Adsorptive Catalytic Voltammetry of Physcion in the Presence of Dissolved Oxygen at a Carbon Paste Electrode

A novel electroanalytical method for the determination of physcion is described for the first time. Physcion yields an adsorption catalytic voltammetric peak at –0.74V (vs. SCE) in 0.4molL^–1 NH₄Cl–NH₃·H₂O buffer solution (pH 10.5) at a carbon paste electrode (CPE). The experimental results indicated that physcion is efficiently accumulated at a CPE by adsorption. In the subsequent potential scan, physcion was reduced to a homologous anthrahydroquinone compound. The compound was then immediately oxidized to physcion by the dissolved oxygen in the solution, and then physcion was again reduced at the CPE. As a result, a cyclic catalytic reaction was established. The second-order derivative peak current is proportional to the physcion concentration in the ranges of 2.0×10^–104.0×10^–9molL^–1 (accumulation 90s) and 4.0×10^–92.0×10^–8molL^–1 (accumulation 60s). The limit of detection is 8×10^–11molL^–1 (S/N=3) for a 120s accumulation time. The method was applied to the direct determination of physcion in the medicinal plant polygonum multiflorum Thumb with satisfactory results.     

Adsorptive Voltammetric Study of Thorium–Alizarin Complexon Complex at a Carbon Paste Electrode

A new sensitive adsorptive voltammetric procedure is described for trace measurement of thorium. It is based on the cathodic stripping peak of the thorium–alizarin complexon (ALC) complex at a carbon paste electrode (CPE). The complex of Th(IV) with alizarin is adsorbed at a CPE in a mixed buffer solution (pH 5.0) which consists of 0.1mol·L^–1 sodium acetate and 0.04mol·L^–1 potassium biphthalate, yielding a sensitive cathodic voltammetric peak corresponding to the reduction of alizarin in the complex at –0.57V (vs. SCE). The second-order derivative peak current of the complex is linearly dependent upon the concentration of Th(IV) over the range of 3.0×10^–9 8.0×10^–7mol·L^–1. The detection limit is 1.0×10^–9mol·L^–1 for 180s accumulation. The molar ratio of each component in the complex was estimated as n_Th(IV):n_ALC=1:1 by a continuous variation method. The electrode processes of the Th(IV)–alizarin complex at a CPE were investigated. The procedure was successfully applied to the trace determination of thorium in ore and clay samples.     

The Electrochemical Behavior of p-Aminophenol at a ω-Mercaptopropionic Acid Self-Assembled Gold Electrode

A -mercaptopropionic acid (MPA) self-assembled monolayer modified electrode (MPA/SAM/Au) on a gold electrode has been fabricated. The characterization of the MPA/SAM/Au was investigated using attenuated total reflection-fourier transform infrared (ATR-FTIR) and A.C. impedance. The electrochemical behaviors of p-aminophenol (p-AP) were studied at the MPA/SAM/Au by cyclic voltammetry and semi-derivative voltammetry (SDV) in BR buffer solution. The modified electrode shows excellent electrocatalytic activity for the redox of p-AP and accelerates the electron transfer rate. The diffusion coefficient (D) is 4.55×10^–6cm²s^–1. The oxidative peak current increases linearly with the concentration of p-AP in the range of 4.0×10^–88×10^–6molL^–1 and 1.0×10^–52×10^–4molL^–1 by square wave voltammetry response, respectively. The detection limit (three times the signal blank/slope) is up to 1.2×10^–8molL^–1. The modified electrode is able to eliminate the interference of p-benzenediol, o-benzenediol and o-AP at a 40-, 90- or 70-fold concentration of p-AP, and it has been satisfactorily used for the determination of the real sample.     

Polarographic Determination of Lovastatin in the Presence of H2O2 in Pharmaceuticals, Human Urine and Serum

The polarographic reduction and catalytic behavior of lovastatin are studied by polarography and cyclic voltammetry. The reduction wave of lovastatin appears at ca. –1.49V (vs. SCE) in 0.16molL^–1 Na₂B₄O₇–KH₂PO₄ (pH=7.4) supporting electrolyte containing 20% ethanol. It is ascribed to a 2e^–, 2H⁺ addition to the carbonyl group on lactone ring. If H₂O₂ is present, the reduction wave is catalyzed to produce a polarographic catalytic wave. Based on the catalytic wave, a novel method for the determination of lovastatin is proposed. A rectilinear calibration curve of the catalytic wave was obtained for lovastatin concentration in the range 1.5×10^–8 to 1.0×10^–6molL^–1. The peak current of the catalytic wave is ca. 12 times higher than that of the corresponding reduction wave. The detection limit is 8.0×10^–9molL^–1. The proposed method is simpler, faster and more sensitive than the known methods for lovastatin analysis, and can be applied to the direct determination of lovastatin in pharmaceuticals, urine and serum without preliminary separation.     

Electrocatalytic Properties and Voltammetric Determination of Melatonin at a Nanostructured Film Electrode

A multi-wall carbon nanotube (MWNT) film coated glassy carbon electrode (GCE) was fabricated, and the electrochemical behavior of melatonin on the MWNT film coated GCE was investigated. The oxidation peak current of melatonin increases significantly and the oxidation peak position shifts positively at the MWNT film modified GCE compared to that at a bare GCE. This indicates that MWNTs feature highly effective catalysis to the electrochemical oxidation of melatonin. A simple and sensitive electroanalytical method was developed for the determination of melatonin. The oxidation peak current is proportional to the concentration of melatonin from 8×10^–8 to 1×10^–5molL^–1. The detection limit is about 2×10^–8molL^–1 for 3min accumulation. The proposed method was demonstrated to work satisfactorily with commercial capsules.     

Nickel Ion-Selective PVC Membrane Electrode Based on a New t-Octyl-Calix[6]arene Derivative

This study presents a PVC membrane based on 5,11,17,23,29,35-Hexakis-t-octyl-37,38,39,40,41,42-hexakis(N-phenylthiocarbamoylmethoxy)calix[6]arene which is used as an electroactive substance. The electrode reveals a Nernstian response for Ni²⁺ over a wide pH range with a slope of linear portion (5×10^–6–1×10^–2M, R=0.988) of 29.75±0.2mV·decade^–1 at 25°C. The electrodes sensitivity is enhanced upon the introduction of sodium tetraphenylborate into the membrane as a negatively charged lipophilic additive. The selectivity coefficients of various interfering ions were determined using the fixed interference method (FIM). The membrane reveals good selectivity for nickel ions over the other metal ions investigated. The lifetime of this electrode is about one month. This electrode has been applied to the determination of nickel ions in wastewater from the electroplating industry.     

Molecular Imprinting-Chemiluminescence Determination of Norfloxacin Using a Norfloxacin-Imprinted Polymer as the Recognition Material

A selective molecular imprinting-chemiluminescence method was developed for the determination of norfloxacin by using a norfloxacin-imprinted polymer as recognition material and the Ce(IV)-sodium sulfite-norfloxacin chemiluminescence reaction as the detection system. The chemiluminescence intensity responded linearly to the concentration of norfloxacin within 1.0×10^–71.0×10^–5molL^–1 with a detection limit of 3×10^–8molL^–1. The relative standard deviation for 5.0×10^–7molL^–1 norfloxacin solution was 2.4% (n = 7). This method was applied to the determination of norfloxacin in urine samples, and the results obtained were satisfactory.     

Voltammetric Determination of Bismuth in Water and Nickel Metal Samples with a Sodium Montmorillonite (SWy-2) Modified Carbon Paste Electrode

A simple and reliable electrochemical method for the determination of bismuth in water and nickel metal samples using a sodium montmorillonite (SWy-2) modified carbon paste electrode was described. Due to its strong cation-exchange ability and adsorptive characteristics, SWy-2 significantly enhances the sensitivity of determination for Bi³⁺. Bi³⁺ is firstly preconcentrated and then reduced on the modified electrode surface at –0.50V. After that, reduced bismuth is stripped from the electrode surface during the positive potential sweep of –0.50V to 0.20V, and a well-defined stripping peak at –0.12V appears. The stripping peak current is proportional to the concentration of Bi³⁺ from 4×10^–9molL^–1 to 1×10^–6molL^–1. The detection limit (signal-to-noise=3) is 1×10^–10molL^–1 after 5min. accumulation. The proposed method was successfully applied to the determination of bismuth in water and nickel metal samples.     

Selective Kinetic Determination of Cu2+ with Tetraazamacrocyclic Bis(Methylphosphonate) Ligand (Dipon)

A new macrocyclic ligand, 1,4,8,11-tetraazacyclotetradecane-1,8-bis(methylphosphonic acid) (refered to as dipon) exhibits high thermodynamic and kinetic selectivity for Cu²⁺ compared to other transition metal ions. The initial-rate method (=310nm, pH=3.75, c_L4.6×10^–3molL^–1) was chosen as an optimal experimental approach in order to achieve maximum sensitivity of determination. The dynamic range of the method is (5–200)×10^–6molL^–1, and the detection limit is 2.5×10^–6molL^–1. A standard addition procedure was applied to the kinetic determination of Cu²⁺ to eliminate the effect of interfering ions (e.g. Zn²⁺, Ca²⁺, Mg²⁺, Cd²⁺, Pb²⁺, Mn²⁺, Co²⁺, Ni²⁺, HCO^–₃, Cl^–, SO₄^2–, etc.). The method was tested on artificial and real samples (alloys, pure and spiked mineral water) and gave satisfactory results which are in agreement with the values for some certified materials. The advantage of the proposed method is rapidity, simplicity and robustness in the presence of other metal ions.     

Kinetic Spectrophotometric Determination of Chromium (VI) by Oxidation of Sodium Pyrogallol-5-sulphonate by Hydrogen Peroxide

Summary. A new selective, sensitive, and simple kinetic method is developed for the determination of trace amounts of chromium (VI). The method is based on the catalytic effect of Cr(VI) on the reaction of sodium pyrogallol-5-sulphonate (PS) with hydrogen peroxide. The reaction is followed spectrophotometrically by tracing the oxidation product at 437nm within 1min after addition of H₂O₂. The optimum reaction conditions are PS (1.32·10^–3mol·dm^–3), H₂O₂ (0.32mol·dm^–3), HClO₄ (2.6·10^–3mol·dm^–3) at 25°C. Following this procedure, chromium (VI) can be determined with a linear calibration graph up to 0.25ng·cm^–3 and a detection limit of 0.024ng·cm^–3, based on the 3 criterion. The interference effect of several species was also investigated and it was found that the most common cations and anions do not interfere with the determination. The developed procedure was successfully applied to the determination of Cr(VI) and total Cr in river waters and total Cr in herbal samples.     

A Highly Sensitive and Selective Assay for Cysteine Using the Chemiluminescence Reaction of Luminol and Hydrogen Peroxide

A very simple, highly sensitive and selective chemiluminescence (CL) method was established for the determination of cysteine. This method is based on the fact that the CL reaction of luminol and hydrogen peroxide can be greatly enhanced by cysteine. The CL intensities at maximum light emission were linearly correlated with the concentration of cysteine over the range of 2.0×10^–8–6.0×10^–6molL^–1 with a detection limit of 7.5×10^–9molL^–1. The relative standard deviation was 1.7% for the determination of 1.0×10^–7molL^–1 cysteine (n=9). The feasibility of utilizing the proposed method for the determination of total concentration of cysteine in human serum was examined.     

Voltammetric Behavior of Dopamine at ct-DNA Modified Carbon Fiber Microelectrode

A sub-micrometer thin-layer DNA modified carbon fiber microcylinder electrode was prepared by electrodeposition of ct-DNA at 1.5V (vs. Ag/AgCl). The voltammetric behavior of dopamine (3-hydroxytyramine) was investigated at the modified electrode. It was found that the modified electrode exhibits a highly electrocatalytic activity toward dopamine oxidation. Differential pulse voltammetry was used for determination of dopamine in pH 7.4 phosphate buffer solution. A linear response of the peak current versus the concentration was found in the range of 4×10^–6 to 10^–4molL^–1 at 10^–4molL^–1 AA (ascorbic acid) coexistence (R=0.9959) and the range of 6×10^–5 to 10^–3molL^–1 at 10^–3molL^–1 AA (R=0.9960). The presence of a high concentration of ascorbic acid did not interfere with the determination. The proposed method exhibited good recovery and reproducibility. This method can be applied to the detection of DA in real samples.     

On the Applicability of Duolite GT-73 to Column Preconcentration of Gold and Palladium Prior to Determination by Inductively Coupled Plasma Atomic Emission Spectrometry

The preconcentration of Au and Pd on Duolite GT-73 chelating resin with the thiol functional group was investigated prior to determination of these noble metals by means of inductively coupled plasma atomic emission spectrometry. It was found that Au^III and Pd^II were retained on the resin along with other concomitant metals (Al, Ca, Cd, Co, Cr, Cu, Fe, Mg, Mn, Ni, Pb and Zn) from different HCl-containing media. A two-step elution procedure was developed for the release of the noble metals. First 4.0molL^–1 HNO₃ solution was used to elute the base metals. The recovery of Au and Pd was performed afterwards using 0.50molL^–1 solution of (NH₂)₂CS. Retrieval of Au and Pd retained on Duolite GT-73 was also carried out by decomposition of the resin in the open vessel system using H₂SO₄ with H₂O₂. The detection limits of Au and Pd evaluated for the devised protocol, with a preconcentration factor of 50, were 0.085µgL^–1 and 0.28µgL^–1, respectively. The proposed method was applied to the determination of Au and Pd in spiked electrolytic bath samples.     

Immobilization of Urease and Cholinesterase on the Surface of Semiconductor Transducer for the Development of Light-Addressable Potentiometric Sensors

Various methods for the immobilization of urease and butyrylcholinesterase on the insulator surface of a laser-scanned semiconductor transducer (LSST) have been tested and compared for the development of an enzyme-based light-addressable potentiometric sensor (LAPS). The method of preparing photocurable membranes on LAPS is presented, and a new type of enzyme LAPS with photocurable polymeric enzyme membranes has been elaborated. It was found that sensors prepared by means of covalent bonding and cross-linking with inactive protein (type SIII) and with photocurable membrane matrices (type SIV) are more prospective. The enzyme LAPSensors with photocurable membranes demonstrate a degree of sensitivity close to the theoretical value and working ranges of 6.3·10^–5–1.1·10^–2 and 1·10^–4–1·10^–1molL^–1 urea for acrylamide and acrylate-based membrane matrices, respectively, and 2.5·10^–4–2·10^–1molL^–1 butyrylcholine for an acrylamide membrane matrix. It is shown that such sensors can be also used for the analysis of enzyme inhibitors.     

Determination of Na,K, Rb and Cs Distribution in Human Brain Using Neutron Activation Analysis

This study aims to investigate the distribution of Na, K, Rb and Cs in human brains (5 individuals, 12 brain parts, mean age: 75 years). Distribution of the trace metals between lipid fraction and brain tissue was investigated in solvent extraction experiments. Determinations were carried out by instrumental neutron activation analysis. The present results show a rather non-homogeneous distribution for Na and a relatively uniform distribution for K, Rb and Cs. The mean concentrations found are 7440µgNag^–1 dry weight, 12800µgKg^–1, 14µgRbg^–1 and 50ngCsg^–1. A highly significant positive correlation was found between Rb and Cs. Solvent extraction experiments showed that 19% of Rb and 26% of Cs of the total content is located in lipid fraction.     

Energy Transfer Electrogenerated Chemiluminescence for the Determination of Sulfite

A simple and novel electrogenerated chemiluminescence (ECL) method for the determination of sulfite has been developed based on the energy transfer ECL process. It was found that a weak ECL signal of sulfite was electrochemically generated on a platinum electrode in neutral aqueous solution. The signal was strongly enhanced by rhodamine B as an energy receptor and further enhanced by the neutral surfactant Tween 80. In 0.10M phosphate buffer solution (pH=7.5) containing 2.0×10^–6gmL^–1 rhodamine B and 0.4% (v/v) Tween 80, the ECL response to the concentration of sulfite at a potential of 0.82V was linear over a range of 1.0×10^–7gmL^–1 to 8.0×10^–6gmL^–1, and the detection limit was 5×10^–8gmL^–1. The relative standard deviation (n=11, 1.0×10^–6gmL^–1) was 3.8%. The proposed method has been successfully applied to the determination of sulfite in pharmaceutical injections and white sugar samples.     

Electrochemical Behavior of Epinephrine at a Penicillamine Self-Assembled Gold Electrode,and its Analytical Application

The fabrication and electrochemical characteristics of a penicillamine (PCA) self-assembled monolayer modified gold electrode were investigated. The self-assembled electrode shows obvious electrocatalytic activity for the oxidation of epinephrine (EP). In phosphate buffer (pH 7.73), a sensitive oxidation peak was observed at 0.190V with the PCA modified Au electrode. The peak current is proportional to the concentration of EP in the range of 2.0×10^–56.0×10^–4molL^–1 and 5.0×10^–6 2.0×10^–4molL^–1 for cyclic voltammetry (CV) and differential pulse voltammetry (DPV) with the detection limits of 1.8×10^–7 and 1.3×10^–7molL^–1, respectively. The possible reaction mechanism is also discussed. The PCA self-assembled monolayer modified gold electrode is highly stable and can be applied to the determination of EP in practical injection samples. Application is simple, rapid and produces accurate results.     

Electrochemical Determination of Cinnamtannin B1 with a Pyrolytic Graphite Electrode

Cinnamtannin B1 (trimeric proanthocyanidin), which is identified and isolated from the effective fraction of the root of Lindera aggregata (Sims) Kosterm, is one kind of condensed tannin used as an effective antipyrotic and antitumor agent. Its electrochemical response can be obtained at a pyrolytic graphite electrode. Consequently, an easily performed and sensitive method for the determination of cinnamtannin B1 is developed. The detection limit is estimated to be 1.0×10^–7M with the linear determination range of 2.0×10^–7M to 1.8×10^–6M. Five replicate analyses of 1.0×10^–6M cinnamtannin B1 yields an RSD value of 2.1%. Since the working electrode does not need to be modified with any other species, it is very stable, repeatable and easily treated, and this method therefore potentially useful in real sample analysis.     

Fluorimetric Flow-Through Sensing of Quinine and Quinidine

We describe a single continuous-flow method for the determination of Quinine (QN) and Quinidine (QD) based on the enhancement of their native fluorescence by on-line transitory retention on a solid support placed in a flow cell. KCl solution was used as carrier/self-eluting solution. The active solid surface is regenerated by the carrier itself which also acts as eluting solution, thus making the microsensing zone reusable for subsequent measurements.In the range of 40 to 1260µL, the response of the sensor (_exc/_em=250/450nm) was directly proportional to the sample volume injected. The sensor was calibrated for three injection volumes: 40, 600 and 1000µL, responding linearly in the range of 40–800, 2–40 and 0.4–20µgL^–1 of QN and 20–600, 5–40 and 0.9–20µgL^–1 of QD with detection limits of 2.2, 0.2 and 0.1µgL^–1 (QN) and 3.9, 0.4 and 0.2µgL^–1 (QD), respectively. The relative standard deviation for ten independent determinations is 1.0% (QN) and 3.9% (QD). The sampling frequency ranges between 40 and 22h^–1 depending on the sample volume injected. This sensor was satisfactorily applied to the determination of QN in soft drink samples and a shampoo, and to the determination of QD in pharmaceutical preparations with equally satisfactory results.     

Determination of Iron in Tap and Waste Water Using Liquid–Liquid Extraction in a Flow-Injection System

A flow-injection procedure for the determination of iron(III) in water is described. The procedure is based on the formation of an ion pair between the tetraphenylarsonium (Ph₄As⁺) (TPA) or tetrabutylammonium (But₄N⁺) (TBA) cations and the tetrathiocyanatoferrate(III) complex (TTF). This ion pair is extracted with chloroform, and the absorbance of the organic phase is measured at 503nm (for Ph₄As⁺) or 475nm (for But₄N⁺). Iron concentrations higher than 0.9×10^–6molL^–1 (50µgL^–1) can be detected in the first case, with a relative standard deviation of 1.9% (n=12), a linear application rangeof between 1.34 and 54.0×10^–6molL^–1 (75–3015µgL^–1), and a sampling frequency of 30h^–1. For the ion pair with But₄N⁺, the detection limit is 0.52×10^–6molL^–1 (29µgL^–1), with a relative standard deviation of 1.6% and a linear application range between 0.73 and 54.0×10^–6molL^–1. Under the proposed working conditions, only Pd(IV), Cu(II) and Bi(III) interfere. With the application of the merging zones technique, considerable amounts of organic reagent can be saved. The TBA method was applied to the analysis of iron(III) in tap and industrial waste waters.