Time-resolved fluorescence spectroscopic and scanning near-field optical microscopic studies of rhodamine dye adsorbed in cationic Langmuir-Blodgett films

The fluorescence lifetimes decays and picosecond time-resolved fluorescence spectra were measured to investigate the dynamics of the excited state of sulforhodamine B (SRB) molecules adsorbed in the mono- and multilayered Langmuir-Blodgett (LB) films of octadecylamine. Steady-state and time-resolved fluorescence spectroscopy reveals that the fluorescence lifetimes and contents of the monomer and dimers in the molecular organizates depend upon the concentration of the dye in the solution and the adsorption process. SRB dye molecules adsorbed in LB films have been imaged with scanning near-field optical microscopy (SNOM). This information is exploited to map the distribution with molecular spatial resolution. SNOM provide the visual evidence of the monomers and dimers of SRB in cationic LB films.     

Drastic difference in lifetimes of the charge-separated state of the formanilide-anthraquinone dyad versus the ferrocene-formanilide-anthraquinone triad and their photoelectrochemical properties of the composite films with fullerene clusters

A long-lived charge-separated (CS) state, which can be observed even at 900 mus after laser excitation, has been attained in the formanilide-anthraquinone dyad (FA-AQ) in dimethyl sulfoxide, whereas the CS lifetime is shortened significantly to 20 ps in the ferrocene-formanilide-anthraquinone triad (Fc-FA-AQ). Such a drastic decrease in the CS lifetime by the addition of a ferrocene moiety to the FA-AQ dyad is ascribed to a decrease in the driving force of back electron transfer and an increase in the reorganization energy of electron transfer despite the longer charge-separation distance. The FA-AQ dyad and the Fc-FA-AQ triad have been employed as components of photovoltaic cells, where composite molecular nanoclusters of the FA-AQ dyad or the Fc-FA-AQ triad with fullerene (C60) are assembled onto a SnO2 electrode using an electrophoretic method. The composite films of the Fc-FA-AQ triad exhibit 10 times smaller values of an incident photon-to-photocurrent efficiency (IPCE) as compared with those of the FA-AQ dyad in accordance with a drastic decrease of the CS lifetime by addition of a ferrocene moiety to the FA-AQ dyad.     

Rippled domain formation in phase-separated mixed Langmuir-Blodgett films

The morphology and composition of phase-separated Langmuir and Langmuir-Blodgett films of stearic acid (C17H35COOH) (SA) mixed with perfluorotetradecanoic acid (C13F27COOH) (PA) have been investigated using a combination of atomic force microscopy (AFM) measurements and surface pressure-area isotherms. At elevated surface pressures, the mixed film phase-separated to form a distinct series of lines (ripples), as opposed to the hexagons that have previously been observed with mixed films with longer alkyl chain fatty acids. At low surface pressures, phase separation is still observed, though a range of different domain structures was formed. The chemical composition of the phase-separated domains has been investigated by AFM-based compositional mapping, which has allowed unambiguous identification of the chemical composition of the domains. A simple mechanistic model describing how domain formation takes place in this system is presented.     

In situ thermo-optical studies of polymer:fullerene blend films

Optical properties of a blend thin film (1:1 wt) of poly(3-hexylthiophene) (P3HT) and [6,6]-phenyl-C61-butyric acid methyl ester (PCBM) exposed to a stepwise heating and cooling, have been reported and compared with the properties of pure PCBM and P3HT films. The UV–Vis(T) absorption measurements were performed in situ, during annealing and cooling runs, at the precisely defined temperatures, in a range of 20–210 °C. It was demonstrated that this new method allows to observe the changes of absorption coefficient spectra and absorption edge parameters: the energy gap (E_G) and the Urbach energy (E_U), connected with the length of conjugation and structural disorder of thin film, respectively. Several stages, during annealing/cooling runs, were distinguished for the P3HT:PCBM blend film and related to the following processes, as an increase of P3HT crystallinity in the blend, the orderly stacking of polymer chains, thermally induced structural defects and the phase separation, caused by an aggregation of PCBM in the polymer matrix. These changes were also observed on the P3HT:PCBM film surface, by means to the microscopic studies.     

Self-assembly of a pi-electronic amphiphile consisting of a zinc porphyrin-fullerene dyad: formation of micro-vesicles with a high stability

An amphiphilic zinc porphyrin-fullerene dyad appended with triethyleneglycol chains in aqueous media forms uniformly-sized multilamellar vesicles with a mean diameter of 100 nm that are thermally stable and robust against membrane lysis with surfactants.     

X-ray studies on Langmuir-Blodgett films of novel amphiphilic oligothiophenes

A new type of amphiphilic thiophene, oligo[n-alkyl-3-(3-thienyl) glutaric acid], was synthesised (with n = 8, 12 or 18). These molecules form a stable monolayer at the air/water interface. Successful Langmuir-Blodgett (LB) deposition was achieved by vertical dipping. The LB films of Y-type exhibit well-defined layered structures, as determined by X-ray diffraction measurements, with a regular molecular arrangement within the layers.     

杯芳烃-卟啉化合物及其金属配合物的Langmuir-Blodgett膜研究

通过对杯芳烃-卟啉化合物及其锌、钯配合物LB膜的表面压-表面积等温线、紫外可见光谱和傅里叶变换红外光谱的检测,研究了它们在气/液界面和Langmuir-Blodgett膜中的性质,并用量子力学方法优化了杯芳烃-卟啉化合物的构型.结果表明,成膜时3种化合物分子中卟啉环都倾斜地排列在亚相表面,且卟啉环间存在π-π相互作用.连接杯芳烃和卟啉之间的碳氢链在膜性质中起着重要的作用,杯芳烃-卟啉化合物分子中这种碳氢链的有序性小于其锌、钯配合物分子中的这种碳氢链有序性.     

Self-assembled via axial coordination magnesium porphyrin-imidazole appended fullerene dyad: spectroscopic, electrochemical, computational, and photochemical studies

Spectroscopic, redox, and electron transfer reactions of a self-assembled donor-acceptor dyad formed by axial coordination of magnesium meso-tetraphenylporphyrin (MgTPP) and fulleropyrrolidine appended with an imidazole coordinating ligand (C(60)Im) were investigated. Spectroscopic studies revealed the formation of a 1:1 C(60)Im:MgTPP supramolecular complex, and the anticipated 1:2 complex could not be observed because of the needed large amounts of the axial coordinating ligand. The formation constant, K(1), for the 1:1 complex was found to be (1.5 +/- 0.3) x 10(4) M(-1), suggesting fairly stable complex formation. The geometric and electronic structures of the dyads were probed by ab initio B3LYP/3-21G() methods. The majority of the highest occupied frontier molecular orbital (HOMO) was found to be located on the MgTPP entity, while the lowest unoccupied molecular orbital (LUMO) was on the fullerene entity, suggesting that the charge-separated state of the supramolecular complex is C(60)Im(*-):MgTPP(*+). Redox titrations involving MgTPP and C(60)Im allowed accurate determination of the oxidation and reduction potentials of the donor and acceptor entities in the supramolecular complex. These studies revealed more difficult oxidation, by about 100 mV, for MgTPP in the pentacoordinated C(60)Im:MgTPP compared to pristine MgTPP in o-dichlorobenzene. A total of six one-electron redox processes corresponding to the oxidation and reduction of the zinc porphyrin ring and the reduction of fullerene entities was observed within the accessible potential window of the solvent. The excited state events were monitored by both steady state and time-resolved emission as well as transient absorption techniques. In o-dichlorobenzene, upon coordination of C(60)Im to MgTPP, the main quenching pathway involved electron transfer from the singlet excited MgTPP to the C(60)Im moiety. The rate of forward electron transfer, k(CS), calculated from the picosecond time-resolved emission studies was found to be 1.1 x 10(10) s(-1) with a quantum yield, Phi(CS), of 0.99, indicating fast and efficient charge separation. The rate of charge recombination, k(CR), evaluated from nanosecond transient absorption studies, was found to be 8.3 x 10(7) s(-1). A comparison between k(CS) and k(CR) suggested an excellent opportunity to utilize the charge-separated state for further electron-mediating processes.     

Immobilization of a fluorescent dye in Langmuir-Blodgett films

We immobilized a hemicyanine dye, Di-8-ANEPPS, in ordered thin films of an organic matrix, dihexadecyl phosphate (DHP), and we transferred the mixed monolayers onto solid support by the Langmuir-Blodgett technique. We used gold and quartz slides and indium tin oxide (ITO) evaporated on glass slides as substrates. The multilayers formation was confirmed by ellipsometric and contact angle measurements. The optical response of the nanostructures was investigated collecting UV-Vis absorption and fluorescence emission intensity profiles.     

Langmuir-Blodgett films of cellulose nanocrystals: preparation and characterization

The goal of this work is the preparation of monolayers of cellulose I nanocrystals providing flat crystalline cellulose surfaces. Suspensions of cellulose nanocrystals were prepared by hydrolyzing ramie and tunicin fibers with sulfuric acid. Due to surface grafted sulfate groups, the negatively charged, rod-like cellulose nanocrystals were found to form stable layers at the air-water interface in the presence of a cationic amphiphilic molecule such as dioctadecyldimethylammonium (DODA) used in this work. These layers were formed at different cellulose-DODA weight ratios, compressed and analyzed by tensiometry, ellipsometry and Brewster angle microscopy. At low cellulose concentrations the layers are discontinuous, becoming dense and homogeneous upon reaching a critical weight ratio, which depends on the aspect ratio of the cellulose nanocrystals. After transfer onto silicon wafers, the surface composition and morphology as well as the thickness of the films were examined by X-ray photoelectron spectroscopy, ellipsometry and atomic force microscopy. The results indicate that they are monolayer films, well structured, relatively smooth and pure. These films offer a crystalline and easily reproducible model cellulose surface.     

Fourier transform infrared studies of alternate acid-amine Langmuir-Blodgett films with pyroelectric properties

FTIR-RAIRS and ATR techniques are shown to provide a powerful means of investigating the molecular behaviour responsible for the pyroelectric properties of organic monolayer assemblies on silicon and aluminised glass. Spectral changes, associated with either proton transfer or head group rearrangement, are well correlated with the level of pyroelectric response for two different devices. The technique promises to be extremely important for the elucidation of the microscopic properties of molecular electronic devices.     

Langmuir-Blodgett films of diazobenzene molecules

Langmuir-Blodgett (LB) films from diazobenzene Sudan III have been investigated using surface potential measurements as a function of number of layers and deposition pressures, with the surface potential data being related to molecular dipole moments obtained from theoretical electronic structure calculations. The surface potential increased with the number of layers for SIII LB films, and then tended to saturate. Results from density functional theory (DFT) and UV-vis spectroscopy indicated that the increase is due to addition of layers with oriented molecular dipoles, with the saturation tendency being attributed to a decrease in the amount of material deposited in each layer. The surface potential increased with the surface pressure used for deposition, probably owing to a higher contribution from the vertical component of the dipole moment as a closer molecular packing, which is associated with decreasing conformational entropy, was reached.     

Langmuir-Blodgett films of biopolymers: a method to obtain protein multilayers

In this work, we present a methodology for choosing the best experimental conditions for transferring protein Langmuir films onto solid substrates. As an example of applying the proposed methodology, we used monolayers of the protein bovine serum albumin, which is a very stable protein and is of great interest in the development of immunosensors. Langmuir-Blodgett (LB) films of this protein, on different solid substrates, were obtained and characterized as a function of pH, surface pressure, temperature, and contact angle. The compressibility modulus, the spreading entropy, and the fraction of desorbed protein sections were used as control parameters to find these conditions. A careful analysis of these parameters shows that there is a window on the values of these experimental parameters in which the LB films are best formed. Our methodology can be applied to other biomacromolecules to find the best conditions to form LB films from isotherm measurements.     

Langmuir and Langmuir-Blodgett films of a novel tryptophan peptide lipid

A novel tryptophan peptide lipid, C18H35O (SA)-Gly-Trp-Gly-OH, was synthesized and studied for its surface chemistry and spectroscopic properties.     

Synthesis of a linear benzo[3]phenylene-[60]fullerene dyad

The synthesis of a new linear benzo[3]phenylene-[60]fullerene dyad 1 is achieved over 10 steps in 15% overall yield by using an efficient sequence combining a double cobalt(I)-mediated cyclotrimerization with a Bingel reaction.     

Langmuir-Blodgett films of phycobiliproteins (I)——Monomolecular film and conformational studies of R-phycoerythrin

The surface pressure-area (π-A) isotherm of R-phycoerythrin (R-PE) at the air-water interface has been measured. The results indicate that R-PE can form the monomolecular film. Moreover, the molecule-occupied area extrapolating the linear part of the n-A isotherm is identical with that when an R-PE molecule is located at the interface with its disk plane parallel to the air-water interface. The transmission electron micrograph (TEM) and the measurement of the thickness of the protein monolayer by ellipsometry show that the orientation of R-PE disk plane on the substrate is parallel to the plane of substrate. Absorption and fluorescence spectra of R-PE LB multilayers were obtained through transferring R-PE monolayer at the air-water interface to the substrates at the proper surface pressure by Langmuir-Blodgett (LB) technique. These spectra of R-PE LB films do not show distinct differences from those in aqueous solution. Comparative studies of circular dichroism (CD) spectra of the protein between in aq     

Metal-molecule-metal junctions in Langmuir-Blodgett films using a new linker: trimethylsilane

Herein trimethylsilane (TMS) is demonstrated to be an efficient binding group suitable for construction of metal-molecule-metal (M-mol-M') junctions, in which one of the metal contacts is an atomically flat gold surface and the other a scanning tunnelling microscopy (STM) tip. The molecular component of the M-mol-M' devices is an oligomeric phenylene ethynylene (OPE) derivative Me(3)Si C≡C{C(6)H(4)C≡C}(2)C(6)H(4)NH(2), featuring both Me(3)SiC≡C and NH(2) metal contacting groups. This compound can be assembled into Langmuir-Blodgett (LB) films on Au--substrates by surface binding through the amine groups. Alternatively, low coverage (sub-monolayer) films are formed by adsorption from solution. In the case of condensed monolayers top electrical contacts are formed to STM tips through the TMS end group. In low coverage films, single molecular bridges can be formed between the gold surface and a gold STM tip. The similarity in the I-V response of a one-layer LB film and the single molecule conductance experiments reveals several points of critical importance to the design of molecular components for use in the construction of M-mol-M' junctions. Firstly, the presence of neighbouring π systems does not have a significant effect on the conductance of the M-mol-M' junction. Secondly, in the STM configuration, intermolecular electron hopping does not significantly enhance the junction transport characteristics. Thirdly, the symmetric behaviour of the I-V curves obtained, despite the different metal-molecule contacts, indicates that the molecule is simply an amphiphilic electron-donating wire and not a molecular diode with strong rectifying characteristics. Finally, the conductance values obtained from the amine/TMS-contacted OPE described here are of the same order of magnitude as thiol anchored OPEs, making them attractive alternatives to the more conventionally used thiol-contacting chemistry for OPE molecular wires.     

Self-organization of a sulfonamido-porphyrin in Langmuir monolayers and Langmuir-Blodgett films

Langmuir monolayers (LM) and Langmuir-Blodgett (LB) films of pure lipophilic meso-tetra(4-dodecylaminosulfophenyl)porphyrin (PC12) and mixed with the anionic surfactant sodium hexadecylsulfate (SHS) were studied. The molecular packing and structure of PC12 and PC12-4SHS with variable surface pressure were investigated by surface pressure-area measurements, steady-state absorption, fluorescence emission and anisotropy, as well as by fluorescence lifetime imaging microscopy (FLIM). At low surface pressure, the porphyrin molecules are organized with the rings tilted on the water surface whereas at high surface pressure the porphyrin rings achieve a more perpendicular arrangement. Using the FLIM images a gradual change of aggregates into large "islands" is observed. Different patterns are observed in the pure PC12 multilayer films (n = 3 and 5) with ordered patches superimposed which are not observed in the PC12-4SHS multilayer LB films.