Three-dimensional Co2V2O7·nH2O superstructures assembled by nanosheets for electrochemical energy storage

Hierarchical superstructures assembled by nanosheets can effectively prevent aggregation of nanosheets and improve performance in energy storage. Therefore, we proposed a facile hydrothermal method to obtain three-dimensional（3D） superstructure assembled by nanosheets. We found that the ratio of Co²⁺/HMTA affected the morphology of the samples, and the 3D hierarchical structures of are obtained while the ratio of Co²⁺/HMTA is 12:25. The hierarchical structures with sufficie...     

DFT Study on Two C4N12O4 Isomers with Pagodane- and Isopagodane-like Structures

1 INTRODUCTION Pagodane (Fig. 1) first synthesized[1] in 1983 has been studied by Prinzbach and coworkers for more than twenty years[2, 3]. Described as a waxy solid melting without decomposition and stable to at least 600 ℃ in gas phase, pagodane is interesting for its exotic structure and as an introduction to the family of substituted dodecahedranes[2]. Owing to its unu- sual structure, pagodane has provided experimenters and theorists with a challenge to characterize and cal- culate …     

Porous 3‐D scaffolds from regenerated Antheraea pernyi silk fibroin

In this study, porous three‐dimensional (3‐D) materials were prepared with the regenerated Antheraea pernyi (A. pernyi) silk fibroin by freeze‐drying from a lithium thiocyanate solution of its fibers. The relationship between preparation conditions and morphological structures of 3‐D materials was also studied. We concluded that with the decrease in A. pernyi silk fibroin solution concentration and the increase in the freezing temperature, the porosity and the average pore diameter of the 3‐D materials were increased while the pore density was decreased. By adjusting the freezing temperature and the silk fibroin solution concentration, the 3‐D materials having the average pore diameter of 75–260 µm and the porosity of 70–90% can efficiently be produced. As a kind of new material with excellent biocompatibility and bioactivity, the material is expected to be applied to tissue regeneration scaffolds. Copyright © 2007 John Wiley & Sons, Ltd.     

Preparation and characterization of 3D collagen materials with magnetic properties

In this study 3D collagen materials with magnetic properties were prepared by lyophilization technique. Magnetic particles were synthesized by precipitation of iron (II) sulfate heptahydrate and iron (III) chloride hexahydrate in an aqueous solution of chitosan and then added to a collagen solution. Starch dialdehyde (DAS) was used as a cross-linking agent for the materials. The properties of the obtained materials were studied using infrared spectroscopy, scanning electron microscopy (SEM) and transmission electron microscopy (TEM). Additionally, mechanical properties, porosity, density, swelling and moisture content were measured.It was found that 3D composites made from collagen with magnetic particles are hydrophilic with a high swelling ability. Cross-linking of such collagen materials with dialdehyde starch (DAS) alters the swelling degree, porosity and density of materials. The addition of magnetic particles to collagen materials decreases its porosity, and increases the density of the studied materials. Collagen 3D materials with magnetic particles are rigid and inflexible. Magnetic properties of the 3D collagen materials containing magnetic particles were confirmed by the interaction of this material with a magnet.     

Computation of aromatic C3N4 networks and synthesis of the molecular precursor N(C3N3)3Cl6

The successful synthesis and structural characterization of molecules that represent segments of extended solids is a valuable strategy for learning metric and stereochemical characteristics of those solids. This approach has been useful in cases in which the solids are particularly difficult to crystallize and thus their atomic connectivity and overall structures become difficult to deduce with X-ray diffraction techniques. One such class of materials is the covalently linked C(x)N(y) extended solids, where molecular analogues remain largely absent. In particular, structures of C(3)N(4) solids are controversial. This report illustrates the utility of a simple molecule, N(C(3)N(3))(3)Cl(6), in answering the question of whether triazine based C(3)N(4) phases are layered or instead they adopt 3D structures. Here, we present density functional calculations that clearly demonstrate the lower stability of graphitic C(3)N(4) relative to 3D analogues.     

Tunable ferromagnetism in assembled two dimensional triangular graphene nanoflakes

Triangular graphene nanoflakes (TGFs), due to their novel magnetic configurations, can serve as building blocks to design new magnetic materials. Based on spin polarized density functional theory, we show that the two dimensional (2D) structures composed of zigzag-edged TGFs linked by 1,3,5-benzenetriyl units (TGF(N)-C(6)H(3)) are ferromagnetic. Their magnetic moments can be tuned by changing the size and edge termination of TGFs, namely magnetic moments increase linearly with the size of TGFs, and double hydrogenation of the edge carbon atoms can significantly enhance stability of the ferromagnetic states. The dynamic stability of the assembled 2D structures is further confirmed by frequency calculations. The characteristic breathing mode is identified where the frequency changes with the inverse square root of the TGFs width, which can be used to identify the size of TGF(N)-C(6)H(3) in Raman experiments. This study provides new pathways to assemble 2D ferromagnetic carbon materials.     

Progress and Perspectives on Covalent-Organic Frameworks (COFs) and Composites for Various Energy Applications

Covalent-organic frameworks (COFs), being a new member of the crystalline porous materials family, have emerged as important materials for energy storage/conversion/generation devices. They possess high surface areas, ordered micro/mesopores, designable structures and an ability to precisely control electro-active groups in their pores, which broaden their application window. Thanks to their low weight density, long range crystallinity, reticular nature and tunable synthesis approach towards two and three dimensional (2D and 3D) networks, they have been found suitable for a range of challenging electrochemical applications. Our review focuses on the progress made on the design, synthesis and structure of COFs and their composites for various energy applications, such as metal-ion batteries, supercapacitors, water-splitting and solar cells. Additionally, attempts have been made to correlate the structural and mechanistic characteristics of COFs with their applications.     

A review on two-dimensional (2D) and 2D-3D multidimensional perovskite solar cells: Perovskites structures,stability, and photovoltaic performances

Perovskite solar cells (PSCs) fabricated with two-dimensional (2D) halide and 2D-3D mixed-halide materials are remarkable for their optoelectronic properties. The 2D perovskite structures are extremely stable but show limited charge transport and large bandgap for solar cell applications. To overcome these challenges, multidimensional 2D-3D perovskite materials are used to maintain simultaneously, a long-term stability, and high performance. In this review, we discuss the recent progress and the advantages of 2D and 2D-3D perovskite materials as absorber for solar cell applications. First, we discuss the structure and the unique properties of 2D and multidimensional 2D-3D perovskites materials. Second, the stability of 2D and 2D-3D mixed perovskites and the perspects of PSCs are hashed out.     

Laser-ablated violet phosphorus/graphene heterojunction as ultrasensitive ppb-level room-temperature NO sensor

Two dimensional(2D) materials are promising gas sensing materials, but the most of them need to be heated to show promising sensing performance. Sensing structures with high sensing performance at room-temperature are urgent. Here, another 2D material, violet phosphorus(VP) nanoflake is investigated as gas sensing material. The VP nanoflakes have been effectively ablated to have layers of 1–5 layers by laser ablation in glycol. The VP nanoflakes are combined with graphene to form VP/G heterostru...     

Self‐(Un)rolling Biopolymer Microstructures: Rings,Tubules, and Helical Tubules from the Same Material

We have demonstrated the facile formation of reversible and fast self‐rolling biopolymer microstructures from sandwiched active–passive, silk‐on‐silk materials. Both experimental and modeling results confirmed that the shape of individual sheets effectively controls biaxial stresses within these sheets, which can self‐roll into distinct 3D structures including microscopic rings, tubules, and helical tubules. This is a unique example of tailoring self‐rolled 3D geometries through shape design without changing the inner morphology of active bimorph biomaterials. In contrast to traditional organic‐soluble synthetic materials, we utilized a biocompatible and biodegradable biopolymer that underwent a facile aqueous layer‐by‐layer (LbL) assembly process for the fabrication of 2D films. The resulting films can undergo reversible pH‐triggered rolling/unrolling, with a variety of 3D structures forming from biopolymer structures that have identical morphology and composition.     

Fabrication of complex three-dimensional microchannel systems in PDMS

This paper describes a method for fabricating three-dimensional (3D) microfluidic channel systems in poly(dimethylsiloxane) (PDMS) with complex topologies and geometries that include a knot, a spiral channel, a "basketweave" of channels, a chaotic advective mixer, a system with "braided" channels, and a 3D grid of channels. Pseudo-3D channels, which are topologically equivalent to planar channels, are generated by bending corresponding planar channels in PDMS out of the plane into 3D shapes. True 3D channel systems are formed on the basis of the strategy of decomposing these complex networks into substructures that are planar or pseudo-3D. A methodology is developed that connects these planar and/or pseudo-3D structures to generate PDMS channel systems with the original 3D geometry. This technique of joining separate channel structures can also be used to create channel systems in PDMS over large areas by connecting features on different substrates. The channels can be used as templates to form 3D structures in other materials.     

Self‐(Un)rolling Biopolymer Microstructures: Rings,Tubules, and Helical Tubules from the Same Material

We have demonstrated the facile formation of reversible and fast self‐rolling biopolymer microstructures from sandwiched active–passive, silk‐on‐silk materials. Both experimental and modeling results confirmed that the shape of individual sheets effectively controls biaxial stresses within these sheets, which can self‐roll into distinct 3D structures including microscopic rings, tubules, and helical tubules. This is a unique example of tailoring self‐rolled 3D geometries through shape design without changing the inner morphology of active bimorph biomaterials. In contrast to traditional organic‐soluble synthetic materials, we utilized a biocompatible and biodegradable biopolymer that underwent a facile aqueous layer‐by‐layer (LbL) assembly process for the fabrication of 2D films. The resulting films can undergo reversible pH‐triggered rolling/unrolling, with a variety of 3D structures forming from biopolymer structures that have identical morphology and composition.     

Ambient rutile VO2(R) hollow hierarchitectures with rich grain boundaries from new-state nsutite-type VO2, displaying enhanced hydrogen adsorption behavior

Modulating the interaction between small gas molecules and solid host materials is becoming increasingly important for the future society due to the alternative energy resources especially for the hydrogen energy. As is known, two catalogues of materials such as two-dimensional (2D) lamellar cavity structures and three-dimensional (3D) infinite tunnel structures have received intensive considerations during the past decades. Herein, we put forward a new alternative that the solid materials with synergic effects of grain-boundary-rich (GBR) structure and 3D hierarchical hollow structure would also be a promising candidate for modulating the gas molecules in solid adsorbents. As expected, our constructed novel 3D hollow hierarchitectures with GBR shells standing on the hollow spherical cavity indeed resulted in the enhanced hydrogen adsorption behavior. The as-prepared 3D hollow hierarchitectures were very uniform in large scale, and the very simple reaction process offers high convenience, short reaction time, and no need for any complex manipulations or equipments. The hollow outlook of the rutile VO(2)(R) 3D hierarchitectures is the reminiscence of the hollow cavity of nsutite-type VO(2), while the formation of the VO(2)(R) GBR structure is attributed to volume shrink from a unique intergrowth structure of nsutite-type VO(2). The novel gas modulation model with the synergic effect of GBR structure and hierarchical hollow structure may pave a new way for developing materials in energy and environmental fields in the near future.     

Plasma Processing of Scaffolds for Tissue Engineering and Regenerative Medicine

Plasma processes are largely employed in the biomedical field for different kind of materials. In particular, in tissue engineering, biomaterials need to be totally integrated with biological systems in order to be employed as substitutes of artificial prostheses. Since most materials do not allow a correct integration with the biological environment, plasma processes have been demonstrated to be very versatile in altering the material surface properties in order to improve the biocompatibility of materials. The challenge is to plasma modify 3D scaffolds in order to be used for in vivo regeneration of human tissues. The correct 3D biointegration inside living tissues is the crucial objective, towards which many aspects are directed, from the material engineering to its surface modification and affinity with the biological environment. In this paper, the advances in low pressure plasma processes, applied to both 2D rigid substrates and 3D porous structures, are discussed. Further an in vivo experiment in ovine animals using plasma processed 3D scaffolds is illustrated.     

Fe-based phosphate nanostructures for supercapacitors

Fe-based phosphates with excellent physical and chemical features are potential electrode materials for supercapacitors.In this work,we successfully synthesized Fe-based phosphates with different dimensions,morphologies,and compositions by one-step hydrothermal method.Influence factors on the chemical composition and morphology of the as-prepared materials were explored and the energy storage performance of the as-prepared samples were tested under the traditional three electrode system.Two-dimensional(2 D) iron metaphosphate(Fe(PO_3)_3) showed the best electrochemical performance.For Fe(PO_3)_3 electrode mate rials,the layered structure can provide a larger specific surface area than the bulk structure,which is conducive to the diffusion and transport of electrolyte ions during charging-discha rging and further improve s the rate perfo rmance and cycle stability of supe rcapacito r.2 D Fe(PO_3)_3 and activated carbon were used as electrode materials to construct a 2 D Fe(PO_3)_3//AC supercapacitor.The supercapacitor showed high energy density,high power density,and excellent cycling stability,which indicates 2 D Fe(PO_3)_3 is a promising electrode material for supercapacitors.     

Opening of Band Gap of Graphene with High Electronic Mobility by Codoping BN Pairs

Two-dimensional(2D) materials with a high density and low power consumption have become the most popular candidates for next-generation semiconductor electronic devices. As a prototype 2D material, graphene has attracted much attention owing to its stability and ultrahigh mobility. However, zero band gap of graphene leads to very low on-off ratios and thus limits its applications in electronic devices, such as transistors. Although some new 2D materials and doped graphene have nonzero band gaps, the electronic mobility is sacrificed. In this study, to open the band gap of graphene with high electronic mobility, the structure and property of BN-doped graphene were evaluated using first-principles calculations. The formation energies indicate that the six-membered BN rings doped graphene has the most favorable configuration. The band structures show that the band gaps can be opened by such type of doping. Also, the Dirac-cone-like band dispersion of graphene is mostly inhibited, ensuring high electronic mobility. Therefore, codoping BN into graphene might provide 2D materials with nonzero band gaps and high electronic mobility.     

Assembly of one dimensional inorganic nanostructures into functional 2D and 3D architectures. Synthesis, arrangement and functionality

This review will focus on the synthesis, arrangement, structural assembly, for current and future applications, of 1D nanomaterials (tubes, wires, rods) in 2D and 3D ordered arrangements. The ability to synthesize and arrange one dimensional nanomaterials into ordered 2D or 3D micro or macro sized structures is of utmost importance in developing new devices and applications of these materials. Micro and macro sized architectures based on such 1D nanomaterials (e.g. tubes, wires, rods) provide a platform to integrate nanostructures at a larger and thus manageable scale into high performance electronic devices like field effect transistors, as chemo- and biosensors, catalysts, or in energy material applications. Carbon based, metal oxide and metal based 1D arranged materials as well as hybrid or composite 1D materials of the latter provide a broad materials platform, offering a perspective for new entries into fascinating structures and future applications of such assembled architectures. These architectures allow bridging the gap between 1D nanostructures and the micro and macro world and are the basis for an assembly of 1D materials into higher hierarchy domains. This critical review is intended to provide an interesting starting point to view the current state of the art and show perspectives for future developments in this field. The emphasis is on selected nanomaterials and the possibilities for building three dimensional arrays starting from one dimensional building blocks. Carbon nanotubes, metal oxide nanotubes and nanowires (e.g. ZnO, TiO(2), V(2)O(5), Cu(2)O, NiO, Fe(2)O(3)), silicon and germanium nanowires, and group III-V or II-VI based 1D semiconductor nanostructures like GaS and GaN, pure metals as well as 1D hybrid materials and their higher organized architectures (foremost in 3D) will be focussed. These materials have been the most intensively studied within the last 5-10 years with respect to nano-micro integration aspects and their functional and application oriented properties. The critical review should be interesting for a broader scientific community (chemists, physicists, material scientists) interested in synthetic and functional material aspects of 1D materials as well as their integration into next higher organized architectures.     

Three‐Dimensional Anionic Cyclodextrin‐Based Covalent Organic Frameworks

Three‐dimensional covalent organic frameworks (3D COFs) are promising crystalline materials with well‐defined structures, high porosity, and low density; however, the limited choice of building blocks and synthetic difficulties have hampered their development. Herein, we used a flexible and aliphatic macrocycle, namely γ‐cyclodextrin (γ‐CD), as the soft struts for the construction of a polymeric and periodic 3D extended network, with the units joined via tetrakis(spiroborate) tetrahedra with various counterions. The inclusion of pliable moieties in the robust open framework endows these CD‐COFs with dynamic features, leading to a prominent Li ion conductivity of up to 2.7 mS cm⁻¹ at 30 °C and excellent long‐term Li ion stripping/plating stability. Exchanging the counterions within the pores can effectively modulate the interactions between the CD‐COF and CO₂ molecules.     

Liquid‐Phase Enantioselective Chromatographic Resolution Using Interpenetrated,Homochiral Framework Materials

Effective separation of mixtures of enantiomers is of continuing interest in analytical and preparative chromatography, with new materials frequently designed and tested. We report two new enantiomerically pure 2D→3D interpenetrated materials used as stationary liquid chromatographic (LC) phases that are shown to resolve selected racemic mixtures with enantiomeric and chemical selectivity. Dicarboxylate ligands derived from amino acids on naphthalene and perylene cores form 2D frameworks that interpenetrate to give 3D structures. Selectivity is initially tested by uptake from solution; subsequent LC methods show that the materials exhibit resolution of racemic analytes in ‘micro‐columns’ and that the two closely related materials show markedly different selectivity for different analytes with much greater activity than the ligands alone. Comparison with a close‐packed analogue suggests that the separation activity is largely due to surface effects.     

Valorization of by-products of the sugar industry: New nanostructured hybrid materials containing sugar derived structures

This article describes some possibilities opened by sugar-derived structures in the field of new materials. We selected commercially available structures, mannitol M, sorbitol S, dulcitol D, which are low cost by-products of industrial sugars used for food. These structures present OH functions regularly distributed on a chiral carbon chain. We report here a valorization of these by-products by incorporating them into new silica hybrids. The synthesis, achieved by direct silylation of polyols M, S and D either with 3-(triethoxysilylpropyl)isocyanate, or 3-iodopropyltriethoxysilane led directly to the corresponding materials. The polycondensation occurred in situ because of the presence of a very tight hydrogen bonds network between the organic cores. Incorporation of gold (0) nanoparticles and lanthanide complexations were successfully investigated.