Cyclodipeptide-bridged porphyrin dimer supramolecular assemblies

A cyclodipeptide-bridged porphyrin dimer has formed fibrous and toroidal multi-porphyrin array systems by hydrogen bonding-mediated self-assembly.     

Influence of supramolecular organization on energy transfer properties in chiral oligo(p-phenylene vinylene) porphyrin assemblies

A comparative study on oligo(p-phenylene vinylene) (OPV)-appended porphyrins containing all trans-vinylene (either hydrophilic or lipophilic) or amide linkages (lipophilic) is presented. The type of supramolecular arrangement obtained in organic solvents proves to be strongly dependent on the nature of the covalent connection. In the case of all trans-vinylene linkages, a J-type intermolecular packing is obtained and the assemblies are only of moderate stability. Conversely, the supramolecular structures obtained from the amide-linked system display an H-type stacking arrangement of enhanced stability and chirality as a consequence of intermolecular hydrogen bonding along the stack direction, favorably interlocking the stacked building blocks. Interestingly, the observed differences in stability and organization are qualitatively illustrated by monitoring the sequential energy transfer process in both types of assemblies. Efficient intramolecular energy transfer from the OPVs (donors) to the respective porphyrin cores is followed by energy transfer from Zn-porphyrin (donor) to free-base porphyrin (acceptor) in both systems. However, the improved intermolecular organization for the amide-linked system increases the energy transfer efficiency along the stack direction. In addition, the water-soluble (OPV)-appended porphyrin system forms highly stable assemblies in an aqueous environment. Nevertheless, the poor energy transfer efficiency along the stack direction reveals a relative lack of organization in these assemblies.     

Tuning porphyrin/DNA supramolecular assemblies by competitive binding

Addition of an intercalating but nonaggregating porphyrin, AuT4, to a preformed adduct between DNA and a strongly aggregating porphyrin, t-H2Pagg, permits control of the extent of aggregation of the latter. The size and the intensity of the ICD and RLS signals depend linearly on the concentration of the intercalating dye and decrease markedly on increasing the concentration of the available binding sites on the biopolymer template.     

Template-assisted control of porphyrin aggregation by ladder-type supramolecular assemblies

A new strategy to control the orientation and aggregation numbers of porphyrins by alignment along well-defined templates has been demonstrated. Porphyrin-bridged bisPYBOX ligands were arranged along the oligomeric secondary dialkylammonium cations as templates to form well-defined supramolecular complexes. The templates controlled the aggregations of the porphyrins.     

Handedness inversion of chiral amphiphilic molecular assemblies evidenced by supramolecular chiral imprinting in mesoporous silica assemblies

Antipodal twisted helical ribbons with lamellar bilayer structure were obtained by self-assembly of chiral amphiphilic molecules in water and water/ethanol. The handedness inversion of the molecular arrangement in these antipodal helical ribbons was investigated by using chiroptical spectroscopy and molecular probes in their antipodal mesoporous silica assemblies synthesized through pairing interaction between the head group of the chiral amphiphilic molecules and a co-structure-directing agent. The supramolecular chirality is imprinted in the pore surface through the organic group of the co-structure-directing agent. The mirror-image diffuse-reflectance circular dichroism spectra of the conjugated discotic probing molecule introduced into their supramolecular chiral imprinted mesoporous silica demonstrated the origin of inverse chirality from the antipodal helical stacking of the molecules.     

Rational design of supramolecular chirality in porphyrin assemblies: the halogen bond case

Asymmetric functionalization of the tetraarylporphyrin scaffold, combined with directional supramolecular halogen bonding, yields chiral architectures.     

Chiral memory via chiral amplification and selective depolymerization of porphyrin aggregates

Chiral memory at the supramolecular level is obtained via a new approach using chiral Zn porphrins and achiral Cu porphyrins. In a "sergeant-and-soldiers" experiment, the Zn "sergeant" transfers its own chirality to Cu "soldiers" and, after chiral amplification, the "sergeant" is removed from the coaggregates by axial ligation with a Lewis base. After this extraction, the preferred helicity observed for the aggregates containing achiral Cu porphyrins reveals a chiral memory effect that is stable and can be erased and partially restored upon subsequent heating and cooling.     

Catalytic carbene insertion into an aminoporphyrin and formation of a new chiral supramolecular porphyrin system

The catalytic insertion of ethyl diazoacetate into a porphyrin derivative bearing an NH₂ substituent, in the presence of a Rh-based catalyst, was investigated. The X-ray analysis of one of the isolated products reveals the formation of a chiral supramolecular system.     

Multiple photosynthetic reaction centres composed of supramolecular assemblies of zinc porphyrin dendrimers with a fullerene acceptor

Multiple photosynthetic reaction centres have successfully been constructed using supramolecular complexes of zinc porphyrin dendrimers [D(ZnP)(n): n = 4, 8, 16] with fulleropyrrolidine bearing a pyridine ligand (C(60)py). Efficient energy migration occurs completely between the ZnP units of dendrimers prior to the electron transfer with increasing the generation of dendrimers to attain an extremely long charge-separation lifetime.     

Addressing metal centres in supramolecular assemblies

Supramolecular metal ion assemblies are deposited from their solutions onto highly orientated pyrolytic graphite (HOPG) substrates to be imaged by scanning tunnelling microscopy (STM). Since the structural and electronic information of STM measurements are strongly entangled, the spectroscopic interpretation and analysis of the images of such molecular assemblies has proven to be challenging. This tutorial review focuses on a general room temperature scanning tunnelling spectroscopy (STS) protocol, current induced tunnelling spectroscopy (CITS), applied to free-standing 1D and 2D arrangements of supramolecular metal ion assemblies rendering local tunnelling probabilities with submolecular resolution. The size of the investigated molecular assemblies was confirmed by comparison with X-ray crystallographic data, while the consistency of the spectroscopic investigations and of the determined positions of the metal ions within the assemblies was checked by DFT calculations. Due to the genuine level structure of coordinated metal centers, it was possible to map exclusively the position of the coordination bonds in supramolecular transition metal assemblies with submolecular spatial resolution using the CITS technique. CITS might thus constitute an important tool to achieve directed bottom-up construction and controlled manipulation of fully electronically functional, two-dimensional molecular designs.     

Supramolecular assemblies between macrocyclic porphyrin hexamers and star-shaped porphyrin arrays.

The syntheses of eight new star-shaped D(3)-symmetric arrays in which three 15-(pyrid-4-yl)porphyrin subunits are attached to the 1, 3, and 5 positions of a benzene core through linkers consisting of collinear repetitive phenylethynyl units have been carried out using Pd(0)-catalyzed coupling reactions. By the same procedure, an analogous 10-(4-pyridin-yl)porphyrin hexamer in which all positions of the benzene core are substituted has been obtained. Likewise, the preparation of suitably sized cyclic porphyrin hexamers, in which all six or at least three alternate porphyrin rings are complexed with Zn(II) ions, is described in detail. In solution, such cyclic porphyrin hexamers form supramolecular assemblies with the star-shaped polyporphyrins in which the latter are held in the interior of the macrocycle through coordination of the apical pyridine rings with the Zn(II) ions. The suggested structures are supported by (1)H NMR spectroscopic and MALDI-TOF mass spectrometric measurements. They agree with the high values of the binding constants of the corresponding supramolecules, which range between K = 1.1 x 10(10) and 1.4 x10(9) M(-1).     

Polymeric porphyrin and metalloporphyrin assemblies in bulk solution

Some water-soluble porphyrins aggregate in aqueous media to form fibrous assemblies. When polynucleotides are used as matrices, porphyrin monomers are aligned at the periphery or intercalated. Porphyrin-porphyrin interactions hardly occur. Metal-metal or metal-ligand-metal interactions have been observed in oxo-oligomers, pyrazine-bridged dimers and radical dimers. β-Substituted metallo-porphyrins, however, form no polymers. The only linear polymerization, which has so far been observed in molecular asemblies, occurs with amphiphilic porphyrin amides, amines and carboxylates and their metal complexes in water and of bacteriochlorophyll in DMF/water. These compounds form long-lived high molecular weight micellar, inverse micellar and vesicular fibers spontaneously in aqueous media. The porphyrin fibers in water are about 4-6 nm thick and up to several of μm long.     

Synthesis of new porphyrin/fullerene supramolecular assemblies: a spectroscopic and electrochemical investigation of their coordination equilibrium in solution

Two new fullerene ligands have been designed to provide relatively simple frameworks to build supramolecular systems containing both fullerene and Zn-porphyrin moieties. The coordination of the fullerene ligands to the Zn-porphyrin was supported by UV-vis titration, nuclear magnetic resonance and electrochemical data. The resulting spectrophotometric data were processed both graphically and computationally to yield the stoichiometry, stability constant, and molar absorptivity of the species in equilibrium.     

Controllable macrocyclic supramolecular assemblies in aqueous solution

A series of macrocycles, including crown ethers, cyclodextrins, calixarenes, pillararenes and cucurbiturils, are well known to be able to associate various organic/inorganic/biological guest molecules and ions in their well-defined cyclic cavities to form stable host-guest complexes and supramolecular systems through the cooperative contributions of various non-covalent interactions. When one or more functional groups are attached to the cavity of macrocycles or guest molecules, enhanced and/or controlled host-guest associations may take place, leading to not only improved host-guest binding abilities but also fascinating properties. In this review, some representative contributions in the construction of controllable macrocyclic supramolecular assemblies in aqueous solution are presented with an emphasis on the stimuli-responsive control manner and wide applications of this property.     

Directional exciton transport in supramolecular nanostructured assemblies

Supramolecular nanostructured host-guest compounds provide an intriguing strategy for improved materials in optoelectronic devices. Here, conjugated organic guest molecules are embedded in channel-forming organic or inorganic hosts, like perhydrotriphenylene (PHTP) and zeolites, leading to weakly coupled, highly ordered, and brightly emissive materials. In-depth material characterization allows for a full understanding of the exciton transport mechanism in the weak coupling regime through steady-state time-resolved fluorescence studies combined with quantum-chemical based Monte-Carlo simulations without adjustable parameters. Despite weak chromophore coupling and dilution by the host, the exciton diffusion length exceeds 50 nm similar to molecular crystals, and might be tuned to the μm range by the proper choice of host and guest materials.     

Boronic acids in the design and synthesis of supramolecular assemblies

Supramolecular assemblies of phenylboronic and 4-methoxyphenylboronic acids with 4,4^′-bipyridine and an assembly of phenylboronic acid with 1,2-bis(4-pyridyl)ethene, which were obtained due to the formation of O-H?N hydrogen bonds between hetero N-atoms and -B(OH)₂ are reported. Further, a centrosymmetric cyclic C-H?O hydrogen bonding dimer is identified in the crystal structure of 4-methoxyphenylboronic acid.     

Radiolytic syntheses of nanoparticles in supramolecular assemblies

Ionizing radiation is a powerful method in the syntheses of nanoparticles (NPs). The application of ionizing radiation in supramolecular assemblies can afford us more unique conditions to control the composition and morphology of the NPs. So far, most work focused on water-in-oil (W/O) microemulsions or reversed micelles. In this supramolecular organization, it has been proved that the effects of many conditions on the yield of e_aq⁻ play a key role, remarkably different from the mechanism in routine chemical method. Besides, some supramolecular assemblies of cyclodextrins and ionic liquids have been used in the syntheses of NPs by ionizing radiation, and many novel and interesting phenomena appeared. This review is intended to underline the three significant aspects of the radiolytic syntheses of NPs in supramolecular assemblies.     

Kinetic investigation of porphyrin interaction with chiral templates reveals unexpected features of the induction and self-propagation mechanism of chiral memory

Kinetics of the porphyrin aggregation leading to a chiral memory system shows a remarkable "catalytic" effect of the noncovalent templates explaining their self-replication ability.