Effect of soft segment length on the thermal behaviors of fluorinated polyurethanes

Differential scanning calorimetry (DSC) and temperature modulated DSC (MDSC) have been applied to investigate the thermal behaviors of fluorinated polyurethanes (FPU), which were obtained using 2,2,3,3-tetrafluoro-1, 4-butanediol as the chain extender and based on various soft segments—polytetramethyl oxides (PTMO) with molecular weights of 650, 1000, 1400 and 2000. An exothermic peak and/or multiple melting endotherms were observed during the heating to melting temperature of soft and hard segments. Attributed to the simultaneous recrystallization and melting processes during heating, these features have been confirmed via MDSC, where an endotherm and an exotherm were noted in reversing and non-reversing components of the heat flow. Separating the non-reversing components from the reversing curves, the dependencies of polyurethane morphology on the length of the soft segment could be clarified using MDSC analysis. Soft segment lengthening significantly influences the morphology of soft segment domains in FPUs. The phase separation and crystallinity of the soft segment increased with its length. However, soft segment length exerted a minor influence on the dissociation temperature of the short-range ordered hard segment domain and on the melting temperature of hard segment crystals. Examination of the heats of melting based on the quasi-isothermal MDSC experiments indicated that the crystallinity of hard segment domains declined with increasing soft segment length.     

Synthesis and characterization of fluorinated polyurethane with fluorine-containing pendent groups

A novel fluorinated polyurethane （FPU） with fluorine-containing pendent groups was prepared by using fluorinated polyether glycol （PTMG-g-HFP） as a soft segment, 1,6-hexamethylene diisocyanate （HDI） or toluene diisocyanate （TD1） as a hard segment and 1,4-butanodiol （BDO） as a chain extender. FTIR, ^1H NMR, ^13C NMR and GPC were used to characterize the structure of the fluorinated polyurethane. Thermal stabilities of the fluorinated polyurethane and the corresponding hydrogenated polyurethane were studied by TGA. XPS analysis at two different sampling depths for the fluorinated polyurethane was used to investigate the surface compositions of FPU. The results showed the fluorine enrichment on the surface of FPU.     

Synthesis and properties of fluorinated thermoplastic polyurethane elastomer

A series of fluorinated thermoplastic polyurethane elastomers (FTPU) based on self-synthesized fluorinate polyether diol (PFGE) were prepared by two-step polymerization. For the purpose of improving the molecular weight and mechanical property of FTPU, polybutylene adipate (PBA) was used to be compounded with PFGE as the soft-segment of FTPU. Effects of the mass ratio of PFGE/PBA and the mass fraction of hard-segment on the mechanical property of FTPU were investigated. The structure and morphology of FTPU were characterized by FTIR, GPC, DMA, surface tension and AFM analysis.     

Synthesis, characterization and properties of a novel fluorinated polyurethane

A novel fluorinated polyurethane (FPU) was prepared by fluorinated polyether glycol (PTMG-g-HFP) as a soft segment, 1,6-hexamethylene diisocyanate (HDI) or toluene diisocyanate (TDI) as a hard segment and 1,4-butanodiol (BDO) as a chain extender. Fourier transform infrared spectroscopy (FTIR), ¹H NMR, ¹³C NMR and gel permeation chromatography (GPC) were used to characterize the structure of the fluorinated polyurethane. The thermal stabilities of the fluorinated polyurethane and the corresponding hydrogenated polyurethane were studied by thermogravimetric analysis (TGA). X-ray photoelectron spectroscopy (XPS) analysis at two different sampling depths for the fluorinated polyurethane was used to investigate the surface compositions of FPU. And the mechanical properties of the fluorinated polyurethane and the corresponding hydrogenated polyurethane were also measured. Chemical resistance of polyurethane films was estimated through spot tests with different solvents. The results showed that FPU had high thermal stability, strain-hardening property and good chemical resistance. The XPS measurements showed the fluorine enrichment on the surface of FPU.     

Effect of phase separation on the crystallization of soft segments of green waterborne polyurethanes

Effect of phase separation on the crystallization of soft segments of green waterborne polyurethanes (WPUs) was discussed in this paper. Phase separation was studied through dynamic mechanical analysis and energy dispersive spectrometer. Energy dispersive spectrometer was employed originally for the study of phase separation of polyurethanes in our study. Crystallization of soft segments of green WPUs was characterized by differential scanning calorimetry, X-ray diffraction and polarizing optical microscope. Characterization results indicated that phase separation hindered the crystallization of soft segments of green WPUs; higher phase separation degree gave rise to lower crystallization capacity, lower crystallinity and smaller crystals of soft segments.     

Syntheses and Surface Properties of Polyacrylonitrile-based Copolymer Membranes Containing Sugar Moieties

Introduction Asatypeofwidelyusedmembranematerials, polyacrylonitrile(PAN)hasbeeninvestigatedby manyresearchersinthefieldsofpervaporation,ul- trafiltration,anddialysis[1_4].However,PAN- basedmembranesarerelativelyhydrophobicwitha lowbiocompatibility.Thesepropertieslimittheir furtherapplicationsinaqueoussolutionseparation andtheirusageasbiomedicaldevices.Muchatten- tionhasbeenpaidtoimprovingthecharacteristics ofPAN-basedmembranes.Thecopolymerization ofANwithhydrophilicmonomersisconsideredas…     

Effect of the poly(oxytetramethylene)diol spacer length on some properties of liquid crystalline polyurethanes

Previous studies on liquid crystalline polyurethanes prepared from 4,4′-bis(2-hydroxyethoxy)biphenyl (BHBP) and 2,4-tolylene diisocyanate (TDI) were continued. In this article, a series of polyurethanes, which differ in the flexible spacer length and BHBP content is described. Poly(oxytetramethylene)diols of different molecular weights (PTMO, M _n = 250, 650, 1000, 2000) were used as flexible spacers. The polyurethanes were investigated by DSC, polarizing microscopy, x-ray diffractometry, and IR spectroscopy. The molecular weight distribution was determined by GPC. The morphology of the polyurethanes was investigated by the SALS method. Partial replacement of BHBP by 25–75 mol % PTMO and the flexible spacer length influence the liquid crystalline properties, the phase transition temperatures, and the range of mesophase occurrence. © 1993 John Wiley & Sons, Inc.     

The effect of segment length and concentration on dielectric properties of polypropyleneoxide-based polyurethanes

Three series of segmented polyurethanes based on MDI, variable chain extender, and polypropylene oxide of MW=1000, 2000, and 3000 were synthesized and their dielectric behavior examined.Dielectric relaxations in the segmented polyurethanes were investigated between –150°C and +150°C in the 100 Hz to 10 kHz range. In general, three transitions, designated as, , and were observed, and ascribed in accordance with calorimetric relaxations to glass transitions of the hard and soft segments, and Shatzki-type motions, respectively. The effect of structure variables such as soft segment size, type of chain extender (ethylene glycol, butane diol, and hexane diol) and soft segment concentration, as well as the effect of interaction of the phases on dielectric properties was discussed. It was found that a certain degree of phase mixing exists in all series, detected by the variation of theT _g of the soft segment with soft segment concentration, contrary to DSC results, which was ascribed to thermal treatment prior to the dielectric measurements. It appears that interfacial polarization becomes important only above the transition temperature.     

Synthesis and characterization of copolymers based on styrene and partially fluorinated acrylates

Copolymers of styrene and fluorinated acrylate monomers with F-octylalkyl, F(CF₂)₈(CH₂)_n^′ side groups were prepared by free radical polymerization. Thermal behaviour of the resulting polymers was investigated by DSC and TGA. Even if at the macroscopic scale the polymers surfaces are homogeneous and clear, the analysis indicates that all samples exhibit two glass transitions temperatures. This discontinuity may be regarded as an indication for microphase separation of fluorine-rich and polystyrene-rich microphases. Water and hexadecane contact angles measurements show that these polymers are quite surface active in the solid state. Surface and bulk organizations were investigated by XPS analysis. A strong correlation between bulk organization and surface properties of the polymers could be established. Preferential adsorption of fluorinated segments at the material surface were more pronounced than expected in the bulk.     

UV-curable low-surface-energy fluorinated poly(urethane-acrylate)s for biomedical applications

Novel UV-curable fluorinated poly(urethane-acrylate) (FPUA) oligomers have been synthesized from 1H,1H,12H,12H-perfluoro-1,12-dodecanediol (PFDDOL), either 1,6-hexamethylene diisocyanate (HDI) or 4,4′-diphenylmethane diisocyanate (MDI), and 2-hydroxyethyl methacrylate (HEMA) for end-capping with photo-crosslinkable methacrylate groups. The fluorine content and the nature of the isocyanate were investigated to determine their effects on the physical properties, surface properties, and blood compatibilities of the polymers. The introduction of hydrophobic fluorocarbon chains led to phase separation and a low total surface energy, which reduced the adhesion of blood platelets onto the materials. The HDI-type UV-curable, fluorinated poly(urethane-acrylate) exhibited a low-surface-energy and superior blood compatibility (as determined from RIPA values).     

Effect of different surfactants on colloidal and polymer properties of fluorinated acrylate latex

Fluorinated acrylate latex was successfully prepared by semi-continuous seeded emulsion polymerization of dodecafluoroheptyl methacrylate (DFMA) with butyl acrylate (BA), methyl methacrylate (MMA) initiated by potassium persulfate in the water. The resultant latexes and their films are characterized with Fourier transform infrared (FTIR) spectrometry, contact angle determinator, dynamic light scattering detector and surface tension determinator. Effect of different surfactants on colloidal and polymer properties of fluorinated acrylate latex was studied. Results show that the latex prepared with sodium dodecyl benzene sulfonate surfactant has the smallest particle size and contact angle but the moderate surface tension. The latex prepared with perfluorooctanesulfonic acid potassium surfactant has the smallest surface tension, moderate particle size but the biggest contact angle. The latex prepared with sodium 2-hydroxy-3-(methacryloyloxy) prop- ane-1-sulfonate surfactant has the biggest particle size and surface tension but moderate contact angle. In addition, the latex prepared with sodium 2-hydroxy-3-(methacryloyloxy) prop- ane-1-sulfonate has higher electrolyte stability.     

Surface properties and aggregate morphology of partially fluorinated carboxylate-type anionic gemini surfactants

Three anionic homologues of a novel partially fluorinated carboxylate-type anionic gemini surfactant, N,N′-di(3-perfluoroalkyl-2-hydroxypropyl)-N,N′-diacetic acid ethylenediamine (2 edda, where n represents the number of carbon atoms in the fluorocarbon chain (4, 6, and 8)) were synthesized. In these present gemini surfactants, the relatively small carboxylic acid moieties form hydrophilic head groups. The surface properties or structures of the aggregates of these surfactants are strongly influenced by the nonflexible fluorocarbons and small head groups; this is because these surfactants have a closely packed molecular structure. The equilibrium surface tension properties of these surfactants were measured at 298.2 K for various fluorocarbon chain lengths. The plot of the logarithm of the critical micelle concentration (cmc) against the fluorocarbon chain lengths for 2 edda (n = 4, 6, and 8) showed a minimum for n = 6. Furthermore, the lowest surface tension of 2 edda at the cmc was 16.4 mN m⁻¹. Such unique behavior has not been observed even in the other fluorinated surfactants. Changes in the shapes and sizes of these surfactant aggregate with concentration were investigated by dynamic light scattering and transmission electron microscopy (TEM). The TEM micrographs showed that in an aqueous alkali solution, 2 edda mainly formed aggregates with stringlike (n = 4), cagelike (n = 6), and distorted bilayer structures (n = 8). The morphological changes in the aggregates were affected by the molecular structure composed of nonflexible fluorocarbon chains and flexible hydrocarbon chains.     

Emulsifier-free latex of fluorinated acrylate copolymer

Emulsifier-free latices of fluorinated acrylate copolymers were prepared by semicontinuous polymerization method, with perfluoroalkylethyl methacrylate (Zonyl TM) as a fluoromonomer. Ultrasonic at 40 kHz was adopted to help monomers disperse well in water. The relationships of polymerization conditions between the final conversion and polymerization stability were discussed in detail and the optimal polymerization condition was given. A fluorinated acrylate copolymer was finally obtained and its T_g was 54 °C. The average particle size of the latex was about 601 nm and the particle size distribution of the latex was narrow. The latex film exhibited a low surface free energy and good surface property. By using 6% Zonyl TM, the water contact angle of the film-air interface increased significantly and reached to 110.2°. Compared with the latex film of fluorine-free polyacrylate prepared under the similar polymerization condition, the fluorinated latex film had a better water-resistance and thermal stability.     

Syntheses and properties of novel non-ionic fluorinated multichains “star-like” surfactants

A series of star-like nonionic surfactants (with two hydrophobic and two hydrophilic chains) with different lengths of hydrophilic and hydrophobic arms were synthesised on the basis of pyromellitic acid dianhydride. The hydrophilic arms were formed by polyoxyethylene and hydrophobic ones either by perfluoro- or by alkyl chains. The adsorption monolayers (Gibbs monolayers) were studied by surface pressure (π) measurements as a function of time for different surfactant concentrations. For the spread monolayers (Langmuir monolayers), the measurements of the surface pressure (π) versus the molecular area (A) as well as the relaxation measurements of the area (A) as a function of time at constant surface pressure were performed. The comparison between the characteristic parameters of two types of monolayers was made in order to understand the effect of the preparation conditions on the structure of these monolayers.It was found that decreasing the fluoroalkyl chain length induced a systematical decrease in the stability of Langmuir monolayers, which is manifested as the Marangoni-Gibbs viscoelasticity of the monolayers. For the surfactants, which have a large number of oxyethylene groups, adsorption at the air/water interface from the bulk solution required extremely long times to reach equilibrium due to the diffusion from the solution and to the conformational rearrangements at the interface. The observation of a hysteresis in the compression/decompression curves for these compounds is explained by the presence of the residual organic solvent molecules absorbed by oxyethylenic chains. A novel model describing the kinetics of desorption or rearrangement of molecules during the lateral compression was suggested, allowing the estimation of both characteristic time of this process and areas per molecule at the equilibrium from the relaxation curves A(t).     

Effect of structure on properties of polyols and polyurethanes based on different vegetable oils

We synthesized six polyurethane networks from 4,4′‐diphenylmethane diisocyanate and polyols based on midoleic sunflower, canola, soybean, sunflower, corn, and linseed oils. The differences in network structures reflected differences in the composition of fatty acids and number of functional groups in vegetable oils and resulting polyols. The number average molecular weights of polyols were between 1120 and 1300 and the functionality varied from 3.0 for the midoleic sunflower polyol to 5.2 for the linseed polyol. The functionality of the other four polyols was around 3.5. Canola, corn, soybean, and sunflower oils gave polyurethane resins of similar crosslinking density and similar glass transitions and mechanical properties despite somewhat different distribution of fatty acids. Linseed oil–based polyurethane had higher crosslinking density and higher mechanical properties, whereas midoleic sunflower oil gave softer polyurethanes characterized by lower T_g and lower strength but higher elongation at break. It appears that the differences in properties of polyurethane networks resulted primarily from different crosslinking densities and less from the position of reactive sites in the fatty acids. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 809–819, 2004     

Syntheses and characterizations of soft‐segment ionic polyurethanes

Novel soft‐segment ionic polyurethane (linear and crosslinking) have been prepared based up on sodium sulfonate–side chains poly(ethylene oxide) (SPEO). SPEO was synthesized by grafting the sodium sulfonate onto the chain of poly(ethylene oxide) with molecular weights of 400, 600, 800, and 1000. The SPEO and the ionic polyurethane were characterized by elemental analysis, ¹H‐NMR, ¹³C‐NMR, gel permeation chromatography, and impedance analysis. The effect of plasticizer on the ionic conductivity of the polyurethane was also investigated. These solid polymer electrolytes possess a higher ionic conductivity (about 10⁻⁶ S/cm at room temperature) than the corresponding sulfonated hard‐segment polyurethane electrolytes. The presence of the hydroxyl group in the electrolyte tends to lower the ionic conductivity. Crosslinking of polyurethane results in the enhancement of the dimensional stability, while maintaining the same level of the ionic conductivity. © 1999 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 37: 837–845, 1999     

Antifoam effect of highly fluorinated polysiloxanes

Aqueous foaming solutions of permethylsiloxane surfactants and fluorocarbon surfactants are very resistant to antifoaming. Newly developed polysiloxane fluids having highly fluorinated chains showed very low surface tensions and were examined as antifoaming compounds to test against these two classes of surfactant systems. The fluorinated polysiloxanes evaluated were poly-[(3,3,4,4,5,5,6,6,6 - nonafluorohexyl)methylsiloxane] (PNFHMS), and 1H,1H,2H,2H-perfluorodecyl-terminated polydimethylsiloxane (Def-DMS). Poly(dimethylsiloxane) (PDMS) was also studied as a standard siloxane polymer fluid for comparison. The antifoams composed of PNFHMS and Def-DMS polymer fluids incorporated with silica showed effective antifoaming against the low surface tension aqueous solutions of representative permethylsiloxane and fluorocarbon surfactants.     

Study of phase separation in polyurethane using paramagnetic labels. Effect of soft segment molecular weight,structure, and thermal history

The morphology of segmented polyurethane (PU) elastomers was studied by means of ESR at various temperatures ranging from 100K-450K. The PU's were based on 4,4'-diphenylmethane diisocyanate (MDI), poly (oxytetramethylene) glycols (PTMO) and hydroxyl-terminated random compolymers of tetrahydrofuran and 3-methyl-tetrahydrofuran (THF/Me-THF). Purified 1,4-butanediol (BD) was used as a chain extender. The nitroxide probe, 4-hydroxy-2-2',6-6'-tetramethylpiperidine-1-oxyl (TEMPOL), was used to label the polyurethanes by reaction with an NCO group of MDI. Analysis of the electron spin resonance (ESR) spectra suggested that the label situates at heterogeneous sites, which means that a two-phase domain is present. The morphologies at 300K and 400K were compared. It was found from ESR spectra that polyurethanes made from soft segments having higher MW exhibited greater phase separation at 300K than their corresponding elastomers made from lower MW soft segments. However, at 400K the more isotropic ESR spectra for the PUs containing higher MW soft segments suggested that the PUs were more mobile than their analogs having lower MW soft segments. The introduction of 3-methyl side groups decreased the phase mixing at 400K due to steric hindrance.     

Convenient synthesis of novel fluorinated polyurethane hybrid latexes and core-shell structures via emulsion polymerization process with self-emulsification of polyurethane

Novel fluorinated polyurethane hybrid latexes in the size range of 40–50 nm, fluoroalkyl acrylate as fluorinated monomers, with various fluorine content (F% = 9∼26 wt%) were successfully prepared via emulsion polymerization process without traditional emulsifier. The waterborne polyurethane, which was synthesized by using isophronediisocyanate, dimethylol propionic acid, polyethylene glycols, etc., served not only as copolymerizable macromonomer but also as polymeric high molecular weight emulsifier. The structures of polyurethane macromonomer and fluorinated polyurethane were characterized by Fourier transform infrared and H¹-NMR. Particle size, zeta potential, micromorphology of the latex par.ticles, and surface properties were investigated by dynamic light scattering, potential particle size analyzer, transmission electron microscopy, and contact angle measurement, respectively. Results illustrated that the advantage of this process is that the size of fluorinated polyurethane hybrid particle is less sensitive to the composition. Furthermore, it was showed that fluorinated polyurethane latex particles had core-shell structures, especially when the content of fluorine was 26.08 wt%. Moreover, there was an obvious migration of fluorinated groups to the surface during the formation of fluorinated polymer films, although fluorinated groups were covered by polyurethane in latex particles.     

Synthesis and combined properties of novel fluorinated cationic surfactants derived from hexafluoropropylene dimer

Three novel fluorinated surfactants with branched short fluorinated tails as hydrophobic groups, ammonium oxide as polar groups are prepared. Surface tension measurement shows that these fluorinated surfactants are ideal compounds to design new formulations in fire-fighting field.