SURFACE OF GELATIN MODIFIED POLY(L-LACTIC ACID)FILM

In this paper, the surface structure of poly(L-lactic acid) (PLLA) film modified with gelatin was investigated. ThePLLA film specimens were treated directly with aqueous alkali solution to provide their surfaces with carboxyl groups, sothat these functional groups could become the reactive sites for gelatin immobilization. The functional groups of the PLLAfilms were identified by ATR-FTIR spectra and XPS spectra, the changes in surface morphology were observed by usingenvironmental scanning electron microscopy (ESEM), and the hydrophilicity of modified PLLA films was examined bywater contact angle measurement. Experimental results showed that the gelatin was immobilized with water-solublecarbodiimide (EDC) onto the PLLA film's surfaces, and the gelatin content on the polymer surface was related to carboxylicgroup formed in the controlled hydrolysis process. Rough surfaces caused by hydrolysis will predominantly favor the adhesion and growth of cell; and the hydrophilicity of these surfaces after the modification procedure is enhanced.     

Preparation and characterization of thermoresponsive hyperbranched polyethylenimine with plenty of reactive primary amine groups

Certain amount of primary amine （NH2） groups of hyperbranched polyethylenimine （HPEI） was first protected by Boc groups. Subsequently, the residual reactive amine groups were reacted with isobutyric anhydride to introduce isobutyramide （IBAm） groups to HPEI. Finally, Boc groups were deprotected to result in HPEI-IBAm-NH2 with 18% of primary amine terminals on the periphery and 80% of IBAm terminal groups （abbreviated as HPEI-IBAm0.80-NH2）. 1H-NMR characterization proved the successful preparation of the product in each step. Compared with its spatial isomer HPEI- IBAm0.8o without primary amine groups, IH-NMR spectra verified that more IBAm groups were located in the interior of HPEI-IBAm0.80-NH2. The further modification of HPEI-IBAmo.so-NH2 and HPEI-IBAmo.8o with p-nitrobenzaldehyde demonstrated that HPEI-IBAm0.so-NH2 was more reactive than HPEI-IBAm0.80 due to its possession of primary amines. Turbidimetry measurements showed that HPEI-IBAm0.80-NH2 was thermoresponsive in water. In the pH range of 9.5-10 its cloud point temperature （Top） was constant, and it increased obviously upon decreasing the pH below 9.5. The thermoresponsive HPEI-IBAmo.8 exhibited the similar trend, but the pH threshold to achieve the constant Top was around 8.5. Moreover, HPEI-IBAm0.8-NH2 showed higher Top and broader phase transition than HPEI-IBAm0.8. The mechanism leading to the different thermoresponsive properties between HPEI-IBAm0.8-NH2 and its spatial isomer HPEI-IBAm0.8 was discussed.     

Polyamides with pendant 1,3,4-oxadiazole and pyridine moieties

A novel aromatic diamine,2-（5-（3,5-diaminophenyl）-l,3,4-oxadiazole-2-yl）pyridine（POBD）,containing a pyridine ring and a 1,3,4-oxadiazole moiety,was synthesized.It was used in a polycondensation with various aromatic and aliphatic diacid chlorides to generate a series of new aromatic polyamides with pendant 1,3,4-oxadiazole groups.The prepared polyamides were characterized by IR,elemental analysis and through the synthesis of model compounds.Thermophysical properties of the synthesized polyamides have been studied by DSC,TGA and inherent viscosity measurements. Relatively high inherent viscosity values（0.76-1.62 dL/g,in 0.125%H₂SO₄ at 25℃） were observed for these compounds. Number average molecular weight（M_n） of the polymers was measured by vapor phase osmometry（VPO）.The introduction of bulky side chains in the structure of aromatic polyamides led to increased solubility of these polymers in common polar and aprotic solvents,such as DMF,DMSO,NMP and DMAc,which allowed thin films to be cast from polymer solutions. The highest molecular weight（M_n = 51190） was observed for polymer（DC）,which was prepared from pyridine-2,6-dichlorocarbonyl.     

功能化荧光素掺杂二氧化硅纳米粒子用于免疫层析试验

A simple but effective approach was developed to synthesize amino functionalized fluorescein isothiocyanate-doped silica nanoparticles based upon polycondensation of tetraethoxysilane. Organic dye molecule (fluorescein isothiocyanate) coupled with a silane coupling agent, 3-aminopropyltriethoxysilane, was incorporated into silica sphere through controlled hydrolysis and polymerization of tetraethoxysilane. The dye was connected with silica sphere through 3-aminopropyltriethoxysilane, which avoided the leakage of the dye. The cohydrolysis and polymerization of tetraethoxysilane and 3-aminopropyltriethoxysilane outside the surface of the silica sphere formed another thin silica shell with the functionalized amino groups on the surface. With amino groups on the surface, the nanoparticle surface was affluent in positive charges. The amino-functionalized nanoparticles were linked with mouse monoclonal antibody against hepatitis B virus surface antigen through electrostatic interaction to form fluorescence probes, which were tested by immunochromatographic assay using immunochromatography test strip. It was indicated that the fluorescence probe was suitable for immunoassay.     

Influence of aliphatic amide terminals on the thermoresponsive properties of hyperbranched polyethylenimines

Acetamide(C2), propionamide(C3), butyramide(C4), isobutyramide(i-C4), isovaleramide(i-C5) and trimethylacetamide(t-C5) groups each were introduced to the terminals of hyperbranched polyethylenimine(HPEI) through the amidation reaction between HPEI and the corresponding anhydride. Moreover, HPEIs terminated with two kinds of amides were also prepared. The first amide was fixed to be i-C4 with 52% degree of amidation(DA), and the second amide varied from C2, C3, C4, i-C5 to t-C5. All the polymers were characterized by 1H-NMR. Turbidimetry measurements were performed for these polymers in water at different temperatures. With respect to the polymers bearing only one kind of amide group, except C2, all the other amide groups could render thermoresponsive properties to HPEI. The specific ordering of these amide groups to reduce the cloud point temperature(Tcp) was as follows: i-C5 t-C5 C4 i-C4 C3. Moreover, the more branched i-C4 and t-C5 were better groups than their less branched isomers C4 and i-C5 in the Tcp range of 12-51 °C to render the sharper phase transition to the thermoresponsive polymers. As for the polymers bearing two kinds of amide groups, the further introduction of C2, C3, C4, i-C5 or t-C5 could effectively endow HPEI bearing 52% of i-C4 with thermoresponsive properties. The specific ordering of these second amide groups to reduce the Tcp was as follows: i-C5 C4 i-C4 C3 C2. C4, i-C5 and t-C5 were all effective second amide groups to prepare the thermoresponsive polymers with sharper phase transition.     

Transferring CdTe Nanoparticles from Liquid Phase to Polyvinylpyrrolidone Nanofibers by Electrospinning and Detecting Its Photoluminesccnce Property

The major aim of this work was to synthesize thio-stabilized CdTe nanoparticles（NPs） in an aqueous solution, which was then enwrapped with cetyltrimethylammonium bromide（CTAB）, and finally transferred to the polyvinylpyrrolidone（PVP） matrix by electrospinning. The PVP nanofibers containing CdTe NPs were characterized by scanning electron microscopy（SEM） and transmission electron microscopy（TEM）, to observe the morphology of the nanofibers and the distribution of CdTe NPs. The selective area electronic diffraction（SAED） pattern verified that CdTe NPs were cubic lattice. The photoluminescence（PL） spectrum indicated that CdTe NPs existed in an optical style in PVP nanofibers. Moreover, X-ray photoelectron spectra（XPS） revealed that thiol-stabilized CdTe NPs were enwrapped by CTAB, and PVP acted as a dispersant in the process of electrospinning.     

A New Method of Synthesis of Azo Schiff Base Ligands with Azo and Azomethine Donors： Synthesis of N-4-Methoxybenzylidene-2-（3-hydroxyphenylazo）-5-hydroxyaniline and Its Nickel（Ⅱ） Complex

A new method for the synthesis of azo Schiff an base ligand in which the azo and azomethine groups are coordination sites was developed through a Schiff base precursor. The precursor, N-4-methoxybenzylidene-3-hydroxyphenylamine （SB） derived from 3-aminophenol was regioselectively coupled with a diazonium ion para to the hydroxyl group of the amine component of the Schiff base. The para selectivity was controlled by the directing effect of the hydroxyl group. The ligand and its nickel（Ⅱ） complex were characterized by elemental analyses, IR and UV-Vis spectroscopy. The analytical and spectral data supported the mononuclear formulation of the complex with metal to ligand ratio （M ： L = 1 ： 2） and suggested a square planar geometry for the complex.     

Synthesis and study of MPNS/SMA nano-composite tanning agent

The radical polymerization of maleic anhydride（MA）,styrene（ST）with the vinyl groups introduced onto the surface of the nano-sized silica via solution polymerization method was developed.The methacryloxypropyl nano-sized silica（MPNS）was used as macromonomer and polymerized with maleic anhydride and styrene by initiating with BPO in toluene.The structure and properties of MPNS/SMA nano-composite were characterized by FT-IR spectra and TEM.Meanwhile,it was applied as tanning agent compared with the traditional styrene-maleic anhydride copolymer in leather.It was found that the applied leather had better quality characteristics with the addition of the nano-sized silica.     

Coral reef-like polyanaline nanotubes prepared by a reactive template of manganese oxide for supercapacitor electrode

Coral reef-like PANI nanotubes composed of nanopaticles were successfully synthesized by a reactive template of manganese oxide.The structure was characterized by using SEM,TEM,and FT-IR,and the supercapacitive behaviors of these nanotubes were investigated with cyclic voltammetry（CV）,and charge-discharge tests,respectively.A maximum specific capacitance of 533 F/g could be achieved in 1mol/L aqueous H₂SO₄ with the potential range of -0.2 to 0.8 V（vs.the saturated calomel electrode） in a half-cell setup configuration for PANI electrode,suggesting its potential application in the electrode material for electrochemical capacitors.     

Cationic surfmers with benzyl groups: Synthesis and copolymerization with acrylamide

A series of cationic surfmers with benzyl groups（QARBCs）with different R groups on the benzene ring were synthesized and characterized by IR,¹H-NMR,¹³C-NMR.The aggregation of QARBCs was studied by the steady-state fluorescence technique.It turned out that QARBCs had surface activity and their critical micelle concentration（CMC）values varied in the range of 10^-2—10^-3mol/L with slight increase with temperature.The copolymerization of acrylamide（M₁）and QARBCs（M₂）was studied below and above CMC,their reactivity ratios were determined by the Finemann-Ross method.It was found that below CMC,copolymerization took place in a homogeneous system and reactivity ratios of acrylamide and QARBCs were less than 1;while above CMC,reactivity ratios of QARBCs were greater than 1.The copolymerization mechanism of QARBC was observed to be similar to that of micellar polymerization.QARBCs tended to homopolymerization,which gave rise to micro-blocky sequences in the polymer backbone.The Q and e values of QARBCs were calculated according to the Alfrey-Price equation by using r_1（AM）and r_2（qarBC）.Samples of poly（AM-co-QARBC） were prepared above and below CMC and their hydrophobic associations were studied by the steady-state fluorescence spectra and 2D NOESY spectra,and their critical associating concentrations（CAC）were estimated.The results showed that samples of poly（AM-co-QARBC）prepared above CMC had stronger hydrophobic association in aqueous solution than those prepared below CMC.     

Molecule-based modeling of heavy oil

A molecular-level kinetics model has been developed for the pyrolysis of heavy residual oil. Resid structure was modeled in terms of three attribute groups: cores, inter-core linkages, and side chains. The concentrations of attributes were constrained by probability density functions (PDFs) that were optimized by minimizing the difference between the properties of the computational representation-which were obtained by juxtaposing the attributes-to measured properties, which were obtained by analytical chemistry measurements. Computational tools were used to build a reaction network that was constructed based upon model compounds and their associated kinetics. For cases with an intractable number of species, equations were written in terms of the three attribute groups and the molecular composition was retained implicitly through the juxtaposition. These modeling methods were applied to the Shengli and Daqing resids. The composition of the simulated molecular feedstock fit well with analytical chemistry measurements. After simulated pyrolysis, both resids showed representative increases in the weight fractions of lighter hydrocarbons. Relevant end-use properties were predicted for the product mixtures.     

Synthesis of carbon-supported Pd/SnO_2 catalyst for highly selective hydrogenation of 2,4-difluoronitrobenzene

Halogenated anilines have a wide range of applications in the production of pharmaceuticals and agrochemical substances, and thus it is of great importance to develop highly active and selective catalysts for the hydrogenation of halogenated nitrobenzenes. We approach this challenge by probing noble metal/non-noble metal oxide nanoparticles(NPs) catalysts. Carbon-supported Pd/SnO2catalysts were synthesized by the chemical reduction method, and their catalytic activity was evaluated by the hydrogenation reaction of 2,4-difluoronitrobenzene(DFNB) to the corresponding 2,4-difluoroaniline(DFAN), showing a remarkable synergistic effect of the Pd and SnO2 NPs. The as-prepared Pd/SnO2/C catalysts were characterized using TEM, XRD, H2 TPD and XPS techniques. Modifications to the electronic structure of the Pd atoms through the use of SnO2 led to the suppression of the hydrogenolysis of the C–F bond and the acceleration of nitrosobenzene(DFNSB) conversion and consequently, resulted in the inhibition of the formation of reactive by-products and may be responsible for the enhancements observed in selectivity.     

Photocatalytic Synthesis of Gold Nanoparticles Using Preyssler Acid and Their Photocatalytic Activity

Preyssler acid H14[NaP5W30O110] was used as reducing agent and stabilizer for the synthesis of gold nanoparticles by photolysis of Au(III)/Preyssler acid/propan-2-ol solution.Preyssler acid plays both the role of transferring electrons from propan-2-ol to Au(III) and stabilizing the nanoparticles.Propan-2-ol was used as sacrificial reagent for the photoformation of reduced Preyssler acid.Gold nanoparticles (Au NPs) were characterized by UV-Vis spectroscopy,transmission electron microscopy (TEM),and particle size distribution (PSD) measurements.The synthesized Au NPs had a uniform hexagonal morphology and their size was about 17 nm.The catalytic performance of these NPs for photodegradation of methyl orange (MeO) was investigated in aqueous solution.UV-Vis studies showed that Au NPs can catalyze photodegradation of this azo dye.The pseudo-first-order rate constants were also calculated for this reaction.     

利用脱镁叶绿酸甲酯的化学修饰合成红紫素酰亚胺衍生物

A series of novel purpurin-18 imide derivatives exhibiting long wavelength absorption and amphiphilicity wereobtained from methyl pheophorbide-a(MPa)by modification of the peripheral functional groups.The vinyl groupat 3-position was oxidized with OsO_4 and NaIO_4 to form the formyl group and the Grignard reaction of this alde-hyde with the alkyl magnesium bromide was carried out to give the corresponding 3-(1-hydroxylalkyl)pheophor-bide-a.The E-ring of these chlorines was converted into anhydride ring to give purpurin derivatives by air oxidation.The trans-3~2-alkyl purpurin derivatives were obtained by dehydration of hydroxyl group at 3~1-position.TheN-hydroxyl purpurin imide was generated by treatment of the anhydride ring with bydroxylamine hydrochloride.The 3~1-alkylacyl-N-hydroxyl purpurin imides were obtained by oxidation of hydroxyl group at 3~1-position.Theacylation of N-hydroxyl group was completed to afford N-acyloxy purpurin imides.The photocytoxicity of severalcompounds in vitro were tested.     

Carbon-Supported Silver Catalysts for CO Selective Oxidation in Excess Hydrogen

Carbon materials were used as supports for Ag catalysts that are prepared using the conventional wet impregnation method, and their catalytic properties for CO selective oxidation in excess hydrogen at temperatures below 483 K were tested. A variety of techniques, e.g. N2 adsorption, XPS, TPD, UV-Vis DRS, TEM and SEM, were used to determine the influence of physical and chemical properties of the carbon on the properties of Ag catalyst. It was found that defects on the carbon surface served as nucleation sites for silver ions, while functional groups on carbon surface induced their reduction to the metallic form. The formation of silver particles on carbon was governed by homogeneous and/or heterogeneous nucleation during the impregnation and subsequent activation processes. The best catalytic performance was obtained with a Ag/carbon black catalyst with a uniform size distribution of silver nanoparticles (about 12 nm), moderate BET surface area (with a mesoporous structure), and a limited amount of carbon-oxygen groups. The research indicates that carbon materials are potentially good supports for silver catalysts for preferential oxidation of CO in excess hydrogen.     

Hyperbranched Poly（amide-ester） Mildly Synthesized and Its Characterization

AB2-type-prepolymerized monomer was rapidly （2 h） prepared at room temperature （25 ℃） using commercially available maleic anhydride （MA） and diethanolamine （DEA） as raw materials. By employing toluene-p-sulfonic acid as a catalyzer, a series of hyperbranched poly（amide-ester） （HBPAE） were successfully synthesized from prepared AB2 monomer by solution condensation polymerization through ＂one-step process＂ or ＂pseudo one-step process＂ （using pentaerythritol as a center core）. The processes were carried out at high temperature of 120 ℃ for 6 h in air atmosphere （inert protection free） with reduced pressure distillation （0.08--0.096 MPa）. The results of FT-IR, UV-Vis, TGA, and intrinsic viscosity testing by Ubbelodhe viscometer showed that the prepared HBPAEs possess three-dimensional configuration with unsaturated conjugate structure, large numbers of branches and numerous terminal hydroxyl groups. These result in their low viscosity, high solubility and thermal stability.     

CHARGE-TRANSFER AND ENERGY-TRANSFER IN THE PHOTO-INDUCED COPOLYMERIZATION OF 2-VINYLNAPHTHALENE WITH MALEIC ANHYDRIDE

The initiation mechanism of the copolymerization of 2-vinylnaphthalene with maleic anhydride was studied under irradiation of 365 nm. The excited complex was formed from (1) the local excitation of 2-vinylnaphthalene followed by the charge-transfer interaction with maleic anhydride and (2) the excitation of the ground state charge-transfer complex, and then it collapsed to 1,4-tetramethylene biradical for initiation. A1: 1 alternating copolymer was formed in different monomer feeds. Addition of benzophenone could greatly enhance the rate of copolymerization through energy-transfer mechanism.     

Influence of Backbone Structure on Properties of Directly Polymerized Phenoxy Resins from Epichlorohydrin and Various Aromatic Dihydric Phenols Monomers

A series of phenoxy resins was directly prepared through the polymerization of each of the various aromatic dihydric phenols and epichlorohydrin.FTIR and 1H NMR spectra were recorded to characterize the structures of the re-sins.The GPC curves were used to determine the molecular weight distribution.In addition,the thermal properties of the resins were studied with differential scanning calorimetry(DSC)and thermal gravimetric analysis(TGA).The thermal stabilities of the polymers increased with the content of the benzene ring,pendant group increasing or biphenyl groups emerging.The adhesive properties of the polymers were evaluated in terms of the lap shear strength with Fe-Fe adherends.The fracture mechanisms were determined by SEM observation and it was found that there was an important participation of cohesive fracture mechanisms.Also,it has been demonstrated that the extension of these micro-cohesive mechanisms is directly correlated with the adhesive strength.According to these results,the phenoxy resin containing biphenyl groups presented a higher adhesive strength and could improve the adhesive property of the epoxy/phenoxy system to a certain extent.     

The amphiphilic multiarm copolymers based on hyperbranched polyester and lysine: Synthesis and self-assembly

The amphiphilic multiarm copolymers were synthesized through the modification of commercially available hyperbranched polyesters(Boltorn H40) with N-ε-carbobenzoxy-L-Lysine N-carboxyanhydride(ZLys-NCA).After being condensed with N-Boc-phenylalanine(Boc-~NPhe) and deprotected the Boc-groups in trifluoroacetic acid(TFA),the original terminal hydroxyl groups were transformed into the amino groups and then initiated the ring-opening polymerization of ZLys-NCA.The hydrophilic poly(L-lysine) was grafted to the surface of Boltorn H40 successfully after the protecting benzyl groups were removed by the HBr solution in glacial acetic acid(33 wt%).The resulting multiarm copolymers were characterized by the ~1H-NMR,GPC and FTIR.The arm length calculated by NMR and GPC analysis was about 3 and 13 lysine-units for H40-Phe-PLysl and H40-Phe-PLys2 respectively.Due to the amphiphilic molecular structure,they displayed ability to self-assemble into spherical micelles in aqueous solution with the average diameter in the range from 70 nm to 250 nm.The CMC of H40-Phe-PLysl and H40-Phe-PLys2 was 0.013 mg/mL and 0.028 mg/mL,respectively, indicating that H40-Phe-PLysl with shorter arm length is easier to self-assemble than H40-Phe-PLys2 with longer arm length.