Piecewise deterministic Markov process model for flexible manufacturing systems with preventive maintenance

In this paper, we consider a maintenance and production model of a flexible manufacturing system. The maintenance activity involves lubrication, routine adjustments, etc., which reduce the machine failure rates and therefore reduce the aging of the machines. The objective of the problem is to choose the rate of maintenance and the rate of production that minimize the overall costs of inventory/shortage, production, and maintenance. It is shown that the value function is locally Lipschitz. Then, the existence of the optimal control policy is shown, and necessary and sufficient conditions for optimality are obtained.This research has been supported by NSERC-Canada, Grant OGP-003644 and FCAR-NC0271F.     

Minimax production planning in failure-prone manufacturing systems

In this paper, we consider a minimax production planning model of a flexible manufacturing system with machines that are subject to random breakdown and repair. The objective is to choose the rate of production that minimizes the related minimax cost of production and inventory/shortage. The value function is shown to be the unique viscosity solution to the associated Hamilton-Jacobi-Isaacs equation. Under certain conditions, it is shown that the value function is continuously differentiable. A verification theorem is given to provide a sufficient condition for optimal control. Finally, two examples are solved explicitly.This research was supported by the Natural Sciences and Engineering Research Council of Canada under Grants OGP0036444 and A4169.     

Hierarchical controls in stochastic manufacturing systems with convex costs

This paper presents an extension of earlier research on heirarchical control of stochastic manufacturing systems with linear production costs. A new method is introduced to construct asymptotically optimal open-loop and feedback controls for manufacturing systems in which the rates of machine breakdown and repair are much larger than the rate of fluctuation in demand and rate of discounting of cost. This new approach allows us to carry out an asymptotic analysis on manufacturing systems with convex inventory/backlog and production costs as well as obtain error bound estimates for constructed open loop controls. Under appropriate conditions, an asymptotically optimal Lipschitz feedback control law is obtained.This work was partly supported by the NSERC Grant A4619, URIF, General Motors of Canada, and Manufacturing Research Corporation of Ontario.     

Experimental investigation of real-time scheduling in flexible manufacturing systems

This paper presents a new two-phase (TP) approximate method for real-time scheduling in a flexible manufacturing system (FMS). This method combines a reduced enumeration schedule generation algorithm with a 0–1 optimization algorithm. In order to make the combined algorithm practicable, heuristic rules are introduced for the selection of jobs to be scheduled. The relative performance of the TP method vis-a-vis conventional heuristic dispatching rules such as SPT, LPT, FCFS, MWKR, and LWKR is investigated using combined process-interaction/discrete-event simulation models. An efficient experimental procedure is designed and implemented using these models, and the statistical analysis of the results is presented. For the particular case investigated, the conclusions are very encouraging. In terms of mean flow time, the TP method performs significantly better than any other tested heuristic dispatching rules. Also, the experimental results show that using global information significantly improves the FMS performance.     

Hierarchical production control of a flexible manufacturing system

A hierarchical production control framework for a flexible manufacturing system is proposed. The machines in the system are subject to failures in a wide spectrum band. At first, failures are clustered near some discrete points on the failure spectrum in order to define the hierarchical model. Each level in the hierarchy corresponds to a discrete point on the failure spectrum. At each level, faster varying failures are modelled by their mean behaviour, and more slowly varying failures are treated as static. Then, a hierarchical controller of multiple time scale type is proposed. System control at each level is based on the work of Kimemia and Gershwin. Simulation results conclude the paper.     

Integrated cellular manufacturing systems design with production planning and dynamic system reconfiguration

This paper presents and analyzes a comprehensive model for the design of cellular manufacturing systems (CMS). A recurring theme in research is a piecemeal approach when formulating CMS models. In this paper, the proposed model, to the best of the authors’ knowledge, is the most comprehensive one to date with a more integrated approach to CMS design, where production planning and system reconfiguration decisions are incorporated. Such a CMS model has not been proposed before and it features the presence of alternate process routings, operation sequence, duplicate machines, machine capacity and lot splitting. The developed model is a mixed integer non-linear program. Linearization procedures are proposed to convert it into a linearized mixed integer programming formulation. Computational results are presented by solving some numerical examples, extracted from the existing literature, with the linearized formulation.     

The optimality of balancing workloads in certain types of flexible manufacturing systems

Symmetric mathematical programming is used to analyze the optimality of balancing workloads to maximize the expected production in a single-server closed queuing network model of a flexible manufacturing system (FMS). In particular, using generalized concavity we prove that, even though the production function is not concave, balancing workloads maximizes the expected production in certain types of m-machine FMS's with n parts in the system. Our results are compared and contrasted with previous models of production systems.     

On modeling failure and repair times in stochastic models of manufacturing systems using generalized exponential distributions

Failures of machines have a significant effect on the behavior of manufacturing systems. As a result it is important to model this phenomenon. Many queueing models of manufacturing systems do incorporate the unreliability of the machines. Most models assume that the times to failure and the times to repair of each machine are exponentially distributed (or geometrically distributed in the case of discrete-time models). However, exponential distributions do not always accurately represent actual distributions encountered in real manufacturing systems. In this paper, we propose to model failure and repair time distributions bygeneralized exponential (GE) distributions (orgeneralized geometric distributions in the case of a discretetime model). The GE distribution can be used to approximate distributions with any coefficient of variation greater than one. The main contribution of the paper is to show that queueing models in which failure and repair times are represented by GE distributions can be analyzed with the same complexity as if these distributions were exponential. Indeed, we show that failures and repair times represented by GE distributions can (under certain assumptions) be equivalently represented by exponential distributions.This work was performed while the author was visiting the Laboratory for Manufacturing and Productivity, Massachusetts Institute of Technology, Cambridge, MA 02139, USA.     

A numerical method to approximate optimal production and maintenance plan in a flexible manufacturing system

The simultaneous planning of the production and the maintenance in a flexible manufacturing system is considered in this paper. The manufacturing system is composed of one machine that produces a single product. There is a preventive maintenance plan to reduce the failure rate of the machine. This paper is different from the previous researches in this area in two separate ways. First, the failure rate of the machine is supposed to be a function of its age. Second, we assume that the demand of the manufacturing product is time dependent and its rate depends on the level of advertisement on that product. The objective is to maximize the expected discounted total profit of the firm over an infinite time horizon. In the process of finding a solution to the problem, we first characterize an optimal control by introducing a set of Hamilton–Jacobi–Bellman partial differential equations. Then we realize that under practical assumptions, this set of equations can not be solved analytically. Thus to find a suboptimal control, we approximate the original stochastic optimal control model by a discrete-time deterministic optimal control problem. Then proposing a numerical method to solve the steady state Riccati equation, we approximate a suboptimal solution to the problem.     

An optimization problem of manufacturing systems with stochastic machine breakdown and rework process

This paper is concerned with optimization of production run time that takes stochastic breakdown and the reworking of defective items into consideration. In a real‐life manufacturing process, production of imperfect quality items as well as random breakdowns of production equipment is inevitable. All defective items produced are assumed to be repairable through a rework process right after the regular production stops in each cycle. This research starts with derivations of the cost functions for production systems with breakdown (no‐resumption policy is considered) and without breakdown taking place, respectively. Then cost functions of both cases are integrated. Theorems on conditional convexity of the overall cost function and bounds for optimal production run time are proposed and proved. This study concludes that although the optimal run time cannot be expressed in a closed form, it falls within the range of bounds. Hence, it can be pinpointed by the use of the bisection method based on the intermediate value theorem. A numerical example is provided to demonstrate its practical usages. Copyright © 2007 John Wiley & Sons, Ltd.     

Age-dependent production planning and maintenance strategies in unreliable manufacturing systems with lost sale

In this paper, we formulate an analytical model for the joint determination of an optimal age-dependent buffer inventory and preventive maintenance policy in a production environment that is subject to random machine breakdowns. Traditional preventive maintenance policies, such as age and periodic replacements, are usually studied based on simplified and non-realistic assumptions, as well as on the expected costs criterion. Finished goods inventories and the age-dependent likelihood of machine breakdowns are usually not considered. As a result, these policies could significantly extend beyond the anticipated financial incomes of the system, and lead to crises. In order to solve this problem, a more realistic analysis model is proposed in this paper to consider the effects of both preventive maintenance policies and machine age on optimal safety stock levels. Hence, a unified framework is developed, allowing production and preventive maintenance to be jointly considered. We use an age-dependent optimization model based on the minimization of an overall cost function, including inventory holdings, lost sales, preventive and corrective maintenance costs. We provide optimality conditions for the manufacturing systems considered, and use numerical methods to obtain an optimal preventive maintenance policy and the relevant age-dependent threshold level production policy. In this work, this policy is called the multiple threshold levels hedging point policy. We include numerical examples and sensitivity analyses to illustrate the importance and the effectiveness of the proposed methodology. Compared with other available optimal production and maintenance policies, the numerical solution obtained shows that the proposed age-dependent optimal production and maintenance policies significantly reduce the overall cost incurred.     

Algorithms for part and machine selection in flexible manufacturing systems

Deciding whether FMS technology is viable for a given application, and if so, what machines should comprise the FMS and what parts should be produced on it, can be a difficult task. Manual methods suffice only for situations where a small number of FMS-type machines are to be considered and less than a few dozen candidate parts are to be chosen from. When both machines and parts are to be selected from a larger number of candidates, manual methods become cumbersome and time consuming, and computer-based decision aids become a necessity. This paper gives an overview of the required decision process, and then focuses on those stages for which computer-based decision aids can be used effectively. Particular decision aids are described, and case studies are cited to illustrate their motivation and use.     

Design,planning, scheduling,and control problems of flexible manufacturing systems

The design and use of flexible manufacturing systems (FMSs) involve some intricate operations research problems.FMS design problems include, for example, determining the appropriate number of machine tools of each type, the capacity of the material handling system, and the size of buffers.FMS planning problems include the determination of which parts should be simultaneously machined, the optimal partition of machine tools into groups, allocations of pallets and fixtures to part types, and the assignment of operations and associated cutting tools among the limited-capacity tool magazines of the machine tools.FMS scheduling problems include determining the optimal input sequence of parts and an optimal sequence at each machine tool given the current part mix.FMS control problems are those concerned with, for example, monitoring the system to be sure that requirements and due dates are being met and that unreliability problems are taken care of. This paper defines and describes these FMS problems in detail for OR/MS researchers to work on.     

Numerical methods for controls for nonlinear stochastic systems with delays and jumps: applications to admission control

We consider numerical methods of the Markov chain approximation type for computing optimal controls and value functions for systems governed by nonlinear stochastic delay equations. Earlier work did not allow Poisson random measure driving processes or delays that are concentrated on points with positive probability. In addition, the Poisson measures can be controlled. Previous proofs are not adequate for the present case. The algorithms are developed and convergence proved as the approximating parameters go to their limits. One motivating example concerns admissions control to a network, where the file arrival process is governed by a Poisson process, and arrivals might be admitted or not, according to the control, which leads to a controlled Poisson process. Numerical data for such an example are presented. The original problem is recast in terms of a transportation equation, which allows the development of practical algorithms. For the problems of interest, alternative methods can entail prohibitive memory and computational requirements.     

Controlled Markov Chains with Weak and Strong Interactions: Asymptotic Optimality and Applications to Manufacturing

This paper deals with the asymptotic optimality of a stochastic dynamic system driven by a singularly perturbed Markov chain with finite state space. The states of the Markov chain belong to several groups such that transitions among the states within each group occur much more frequently than transitions among the states in different groups. Aggregating the states of the Markov chain leads to a limit control problem, which is obtained by replacing the states in each group by the corresponding average distribution. The limit control problem is simpler to solve as compared with the original one. A nearly-optimal solution for the original problem is constructed by using the optimal solution to the limit problem. To demonstrate, the suggested approach of asymptotic optimal control is applied to examples of manufacturing systems of production planning.