). Toxin detection by this procedure is much faster than current procedures based on solvent extraction and chromatographic separation. This method allowed the rapid detection of main phycotoxins in some dinoflagellate cells of genus Ostreopsis, Prorocentrum, Protoceratium, Gambierdiscus, Dinophysis and diatoms from Pseudo-nitzschia genus.     

Assembly of Water-soluble AIE-active Fluorescent Organic Nanoparticles for Ratiometric Detection of Hypochlorite in Living Cells

Hypochlorous acid (HOCl) plays a crucial role in many physiological processes and is widely used as bleach, deodorant and fungicide. In this work, we designed an amphiphilic hydrazone fluorescent molecule THG-1 containing hydrophilic sugar units and hydrophobic tetraphenylethylene unit for ratiometric detection of HOCl with high sensitivity and excellent selectivity based on HOCl-triggered hydrolyzation reaction and aggregation-induced emission (AIE) effect. The detection mechanism was verified by liquid chromatograph mass spectrometry experiments and scanning electron microscope (SEM) tests. Contrast experiments revealed that the numbers of lactose unit and hydrazone linker were essential for assembly of THG-1 and detection of HOCl. In addition, THG-1 was successfully used for imaging of exogenous and endogenous HOCl in living cells.     

In situ detection of live cancer cells by using bioprobes based on Au nanoparticles

We fabricate the high-performance probes based on Au nanoparticles (AuNP) for detection of live cancer cell. AuNP were synthesized with narrow sized distribution (ca. 10 nm) by Au salt reduction method and deposited onto the aminated substrate as a cross-linker and hot spot. Herein, AuNP has enabled the easy and efficient immobilization of the antibody (Cetuximab), which can selectively interact with epidermal growth factor receptor (EGFR) on the surface of epidermal cancer, as detecting moiety onto the AuNP-deposited substrate without nanolithography process. After conjugation of Cetuximab with AuNP-deposited substrate, Cetuximab-conjugated probe as a live cancer cell detector (LCCD) could detect EGFR-highexpressed A431 cells related to epithelial cancer with 54-times larger specificity and sensitivity in comparison with EGFR-deficient MCF7 cells. This implies that AuNP-based probes demonstrate abundant potentials for detection and separation of small biomolecules, cells and other chemicals.     

Electrochemiluminescent detection of mucin 1 protein and MCF-7 cancer cells based on the resonance energy transfer

A novel sensing strategy for sensitive detection of mucin 1 protein (MUC1) and MCF-7 cells based on electrochemiluminescence (ECL) resonance energy transfer (ERET) from bis(2,2'-bipyridine)-(5-aminophenanthroline)ruthenium(II) (Ru1) to graphene oxide (GO) was proposed. The MUC1 aptamer was covalently combined with Ru1 (Ru1-aptamer) using aqueous carbodiimide coupling chemistry. Due to the strong noncovalent interaction between the Ru1-aptamer and GO, the ECL of Ru1 was efficiently quenched because of the ERET. In the presence of a target MUC1 protein, the binding between the Ru1-aptamer and MUC1 disturbed the interaction between the Ru1-aptamer and GO. These interactions led to the release of the Ru1-aptamer from GO, and resulted in the restoration of Ru1 ECL. This was shown to detect MUC1 protein sensitively in a linear range from 64.9 to 1036.8 nM with a detection limit of 40 nM. With further application in the detection of MCF-7 cells, the presented method could respond at concentrations as low as 30 cancer cells per mL. By substituting the aptamer and the corresponding target, this method could be conveniently extended for the sensitive detection of other biomolecules.     

Detection of organophosphorus insecticides with immobilized acetylcholinesterase – comparative study of two enzyme sensors

Two-enzyme systems based on acetylcholinesterase (AChE) - a mono-enzyme system based on AChE, with p-aminophenyl acetate as substrate, and a bi-enzyme system based on AChE and tyrosinase, with phenyl acetate as substrate - have been studied for detection of organophosphate insecticides. The analytical performance and detection limits for determination of the pesticides were compared for the two AChE configurations. The enzyme loading, pH, and applied potential of the bi-enzyme system were optimised. When phenyl acetate was used as substrate for AChE activity the phenol generated by enzymatic hydrolysis was determined with a second enzyme, tyrosinase. Amperometric measurements were performed at 100 mV and -150 mV relative to the Ag/AgCl reference electrode for the mono-enzyme and bi-enzyme systems. Screen-printed sensors were used to detect the organophosphorus pesticides paraoxon and chlorpyrifos ethyl oxon; the detection limits achieved with phenyl acetate as substrate were 5.2x10(-3) mg L(-1) and 0.56x10(-3) mg L(-1), respectively.     

The potential of autofluorescence for the detection of single living cells for label-free cell sorting in microfluidic systems

A novel method for studying unlabeled living mammalian cells based on their autofluorescence (AF) signal in a prototype microfluidic device is presented. When combined, cellular AF detection and microfluidic devices have the potential to facilitate high-throughput analysis of different cell populations. To demonstrate this, unlabeled cultured cells in microfluidic devices were excited with a 488 nm excitation light and the AF emission (> 505 nm) was detected using a confocal fluorescence microscope (CFM). For example, a simple microfluidic three-port glass microstructure was used together with conventional electroosmotic flow (EOF) to switch the direction of the fluid flow. As a means to test the potential of AF-based cell sorting in this microfluidic device, granulocytes were successfully differentiated from human red blood cells (RBCs) based on differences in AF. This study demonstrated the use of a simple microfabricated device to perform high-throughput live cell detection and differentiation without the need for cell-specific fluorescent labeling dyes and thereby reducing the sample preparation time. Hence, the combined use of microfluidic devices and cell AF may have many applications in single-cell analysis.