首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 62 毫秒
1.
张明晓  李学刚 《应用化学》2007,24(12):1470-1472
由乙酸酐和H2O2在无硫酸存在下合成过氧乙酸,然后向其滴加1,5-二萘酚的甲醇溶液,在一锅内简便地合成了胡桃醌。产物用苯重结晶,其结构经HPLC、UV-Vis、FTIR、^1H NMR和^13C NMR测试技术进行了表征和证实。考察了原料摩尔比、反应温度和反应时间对产率的影响。最佳反应条件为:n(1,5-二萘酚):n(乙酸酐):n(H2O2)=1:4:8,反应温度为40-60℃,反应时间为5.5h,产率68%。结果表明,一锅法合成不用硫酸,无需真空蒸馏纯化过氧乙酸,是合成胡桃醌的简便方法。  相似文献   

2.
以硫酸氢钾为催化剂,在无溶剂条件下催化2-萘酚和乙酰胺分别与苯甲醛、对硝基苯甲醛、水杨醛、茴香醛、香兰素等五种芳香醛的三组分反应,利用一锅法合成了系列1-乙酰胺烷基-2-萘酚.以1-乙酰胺基苯甲基-2-萘酚(AAN)的合成为模板反应考察了催化剂用量、反应温度、原料配比及反应时间等因素对产物收率的影响.结果表明,硫酸氢钾催化合成AAN反应的适宜条件为:n(2-萘酚)∶n(苯甲醛)∶n(乙酰胺)∶n(硫酸氢钾)=1∶1.2∶1.2∶0.05,90℃下反应40min,AAN的收率达92.1%.硫酸氢钾对其他四种反应也有较理想的催化作用,目标产物收率为69.1%~94.0%.  相似文献   

3.
以4-(3-氯-4-甲氧基苄基氨基)-2-[(2S)-2-羟甲基-1-吡咯烷基]-5-嘧啶羧酸乙酯为原料,合成了4-(3-氯-4-甲氧基苄基氨基)-2-[(2S)-2-羟甲基-1-吡咯烷基]-N-(2-吡啶甲基)-5-嘧啶甲酰胺,研究了此种阿伐那非类似物的合成条件优化,考察了投料比、反应温度、反应时间等因素对产率的影响.获得较高产率的反应条件为n(C6H8N2)∶n(C18H21ClN4O4)∶n(EDCI)∶n(HOBt)∶n(Et3N)=1.2∶1∶1.2∶1.2∶2,在搅拌下,60℃反应6h,经过后处理,柱层析纯化,得到类白色固体产物,产率为84.3%.所合成的产物经FT-IR、1 H NMR、13 C NMR、ESI-MS得到验证.  相似文献   

4.
N-甲基-2-(3,4-二羟基苯基)[60]富勒烯吡咯烷衍生物的合成   总被引:1,自引:0,他引:1  
在N2气保护下,由1,3-偶极环加成反应合成了含2个羟基的C60吡咯烷衍生物:N-甲基-2-(3,4-二羟基苯基)[60]富勒烯吡咯烷. 用UV-Vis、FT-IR、1H NMR、MS等测试技术表征了产物的结构,通过单因素方法,探讨了反应条件对产物产率的影响. 最佳反应条件为:n(C60)∶ n(N-甲基甘氨酸)∶ n(3,4-二羟基苯甲醛)=1∶ 2∶ 5,温度为95 ℃,反应时间为28 h,产率可达66%(以消耗的C60计).  相似文献   

5.
熔融法合成2-芳氧甲基苯并咪唑化合物   总被引:1,自引:0,他引:1  
李英俊  刘丽军  靳煜  王巍  赵楠  李丽娜  李春燕 《有机化学》2009,29(11):1825-1828
以邻苯二胺和芳氧基乙酸为原料, 采用熔融法合成出了10种2-芳氧甲基苯并咪唑化合物, 并利用IR和1H NMR对其结构进行了表征. 在熔融法的合成中, 两种原料物质的量之比为n(邻苯二胺)∶n (芳氧乙酸)=1∶1.1, 反应温度为(180±5) ℃. 该合成方法具有操作简便、反应时间短、后处理容易、副产物少、产率较高、绿色环保等优点.  相似文献   

6.
Brφnsted酸性离子液体催化合成阿司匹林   总被引:7,自引:0,他引:7  
用Brφnsted酸性离子液体[Hmim]BF4、[bmim]HSO4和[bmim]H2PO4代替浓H2SO4为催化剂催化乙酸酐对水杨酸的乙酰化,合成阿司匹林。考察了反应温度、反应时间、催化剂用量、酐/醇摩尔比对水杨酸酰化反应产率的影响和离子液体的重复使用性能。选择了最佳反应条件,以[bmim]H2PO4作为催化剂,催化剂用量为0.28g(1.18×10-3mol),水杨酸2.762g(0.02mol),乙酸酐4.083g(0.04mol),n(酐)∶n(醇)=2∶1,反应时间30min,反应温度70℃,产率最高达63.43%,并且[bmim]H2PO4溶于水后通过过滤和旋蒸脱水,重复使用3次,产率无明显变化。  相似文献   

7.
超声辐射下硫酸催化合成1,1-二乙酸酯   总被引:1,自引:0,他引:1  
在超声波辐射和硫酸催化下由芳香醛和乙酸酐反应合成了系列1,1-二乙酸酯衍生物. 以10 mol%硫酸为催化剂, 芳香醛和乙酸酐的物质的量比为1∶1.6, 25~30 ℃下反应10~15 min, 产物产率可达85.2%~98%. 产物结构经1H NMR和IR确证.  相似文献   

8.
以ω-甲酰基莰烯为主原料,与盐酸羟胺、三水合乙酸钠经亲核加成反应,合成目标化合物2-(3,3-二甲基双环[2. 2. 1]庚-2-亚基)乙醛肟。采用FT-IR、GC-MS、1H NMR和13C NMR等手段对产物进行了表征,确定了产物结构。探讨了溶剂及碱的种类、碱的用量、物料比、反应温度以及反应时间对原料转化率、产物选择性和产率的影响,得到了适宜的工艺条件为:碱为三水合乙酸钠,n(ω-甲酰基莰烯)∶n(盐酸羟胺)∶n(三水合乙酸钠)=1. 0∶1. 2∶2. 0,溶剂为20 m L的75%乙醇,反应温度为70℃,反应时间为2. 5 h。在上述条件下,产物的产率为83. 9%。  相似文献   

9.
无溶剂条件下,以硝酸铋为催化剂,芳香醛、β-酮酯和N-取代脲"一锅法"合成了一系列N1-取代的3,4-二氢嘧啶-2(1H)-酮衍生物。考察了原料用量、催化剂用量和反应温度对实验结果的影响。确定当芳香醛、β-酮酯和N-取代脲的摩尔比为1∶1∶1.3,催化剂用量为3 mol%,反应温度为80℃时,反应时间较短,产率较高。提出了可能的催化作用机理。产品结构经IR、~1H NMR、~(13)C NMR和元素分析进行表征。  相似文献   

10.
以2-萘酚和三氯甲苯为起始原料,异丙醇水溶液作溶剂,非催化条件下合成了1-苯甲酰基-2-萘酚。考察了三氯甲苯用量、醇、水和异丙醇的体积比、溶剂用量及回流反应时间对产率的影响。确定较佳工艺条件为:2-萘酚50 mmol,三氯甲苯60 mmol,异丙醇水溶液18 mL(V水∶V异丙醇=1∶5),回流反应时间2 h,1-苯甲酰基-2-萘酚收率达74%。异丙醇经回收后可重复利用。产品结构经IR,1H NMR,13C NMR及元素分析进行了表征。  相似文献   

11.
用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.  相似文献   

12.
Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.  相似文献   

13.
In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.  相似文献   

14.
The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.  相似文献   

15.
The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.  相似文献   

16.
KMnO4-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.  相似文献   

17.
The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.  相似文献   

18.
A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.  相似文献   

19.
Zhanhui Yang  Shiyi Yang  Jiaxi Xu 《Tetrahedron》2017,73(23):3240-3248
Regiospecific and direct imidation of the methyl C(sp3)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.  相似文献   

20.
A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号