Multilayer assembly of calf thymus DNA and poly(4-vinylpyridine) derivative bearing [Os(bpy)(2)Cl](2+): redox behavior within DNA film

Polyelectrolyte multilayer (PEM) films containing polycationic osmium (Os) bipyridyl (bpy) complex-attached poly(4-vinylpyridine) (PVP) derivative [Os(bpy)(2)Cl](2+)-PVP (Os-PVP) and polyanionic calf thymus DNA (CT-DNA) on the surface of gold (Au) electrodes were prepared using a layer-by-layer self-assembly method, and their redox properties were studied. Os complex shows different redox behavior with CT-DNA film in comparison with other PEM film which is composed of ordinary polymers. A cyclic voltammetric study suggested that the outermost polyanionic DNA layer does not hinder the redox reaction of Os complex within the Os-PVP/CT-DNA multilayer film, which may be helpful to understand the electron transfer mechanism with the DNA film. For all the Os-complex-containing PEM layers studied, a diffusion-free electron transfer from the Os complex moieties in these films to the electrode surface was observed. An electrocatalytic oxidation of ascorbic acid (AA) by this DNA-containing PEM film-covered electrode was also proposed.     

Ion-Free latex films as dual-phase electrolytes: Styrene–butadiene rubber and nitrile–butadiene rubber synthesized by emulsion polymerization with poly-(vinyl pyrrolidone) stabilizer

Ion-free latices of styrene-butadiene rubber (SBR) and nitrile-butadiene rubber (NBR) were synthesized by emulsion polymerization with use of poly (vinyl pyrrolidone) (PVP) stabilizer. The goal was to prepare ion-free latex films, possessing dual-phase latex particle morphology, and swell the films with liquid electrolyte to yield dual-phase polymer electrolytes (DPE). SBR/PVP latex was prepared readily, but NBR/PVP latex was sensitive to coagulation. Differential scanning calorimetric (DSC) and scanning electron microscopic (SEM) analyses of latex films provided morphological evidence concerning particle structure and phase separation. Blends of NBR/PVP and PB/PVP latices (PB = polybutadiene) were also investigated, but particle structure was not present in the blended latex film, even though particle structure was present in the individual NBR/PVP and PB/PVP latex films. After extensive swelling of SBR/PVP latex films, PVP was extracted from the films, and ionic conductivities greater than 10^?3 S/cm were achieved. © 1994-John Wiley & Sons, Inc.     

Preparation of poly(ether ether ketone)-based polymer electrolytes for fuel cell membranes using grafting technique

Poly(ether ether ketone) (PEEK)-based polymer electrolyte membranes (PEMs) was successfully prepared by radiation grafting of a styrene monomer into PEEK films and the consequent selective sulfonation of the grafting chains in the film state. Using milder sulfonation, the sulfonation reactions proceeded at the grafted chains in preference to the phenylene rings of PEEK main chains; as a result, the grafted films could successfully transform to a PEM with conductivity of more than 0.1 S/cm. The ion exchange capacity (IEC) and conductivity of the grafted PEEK electrolyte membranes were controlled to the ranges of 1.2–2.9 mmol/g and 0.03–0.18 S/cm by changing the grafting degree. It should be noted that this is the first example of directly transforming super-engineering plastic films into a PEM using radiation grafting.     

Peculiarities of polyelectrolyte multilayer assembly on patterned surfaces

The layer-by-layer assembly of poly(diallyldimethylammonium chloride) and poly(sodium 4-styrenesulfonate) is studied on templates with imprinted arrays of microwells ranging from 2 to 25 μm and different aspect ratios. The thickness and microstructure of polyelectrolyte multilayers (PEMs) are measured using scanning electron microscopy. At 0.2 M ionic strength, the PEM film evenly coats the template both inside and outside the microwells. If the film is thinner than the critical value of about 400 nm, PEM microstructures collapse upon dissolving the template. Euler's model of critical stress is used to describe the collapse. At 2 M ionic strength, a substantially thinner PEM film is assembled inside the 25 μm wells than outside. If the well diameter is reduced to 7 and 2 μm, a much thicker PEM film is formed inside the microwells. These observations have been attributed to the changing of polyelectrolyte conformation in the solutions.     

纳米SiO_2/聚丙烯酸酯复合乳液的制备与表征

根据核壳乳液聚合理论,以经过硅烷偶联剂表面改性的纳米SiO2为种子,采用适当的乳液聚合工艺,制备了纳米SiO2/聚丙烯酸酯复合乳液,并表征了其性能.结果表明,纳米SiO2经过改性后,硅烷偶联剂接枝在其表面;以其为种子制备的复合乳液具有核壳结构,其热稳定性有所提高.     

In situ Molecular Self-assembly and Sensitive Label-free Detection of Streptavidin via a Wavelength Interrogated Surface Plasmon Resonance Sensor

The sensing sensitivity of wavelength interrogated surface plasmon resonance（WISPR） biosensor is improved by self-assembly of polyelectrolyte multilayer（PEM） film of poly（allylamine hydrochloride）（PAH）/ poly（sodium-p-styrenesulfonate）（PSS） on the Au film coated glass chip via the layer-by-layer（LBL） technique. The home-made WISPR with Krestchmann configuration consists of a tungsten-halogen lamp as a photon source and a charge coupled device（CCD） camera as the detector. The influence of PEM film thickness on the optical properties of WISPR biosensors was investigated theoretically and experimentally. In order to achieve higher sensing sensitivity, the PEM film thickness has to be designed as ca.14 nm at an Au layer thickness of 50 nm and an incidental angle of 11.8°. Furthermore, the PEM coated WISPR biosensor can serve as highly sensitive biosensor, in which the biotin-streptavidin is used as bioconjugate pair. After deposition of the PEM film of （biotin/PAH）（PSS/PAH）3, the modified WISPR biosensor is more sensitive to the low concentration（〈0.01 mg/mL） of streptavidin. And the sensing sensitivity can be further increased by one order of magnitude compared with that of the biotin/PAH coated WISPR biosensor. Thus, such low-cost, high-performance and efficient PEM-coated WISPR biosensors have great potentials in a diverse array of fields such as medical diagnostics, drug screening, food safety analysis, environmental monitoring, and homeland security.     

A comparative physical study of two different hydrophilic synthetic latex matrices for the construction of a glucose biosensor

Two different biodegradable latex polymers functionalised by hydroxy (1) or gluconamide (2) groups proved to be good immobilisation matrixes for glucose oxidase. The responses of these biosensors to glucose additions were measured by potentiostating the modified electrodes at 0.6 V/SCE in order to oxidise the hydrogen peroxide generated by the enzymatic oxidation of glucose in the presence of oxygen. The response of such electrodes was evaluated as a function of film thickness, pH and temperature. Rotating disk electrode experiments showed the influence of the enzyme on the structure of both latex films, namely a marked improvement in matrix permeability. The high permeability of the latex 1 based enzyme sensor (bilayer, P(m)=8.10x10(-4) cm s(-1)) resulted in a high dynamic range. Furthermore, the activation energy for a latex 1 sensor was determined to be 44.55 and 18.03 kJ mol(-1), respectively depending on the conformation of the enzyme.     

Photoresponsive ion gating function of an azobenzene polyelectrolyte multilayer spin-self-assembled on a nanoporous support

The fabrication of a polyelectrolyte multilayer (PEM) on a porous membrane was successfully improved by using spin-coating electrostatic self-assembly. Surprisingly, the quality of the PEM film obtained on the nanoporous alumina substrate (i.e., its thickness and surface morphology) was comparable to that of a film deposited on silicon. An optical molecular switch that acts as an ion-gating channel was realized using a PEM membrane deposited layer-by-layer on an alumina support. One of the layer components of this device was a poly(acrylamide) copolymer containing an azobenzene chromophore, which is known to reveal strong voluminous expansion and contraction during light-induced reversible cis/trans isomerizations. The permeability of the bulk SO4(2-) ions was found to be sensitive to the changed channel sizes; for instance, the ion-permeation rate of SO4(2-) increased about 1.6 times after UV irradiation of the PEM, whereas that of the Cl- ion increased only 1.2 times. In the study, it was successfully demonstrated that the ion flow through the PEM membrane could be reversibly switched on and off over several azobenzene isomerization cycles.     

碳纸对燃料电池自增湿性能的影响

使用TGP-H-028(0.28mm),TGP-H-060(0.19mm),TGP-H-030(0.11mm)等3种Toray碳纸制备膜电极,将组装燃料电池进行极化曲线与交流阻抗分析发现,厚碳纸TGP-H-028对自增湿发电性能略为有利,其最大功率密度比TGP-H-030薄碳纸高0.05W/cm²左右;用聚四氟乙烯乳液疏水处理TorayTGP-H-060碳纸,制备的MEA的自增湿电性能随着聚四氟乙烯质量分数(20%～40%)的升高而增大,最大功率密度升高至0.25W/cm²左右.当聚四氟乙烯质量分数继续升高到60%时,电性能开始下降,并比质量分数为40%的聚四氟乙烯的电性能低.     

Film formation from pure and mixed latices; transient fluorescence study

A fast transient fluorescence technique was used to study latex film formation induced by organic solvent vapor. Mixtures of pyrene (P)- and naphthalene (N)-labeled and/or pure naphthalene-labeled latex films were prepared separately from poly(methyl methacrylate) (PMMA) particles. Then these pure and mixed latex films were exposed to vapor of various chloroform-heptane mixtures in seven different experiments. In both films, fluorescence lifetimes from N were monitored during vapor-induced film formation. It was observed that N lifetimes decreased as the vapor exposure time is increased. A Stern-Volmer kinetic analysis was used for low quenching efficiencies to interpret the decrease in N lifetimes. A Prager-Tirrell model was employed to obtain back-and-forth frequencies, nu, of reptating PMMA chains during latex film formation induced by solvent vapor. In both pure and mixed latex films, nu values were found to be correlated with the chloroform content in the vapor mixture. It was observed that polymer interdiffusion obeyed a t1/2 law during film formation.     

Surface self-segregation, wettability, and adsorption behavior of core-shell and pentablock fluorosilicone acrylate copolymers

The surfaces of films cast from core-shell fluorosilicone acrylate copolymer (BA/MMA/DFHM and BA/MMA/DFHM/MPTMS/D(4)) latexes and linear pentablock fluorosilicone acrylate copolymer (PDMS-b-(PMMA-b-PDFHM)(2)) solutions are intensively investigated and compared by XPS, DCA, AFM, and QCM-D measurements. It is found that the molecular structures and in-solution aggregate structures of these well-defined copolymers have a dramatic influence on the surface structure formation, surface wetting, and adsorption behavior. The PDMS-b-(PMMA-b-PDFHM)(2) film cast from chloroform solution with high concentration of low-density unimers is able to perform as strong surface self-segregation of fluorine-containing groups as core-shell copolymer latex films. The BA/MMA/DFHM/MPTMS/D(4) in the core-shell latex particles exhibits the less pronounced surface self-segregation of silicon-containing groups than PDMS-b-(PMMA-b-PDFHM)(2) due to the occurrence of cross-linking reactions between polysiloxane chains. Indeed, such reactions induce the formation of silica network within the film material, which immobilizes tightly the fluorinated groups on the film surface and thus endows the film with higher surface structural stability for water compared to PDMS-b-(PMMA-b-PDFHM)(2) film with similar surface fluorine concentration and even higher silicon concentration. Still, the PDMS-b-(PMMA-b-PDFHM)(2) film definitely demonstrates higher advancing and receding contact angles for water than BA/MMA/DFHM/MPTMS/D(4) latex film in the case of synergism between surface enrichment of fluorine and silicon.     

Preparation and Characterization of Chitosan-Coated DBD Plasma-Treated Natural Rubber Latex Medical Surgical Gloves with Antibacterial Activities

The natural rubber latex (NRL) film taken from medical surgical gloves was surface-modified with a dielectric barrier discharge (DBD) plasma treatment under an air environment. The results showed that surface hydrophilicity of the NRL film increased after the plasma treatment due to the presence of oxygen-containing polar groups on the plasma-treated surface. An increase in plasma treatment time increased the surface roughness of the NRL film, and eventually decreased the mechanical properties. From the obtained results, the optimum plasma treatment time of 20?s was chosen. After immersion in a chitosan solution, the amount of chitosan deposited on the plasma-treated NRL film increased with increasing chitosan concentrations. The chitosan coating smoothed the surface of the plasma-treated NRL film and also improved the mechanical properties. The highest antibacterial activities of the chitosan-coated DBD plasma-treated NRL film against both Staphylococcus aureus and Escherichia coli were achieved when a 2?%(w/v) chitosan solution was used for the coating.     

Synthesis and characterization of emulsifier-free trilayer core–shell polysilsesquioxane/polyacrylate/poly(fluorinated acrylate) hybrid latex particles

The trilayer core–shell polysilsesquioxane/polyacrylate/poly(fluorinated acrylate) (PSQ/PA/PFA) hybrid latex particles are successfully prepared, using functional PSQ latex particles with reactive methacryloxypropyl groups synthesized by the hydrolysis and polycondensation of (3-methacryloxypropyl)trimethoxysilane in the presence of a reactive emulsifier as seeds. Transmission electron microscopy (TEM), scanning electron microscopy (SEM) and dynamic light scattering (DLS) confirm that the resultant hybrid latex particles have evident trilayer core–shell structure and a narrow size distribution. The Fourier transform infrared (FTIR) spectra show that fluorinated acrylate monomers are effectively involved in the emulsion copolymerization and formed the fluorine-containing hybrid latex particles. XPS analysis of the obtained hybrid latex film reveals that the intensity of fluorine signal in the film–air interface is higher than that in the film–glass interface. In addition, compared with pure polyacrylate latex film, the obtained fluorine-containing hybrid film shows higher hydrophobicity and thermal stability, and lower surface free energy.     

Polymer-metal complexes in polyelectrolyte multilayer films as catalysts for oxidation of toluene

We report on the binding of metal ions (Me(2+); Co(2+) and Cu(2+)) with weak polyelectrolyte multilayers (PEMs), as well as on catalytic activity of PEM-Me(2+) films for oxidation of toluene. Using several types of PEM films constructed using branched polyethyleneimine (BPEI) or quaterinized poly-4-vinylpyridines (QPVPs) as polycations and poly(acrylic acid) (PAA) or poly(styrene sulfonate) (PSS) as polyanions, we found that binding of Co(2+) and Cu(2+) ions with a PEM matrix can occur both through coordination to polycationic amino groups and/or ionic binding to polyacid groups. The amount of metal ions loaded within the film increased linearly with film thickness and was strongly dependent on polyelectrolyte type, film assembly pH, and fraction of permanent charge in polymer chains. Among various PEM-Me(2+) systems, BPEI/PAA-Co(2+) films assembled at pH 8.5 show the best catalytic performance, probably because of the preservation of high mobility of Co(2+) ions coordinated to amino groups of BPEI in these films. With BPEI/PAA-Co(2+) films, we demonstrated that films were highly permeable to reagents and reaction products within hundreds of nanometers of the film bulk; i.e., film catalytic activity increased linearly with layer number up to 30 bilayers and slowed for thicker films.     

Temperature and relative humidity dependency of film formation of polymeric latex dispersions

Thermogravimetric analysis and a synchrotron small-angle X-ray scattering technique were employed to characterize the structural evolution of a polymeric latex dispersion during the first three stages of film formation at different temperatures and relative humidities. Three intermediate stages were identified: (1) stage I*, (2) stage I**, and (3) stage II*. Stage I* is intermediate to the conventionally defined stages I and II, where latex particles began to crystallization. The change of drying temperature affects the location of the onset of ordering, whereas relative humidity does not. Stage I** is where the latex particles with their diffuse shell of counterions in the fcc structure are in contact with each other. The overlapping of these layers results in an acceleration of the lattice shrinkage due to a decrease of effective charges. Stage II* is where the latex particles, dried well above their T(g), are deformed and packed only partially during film formation due to incomplete evaporation of water in the latex film. This is because of a rapid deformation of the soft latex particles at the liquid/air interface so that a certain amount of water is unable to evaporate from the latex film effectively. For a latex dispersion dried at a temperature close to its minimum film formation temperature, the transition between stages II and III can be continuous because the latex particles deform at a much slower rate, providing sufficient surface area for water evaporation.     

Fast transient fluorescence technique (FTRF) for studying vapor-induced latex film formation

A fast transient fluorescence (FTRF) technique was used to study latex film formation induced by organic solvent vapor. Seven different films with the same latex content were prepared separately from poly(methyl methacrylate) (PMMA) particles and exposed to vapor of various chloroform-heptane mixtures in seven different experiments. Latex films were prepared from pyrene (Py)-labeled latex particles and fluorescence lifetimes of Py were monitored during vapor-induced film formation. It was observed that pyrene lifetimes decreased as vapor exposure time increased. A Stern-Volmer kinetic analysis was used for low quenching efficiencies to interpret the decrease in pyrene lifetimes. A Prager-Tirrel model was employed to obtain back-and-forth frequencies, nu, of the reptating PMMA chains during latex film formation induced by solvent vapor. nu values were found to be correlated with chloroform content in vapor mixture. It was observed that polymer interdiffusion obeyed a t(1/2) law during film formation. The results of optical transmission experiments were found to support these findings.     

Site percolation model for latex film formation in soft polymer matrix

The UV-visible (UVV) technique was used to monitor latex film formation in a soft polymer matrix. Various film samples were prepared by increasing the amount of poly(methyl methacrylate) (PMMA) particles in a poly(isobutylene) (PIB) matrix. These samples were then annealed above the glass transition temperature to promote latex film formation. Transmitted photon intensities, Itr, were measured for each film. It is observed that Itr decrease as the latex content is increased, which was explained by the increase in scattered light intensity, Isc. The drastic increase in Isc above a certain latex content is attributed to the site percolation of latex particles in the PIB matrix. The percolation threshold and the critical exponent were measured and found to be 0.3 and 0.4, respectively. The increase in Itr by annealing of film samples above Tg was explained with the void closure process below 0.8 occupation probability. When the film is occupied completely with the latex particles, interdiffusion of polymer chains was observed. Viscous flow and chain diffusion activation energies were determined and found to be 8 and 51 kcal/mol, respectively.     

Dual functional polyelectrolyte multilayer coatings for implants: permanent microbicidal base with controlled release of therapeutic agents

Here we present a new bifunctional layer-by-layer (LbL) construct made by combining a permanent microbicidal polyelectrolyte multilayered (PEM) base film with a hydrolytically degradable PEM top film that offers controlled and localized delivery of therapeutics. Two degradable film architectures are presented: (1) bolus release of an antibiotic (gentamicin) to eradicate initial infection at the implant site, or (2) sustained delivery of an anti-inflammatory drug (diclofenac) to cope with inflammation at the site of implantation due to tissue injury. Each degradable film was built on top of a permanent base film that imparts the implantable device surface with microbicidal functionality that prevents the formation of biofilms. Controlled-delivery of gentamicin was demonstrated over hours and that of diclofenac over days. Both drugs retained their efficacy upon release. The permanent microbicidal base film was biocompatible with A549 epithelial cancer cells and MC3T3-E1 osteoprogenitor cells, while also preventing bacteria attachment from turbid media for the entire duration of the two weeks studied. The microbicidal base film retains its functionality after the biodegradable films have completely degraded. The versatility of these PEM films and their ability to prevent biofilm formation make them attractive as coatings for implantable devices.     

Direct PEM fuel cell using "organic chemical hydrides" with zero-CO2 emission and low-crossover

A series of "organic chemical hydrides" such as cyclohexane, methylcyclohexane, cyclohexene, 2-propanol, and cyclohexanol were applied to the direct PEM fuel cell. High performances of the PEM fuel cell were achieved by using cyclohexane (OCV = 920 mV, PD(max) = 15 mW cm(-2)) and 2-propanol (OCV = 790 mV, PD(max) = 78 mW cm(-2)) as fuels without CO(2) emissions. The rates of fuel crossover for cyclohexane, 2-propanol, and methanol were estimated, and the rates of fuel permeation of cyclohexane and 2-propanol were lower than that of methanol. Water electrolysis and electro-reductive hydrogenation of acetone mediated by PEM were carried out and formation of 2-propanol in cathode side was observed. This system is the first example of a "rechargeable" direct fuel cell.     

Characteristics of polyelectrolyte multilayers: effect of PEI anchoring layer and posttreatment after deposition

The influence of a first (anchoring) layer and film treatment on the structure and properties of polyelectrolyte multilayer (PEM) films obtained from polyallylamine hydrochloride (PAH) and polysodium 4-styrenesulfonate (PSS) was studied. Branched polyethyleneimine (PEI) was used as an anchoring layer. The film thickness was measured by ellipsometry. Complementary X-ray reflectometry and AFM experiments were performed to study the change in the interfacial roughness. We found that the thickness of the PEM films increased linearly with the number of layers and depended on the presence of an anchoring PEI layer. Thicker films were obtained for multilayers having PEI as the first layer comparing to films having the same number of layers but consisting of PAH/PSS only. We investigated the wettability of PEM surfaces using direct image analysis of the shape of sessile water drops. Periodic oscillations in contact angle were observed. PAH-terminated films were more hydrophobic than films with PSS as the outermost layer. The effect of long time conditioning of PEM films in solutions of various pH's or salt (NaCl) concentrations was also examined. Salt or base solutions induced modification in wetting properties of the polyelectrolyte multilayers but had a negligible effect on the film thickness.