An ab initio study of CO adsorption on ceria(1 1 0)

Hartree–Fock and DFT calculations are reported for the CO/CeO₂(1 1 0) surface system. The electron density, electrostatic potential, atomic charges and projected electronic density of states have been calculated from an ECP-and-point-charge-embedded cluster model and is compared with periodic calculations. The agreement between the two surface models is reasonably good. A number of weakly bonding CO adsorption sites were found, with E_ads (BSSE-corrected) ranging from 0.01 to 0.22 eV per adsorbed molecule. The two most favourable sites are found in the vicinity of surface cerium ions, with the CO molecule oriented in a tilted fashion, C-end down. The surface-induced CO stretching vibrational frequency shifts on these sites are a redshift of ≈−30 cm⁻¹ and a blueshift of ≈25 cm⁻¹, respectively.     

First-principles study of hydrogen adsorption on Mo(1 1 0)

First-principles calculations based on density functional theory-generalized gradient approximation method have been performed for hydrogen (H) adsorption on Mo(1 1 0) surface. For various coverages, the hollow (hol) site was found to be the most stable binding site. The adsorption energy of this site was slightly increased as the increasing of hydrogen coverage. Subsurface (sub) occupation at low and medium coverages was ruled out while it became to be stable at the coverage of 1 ML. This is also supported by the potential energy surface (PES) study for hydrogen diffusing from hol to sub site. It’s interesting to find a surface reconstruction at the coverage of 1 ML, which is characterized by the lateral shift of the topmost layer for the sub adsorption. At higher coverage, the local density of states (LDOS) analysis showed that a new peak was clearly visible which was ascribed to a surface state induced by hydrogen adsorption. This surface state was mostly localized on the hydrogen atom and the first Mo layer, implying the hybridization of the hydrogen 1s states and the Mo metal states.     

Morphology and optical properties of MgO thin films on Mo(0 0 1)

The photophysical properties of N-(1-naphthyl)-carbazole (1-NACZ), N-(2-naphthyl)-carbazole (2-NACZ), N-(1-naphthyl)-benzimidazole (1-NABI) and N-(2-naphthyl)-benzimidazole (2-NABI) were studied. The emission wavelengths of 1-NACZ and 2-NACZ were very sensitive to the polarity of solvents. The magnitude of change in the dipole moment was calculated based on the Lippert–Mataga equation. 1-NACZ and 2-NACZ had higher change in the dipole moment than that of 1-NABI and 2-NABI . The optical properties, including fluorescence quantum yield and fluorescence decay times, were determined in different polarity solvents. These gave the evidence about the intramolecular charge transfer character in the excited singlet state of 1-NACZ and 2-NACZ.     

A possible approach towards spin-polarized transport through single molecule magnets: Mn12 on Au(1 0 0)/Fe(1 0 0)/MgO(1 0 0)

The possibility to use the Au(1 0 0)/Fe(1 0 0)/MgO(1 0 0) system as a substrate for future spin-polarized transport measurements on Mn₁₂ single molecule magnets has been investigated by means of scanning tunneling microscopy and X-ray photoelectron spectroscopy at room temperature. In particular, the stability of the iron layer during a wet chemical preparation of Mn₁₂ monolayers was studied. The results demonstrate that Mn₁₂ can be deposited on Au(1 0 0)/Fe(1 0 0)/MgO(1 0 0) while preserving the metallic nature of the ferromagnetic iron layer which is required as a possible source of spin-polarized electrons in future studies.     

Adsorption of the first row of transition metals on the perfect and defective MgO(1 0 0) surface

We present DFT calculations for adsorption of the first row of transition metal atoms on a MgO(1 0 0) surface and on a surface exhibiting defects. Some atoms exhibit a high adsorption energy on the defect (e.g. Co, Ni and Cu), but others (Ca, Sc) rather adsorb on a clean surface and another set is indifferent to the presence of defect. The adsorption becomes energetically unfavorable when the σ anti-bonding orbitals become populated; this is worse on a defective surface than on a terrace. The π back-donation to the surface contributes to favor the adsorption on the center.     

Desorption related to adsorption of hydrogen via detailed balance on the Si(1 0 0) surfaces

Recent progress on desorption and adsorption dynamics of hydrogen (deuterium) on monohydride and dihydride Si(1 0 0) surfaces is reviewed and discussed. The dynamics experiments reveal that the desorption dynamics of hydrogen is well related to the adsorption dynamics via detailed balance. Dependence of time-of-flight (TOF) distributions of desorbed molecules on H(D) coverage is noticed to be important in understanding the kinetics mechanism of the adsorption/desorption reactions of hydrogen on the Si(1 0 0) surface. The desorption dynamics varies from the situation of strongly translational heating to the other situation of less translational heating with D coverage. This trend seems to be consistent with the 2H/3H/4H interdimer mechanism. However, despites by far the richest 4H configuration at high H coverage, the 2H desorption prevails over the 4H desorption already at 0.8 ML. To reconcile this unexpected desorption kinetics, a diffusion-promoted desorption mechanism is proposed. Height of the adsorption barriers for the 2H and 3H pathways could be reduced by the H-atom diffusion along the Si dimer rows, but that for the 4H pathway could not be the case because of no capability of diffusion on the H saturated surface. The desorption dynamics of hydrogen from the (3 × 1) dihydride surface is also reviewed and compared with the case on the monohydride surface. The sticking coefficients of hydrogen molecules onto the monohydride surfaces are evaluated from the TOF curves and found to be strongly activated by the kinetic energy. Not only the degrees of freedom of the molecules but also the vibrational degrees of freedom of substrate Si atoms determine the barrier height for adsorption. The desorption dynamics of hydrogen from the monohydride and dihydride surfaces appears to be quite similar, but the dynamics of substrate Si atoms is expected to be quite dissimilar between the two desorption pathways.     

Li atoms deposited on single crystalline MgO(0 0 1) surface. A combined experimental and theoretical study

In this Letter the interaction of Li atoms with terrace sites of MgO(0 0 1) surfaces is characterized by combining EPR spectroscopy with theoretical calculations. The Li atoms adsorbed to MgO terrace sites show a reduction of the isotropic hyperfine coupling constant by approximately 50% with respect to Li atoms in the gas phase. In combination with theoretical calculations it can be shown that this reduction of the hyperfine coupling constant is not due to a charge transfer between Li and MgO but can be understood by a polarization of the Li atoms which are essentially neutral.     

Transition metals on the (0 0 0 1) surface of graphite: Fundamental aspects of adsorption,diffusion, and morphology

In this article, we review basic information about the interaction of transition metal atoms with the (0 0 0 1) surface of graphite, especially fundamental phenomena related to growth. Those phenomena involve adatom-surface bonding, diffusion, morphology of metal clusters, interactions with steps and sputter-induced defects, condensation, and desorption. General traits emerge which have not been summarized previously. Some of these features are rather surprising when compared with metal-on-metal adsorption and growth. Opportunities for future work are pointed out.     

Influence of subsurface,charged impurities on the adsorption of chlorine at TiO2(1 1 0)

Adsorption of chlorine on TiO₂(1 1 0) surfaces modified by subsurface impurity atoms was studied by scanning tunneling microscopy. Adsorption was found to be suppressed in the vicinity of positively charged subsurface donor atoms. The reduced adsorption is explained by an increased electron affinity close to the impurity atoms that renders these sites energetically unfavorable for acceptor-like adsorbates.     

Adsorption of hydrogen on Pt(1 1 1) and Pt(1 0 0) surfaces and its role in the HOR

Hydrogen adsorption isotherms, evaluated by combination of cyclic voltammetry and chronoamperometry, are reported on Pt(1 1 1) and Pt(1 0 0) surfaces in 0.1 M HClO₄. We found that at E > 0.05 V Pt(1 1 1) and Pt(1 0 0) are only partially covered by the adsorbed hydrogen (H_ad). On both surfaces, a full monolayer of the adsorbed hydrogen is completed at −0.1 V, i.e. the adsorption of atomic hydrogen is observed in the hydrogen evolution potential region. We also found, that the activity of the hydrogen oxidation reaction is mirrored by the shape of the hydrogen adsorption isotherms, implying that H_ad is in fact a spectator in the HOR.     

Adsorption of alkali metals on Ge(0 0 1)(2 × 1) surface

Ab initio total energy calculations have been performed for Na, K and Rb adsorption on Ge(0 0 1)(2 × 1) surface. It was found that the adsorption site of AM is AM size dependent. Structural analysis showed that the Ge–Ge dimer bond becomes stronger with increasing AM size. As the coverage increases from 0.5 to 1 ML it turns out that no depolarization effect occurs upon Na adsorption, while this effect becomes more important with increasing AM size. We also found that for all adsorption systems investigated the germanium surface is metallic and semiconducting for the coverage of 0.5 and 1 ML, respectively.     

Interface geometry of Ag thin films supported at the MgO(1 0 0) surface: an ab-initio periodic study

In this Letter, the interface geometry of silver thin films of thickness T between 1 and 3 ML epitaxially deposited at the MgO surface has been accurately characterized employing DFT periodic calculations. The Ag–Ag out-of-plane interlayer spacing is considerably shorter than the bulk values because of: (i) the reduced dimension; (ii) the perfect epitaxy constraint; (iii) the interaction with the substrate. The interface distance between the silver monolayer and the MgO substrate, d(Ag–O) = 2.60 Å, is considerably longer than the estimates computed for the bilayer and the trilayer, d(Ag–O) = 2.47 and 2.48 Å, respectively. The difference between the values of the interface distance computed for the monolayer and the results obtained for thicker films, lies in the peculiar electronic properties of the silver monolayer.     

Angle-resolved soft X-ray magnetic circular dichroism in a monatomic Fe layer facing an MgO(0 0 1) tunnel barrier

The electronic and magnetic states of a monatomic Fe(0 0 1) layer directly facing an MgO(0 0 1) tunnel barrier were studied by angle-resolved X-ray magnetic circular dichroism (XMCD) at the Fe L_2,3 edges in the longitudinal (L) and transverse (T) arrangements. A strong XMCD reveals no oxidation of the 1-ML Fe, showing its crucial role in giant tunnel magnetoresistance effects in Fe/MgO/Fe magnetic tunnel junctions. Sum-rule analyses of the angle-resolved XMCD give values of a spin moment, in-plane and out-of-plane orbital and magnetic dipole moments. Argument is given on their physical implication.     

Formation of Pd dimers at regular and defect sites of the MgO(1 0 0) surface: cluster model calculations

The formation of Pd dimers on the surface of MgO has been studied by means of density functional theory (DFT) cluster model calculations. The following surface sites have been considered: regular five-coordinated anions at the (1 0 0) terraces, monoatomic steps, OH groups, and neutral vacancies (F centers). We discuss the energy balance of forming a dimer at a given site with respect to two isolated Pd atoms, one adsorbed at the defect and one on a regular terrace site. We found that all the defects considered lead to an energy gain when the dimer is formed, suggesting that they can be involved in nucleation and growth processes of metal clusters on the MgO surface. The dimerization energy is moderate for steps (≈0.8 eV), large for OH groups (≈1.3 eV) and rather small (<0.5 eV) for F centers.     

CO adsorption on Ag(100) and Ag/MgO(100)

Theoretical studies of CO adsorption on a two-layer Ag(100) film and on a two-layer Ag film on a MgO(100) support are reported. Ab initio calculations are carried at the configuration interaction level of theory using embedding methods to treat the metal-adsorbate region and the extended ionic solid. The metal overlayer is considered in two different structures: where Ag-Ag distances are equal to the value in the bulk solid, and for a slightly expanded lattice in which the Ag-Ag distances are equal to the O-O distance on the MgO(100) surface. The calculated adsorption energy of Ag(100) on MgO(100) is 0.58 eV per Ag interfacial atom; the Ag-O distance is 2.28 A. A small transfer of electrons from MgO to Ag occurs on deposition of the silver overlayer. CO adsorption at an atop Ag site is found to be the most stable for adsorption on the two-layer Ag film and also for adsorption on Ag deposited on the oxide; CO adsorption energies range from 0.12 to 0.19 eV. The CO adsorption energy is reduced for the Ag/MgO system compared to adsorption on the unsupported metal film thereby providing evidence for a direct electronic effect of the oxide support at the metal overlayer surface. Expansion of the Ag-Ag distance in the two-layer system also reduces the adsorption energy.     

Addition reactions of nitrones on the reconstructed C(1 0 0)-2 × 1 surfaces

In this paper, the reactions of nitrone, N-methyl nitrone, N-phenyl nitrone and their hydroxylamine tautomers (vinyl-hydroxylamine, N-methyl-vinyl-hydroxylamine and N-phenyl-vinyl-hydroxylamine) on the reconstructed C(1 0 0)-2 × 1 surface have been investigated using hybrid density functional theory (B3LYP), Møller–Plesset second-order perturbation (MP2) and multi-configuration complete-active-space self-consistent-field (CASSCF) methods. The calculations showed that all the nitrones can react with the surface “dimer” via facile 1,3-dipolar cycloaddition with small activation barriers (less than 12.0 kJ/mol at B3LYP/6-31g(d) level). The [2+2] cycloaddition of hydroxylamine tautomers on the C(1 0 0) surface follows a diradical mechanism. Hydroxylamine tautomers first form diradical intermediates with the reconstructed C(1 0 0)-2 × 1 surface by overcoming a large activation barrier of 50–60 kJ/mol (B3LYP), then generate [2+2] cycloaddition products via diradical transition states with negligible activation barriers. The surface reactions result in hydroxyl or amino-terminated diamond surfaces, which offers new opportunity for further modifications.     

Electrochemical deposition of PbTe onto n-Si(1 0 0) wafers

Electrochemical deposition of PbTe from 50 mM Pb(NO₃)₂ + 1 mM TeO₂ + 0.1 M HNO₃ solution onto n-Si(1 0 0) wafers was studied using cyclic voltammetry (CV), chronoamperometry, ex situ SEM, XRD and EDX. Electrochemical behavior of n-Si(1 0 0) electrode in electrolytes 50 mM Pb(NO₃)₂ + 0.1 M HNO₃ and 1 mM TeO₂ + 0.1 M HNO₃ was also studied. No underpotential deposition (UPD) of Pb and Te onto n-Si was observed in the investigated systems indicating weak Pb–Si and Te–Si interactions. Deposition of Pb and Te on n-Si occurred with overvoltage via 3D island growth. Electrosynthesis of PbTe (NaCl-like structure, a = 0.650 nm) takes place due to codeposition of Pb and Te at potentials E > E_{Pb²⁺/Pb⁰} (lead UPD onto tellurium). Cathodic deposition of PbTe onto n-Si(1 0 0) is irreversible – there is no anodic current in the CV curve. Oxidation of PbTe on n-Si is observed only under illumination, when photoelectrons and photoholes are generated in silicon substrate.     

New understanding of the nature of OH adsorption on Pt(1 1 1) electrodes

The adsorption of hydroxyl on Pt(1 1 1) single crystal electrodes from aqueous acidic solutions is carefully reinvestigated. The effect of small additions (10⁻⁸–10⁻⁵ M) of chloride and bisulphate anions on the OH adsorption region in perchloric acid solution has been studied. Two regions can be differentiated in the voltammetric profile, that behave differently after the addition of the foreign anion. The initial broad adsorption process is unaffected until the highest concentration is attained. However, the sharper peak at higher potentials is affected even at the lower anion concentration. Since mass transport limitations allow to discard the anion adsorption as the main process giving this peak, we propose that the two processes are due to the dissociative adsorption of two different kinds of water, that are affected by the anion in a different way. From this idea, a new model, based on the Frumkin adsorption isotherm, is proposed, which gives an excellent fit of the experimental results.     

Synthesis and characterization of preferentially oriented (1 0 0) Pt nanowires

Two types of platinum deposits were obtained by potentiostatic deposition onto Ti substrates, namely platinum black (Pt B) and platinum nanowires (Pt NW) with the latter being achieved through a porous anodic aluminum oxide (AAO) membrane at the solution/substrate interface. Surface characterization of these deposits was performed using scanning electron microscopy (SEM) and cyclic voltammetry (CV) in sulphuric acid solution. Surface properties for Pt NW revealed a predominant presence of (1 0 0) crystallographic planes, not present in Pt B deposit grown in the same conditions. Also, Pt NW exhibits an increased resistance to electrochemically active surface area (EASA) loss upon potential cycling in acidic solution, as compared to Pt B.