Quantitative measure for the "nakedness" of fluoride ion sources

A quantitative measure for the donor strength or "nakedness" of fluoride ion donors is presented. It is based on the free energy change associated with the transfer of a fluoride ion from the donor to a given acceptor molecule. Born-Haber cycle calculations were used to calculate both the free energy and the enthalpy change for this process. The enthalpy change is given by the sum of the fluoride ion affinity of the acceptor (as defined in strict thermodynamic convention) and the lattice energy difference (DeltaU(POT)) between the fluoride ion donor and the salt formed with the acceptor. Because, for a given acceptor, the fluoride affinity has a constant value, the relative enthalpy (and also the corresponding free energy) changes are governed exclusively by the lattice energy differences. In this study, BF(3), PF(5), AsF(5), and SbF(5) were used as the acceptors, and the following seven fluoride ion donors were evaluated: CsF, N(CH(3))(4)F (TMAF), N-methylurotropinium fluoride (MUF), hexamethylguanidinium fluoride (HMGF), hexamethylpiperidinium fluoride (HMPF), N,N,N-trimethyl-1-adamantylammonium fluoride (TMAAF), and hexakis(dimethylamino)phosphazenium fluoride (HDMAPF). Smooth relationships between the enthalpy changes and the molar volumes of the donor cations were found which asymptotically approach constant values for infinitely large cations. Whereas CsF is a relatively poor F(-) donor [(U(POT)(CsF) - U(POT)(CsSbF(6))) = 213 kJ mol(-)(1)], when compared to N(CH(3))(4)F [(U(POT)(TMAF) - U(POT)(TMASbF(6))) = 69 kJ mol(-)(1)], a 4 times larger cation (phosphazenium salt) and an infinitely large cation are required to decrease DeltaU(POT) to 17 and 0 kJ mol(-)(1), respectively. These results clearly demonstrate that very little is gained by increasing the cation size past a certain level and that secondary factors, such as chemical and physical properties, become overriding considerations.     

Organic electrosynthesis using a fluoride ion mediator

Recent studies on fluoride ion-mediated anodic methoxylation of fluoroalkyl sulfides and sulfur-containing five-membered heterocyclic compounds together with its synthetic applications are summarized in this review. The first example of anodic methoxylation of 2-acyloxy-3,3,3-trifluoropropyl sulfides accompanying with [1,2]-rearrangement of acyloxy group is described. Fluoride ion-mediated anodic intramolecular cyclization of 3,3,3-trifluoropropyl sulfides bearing OH and t-BuCOO groups provides CF₃-containing 1,3-oxathiolane and ethylene carbonate derivatives, respectively. Fluoride ion mediator can be also applied to anodic intramolecular carbon–carbon coupling to form oxindole and 3-oxotetrahydroisoquinoline derivatives.     

Formation of sol-gel nanostructured mullite by additions of fluoride ion

Summary The subject of this study was to investigate the effect of fluoride ions addition on the temperature of sol gel mullite formation based on the hypotheses that the presence of fluoride ions can decrease the temperature of mullite formation (in respect to common 980°C, in sol-gel processing). Polymeric sols were prepared by mixing TEOS and aluminum nitrate nanohydrate and by adding fluoride ions (from 2 to 5 mass%). DTA, TG, XRD and SEM were used for characterisation of mullite gel and crystalline mullite. The experimental results confirmed that the addition of fluoride ions decrease the temperature of mullite formation up to 890°C for the fluorine concentration of 3.5 mass%. Experimental results showed that the temperature of mullite formation is not a simple function of the fluoride ion content. The mechanism of fluorine effect was discussed in terms of the gelling process, gel structure and the phase separation before the mullite formation.     

Silsesquioxane-based homogeneous and heterogeneous epoxidation catalysts developed by using high-speed experimentation

A set of new titanium-silsesquioxane epoxidation catalysts was discovered by exploring the hydrolytic condensation of a series of trichlorosilanes in highly polar solvents by means of high-speed experimentation techniques. The most promising silsesquioxane leads were prepared on a conventional laboratory scale and fully characterised. The lead generated by the hydrolytic condensation of tBuSiCl(3) in DMSO consisted of a set of incompletely condensed silsesquioxane structures, whereas that obtained from the hydrolytic condensation of tBuSiCl(3) in water consisted of a single silsesquioxane structure, tBu(2)Si(2)O(OH)(4). This is the first reported example of the use of this silsesquioxane as a precursor for active Ti catalysts. The Ti complexes prepared with tBu(2)Si(2)O(OH)(4) were supported on silica to produce active heterogeneous epoxidation catalysts.     

Distinguishing homogeneous from heterogeneous catalysis in electrode-driven water oxidation with molecular iridium complexes

Molecular water-oxidation catalysts can deactivate by side reactions or decompose to secondary materials over time due to the harsh, oxidizing conditions required to drive oxygen evolution. Distinguishing electrode surface-bound heterogeneous catalysts (such as iridium oxide) from homogeneous molecular catalysts is often difficult. Using an electrochemical quartz crystal nanobalance (EQCN), we report a method for probing electrodeposition of metal oxide materials from molecular precursors. Using the previously reported [Cp*Ir(H(2)O)(3)](2+) complex, we monitor deposition of a heterogeneous water oxidation catalyst by measuring the electrode mass in real time with piezoelectric gravimetry. Conversely, we do not observe deposition for homogeneous catalysts, such as the water-soluble complex Cp*Ir(pyr-CMe(2)O)X reported in this work. Rotating ring-disk electrode electrochemistry and Clark-type electrode studies show that this complex is a catalyst for water oxidation with oxygen produced as the product. For the heterogeneous, surface-attached material generated from [Cp*Ir(H(2)O)(3)](2+), we can estimate the percentage of electroactive metal centers in the surface layer. We monitor electrode composition dynamically during catalytic turnover, providing new information on catalytic performance. Together, these data suggest that EQCN can directly probe the homogeneity of molecular water-oxidation catalysts over short times.     

Studies on fluoride complexing of hexavalent actinides using a fluoride ion selective electrode

Complex formation between actinide(VI) and fluoride ions in aqueous solutions has been investigated using a fluoride ion selective electrode (F-ISE). As fairly high acidity was used to suppress hydrolysis of the actinide(VI) ions, significant liquid junction potentials (E_j) existed in the systems. An iterative procedure was developed for computing free hydrogen ion concentration [H⁺], as it could not be measured directly, using data obtained with F-ISE. E_j values were estimated from known [H⁺] and the stability constants of fluoride complexes of actinide(VI) ions were calculated following KING and GALLAGHER's method using a computer program. The stability constants were found to follow the order U(VI)>Np(VI)>Pu(VI).     

Solvation in homogeneous and heterogeneous media

A short account on solvation of solute in Homogeneous and Heterogeneous Media has been presented. Basic concepts of specific and nonspecific interactions with some specific examples are discussed based on Koppel and Palm (KP) and Abaham, Kamlet and Taft (AKT) approaches. List of AKT parameters describing specific and non-specific solvation parameters for homogeneous media (pure solvents) and heterogeneous media (micelles) has been presented in tables.     

Microdetermination of the fluoride ion using an amplification reaction

Summary A new simple, rapid and accurate amplification micro method for fluoride determination is described. It is based on the reaction between the sparingly soluble calcium iodate and the fluoride ion. After adding isopropyl alcohol to the solution, so that its final concentration is 65%, and filtering, an equivalent amount of the iodate is obtained. The latter is titrated iodometrically resulting in a six-fold amplification of the titre. The method is reproducible over a range from 0.4–8 mg fluoride ion. The mean recovery is 99.69%, after applying a correction factor due to potassium iodate solubility.

---

Zusammenfassung Ein Multiplikationsverfahren zur Mikrobestimmung von Fluorid wurde beschrieben. Es beruht auf der Umsetzung zwischen dem schlecht löslichen Calciumjodat und Fluorid. Nach Zusatz von i-Propylalkohol, bis die Lösung 65% davon enthält, wird filtriert. Die äquivalente Jodatmenge wird jodometrisch titriert. Zwischen 0,4 und 8 mg Fluorid sind die Ergebnisse reproduzierbar. Bei Anwendung eines Korrekturfaktors wegen der Löslichkeit von Kaliumjodat wurden 99,69% Fluorid wieder gefunden.

     

Atom transfer radical polymerization of methyl methacrylate using copper-based homogeneous and heterogeneous catalysts

This study aimed at polymerization of methyl methacrylate with novel catalysts in the atom transfer radical polymerization (ATRP) condition at 90 °C. This was accomplished using CuBr/N-(2-aminoethyl)-3-aminopropyltrimethoxysilane (CuBr–AEAPTMS) as a homogeneous catalyst and one time with CuBr@AEAPTMS/SBA-15 as a heterogeneous catalyst. Catalysts were characterized using TGA, FT-IR, and UV–Vis spectroscopy. The structural analysis of the polymer was carried out by ¹³C NMR spectroscopy and GPC. Three characteristic parts of polymer produced by ATRP method including the initiator, monomer units, and end group was shown in ¹³C NMR spectra. In addition, the presence of C–Br unit showed that the polymerization process is alive. The ¹H NMR analysis was used for kinetic investigation of methyl methacrylate polymerization with homogeneous and heterogeneous catalysts that showed high monomer conversion (98 and 90% after 35 min, respectively) and good control of molecular weight with a dispersity (Р= 1.5–1.7). In addition, the plot of ln ([monomer]₀/[monomer] _t ) versus time gave linear relationships indicating a constant concentration of the propagating species throughout the polymerization. Finally, the results of the polymerization using heterogeneous catalyst compared with homogeneous catalyst revealed that it was according to ATRP method.     

Rheology of anisotropic homogeneous and heterogeneous media

One of the main features of lyotropic and thermotropic liquid-crystalline (LC) polymers is non-homogeneity of their structure, which is reflected in their rheological properties. Relationships between some kinds of heterogeneities, viz. dynamic textures, isotropic-anisotropic biphasic region, superposition of different types of crystalline and mesophase structures, framework formed by fillers and rheological characteristics have been analyzed.     

Stabilisation of tetravalent cerium in perchloric acid medium and measurement of the stability constants of its fluoride complexes using ion selective potentiometry

The stability constants of the fluoride complexes of cerium(IV) in 1 M (HClO(4), NaClO(4)) medium have been measured potentiometrically using a fluoride ion-selective electrode. Quantitative oxidation of cerium to its tetravalent state and its stabilisation in the perchlorate medium were accomplished by oxidation with AgO followed by quick addition of a known amount of fluoride ion. This procedure ensures stability of the oxidation state and prevents hydrolysis and polymerisation of Ce(IV). Logarithms of the average values of beta(1), beta(2), beta(3) and beta(4) were estimated to be 7.57+/-0.04, 14.50+/-0.03, 20.13+/-0.37 and 24.14+/-0.10 respectively.     

Mechanistic aspects of homogeneous and heterogeneous melting processes

Molecular dynamics simulations have been employed to explore the response of crystalline Ar systems with and without a free surface to a gradual temperature rise. The surface-free crystalline bulk undergoes a homogeneous melting process at the limit of superheating, whereas the semicrystal terminating with a free plane surface melts with a heterogeneous mechanism at a temperature corresponding to the equilibrium melting point. Numerical findings suggest that the gradual disordering of the crystalline lattice as well as the homogeneous and heterogeneous melting processes are mediated by atoms with defective coordination. Their concentration in the regions close to the semicrystal surface at the equilibrium melting point is found to be approximately the same as in the surface-free bulk at the limit of superheating.     

Enzymatic fluorination using fluoride ion generated from degradation of fluorinated materials

The recycle of fluoride ion generated from the degradation of 1-methyl-3-butylimidazolium tetrafluoroborate, diethyl methyl methoxyethylammonium tetrafluoroborate in the presence of Tris-HCl buffer solution and/or the biodegradation of fluorobenzene and benzotrifluoride, was described. The generated fluoride ion was reused to produce 5′-fluoro-5′-deoxyadenosine (5′-FDA), fluoroacetate and/or 4-fluorothreonine.     

在酸性介质中用氟电极测定氟离子的新方法

基于弱酸根离子在不同酸度溶液中的化学平衡和离子选择电极的响应特征, 本文推导出了以氟电极为指示电极, 玻璃pH电极作参比在酸性介质中测定氟的新方法. 经验证： 当pH＜2时, 氟离子浓度在10^-2～10^-5 mol/L范围内, 电池电动势值与氟离子总量呈能斯特响应, 试液中少量铝的存在对测定不构成干扰. 用该法直接测定了酸蚀法铝型材废水中的氟, 加标回收率达96%～98%.     

Gold-catalyzed cyanosilylation reaction: homogeneous and heterogeneous pathways

Gold had been considered to be an extremely inert metal, but recently it was found that nanometer-sized gold particles on metal-oxide supports acted as catalysts for simple organic reactions, such as oxidation and hydrogenation, even at or below room temperature. Herein, we report that gold nanoparticles (AuNPs) of zero oxidation state (Au0) are catalytically active for a C--C bond-forming reaction, the cyanosilylation of aldehydes. The AuNP-catalyzed cyanosilylation proceeded smoothly at room temperature with 0.2 wt % loading of AuNPs. The reactions of aromatic aldehydes were almost quantitative, except for benzaldehyde derivatives containing the electron-withdrawing NO2 group, and alpha,beta-unsaturated aromatic aldehydes were the most reactive substrates. The reactions also went smoothly for aliphatic aldehydes. Mechanistic studies indicated that the reactions proceeded both homogeneously and heterogeneously: homogeneous catalysis by leached gold species and heterogeneous catalysis by the adsorption of the reactants (aldehydes and trimethylsilyl cyanide) onto AuNPs. The ratio of homogeneous and heterogeneous catalysis was estimated to be approximately 4:1.     

Controlled polymer synthesis in homogeneous and heterogeneous processes

Research in polymer synthesis can be oriented toward method or structure. This review is intended to document both approaches. Recent examples from our own work as well as future prospectives will be presented. A general concern is to work out the impact from organic and supramolecular chemistry. Examples of method oriented work are (i) a unique polycondensation via carbon sulfur‐bond formation providing hybrid structures of, e.g., polyphenylenesulfide and polyaniline; (ii) a triazoline additive establishing a novel self‐regulation process in controlled radical polymerization; (iii) a metallocene catalyzed polyolefin synthesis which is performed by using “smart”, reversibly cross‐linked polymer resins as support; and (iv) hydrogen‐bonded aggregates suggesting new emulsifiers for emulsion polymerization thus leading to functional nanoparticles. Examples of structure oriented work are (i) rod‐coil block copolymers (1D case) as a “covalently bound combination” of rigid and flexible segments whereby a key synthetic concern is the chemical modification and quantitative end‐functionalization of polyphenylene chains; (ii) discs (2D case) as molecularly defined graphite subunits which are obtained via a remarkably mild intramolecular cyclodehydrogenation; and (iii) dendrimers (3D case) as shape‐persistent nanoparticles whose high degree of structural precision results from a new cycloaddition‐deprotection protocol.     

Ethylene polymerization and ethylene/1-hexene copolymerization using homogeneous and heterogeneous unbridged bisindenyl zirconocene catalysts

Unbridged bis-substituted-indenyl zirconocene complexes, [(2,4-Me₂Ind)₂ZrCl₂, Met-1; (2,4,6-Me₃Ind)₂ZrCl₂, Met-2], were supported on silica and montmorillonite carriers (resulting in silica-supported catalysts MS-1 and MS-2, and montmorillonite-supported catalyst MT-1). Ethylene polymerization by homogeneous and heterogeneous catalysts showed high activity, affording polyethylenes with high molecular weight. The catalytic activity and the molecular weight of the polymer were improved using the heterogeneous systems. The activities for the ethylene/1-hexene copolymerization by heterogeneous systems were lower than those using homogeneous systems, however, the comonomer was incorporated efficiently into polymer in both the homo- and the heterogeneous systems, and moreover, the microstructure of the copolymer derived from the heterogeneous catalysts showed different characteristics from those resulting from the homogeneous systems. The r_Er_H values of the heterogeneous catalysts (1.82 for MS-1 and 0.70 for MS-2), are quite different from those of their homogeneous analogues (1.25 for Met-1 and 1.26 for Met-2).