A new synthesis of dienone lactones using a combination of hypervalent iodine(III) reagent and heteropoly acid

The oxidation of non-phenolic alkanoic acid derivatives to oxygen heterocycles was investigated; a new oxidative route to dienone lactones has been developed using a combination of hypervalent iodine(III) reagent, phenyliodine(III) bis(trifluoroacetate)(PIFA), and heteropoly acid (HPA).     

Oxidation of BINOLs by Hypervalent Iodine Reagents: Facile Synthesis of Xanthenes and Lactones

Xanthene derivatives have broad applications in medicines, fluorescent probes, dyes, food additives, etc. Therefore, much attention was focused on developing the synthetic methods to prepare these compounds. Binaphthyl-based xanthene derivatives were prepared through the oxidation of BINOLs promoted by the hypervalent iodine reagent iodosylbenzene (PhIO). Nine-membered lactones were obtained through a similar oxidative reaction when iodoxybenzene (PhIO₂) was used. Additionally, one-pot reactions of BINOLs, PhIO and nucleophiles such as alcohols and amines were also investigated to provide alkoxylated products and amides in good to excellent yields.     

Facile syntheses of allylic allenethiosulfinates and -sulfonates, and of beta-iodo alpha,beta-unsaturated gamma-sultines

The regiospecificity of the 1,4-addition of the recently reported novel alkoxy chlorodisulfides to 2-methyl-1,3-butadiene has been established. Allyl allenethiosulfinates formed by spontaneous [2,3]-sigmatropic rearrangement of the addition products were oxidized at 4 degrees C to the corresponding thiosulfonates. Periodate oxidation at room temperature, preferably in the presence of I2, resulted in oxidative cleavage and cyclization to beta-iodo alpha,beta-unsaturated gamma-sultines. Such sultines, with varying degrees of gamma-alkyl substitution, were also conveniently prepared by reaction of iodine with alkyl allenesulfinates.     

Design, synthesis, and characterization of a series of cytochrome P(450) 3A-activated prodrugs (HepDirect prodrugs) useful for targeting phosph(on)ate-based drugs to the liver

A new class of phosphate and phosphonate prodrugs, called HepDirect prodrugs, is described that combines properties of rapid liver cleavage with high plasma and tissue stability to achieve increased drug levels in the liver. The prodrugs are substituted cyclic 1,3-propanyl esters designed to undergo an oxidative cleavage reaction catalyzed by a cytochrome P(450) (CYP) expressed predominantly in the liver. Reported herein is the discovery of a prodrug series containing an aryl substituent at C4 and its use for the delivery of nucleoside-based drugs to the liver. Prodrugs of 5'-monophosphates of vidarabine, lamivudine (3TC), and cytarabine as well as the phosphonic acid adefovir were shown to cleave following exposure to liver homogenates and exhibit good stability in blood and other tissues. Prodrug cleavage required the presence of the aryl group in the cis-configuration, but was relatively independent of the nucleoside and absolute stereochemistry at C4. Mechanistic studies suggested that prodrug cleavage proceeded via an initial CYP3A-catalyzed oxidation to an intermediate ring-opened monoacid, which subsequently was converted to the phosph(on)ate and an aryl vinyl ketone by a beta-elimination reaction. Studies in primary rat hepatocytes and normal rats comparing 3TC and the corresponding HepDirect prodrug demonstrated the ability of these prodrugs to effectively bypass the rate-limiting nucleoside kinase step and produce higher levels of the biologically active nucleoside triphosphate.     

The effects of oxidative reaction on ionic permeabilities through polypeptide membranes containing –SH groups in the side chains

The effects of the oxidative reaction on the ionic permeabilities through polypeptide membranes containing thiol groups in the side chains were investigated. Membranes were derived from poly(glutamyl-cysteine) (PGC) containing 12% (in mol %) of ? SH groups in the side chains, and from poly(L-cysteine) (PlCys) containing 26% of thiol groups in the side chains, respectively. On the basis of the polarographic analysis, it can be estimated that more than 80% of ? SH groups in the membranes could be oxidized by using 10 mM solution of iodine. The membrane potentials across the PGC membrane were increased by the iodine oxidation, indicating that ? SH groups of PGC were converted to highly dissociable groups, i.e., sulfonic acid derivatives. The decrease in the ionic permeabilities through the PGC membrane by the oxidation, therefore, was attributed to the decrease in ionic solubility into the membrane owing to the increase in fixed charge density of the membrane (Donnan exclusion effect). On the other hand, no influence of the oxidation on the membrane potentials of the PCys membrane suggests the possibility of oxidative S-S cross linking in the membrane. The oxidation-induced permeability decrease of the PCys membrane could be explained in terms of the decrease in ionic diffusibility associated with the formation of the side chain cross linkings between ? SH groups in the membrane.     

Mechanistic aspects of alkene oxidation using chiral hypervalent iodine reagents

Recent progress in the area of hypervalent iodine-induced enantioselective oxidation is reviewed with emphasis from a mechanistic point of view. Chiral lactate and lactamide sidechains in hypervalent iodine reagents induce herical chirality around the iodine reaction site, which provides a chiral environment suitable for enantioselective transformations. The stereochemical outcomes of alkene oxidation are also compiled and used for systematically understanding the reaction mechanism of oxidative double bond difunctionalization.     

N-Heterocycle (tetrazole)-stabilized pseudocyclic λ3-iodane: Synthesis and reactivity

An N-heterocycle (tetrazole)-stabilized pseudocyclic λ³-iodane was synthesized and its thermal stability and redox activity were studied. Simultaneous thermogravimetric analysis and differential scanning calorimetry revealed that the polyvalent iodine compound started to degrade at 127 °C and showed a notable exothermic decomposition peak at 147 °C, which was markedly more pronounced than the parent tetrazole with monovalent iodine. The reduction potential was determined by cyclic voltammetry to be ?0.38 V vs AgNO₃|Ag in dimethyl sulfoxide at a scan rate of 0.02 V/s. The oxidative power of the polyvalent iodine compound was demonstrated by conducting oxidation of thioanisole to sulfoxide and oxidative dimerization of thiobenzamide to 3,5-diphenyl-1,2,4-thiadiazole.     

Speciation of iodide, iodine, and iodate in environmental matrixes by inductively coupled plasma atomic emission spectrometry using in situ chemical manipulation

Dissolved iodine, iodide, and iodate are determined in environmental matrixes by in situ chemical manipulation and inductively coupled plasma atomic emission spectrometry (ICPAES). The method uses equipment commonly available to most laboratories involved in environmental inorganic analysis. Total dissolved iodine, iodide, and iodate are determined by ICPAES using iodine vapor generation. Total iodine is determined directly by ICPAES after filtration. Total dissolved iodide (I-) is oxidized in situ to iodine by the addition of sodium nitrite in sulfuric acid in a simplified continuous flow manifold. Iodate is determined by prereduction at the instrument before analysis by the in situ oxidation ICPAES procedure. A standard nebulizer produces the gas-liquid separation of the total iodine, which is then quantified by ICPAES at 206.16 nm. The instrument detection limit for the iodine analysis was 0.04 microgram/mL. Recoveries from seawater, saltwater, and freshwater standard reference materials ranged from 85 to 118% and averaged 98%. For samples containing both iodine and iodide, the total is determined with in situ oxidation, iodine is determined without the oxidizing reagents, and iodine is calculated from the difference. For samples containing all 3 species, pre-reduction is used and the iodine and iodide concentrations are subtracted for quantitation of iodate. The analysis is selective for these 3 species (I-, I2, and IO3). A group of 20-30 samples may be analyzed and quantitated for all 3 individual, commonly occurring iodide species in less than 1 h. The procedure is considerably faster than any other reported techniques. This method is especially well-suited to the analysis of small environmental samples.     

Synthesis of oxacalothrixin B and its analogues involving iodine/TBHP-mediated electrocyclization

The total synthesis of oxacalothrixins, an isostere of biologically important carbazoloquinone alkaloid, calothrixin B was achieved from 2-acetyl-3-methylbenzofuran. An iodine/TBHP-mediated oxidative cyclization of benzofuranyl-enamine has been employed as a key step to synthesize, the crucial intermediate 1-hydroxy dibenzofurancarbaldehyde. The latter upon reductive cyclization followed by PIDA-mediated oxidation furnished oxacalothrixin B and its analogues.     

Macrocycles,derivatives of nitrogen-containing heterocycles 2. Synthesis and electrochemical properties of diindolizinadiquinoxalinacyclooxaalkaphanes

Phenylindolizinylquinoxalinomonopodands, obtained by the reaction of 1-(phenylindolizin-2-yl)quinoxalin-2(1H)-one with corresponding dibromotrioxa- and dibromopentaoxaalkanes, undergo oxidative dehydrocyclization assisted by molecular iodine to yield new redox-active diindolizinadiquinoxalinacyclooxaalkaphanes. Using CVA, the indolizine fragments of the heterocyclophanes in acetonitrile are found to undergo three-step oxidation with transfer of one electron in each step. The first and the third steps are reversible, whereas the second is irreversible. The oxidation at potentials of the first peak leads to the stable radical cations registered by ESR (g = 2.0024, a _2N = 0.26 mT).     

Reactions of hypervalent iodine reagents with palladium: mechanisms and applications in organic synthesis

The unique reactivity of hypervalent iodine reagents with Pd0 and PdII complexes has been exploited for a variety of synthetically useful organic transformations. For example, IIII reagents have been used in place of aryl halides for diverse Pd-catalyzed C-C and C-heteroatom bond-forming cross-coupling reactions. In addition, these reagents have found application in Pd-catalyzed oxidation reactions, including the oxidative functionalization of C-H bonds and the 1,2-aminooxygenation of olefinic substrates. This review discusses both the synthetic utility and the interesting mechanistic features of these transformations.     

Ring-disk electrode studies of the formation,growth and transformation of iodine films formed during the anodic oxidation of iodide on platinum

The kinetics and mechanism of the formation, growth and dissolution of iodine films on platinum during the electrooxidation of iodide have been investigated using rotating-disk and ring-disk techniques. The dissolution-precipitation mechanism of film formation and a linear growth law for film growth has been confirmed. The iodine film on platinum is believed to be made up of an ionically insulating barrier layer covered by a porous overlayer. The oxidation behavior of iodide and ferrous species shows that the iodine film is predominantly an iodide-ion conductor. Also, a film transformation, responsible for the transient features observed during iodide oxidation has been confirmed. This transformation changes the mechanism of iodide transport through the film from a partly “pore”-type to a Grotthus-type mechanism. The ring current maximum, which occurs at the same instant as the disk current minimum, reveals the mechanism of dissolution of iodine film during the transient period as involving complexation with iodide. Evidence for the mass-transport-controlled component of the potentiostatic transient response has been obtained from the sinusoidal hydrodynamic modulation response.     

Metal-free one-pot oxidative amidation of aldoses with functionalized amines

Metal-free one-pot oxidative amidation of aldoses with functionalized amines using iodine provides a rapid access to functionalized aldonamides. The main advantage of this approach relies on the fact that aldehyde oxidation and C-N bond formation are performed in a single synthetic operation.     

Continuous‐Flow Electrochemical Generator of Hypervalent Iodine Reagents: Synthetic Applications

An efficient and reliable electrochemical generator of hypervalent iodine reagents has been developed. In the anodic oxidation of iodoarenes to hypervalent iodine reagents under flow conditions, the use of electricity replaces hazardous and costly chemical oxidants. Unstable hypervalent iodine reagents can be prepared easily and coupled with different substrates to achieve oxidative transformations in high yields. The unstable, electrochemically generated reagents can also easily be transformed into classic bench‐stable hypervalent iodine reagents through ligand exchange. The combination of electrochemical and flow‐chemistry advantages largely improves the ecological footprint of the overall process compared to conventional approaches.     

Dry deposition of elemental iodine on skin,hair, and clothing from air

Hairless rats, clothes, human hair, filter paper and water were exposed to gaseous elemental iodine in a glass chamber for 60–120 minutes. The deposition of gaseous elemental iodine on skin and lung of rats, human hair, water, clothes and paper were investigated by measuring iodine content in the exposed material by epithermal neutron activation analysis (ENAA). For measurement of the iodine concentration in the chamber air, elemental iodine in the air was collected by continuously sucking air through an active charcoal column. The trapped iodine in the active charcoal was then determined by ENAA. The measured deposition velocity in the test chamber of gaseous elemental iodine on skin, clothing, hair and water ranges from 0.006 on filter paper and water to about 0.05 cm/s on skin and clothes. The variation of elemental iodine concentration in air of the glass chamber was investigated by collecting and analyzing air samples at various time intervals. The results show that the variation with time in the concentration of the iodine can be described by an exponential function.     

酸性介质中碘离子在铂电极上的电化学氧化行为

采用循环伏安法研究了酸性介质中碘离子在铂电极上不同电位区间, 不同酸度下的电化学反应行为. 结果表明, 当极化电位较低(小于0.6 V(vs Hg/Hg2SO4))时, 碘离子在铂电极上发生2I--2e→I2电氧化反应, 反应产物通过I2+I-=I-3被进一步溶解, 整个反应属于E-C(electrochemical-chemical)模式. 电氧化过程中可以形成碘膜, 其也可以被碘离子溶解. 当极化电位升高至0.6 V(vs Hg/Hg2SO4)或以上时, 碘离子会直接电氧化为高价态碘化合物, I-+3H2O→IO-3+6H++6e, 而析出的碘膜并不发生再氧化反应; 在电化学还原过程中, 出现了两个还原峰, 分别对应于I2、I-3的还原反应; 在无碘膜时, 碘离子电氧化过程受溶液中碘离子的液相扩散步骤控制; 碘膜形成后, 主要受碘膜中碘离子的固相扩散控制; 酸度对于碘离子的电化学氧化过程有很大的影响, 其线性极化曲线的起峰电位及电流峰值电位均随酸浓度升高而负移.     

Microdetermination of some xylenols via investigation of their catalyzed reactions with iodine

The oxidation of some xylenols with iodine in aqueous ethanolic solutions in the presence of silver ions as a catalyst was investigated and used for microdetermination of these reductants. The study of these redox reactions and the microdetermination of these phenols were performed by volumetric and spectrophotometric methods. These methods were compared. The spectrophotometric method was more accurate at very low concentrations (60–488 μg). The volumetric methods used silver ions as catalyst. The potentiometric method is more accurate than the visual method. Possible schemes for the course of these redox reactions were suggested. One electron processes for oxidation of xylenols have been indicated.     

三价碘试剂促进的氧化反应研究进展

三价碘试剂的反应性能类似于过渡金属如汞、钛和铅,并且具有环境友好、价值低廉、反应条件温和、反应后处理简单和商业可利用的特点,因此在有机合成中得到广泛应用,特别是作为一种高效的选择性氧化试剂,受到广大有机化学工作者的亲睐。本文就三价碘试剂促进的氧化反应,从醇的氧化、羰基化合物的氧化官能团化到氧化硒化和铋化等14类反应进行了简单的综述。     

Pharmaceutical analysis of some tranquillizers and antidepressants with iodine monochloride

A titrimetric method for the evaluation of some tranquillizers and antidepressants is proposed. The method is based on the oxidation of these drugs by iodine monochloride, in strong acid medium, the iodine liberated being titrated with potassium iodate by the Andrews method. The proposed method is applied successfully for the determination of 9 phenothiazines, 1 thioxanthene, 2 acid hydrazides and 1 dibenzazepine containing a double bond (Opipramol). Tablets, solutions for injection, and drops are also determined by the proposed method. The mechanism of oxidation for each species is suggested and the results obtained agree with these suggestions. Some official and non-official methods for the evaluation of the drugs have been compared with the iodine monochloride method, which is found to be superior in specificity, sensitivity and speed.     

Oxidative hydroxylation of phosphine in aqueous alcohol solutions of p-benzoquinone

The oxidation of phosphine in aqueous alcohol solution of benzoquinone in the presence of iodide ions is studied. Kinetic measurements, redox potentiometry, and gas chromatography are used to determine the kinetic regularities of the oxidative hydroxylation of phosphine, and a single-stage redox mechanism is proposed for this reaction. It is found that the iodine resulting from the oxidation of I^? ions by quinone is the reagent responsible for the formation of phosphorus-containing products.