Electrochemical fluorination of acetamide and formamide in a molten KH2F3

The electrofluorination of acetamide (CH₃CONH₂) and formamide (HCONH₂) on the anode was studied in a molten KH₂F₃ at 120°C. Amorphous carbon was used as the anode and Pt rod as the reference electrode. Anodic products were analyzed by both gas chromatography and infrared spectroscopy.In the both CH₃CONH₂ and HCONH₂, the anode effect did not occur in the current density range of 3-11mA²cm² and anode gas was then composed of N₂(+O₂), NF₃, CF₄, C₂F₆, N₂O, CO₂(+COF₂) and so on. The addition of 1.0w% LIF to the electrolyte was available for prevention from the anode effect.From these results, it is suggested that CH₃CONH₂ and HCONH₂ would react chemically with fluorine radical produced by the discharge of fluoride ion and that the change of the C_mF_n [(CF)_n?I] film on the anode to (CF)_n [(CF)_n?II] film was prevented specially in the case of HCONH₂. The mechanism of electrofluorination of CH₃CONH₂ in the melt is as folIows; CH₃CONH₂

CH₃COF,·NH₂

N₂,NF₃,CF₄,C₂F₆,CHF₃,COF₂(CO₂),N₂O.     

Reaction of PF5·CH3CN with sulfide

Nitriles react with PF₅ and also with AsF₅, SbF₅ forming 1:1-adducts. Using C₂Cl₃F₃ as a solvent is of advantage for this reaction. PF₅·CH₃CN and [N(C₂H₅)₄]SH give [N(C₂H₅)₄][P₂S₂F₈] with a sulfur double bridge and hexafluorophosphate in acetonitrile [1]. In case of AsF₅·CH₃CN a salt with the anion [AsF₅NHCSCH₃]^? has been isolated [2]. Following products have been confirmed in a reaction mixture of PF₅·CH₃CN and SH^? in acetonitrile by NMR (³¹P and ¹⁹F): [PF₆]^?, [F₅PSPF₅]^2?,

, F₄PSH, F₃PS, HPS₂F₂, [PS₂F₂]^?, [F₅PNC(SH)CH₃]^?, [F₅PNHCSCH₃]^?, [F₅PSH]^?. With a ratio PF₅·CH₃CN: SH^? = 2:1 the S-bridge-complexes are prefered whereas in case of a ratio 1:1 the non-bridged P-complexes are the main products.     

Novel sandwich complexes of zirconium [C9H5(SiMe3)2](C5Me4R)ZrCl2 (R = CH3, CH2CH2NMe2): Synthesis and reduction behavior

Novel half-sandwich [C₉H₅(SiMe₃)₂]ZrCl₃ (3) and sandwich [C₉H₅(SiMe₃)₂](C₅Me₄R)ZrCl₂ (R = CH₃ (1), CH₂CH₂NMe₂ (2)) complexes were prepared and characterized. The reduction of 2 by Mg in THF lead to (η⁵-C₉H₅(SiMe₃)₂)[η⁵:η²(C,N)-C₅Me₄CH₂CH₂N(Me)CH₂]ZrH (7). The structure of 7 was proved by NMR spectroscopy data. Hydrolysis of 2 resulted in the binuclear complex ([C₅Me₄CH₂CH₂NMe₂]ZrCl₂)₂O (6). The crystal structures of 1 and 6 were established by X-ray diffraction analysis.     

Hydrogen bonding and halogen bonding co-existing in the reaction of heptafluorobenzyl iodide with N,N,N,N-tetramethylethylene diamine

Two novel assembling systems 3 and 4, with the structures of C₆F₅CF₂⁻?H⁺N(Me)₂CH₂CH₂(Me₂)N⁺H?⁻CF₂C₆F₅ and C₆F₅CF₂I?N(Me)₂CH₂CH₂(Me)₂N?ICF₂C₆F₅, respectively, have been generated from the solution of heptafluorobenzyl iodide 1 and N,N,N^′,N^′-tetramethylethylenediamine 2 in dichloromethane. Their structures have been characterized by X-ray diffraction analysis, NMR and IR spectroscopy. Intermolecular N?I halogen bond and F?H hydrogen bond are revealed to be the driving forces for their formation.     

Understanding the role of an easy-to-prepare aldimine-alkyne carboamination catalyst, [Ti(NMe2)3(NHMe2)][B(C6F5)4]

A series of reactivity studies of the carboamination pre-catalyst [Ti(NMe₂)₃(NHMe₂)][B(C₆F₅)₄] as well as the preparation of other catalysts are reported in this work. Treatment of [Ti(NMe₂)₃(NHMe₂)][B(C₆F₅)₄] with the aldimines Ar′NCHtol (Ar′ = 2,6-Me₂C₆H₃, tol = 4-MeC₆H₄), and depending on the reaction conditions, results in isolation of [Me₂NCHR′][B(C₆F₅)₄] (1) or (Me₂N)₂CHtol, as well as the asymmetric titanium dimer [(Me₂N)₂(HNMe₂)Ti(μ₂-N[2,6-Me₂C₆H₃])₂Ti(NHMe₂)(NMe₂)][B(C₆F₅)₄] (2). Protonation of CpTi(NMe₂)₃ and Cp^∗Ti(NMe₂)₃ results in isolation of the salts, [CpTi(NMe₂)₂(NHMe₂)][B(C₆F₅)₄] (3) and [Cp^∗Ti(NMe₂)₂(NHMe₂)][B(C₆F₅)₄] (4), respectively. Treatment of compounds 3 or 4 with H₂N[2,6-ⁱPr₂C₆H₃] results in formation of the imido salts [CpTi(N[2,6-ⁱPr₂C₆H₃])(NHMe₂)₂][B(C₆F₅)₄] (5) (58% yield) or [Cp^∗Ti(N[2,6-ⁱPr₂C₆H₃])(NHMe₂)₂][B(C₆F₅)₄] (6). When Ti(NMe₂)₄ is treated with [Et₃Si][B(C₆F₅)₄], the salt [Ti(NMe₂)₃(N[SiEt₃]Me₂)][B(C₆F₅)₄] (7) is obtained, and treatment of the latter with [2,6-ⁱPr₂C₆H₃]NCHtol produces the imine adduct [Ti(NMe₂)₃(κ¹-[2,6-ⁱPr₂C₆H₃]NCHtol)][B(C₆F₅)₄] (8). The carboamination catalytic activity of complexes 2-7 was investigated and compared to [Ti(NMe₂)₃(NHMe₂)][B(C₆F₅)₄]. Likewise, a proposed mechanism to the active carboamination catalyst stemming from [Ti(NMe₂)₃(NHMe₂)][B(C₆F₅)₄] is described.     

Synthesis of fluorinated trithioether compounds: X-ray structures of 1,3,5-(CH2SRf)3-2,4,6-(CH3)3C6, Rf = C6F5, 4-HC6F4, or 2-FC6H4

A series of three new trithioether compounds containing fluorinated phenyl moieties, 1,3,5-(CH₂SR_f)₃-2,4,6-(CH₃)₃C₆, R_f = C₆F₅ (1), 4-HC₆F₄ (2), or 2-FC₆H₄ (3), were prepared by treatment of 1,3,5-(CH₂Br)₃-2,4,6-(CH₃)₃C₆ with the corresponding Pb(SC₆F₅)₂ or NaSR_f. The new structures were verified by elemental analyses, IR, ¹H NMR, ¹⁹F NMR spectroscopies, and mass spectra. The single crystal X-ray diffraction studies of 1-3 show a similar cis,trans,trans-conformation for the three fluorophenylthiomethyl groups attached to the central benzene ring with all dihedral angles between planes of central ring and external rings close to 0°, giving flat molecules. Comparing, 1-3 with closely related tripodal molecules built-up on 2,4,6-trimethylbenzene, arrangement of one SR group respect to others seems to be defined by the nature of the R substituent. Then in the case of 1-3, a parallel arrangement of rings is favored over an orthogonal one, which would bring the ortho-F atoms close to H atoms of the methylene groups.     

Hydrothermal synthesis, crystal structure, and characterization of a new pseudo-two-dimensional uranyl oxyfluoride, [N(C2H5)4]2[(UO2)4(OH2)3F10]

A new uranyl oxyfluoride, [N(C₂H₅)₄]₂[(UO₂)₄(OH₂)₃F₁₀] has been synthesized by a hydrothermal reaction technique using (C₂H₅)₄NBr, UO₂(OCOCH₃)₂·2H₂O, and HF as reagents. The structure of [N(C₂H₅)₄]₂[(UO₂)₄(OH₂)₃F₁₀] has been determined by a single-crystal X-ray diffraction technique. [N(C₂H₅)₄]₂[(UO₂)₄(OH₂)₃F₁₀] crystallizes in the monoclinic space group P2₁/n (No. 14), with , , , β=98.88(3)°, , and Z=4. [N(C₂H₅)₄]₂[(UO₂)₄(OH₂)₃F₁₀] reveals a novel pseudo-two-dimensional crystal structure that is composed of UO₂F₅, UO₃F₄, and UO₄F₃ pentagonal bipyramids. Each uranyl pentagonal bipyramid shares edges and corners through F atoms to form a six-membered ring. The rings are further interconnected to generate infinite strips running along the b-axis. [N(C₂H₅)₄]₂[(UO₂)₄(OH₂)₃F₁₀] has been further characterized by elemental analysis, bond valence calculations, Infrared and Raman spectroscopy, and thermogravimetric analysis.     

Explored routes to unknown polyfluoroorganyliodine hexafluorides, RFIF6

Two routes to R_FIF₆ compounds were investigated: (a) the substitution of F by R_F in IF₇ and (b) the fluorine addition to iodine in R_FIF₄ precursors. For route (a) the reagents C₆F₅SiMe₃, C₆F₅SiF₃, [NMe₄][C₆F₅SiF₄], C₆F₅BF₂, and 1,4-C₆F₄(BF₂)₂ were tested. C₆F₅IF₄ and CF₃CH₂IF₄ were used in route (b) and treated with the fluoro-oxidizers IF₇, [O₂][SbF₆]/KF, and K₂[NiF₆]/KF. The observed sidestep reactions in case of routes (a) and (b) are discussed. Interaction of C₆F₅SiX₃ (X = Me, F), C₆F₅BF₂, 1,4-C₆F₄(BF₂)₂ with IF₇ gave exclusively the corresponding ring fluorination products, perfluorinated cyclohexadiene and cyclohexene derivatives, whereas [NMe₄][C₆F₅SiF₄] and IF₇ formed mixtures of C₆F_nIF₄ and C₆F_nH compounds (n = 7 and 9). CF₃CH₂IF₄ was not reactive towards the fluoro-oxidizer IF₇, whereas C₆F₅IF₄ formed C₆F_nIF₄ compounds (n = 7 and 9). C₆F₅IF₄ and CF₃CH₂IF₄ were inert towards [O₂][SbF₆] in anhydrous HF. CF₃CH₂IF₄ underwent C-H fluorination and C-I bond cleavage when treated with K₂[NiF₆]/KF in HF. The fluorine addition property of IF₇ was independently demonstrated in case of perfluorohexenes. C₄F₉CFCF₂ and IF₇ underwent oxidative fluorine addition at −30 °C, and the isomers (CF₃)₂CFCFCFCF₃ (cis and trans) formed very slowly perfluoroisohexanes even at 25 °C. The compatibility of IF₇ and selected organic solvents was investigated. The polyfluoroalkanes CF₃CH₂CHF₂ (PFP), CF₃CH₂CF₂CH₃ (PFB), and C₄F₉Br are inert towards iodine heptafluoride at 25 °C while CF₃CH₂Br was slowly converted to CF₃CH₂F. Especially PFP and PFB are new suitable organic solvents for IF₇.     

A well feasible and general route to (organoethynyl)difluoroboranes, RHCCBF2, and their perfluorinated analogues, RFCCBF2

A representative series of (organoethynyl)difluoroboranes RCCBF₂ (RC₄H₉, (CH₃)₃C, CF₃, C₃F₇, (CF₃)₂CF, CF₃CFCF, C₄F₉CFCF, C₆F₅) was prepared by abstraction of fluoride from the corresponding K[RCCBF₃] salts with BF₃ in appropriate solvents (1,1,1,3,3-pentafluoropropane, 1,1,1,3,3-pentafluorobutane, or dichloromethane).     

Perfluoroethyl amines from the electrochemical fluorination of trimethylamine. Nmr and vibrational spectra of new fluoroalkyl amines

The perfluoroethyl amines C₂F₅N(CF₃)₂, C₂F₅N(CF₃)CHF₂, and C₂F₅N(CHF₂)₂ have been isolated from the electrofluorination of N(CH₃)₃ as well as C₂H₅N(CH₃)₂. Evidence is presented that, in the former case, the C₂F₅ compounds are formed by ·CF₃ attack on partly fluorinated trimethylamines NC₃F_9?nH_n, n = 1 to 3. The compounds have been characterized by analytical, nmr and vibrational spectroscopic methods.     

Electrorheological properties and structure of (BaTiO(C2O4)2/NH2CONH2)

The core-shell structural (BaTiO(C₂O₄)₂/NH₂CONH₂) samples of giant electrorheological (ER) activity have been synthesized by a sol-gel method and studied by TEM, X-ray diffraction and IR spectroscopy. From the analysis of the X-ray diffraction, it is found that the component of samples is (BaTiO(C₂O₄)₂/NH₂CONH₂) with a different content of urea. The observations of the TEM morphology show that (BaTiO(C₂O₄)₂/NH₂CONH₂) particles are spheral with a size of around 80 nm and a surface coating with 5-10 nm thickness consisting of urea. The samples show an increasing tend of ER effect as the addition of urea increasing. Moreover, by IR spectroscopy study, it is revealed that some peaks of CO band and C-O band vibrations of BaTiO(C₂O₄)₂ are split into two peaks after urea added. The extent of the splits increase with the increase of urea content, which is resulted by the interaction between the chemical bonds of urea and oxalate of BaTiO(C₂O₄)₂. It is evident that the giant ER activity of the sample has a close relationship with the interfacial polarization between the core and the shell of (BaTiO(C₂O₄)₂/NH₂CONH₂).     

Bis(perfluoroorganyl)bromonium salts [(RF)2Br]Y (RF = aryl, alkenyl, and alkynyl)

Bromonium salts [(R_F)₂Br]Y with perfluorinated groups R_FC₆F₅, CF₃CFCF, C₂F₅CFCF, and CF₃C≡C were isolated from reactions of BrF₃ with R_FBF₂ in weakly coordinating solvents (wcs) like CF₃CH₂CHF₂ (PFP) or CF₃CH₂CF₂CH₃ (PFB) in 30-90% yields. C₆F₅BF₂ formed independent of the stoichiometry only [(C₆F₅)₂Br][BF₄]. 1:2 reactions of BrF₃ and silanes C₆F₅SiY₃ (Y = F, Me) ended with different products - C₆F₅BrF₂ or [(C₆F₅)₂Br][SiF₅] - as pure individuals, depending on Y and on the reaction temperature (Y = F). With C₆F₅SiF₃ at ≥−30 °C [(C₆F₅)₂Br][SiF₅] resulted in 92% yield whereas the reaction with less Lewis acidic C₆F₅SiMe₃ only led to C₆F₅BrF₂ (58%). The interaction of K[C₆F₅BF₃] with BrF₃ or [BrF₂][SbF₆] in anhydrous HF gave [(C₆F₅)₂Br][SbF₆]. Attempts to obtain a bis(perfluoroalkyl)bromonium salt by reactions of C₆F₁₃BF₂ with BrF₃ or of K[C₆F₁₃BF₃] with [BrF₂][SbF₆] failed. The 3:2 reactions of BrF₃ with (C₆F₅)₃B in CH₂Cl₂ gave [(C₆F₅)₂Br][(C₆F₅)_nBF_4−n] salts (n = 0-3). The mixture of anions could be converted to pure [BF₄]⁻ salts by treatment with BF₃·base.     

Hydroxy- and boronic-acid-functionalized carbosilanes: Synthesis and solid state structure of Si(C6H4-4-SiMe2((CH2)3OH))4

Consecutive synthesis methodologies for the preparation of carbosilanes (Ph)(Me)Si((CH₂)₃B(OH)₂)₂ (2), Si(C₆H₄-4-SiMe₂((CH₂)₃B(OH)₂))₄ (5), (Ph)(Me)Si((CH₂)₃OH)₂ (3), and Si(C₆H₄-4-SiMe_3−n((CH₂)₃OH)_n)₄ (6a, n = 1; 6b, n = 2; 6c, n = 3) are reported. Boronic acids 2 and 5 are accessible by treatment of (Ph)(Me)Si(CH₂CHCH₂)₂ (1) or Si(C₆H₄-4-SiMe₂(CH₂CHCH₂))₄ (4a) with HBBr₂·SMe₂ followed by addition of water, while 3 and 6 are available by the hydroboration of 1 or Si(C₆H₄-4-SiMe_3−n(CH₂CHCH₂)_n)₄ (4a, n = 1; 4b, n = 2; 4c, n = 3) with H₃B·SMe₂ and subsequent oxidation with H₂O₂.The single molecular structure of 6a in the solid state is reported. Representative is that 6a crystallized in the chiral non-centrosymmetric space group P2₁2₁2₁ forming 2D layers due to intermolecular hydrogen bond formation of the HO functionalities along the crystallographic a and c axes.     

Chemistry of diphenyltetrafluorophosphazene: Reactions with dilithiated diols

Reaction of gem-diphenyltetrafluorophosphazene, [1,1-(C₆H₅)₂]P₃N₃F₄ (1) with LiO(CH₂)₃OLi resulted in the formation of four products, spiro-{3,3-[O(CH₂)₃O]}[1,1-(C₆H₅)₂]P₃N₃F₂ (2), ansa-{3,5-[O(CH₂)₃O]}[1,1-(C₆H₅)₂P₃N₃F₂] (3), bridged-[1,1-(C₆H₅)₂N₃P₃F₃][O(CH₂)₃O][1,1-(C₆H₅)₂N₃P₃F₃] (4) and dangling-[HO(CH₂)₃O][1,1-(C₆H₅)₂P₃N₃F₃] (5) derivatives of 1, among which compound 5 was found to be the major product. Reaction of 1 with the dilithiated ferrocene derived diol, FcCH₂P(S)(CH₂OLi)₂ resulted in the formation of two isomers of ansa substituted fluorophosphazenes namely endo-[1,1-(C₆H₅)₂]{3,5-[FcCH₂P(S)(CH₂O)₂]}P₃N₃F₂ (6) and exo-[1,1-(C₆H₅)₂]{3,5-[FcCH₂P(S)(CH₂O)₂]}P₃N₃F₂ (7). These were formed along with the spiro isomer [1,1-(C₆H₅)₂]{3,3-[FcCH₂P(S)(CH₂O)₂]}P₃N₃F₂ (8) the dangling derivative [1,1-(C₆H₅)₂P₃N₃F₃][OCH₂(FcCH₂)P(S)CH₂OH] (9) and the bridged compound [1,1-(C₆H₅)₂P₃N₃F₃][OCH₂(FcCH₂)P(S)CH₂O][1,1-(C₆H₅)₂P₃N₃F₃] (10). All compounds were separated by column chromatography and characterized by ¹H, ³¹P{¹H}, ¹⁹F NMR, mass spectra and elemental analysis. The spirocyclic compound 8 was also characterized by X-ray crystallography.     

New types of asymmetrical bromonium salts [RF(RF′)Br]Y where RF and/or RF′ represent perfluorinated aryl, alkenyl, and alkynyl groups

A series of previously unknown asymmetrical fluorinated bis(aryl)bromonium, alkenyl(aryl)bromonium, and alkynyl(aryl)bromonium salts was prepared by reactions of C₆F₅BrF₂ or 4-CF₃C₆H₄BrF₂ with aryl group transfer reagents Ar′SiF₃ (Ar′ = C₆F₅, 4-FC₆H₄, C₆H₅) or perfluoroorganyl group transfer reagents R_F′BF₂ (R_F = C₆F₅, trans-CF₃CFCF, C₃F₇C≡C) preferentially in weakly coordinating solvents (CCl₃F, CCl₂FCClF₂, CH₂Cl₂, CF₃CH₂CHF₂ (PFP), CF₃CH₂CF₂CH₃ (PFB)). The presence of the base MeCN and the influence of the adducts R_F′BF₂·NCMe (R_F = C₆F₅, CF₃C≡C) on reactions aside to bromonium salt formation are discussed. Reactions of C₆F₅BrF₂ with Alk_F′BF₂ in PFP gave mainly C₆F₅Br and Alk_F′F (Alk_F′ = C₆F₁₃, C₆F₁₃CH₂CH₂), presumably, deriving from the unstable salts [C₆F₅(Alk_F′)Br]Y (Y = [Alk_F′BF₃]⁻). Prototypical reactivities of selected bromonium salts were investigated with the nucleophile I^-and the electrophile H⁺. [4-CF₃C₆H₄(C₆F₅)Br][BF₄] showed the conversion into 4-CF₃C₆H₄Br and C₆F₅I when reacted with [Bu₄N]I in MeCN. Perfluoroalkynylbromonium salts [C_nF_2n+1C≡C(R_F)Br][BF₄] slowly added HF when dissolved in aHF and formed [Z-C_nF_2n+1CFCH(R_F)Br][BF₄].     

A method for molecular correlation energy calculations. Application to the determination of dissociation energies of diatomic and polyatomic molecules

A simple and economical method for molecular correlation energy calculations is developed. In this method, the internal part of the correlation energy is calculated by means of a CI in a minimal basis set and the non-internal part (semi-internal and all-external) is evaluated using an original atoms-in-molecule method. It is successfully applied to the determination of dissociation energies of some diatomic (H₂, NH, C₂, CN, N₂, CO, NO, O₂, F₂) and polyatomic (H₂O, N₂O, CO₂, N₃H, CH₂N₂, CH₂CO, C₂N₂) molecules. The results are compared to those obtained using very elaborate variational methods.Aspirant du Fonds National Belge de la Recherche Scientifique.     

Reactivity of 2,3-bis(2-pyridyl)pyrazine with [Re2(CO)8(CH3CN)2]: Molecular structures of [Re2(CO)8(C14H10N4)] and [Re2(CO)8(C14H10N4)Re2(CO)8]

The reaction of the labile compound [Re₂(CO)₈(CH₃CN)₂] with 2,3-bis(2-pyridyl)pyrazine in dichloromethane solution at reflux temperature afforded the structural dirhenium isomers [Re₂(CO)₈(C₁₄H₁₀N₄)] (1 and 2), and the complex [Re₂(CO)₈(C₁₄H₁₀N₄)Re₂(CO)₈] (3). In 1, the ligand is σ,σ′-N,N′-coordinated to a Re(CO)₃ fragment through pyridine and pyrazine to form a five-membered chelate ring. A seven-membered ring is obtained for isomer 2 by N-coordination of the 2-pyridyl groups while the pyrazine ring remains uncoordinated. For 2, isomers 2a and 2b are found in a dynamic equilibrium ratio [2a]/[2b]  =  7 in solution, detected by ¹H NMR (−50 °C, CD₃COCD₃), coalescence being observed above room temperature. The ligand in 3 behaves as an 8e-donor bridge bonding two Re(CO)₃ fragments through two (σ,σ′-N,N′) interactions. When the reaction was carried out in refluxing tetrahydrofuran, complex [Re₂(CO)₆(C₁₄H₁₀N₄)₂] (4) was obtained in addition to compounds 1-3. The dinuclear rhenium derivative 4 contains two units of the organic ligand σ,σ′-N,N′-coordinated in a chelate form to each rhenium core. The X-ray crystal structures for 1 and 3 are reported.     

On the synthesis of the N2F+5 cation. A critical comment on the paper by Toy and Stringham.

Toy and Stringham recently reported [1] the synthesis of N₂F⁺₅ (CF₃)₃CO^-, a salt containing the novel pentafluorohydrazinium cation. This cation would be of significant academic and practical interest [2] since it would constitute the first known example of a substituted NF⁺₄ cation, i.e. an NF⁺₄ cation in which a fluorine ligand is replaced by an NF₂ group. According to the authors of [1], N₂F⁺₅(CF₃)₃CO^- was formed in a very unusual reaction involving the transfer of a fluorine cation from (CF₃)₃COF to N₂F₄ according to:

     

Synthesis and characterization of three new fluorovanadate complexes: N(C2H5)4[VOF4], N(CH3)4[VOF3Cl], N(C4H9)4[VOF3Br] and theoretical calculations of VOF4, VOF3Cl and VOF3Br ions

The reaction of VOF₃ with (C₂H₅)₄NF, (CH₃)₄NCl and (C₄H₉)₄NBr salts in anhydrous CH₃CN produced new complexes with the anion general formula [VOF₃X]⁻ in that (X = F⁻, Cl⁻, Br⁻). These were characterized by elemental analysis, IR, UV/Visible and ¹⁹F NMR spectroscopy. The optimized geometries and frequencies of the stationary point are calculated at the B3LYP/6-311G level of theory. Theoretical results showed that the VX (X = F, Cl, Br) bond length values for the [VOF₃X]⁻ in compounds 1-3 are 1.8247, 2.4031 and 2.5595 Å, respectively. Also, the VF₅ bond length values in [VOF₃X]⁻ are 1.824, 1.812 and 1.802 Å, respectively. These results reveal that the bond order for VX bonds decrease from compounds 1 to 3, while for VF₅ bonds, the bond orders increase. It can be concluded that the decrease of VX bonds lengths and the increase of VF₅ bond lengths in compounds 1-3 result from the increase of the hyperconjugation from compounds 1 to 3. Harmonic vibrational frequencies and infrared intensities for VOF₄⁻, VOF₃Cl⁻ and VOF₃Br⁻ are studied by means of theoretical and experimental methods. The calculated frequencies are in reasonable agreement with the experiment values. These data can be used in models of phosphoryl transfer enzymes because vanadate can often bind to phosphoryl transfer enzymes to form a trigonal-bipyramidal structure at the active site.     

Complex formation of HCONH2 in CH3OH environment and investigation of linewidth changes of ν(CO) stretching and NH2 bending modes

The isotropic part of the Raman bands corresponding to NH₂ bending and ν(CO) stretching modes of formamide (HCONH₂) at ∼1593 and 1668 cm⁻¹, respectively, in neat HCONH₂ as well as in binary mixtures with methanol (CH₃OH) were reinvestigated. Variations of their linewidths exclusively with mole fractions of HCONH₂, in the range C = 0.1–0.9 were studied. The linewidth variation of the NH₂ bending mode shows a departure from the trend expected on the basis of concentration fluctuation model and this has been explained using a recently suggested empirical model by invoking the concept of microviscosities of the solute, HCONH₂ and the solvent, CH₃OH. The other peak at ∼1668 cm⁻¹ shows a peculiar variation of the linewidth with concentration having two minima at C = 0.8 and 0.4, which have been explained in terms of formation of hydrogen bonded complexes, NH₂HCO⋯HOCH₃, and NH₂HCO⋯(HOCH₃)₂ and the two phenomena, namely motional narrowing and diffusion dynamics being simultaneously operative. The equilibrium constants have been evaluated from the spectral data and their variation with total molar concentration has been presented.