Calculation of acoustic scattering of a nonrigid surface using physical acoustic method

In this paper the physical acoustic method or the Kirchhoff approxima-tion is extended to treat the scattering of a nonrigid surface in order to estimatethe target strength of targets with absorbing coatings.By using the locally planewave approximation,the relationship between the sound pressure and its normalderivative on the surface can be represented by the plane wave reflectioncoefficient and the acoustic impedance of the surface.The resulting modifiedKirchhoff approximation involves the plane wave reflection coefficient.For aimpedance sphere,a comparison between the physical acoustic method and theexact solution shows that the physical acoustic method still is a good approxima-tion at higher κα values.     

Torsional waves excited by electromagnetic–acoustic transducers during guided-wave acoustic inspection of pipelines

A theory of propagation of torsional waves excited by an electromagnetic–acoustic transducer in a pipe is proposed. This theory takes into account the excitation parameters, geometry, viscosity, and the elastic characteristics of an object. The main testing parameters (the frequency and geometry of the transducer) that determine the possibilities of guided-wave testing of pipelines of various dimensions using torsional waves are theoretically substantiated.     

Melting curve of copper measured to 16 GPa using a multi-anvil press

The melting temperature, T _m, of copper has been determined from ambient pressure to 16 GPa using multi-anvil techniques. The melting curve obtained (T _m=1355(5)+44.5(31)P?0.61(21)P ², with T _m in Kelvin and P in GPa) is in good agreement with both the previous experimental studies and with recent ab initio calculations.     

High pressure synthesis at 10 GPa and 1400 K using a small cubic anvil apparatus with a multi-anvil 6-6 system

In the present study, high pressure synthesis up to 10 GPa was done using a small cubic anvil apparatus (W45×D52×H92 cm³, load capacity of 1.80 MN) with a multi-anvil 6-6 system. Its performance was demonstrated by synthesizing a ferromagnetic perovskite oxide, CaCu₃Fe₄O₁₂, at pressure–temperature conditions of 10 GPa and 1400 K. The synthesized CaCu₃Fe₄O₁₂ perovskite was ～1 mm in diameter and ～2 mm in height and its size was large enough for performing magnetic susceptibility measurements at 5–300 K using a superconducting quantum interference device magnetometer and phase identification by X-ray diffraction. The experimental system developed in the present study has many advantages when used in high pressure synthesis experiments, and the technical development of a small cubic anvil apparatus will greatly contribute to the advancement of high pressure synthesis of novel materials.     

Modulational instability of ion—acoustic waves in a warm plasma

Using the standard reductive perturbation technique,a nonlinear Schroedinger equation is derived to study the modulational instability of finite-amplitude ion-acoustic waves in a non-magnetized warm plasma.It is found that the inclusion of ion temperature in the equation modifies the nature of the ion-acoustic wave stability and the soliton stuctures.The effects of ion plasma temperature on the modulational stability and ion-acoustic wave properties are inestigated in detail.     

Leak location in gas pipelines using cross-time–frequency spectrum of leakage-induced acoustic vibrations

The correlation-based location methods are widely used in leak detection of the pipelines assuming that the acoustic speed has been known and constant. In practice, the acoustic speed is frequency-varying due to the dispersions of gas-leak-induced acoustic waves, and thus the assumption is not supported. In this work, a location scheme based on cross-time–frequency spectrum (CTFS) is intended for the gas-leak-induced acoustic waves with frequency-varying acoustic speed. In the scheme, the CTFS is obtained by the one-dimensional Fourier transform of the time domain convolution between the kernel function in correlation domain and the instantaneous cross-correlation of the two spatially separately collected acoustic signals on either sides of a leakage. Then, the time difference of arrival (TDOA) and the corresponding frequency information are extracted simultaneously when the CTFS reaches the maximum value. The resulting peak frequency is used to online determine the frequency-dependant acoustic speed in combination with the known dispersive curve of gas-leak-induced dominated mode. Finally, the gas leakage is located by the TDOA and the frequency-dependant acoustic speed of real-time determination instead of constant acoustic speed. Consequently, for the proposed scheme, the constant acoustic speed is no longer a prerequisite. The proposed scheme has been experimentally validated in leak detection of gas pipelines and results demonstrate that the average relative location errors are reduced by six times compared with the commonly used correlation-based location method.     

Zigzag instability of a χ disclination line in a cholesteric liquid crystal

We studied the formation of χ disclination lines in planar cholesteric samples placed in a temperature gradient near the cholesteric to smectic A phase transition. We observed that the first simple line which forms close to the smectic-cholesteric front zigzags when it is perpendicular to the direction of planar anchoring and is straight for other orientations. This instability is similar to Herring instability for crystalline surfaces. We show numerically that it originates from a strong increase of the elastic anisotropy close to the transition. In addition, we propose a new method to measure the pitch divergence at the smectic to cholesteric phase transition.     

Near field acoustic solution of a rotating point source in frequency domain

I.IntroductionAerodyntalcnoiseofturbomaChinrynotoalythectstheenvironmentbutalsosometimesresultsinstructuredamage.Aeroacoustics,asaintewhsciPlineofacousticsandaerodynamics,isattractingmorandmoreatteDtionandresearch.TherearetwoimportalltcontentsonthenoiseproducingmechAnsmsinaeroacousticproblem.OneisaboutthesourcesofnoiseinturbomachinryGenetallytherearethreetyPesofsources:thickness,forceandturbulencestress,correspondingrespectivelyTomonopole,dipoleandquadruplesourcesThelatertwokindsofsourcesh…     

Analysis of the interface configuration and flow characteristics in tanks in a multiphase liquid–gas system using numerical simulation

A multiphase study was conducted using a turbulence model of large eddy simulation to investigate the interaction between the gaseous phase and the interface and its respective behaviour until the liquid phase movement was established, first in the near interface, as well as the presence of turbulent structures in the study of transport between phases. The results are shown for three surface configurations: a surface with waves in which the Reynolds number and friction velocity of the gaseous phase are, respectively, 210 and 0.25 m/s; a surface with small undulations, 86 and 0.10 m/s; and a flat surface, 43 and 0.05 m/s. Coherent structures are detected on both sides of the interface; these are intensified and less elongated for larger Reynolds numbers. Additionally, the interface exhibits distinct behaviour with regard to the examined phases. For the gaseous phase, it behaves like a no-slip surface.     

Determination of the vapor–liquid transition of square-well particles using a novel generalized-canonical-ensemble-based method

The square-well(SW) potential is one of the simplest pair potential models and its phase behavior has been clearly revealed, therefore it has become a benchmark for checking new theories or numerical methods. We introduce the generalized canonical ensemble(GCE) into the isobaric replica exchange Monte Carlo(REMC) algorithm to form a novel isobaric GCE-REMC method, and apply it to the study of vapor–liquid transition of SW particles. It is validated that this method can reproduce the vapor–liquid diagram of SW particles by comparing the estimated vapor–liquid binodals and the critical point with those from the literature. The notable advantage of this method is that the unstable vapor–liquid coexisting states,which cannot be detected using conventional sampling techniques, are accessed with a high sampling efficiency. Besides,the isobaric GCE-REMC method can visit all the possible states, including stable, metastable or unstable states during the phase transition over a wide pressure range, providing an effective pathway to understand complex phase transitions during the nucleation or crystallization process in physical or biological systems.     

Spectroscopy of thermally excited acoustic modes using three-mode opto-acoustic interactions in a thermally tuned Fabry–Pérot cavity

Three-mode opto-acoustic interactions can excite acoustic modes of the mirrors of an optical cavity. This was achieved when the frequency difference between the fundamental and higher order optical mode matches the frequency of appropriate acoustic mode of the mirror. The excitation also critically depends on the spatial overlap between acoustic and optical modes. In this Letter, we use a controlled CO₂ laser to thermally change the radius of curvature of one mirror of an 80 m Fabry–Pérot cavity for three-mode interaction. Several acoustic modes of the cavity end mirror were observed with quality factors of ∼10⁵–10⁶$\sim {10}^5\text{–}{10}^6$ at the thermal noise level.     

Energy calibration of a BC501A liquid scintillator using a γ-γ coincidence technique

An accurate energy calibration of a BC501A liquid scintillator by means of Compton scattering of γ-rays is described.The energy resolution and the position of the Compton edge have been precisely determined using a γ-γ coincidence technique and fitting the coincidence spectrum with a Gaussian function superimposed on a quadratic polynomial for the background.The position of the Compton edge relative to the position of the maximum and the half height of the distribution in dependence on the relevant energy resolution is discussed in detail.The results indicate that the maximum energy of the recoil Compton electron does not occur at the half height distribution but at 0.90±0.05 of the maximum height in the energy range considered.The energy resolution varies from 15.6% to 8.02% for electrons in the energy region from 0.5 MeV to 3 MeV.     

Energy calibration of a BC501A liquid scintillator using a γ-γ coincidence technique

An accurate energy calibration of a BC501A liquid scintillator by means of Compton scattering of γ-rays is described.The energy resolution and the position of the Compton edge have been precisely determined using a γ-γ coincidence technique and fitting the coincidence spectrum with a Gaussian function superimposed on a quadratic polynomial for the background.The position of the Compton edge relative to the position of the maximum and the half height of the distribution in dependence on the relevant energy resolution is discussed in detail.The results indicate that the maximum energy of the recoil Compton electron does not occur at the half height distribution but at 0.90±0.05 of the maximum height in the energy range considered.The energy resolution varies from 15.6% to 8.02% for electrons in the energy region from 0.5 MeV to 3 MeV.     

Detection of number of sources and DOA estimation based on the combined information processing of pressure and particle velocity using acoustic vector sensor array

In order to solve the problem of DOA(direction of arrival)estimation of underwater remote targets,a novel subspace-decomposition method based on the cross covariance matrix of the pressure and the particle velocity of acoustic vector sensor arrays(AVSA)was proposed. Whereafter,using spatio-temporal virtual tapped-delay-line,a new eigenvector-based criteria of detection of number of sources and of subspace partition is also presented.The theoretical analysis shows that the new source detection and direction finding method is different from existing AVSA based DOA estimation methods using particle velocity information of acoustic vector sensor(AVS)as an independent array element.It is entirely based on the combined information processing of pressure and particle velocity,has better estimation performance than existing methods in isotropic noise field.Computer simulations with data from lake trials demonstrate,the proposed method is effective and obviously outperforms existing methods in resolution and accuracy in the case of low signal-to-noise ratio(SNR).     

Ultrafast α-like relaxation of a fragile glass-forming liquid measured using two-dimensional infrared spectroscopy

Ultrafast two-dimensional infrared (2D-IR) spectroscopy is used to study the picosecond dynamics of a vibrational probe molecule dissolved in a fragile glass former. The spectral dynamics are observed as the system is cooled to within a few degrees of the glass transition temperature (T(g)). We observe nonexponential relaxation of the frequency-frequency correlation function, similar to what has been reported for other dynamical correlation functions. In addition, we see evidence for α-like relaxation, typically associated with long-time, cooperative molecular motion, on the ultrafast time scale. The data suggests that the spectral dynamics are sensitive to cooperative motion occurring on time scales that are necessarily longer than the observation time.     

Detection of a longitudinal defect in a pipe based on guided circumferential waves techniques

Based on elasticity theory, the multi-modes and disperse characteristics of guided circumferential waves in a pipe were investigated theoretically and experimentally, the disperse curves of guided circumferential waves were gotten by numerical calculations. The relationships between the angle of beam transducer, frequency and guided circumferential modes were analyzed by our guided wave experiment system. Then single guided circumferential mode was excited in the pipe (O.D 88.8 mm, I.D 80.8 mm). An artificial longitudinal defect (25×1×0.7 mm) on the surface of the pipe was detected by use of the single guided circumferential wave. The results show that single guided circumferential mode can be excited in the pipe by choosing special frequency and special angle beam transducer, similar to the excitation of Lamb wave in a plate, and it can be used to find the longitudinal defect on a pipe surface.     

Manifestation of spinodal singularities in the liquid–vapor phase transition during simulation of nanosecond vaporization of a liquid film

The recent results of molecular-dynamics simulation of nanosecond vaporization of a thin liquid film are analyzed within the continual approach. The analysis shows a significant increase in the thermal conductivity at the film temperature maximum before its explosive decomposition, which indicates the closeness of the achievable limiting overheating temperature to the spinodal.     

Modulational instability of a weakly relativistic ion acoustic wave in a warm plasma with nonthermal electrons

An investigation has been made of modulational instability of a nonlinear ion acoustic wave in a weakly relativistic warm unmagnetized nonthermal plasma whose constituents are an inertial ion fluid and nonthermally distributed electrons. Up to the second order of the perturbation theory, a nonlinear Schr?dinger type (NST) equation for the complex amplitude of the perturbed ion density is obtained. The coefficients of this equation show that the relativistic effect, the finite ion temperature and the nonthermal electrons modify the condition of the modulational stability. The association between the small-wavenumber limit of the NST equation and the oscillatory solution of the Korteweg－de Varies equation, obtained by a reductive perturbation theory, is satisfied.