Suppressing the P2–O2 Phase Transition of Na0.67Mn0.67Ni0.33O2 by Magnesium Substitution for Improved Sodium‐Ion Batteries

Room‐temperature sodium‐ion batteries (SIBs) have shown great promise in grid‐scale energy storage, portable electronics, and electric vehicles because of the abundance of low‐cost sodium. Sodium‐based layered oxides with a P2‐type layered framework have been considered as one of the most promising cathode materials for SIBs. However, they suffer from the undesired P2–O2 phase transition, which leads to rapid capacity decay and limited reversible capacities. Herein, we show that this problem can be significantly mitigated by substituting some of the nickel ions with magnesium to obtain Na_0.67Mn_0.67Ni_0.33?xMg_xO₂ (0≤x≤0.33). Both the reversible capacity and the capacity retention of the P2‐type cathode material were remarkably improved as the P2–O2 phase transition was thus suppressed during cycling. This strategy might also be applicable to the modulation of the physical and chemical properties of layered oxides and provides new insight into the rational design of high‐capacity and highly stable cathode materials for SIBs.     

A High-Energy NASICON-Type Na3.2MnTi0.8V0.2(PO4)3 Cathode Material with Reversible 3.2-Electron Redox Reaction for Sodium-Ion Batteries

Na superionic conductor (NASICON) structured cathode materials with robust structural stability and large Na⁺ diffusion channels have aroused great interest in sodium-ion batteries (SIBs). However, most of NASICON-type cathode materials exhibit redox reaction of no more than three electrons per formula, which strictly limits capacity and energy density. Herein, a series of NASICON-type Na_3+xMnTi_1−xV_x(PO₄)₃ cathode materials are designed, which demonstrate not only a multi-electron reaction but also high voltage platform. With five redox couples from V^5+/4+ (≈4.1 V), Mn^4+/3+ (≈4.0 V), Mn^3+/2+ (≈3.6 V), V^4+/3+ (≈3.4 V), and Ti^4+/3+ (≈2.1 V), the optimized material, Na_3.2MnTi_0.8V_0.2(PO₄)₃, realizes a reversible 3.2-electron redox reaction, enabling a high discharge capacity (172.5 mAh g⁻¹) and an ultrahigh energy density (527.2 Wh kg⁻¹). This work sheds light on the rational construction of NASICON-type cathode materials with multi-electron redox reaction for high-energy SIBs.     

Deciphering an Abnormal Layered-Tunnel Heterostructure Induced by Chemical Substitution for the Sodium Oxide Cathode

Demands for large-scale energy storage systems have driven the development of layered transition-metal oxide cathodes for room-temperature rechargeable sodium ion batteries (SIBs). Now, an abnormal layered-tunnel heterostructure Na_0.44Co_0.1Mn_0.9O₂ cathode material induced by chemical element substitution is reported. By virtue of beneficial synergistic effects, this layered-tunnel electrode shows outstanding electrochemical performance in sodium half-cell system and excellent compatibility with hard carbon anode in sodium full-cell system. The underlying formation process, charge compensation mechanism, phase transition, and sodium-ion storage electrochemistry are clearly articulated and confirmed through combined analyses of in situ high-energy X-ray diffraction and ex situ X-ray absorption spectroscopy as well as operando X-ray diffraction. This crystal structure engineering regulation strategy offers a future outlook into advanced cathode materials for SIBs.     

Realizing Complete Solid-Solution Reaction in High Sodium Content P2-Type Cathode for High-Performance Sodium-Ion Batteries

P2-type layered oxides suffer from an ordered Na⁺/vacancy arrangement and P2→O2/OP4 phase transitions, leading them to exhibit multiple voltage plateaus upon Na⁺ extraction/insertion. The deficient sodium in the P2-type cathode easily induces the bad structural stability at deep desodiation states and limited reversible capacity during Na⁺ de/insertion. These drawbacks cause poor rate capability and fast capacity decay in most P2-type layered oxides. To address these challenges, a novel high sodium content (0.85) and plateau-free P2-type cathode-Na_0.85Li_0.12Ni_0.22Mn_0.66O₂ (P2-NLNMO) was developed. The complete solid-solution reaction over a wide voltage range ensures both fast Na⁺ mobility (10⁻¹¹ to 10⁻¹⁰ cm² s⁻¹) and small volume variation (1.7 %). The high sodium content P2-NLNMO exhibits a higher reversible capacity of 123.4 mA h g⁻¹, superior rate capability of 79.3 mA h g⁻¹ at 20 C, and 85.4 % capacity retention after 500 cycles at 5 C. The sufficient Na and complete solid-solution reaction are critical to realizing high-performance P2-type cathodes for sodium-ion batteries.     

Recent developments on layered 3d-transtition metal oxide cathode materials for sodium-ion batteries

Sodium-ion batteries (SIBs) are now intensively developed as a cost-effective technology alternative to lithium-ion batteries (LIBs) for large-scale energy storage because of their various advantages such as huge abundance of sodium resources, highly safe and significantly low cost. Among many other cathode materials, layered 3d-transition metal oxides (LTMO-Na_xMO₂, x ≤ 1 and M = Co, Ni, Mn, Cr, Cu, Fe and V) have gained an enormous interest and attractive attention among researchers because of their low-cost, high energy density and ease of synthesis. In addition, LTMOs offer higher reversible capacities because of relatively lower molecular weights; however, complex phase transformations limit their cycling life. Based on the previous research, it was examined that the crystalline phase of LTMO highly influences the electrochemical performance of SIBs; therefore, this review mainly focuses on the latest advances of various crystalline phases such as P2-type, P3-type, O3-type and biphase/multiphase materials and its strength as well as future prospects and challenges.     

Ion-exchange properties of P2-NaxMnO2: evidence of the retention of the layer structure based on chemical reactivity data and electrochemical measurements of lithium cells

The ion-exchange properties of two P2-type layered Na_xMnO₂ bronzes (x=0.6, 0.75) with a differential microstructure were studied in LiCF₃SO₃ solutions in acetonitrile under ambient conditions. Na⁺ ions are readily exchanged with Li⁺, but the reaction causes a significant loss of crystallinity that results in some amorphization. The feasibility of the process increases with increasing structural disorder in the parent compound; conversion, however, is incomplete. The ability of the exchanged material to intercalate water in the air is consistent with the formation of an Li-Mn-O compound that retains the layered framework. Also, the electrochemical data obtained for this material as cathode in lithium cells are consistent with retention of the layer structure and exclude a potential spinel transition due to the ion-exchange reaction. However, the cycling properties of cells made from these layered compounds are quite modest, probably because of the strong structural disorder induced by the lithium reaction.     

P2‐Na0.67AlxMn1−xO2: Cost‐Effective,Stable and High‐Rate Sodium Electrodes by Suppressing Phase Transitions and Enhancing Sodium Cation Mobility

Sodium layered P2‐stacking Na_0.67MnO₂ materials have shown great promise for sodium‐ion batteries. However, the undesired Jahn–Teller effect of the Mn⁴⁺/Mn³⁺ redox couple and multiple biphasic structural transitions during charge/discharge of the materials lead to anisotropic structure expansion and rapid capacity decay. Herein, by introducing abundant Al into the transition‐metal layers to decrease the number of Mn³⁺, we obtain the low cost pure P2‐type Na_0.67Al_xMn_1?xO₂ (x=0.05, 0.1 and 0.2) materials with high structural stability and promising performance. The Al‐doping effect on the long/short range structural evolutions and electrochemical performances is further investigated by combining in situ synchrotron XRD and solid‐state NMR techniques. Our results reveal that Al‐doping alleviates the phase transformations thus giving rise to better cycling life, and leads to a larger spacing of Na⁺ layer thus producing a remarkable rate capability of 96 mAh g^‐1 at 1200 mA g^‐1.     

P2‐Na0.67AlxMn1−xO2: Cost‐Effective,Stable and High‐Rate Sodium Electrodes by Suppressing Phase Transitions and Enhancing Sodium Cation Mobility

Sodium layered P2‐stacking Na_0.67MnO₂ materials have shown great promise for sodium‐ion batteries. However, the undesired Jahn–Teller effect of the Mn⁴⁺/Mn³⁺ redox couple and multiple biphasic structural transitions during charge/discharge of the materials lead to anisotropic structure expansion and rapid capacity decay. Herein, by introducing abundant Al into the transition‐metal layers to decrease the number of Mn³⁺, we obtain the low cost pure P2‐type Na_0.67Al_xMn_1?xO₂ (x=0.05, 0.1 and 0.2) materials with high structural stability and promising performance. The Al‐doping effect on the long/short range structural evolutions and electrochemical performances is further investigated by combining in situ synchrotron XRD and solid‐state NMR techniques. Our results reveal that Al‐doping alleviates the phase transformations thus giving rise to better cycling life, and leads to a larger spacing of Na⁺ layer thus producing a remarkable rate capability of 96 mAh g^‐1 at 1200 mA g^‐1.     

The Synthesis of Porous Na3V2(PO4)3 for Sodium-Ion Storage

Na₃V₂(PO₄)₃ (NVP) has been regarded as a potential cathode material for sodium-ion batteries (SIBs) due to its excellent structural stability and rapid Na⁺ conductivity. However, its electrochemical performances are restricted by the large bulk structure and poor electronic conductivity. The construction of porous NVP materials is a powerful method to improve the electrochemical properties. This concept aims to provide an overview of recent progress of porous NVP materials for SIBs. Herein, the synthetic strategies and formation mechanisms of porous NVP materials as well as the relationship between the porous structures and electrochemical performances of NVP materials are reviewed. Furthermore, the challenges and prospects for the preparation of porous NVP materials in this field are outlined.     

Combustion-synthesized sodium manganese (cobalt) oxides as cathodes for sodium ion batteries

We report on the electrochemical properties of layered manganese oxides, with and without cobalt substituents, as cathodes in sodium ion batteries. We fabricated sub-micrometre-sized particles of Na_0.7MnO_2?+?z and Na_0.7Co_0.11Mn_0.89O_2?+?z via combustion synthesis. X-ray diffraction revealed the same layered hexagonal P2-type bronze structure with high crystallinity for both materials. Potentiostatic and galvanostatic charge/discharge cycles in the range 1.5–3.8 V vs. Na | Na⁺ were performed to identify potential-dependent phase transitions, capacity, and capacity retention. After charging to 3.8 V, both materials had an initial discharge capacity of 138 mA?h?g^?1 at a rate of 0.3 C. For the 20th cycle, those values reduced to 75 and 92 mA?h?g^?1 for Co-free and Co-doped samples, respectively. Our findings indicate that earlier works probably underestimated the potential of (doped) P2-type Na_0.7MnO_2?+?z as cathode material for sodium ion batteries in terms of capacity and cycle stability. Apart from doping, a simple optimization parameter seems to be the particle size of the active material.     

Deciphering an Abnormal Layered‐Tunnel Heterostructure Induced by Chemical Substitution for the Sodium Oxide Cathode

Demands for large‐scale energy storage systems have driven the development of layered transition‐metal oxide cathodes for room‐temperature rechargeable sodium ion batteries (SIBs). Now, an abnormal layered‐tunnel heterostructure Na_0.44Co_0.1Mn_0.9O₂ cathode material induced by chemical element substitution is reported. By virtue of beneficial synergistic effects, this layered‐tunnel electrode shows outstanding electrochemical performance in sodium half‐cell system and excellent compatibility with hard carbon anode in sodium full‐cell system. The underlying formation process, charge compensation mechanism, phase transition, and sodium‐ion storage electrochemistry are clearly articulated and confirmed through combined analyses of in situ high‐energy X‐ray diffraction and ex situ X‐ray absorption spectroscopy as well as operando X‐ray diffraction. This crystal structure engineering regulation strategy offers a future outlook into advanced cathode materials for SIBs.     

Cobalt‐Doped FeS2 Nanospheres with Complete Solid Solubility as a High‐Performance Anode Material for Sodium‐Ion Batteries

Considering that the high capacity, long‐term cycle life, and high‐rate capability of anode materials for sodium‐ion batteries (SIBs) is a bottleneck currently, a series of Co‐doped FeS₂ solid solutions with different Co contents were prepared by a facile solvothermal method, and for the first time their Na‐storage properties were investigated. The optimized Co_0.5Fe_0.5S₂ (Fe0.5) has discharge capacities of 0.220 Ah g^?1 after 5000 cycles at 2 A g^?1 and 0.172 Ah g^?1 even at 20 A g^?1 with compatible ether‐based electrolyte in a voltage window of 0.8–2.9 V. The Fe0.5 sample transforms to layered Na_xCo_0.5Fe_0.5S₂ by initial activation, and the layered structure is maintained during following cycles. The redox reactions of Na_xCo_0.5Fe_0.5S₂ are dominated by pseudocapacitive behavior, leading to fast Na⁺ insertion/extraction and durable cycle life. A Na₃V₂(PO₄)₃/Fe0.5 full cell was assembled, delivering an initial capacity of 0.340 Ah g^?1.     

Realizing Complete Solid‐Solution Reaction in High Sodium Content P2‐Type Cathode for High‐Performance Sodium‐Ion Batteries

P2‐type layered oxides suffer from an ordered Na⁺/vacancy arrangement and P2→O2/OP4 phase transitions, leading them to exhibit multiple voltage plateaus upon Na⁺ extraction/insertion. The deficient sodium in the P2‐type cathode easily induces the bad structural stability at deep desodiation states and limited reversible capacity during Na⁺ de/insertion. These drawbacks cause poor rate capability and fast capacity decay in most P2‐type layered oxides. To address these challenges, a novel high sodium content (0.85) and plateau‐free P2‐type cathode‐Na_0.85Li_0.12Ni_0.22Mn_0.66O₂ (P2‐NLNMO) was developed. The complete solid‐solution reaction over a wide voltage range ensures both fast Na⁺ mobility (10^?11 to 10^?10 cm² s^?1) and small volume variation (1.7 %). The high sodium content P2‐NLNMO exhibits a higher reversible capacity of 123.4 mA h g^?1, superior rate capability of 79.3 mA h g^?1 at 20 C, and 85.4 % capacity retention after 500 cycles at 5 C. The sufficient Na and complete solid‐solution reaction are critical to realizing high‐performance P2‐type cathodes for sodium‐ion batteries.     

Research progress of tunnel-type sodium manganese oxide cathodes for SIBs

Among the large energy storage batteries, the sodium ion batteries（SIBs） are attracted huge interest due to the fact of its abundant raw materials and low cost, and has become the most promising secondary battery. Tunnel-type sodium manganese oxides（TMOs） are industrialized cathode materials because of their simple synthesis method and proficient electrochemical performance. Na_0.44MnO₂（NMO） is considered the best candidate material for all tunnel-type structural materials. ...     

Robust SnO2−x Nanoparticle‐Impregnated Carbon Nanofibers with Outstanding Electrochemical Performance for Advanced Sodium‐Ion Batteries

The sluggish sodium reaction kinetics, unstable Sn/Na₂O interface, and large volume expansion are major obstacles that impede practical applications of SnO₂‐based electrodes for sodium‐ion batteries (SIBs). Herein, we report the crafting of homogeneously confined oxygen‐vacancy‐containing SnO_2?x nanoparticles with well‐defined void space in porous carbon nanofibers (denoted SnO_2?x/C composites) that address the issues noted above for advanced SIBs. Notably, SnO_2?x/C composites can be readily exploited as the working electrode, without need for binders and conductive additives. In contrast to past work, SnO_2?x/C composites‐based SIBs show remarkable electrochemical performance, offering high reversible capacity, ultralong cyclic stability, and excellent rate capability. A discharge capacity of 565 mAh g^?1 at 1 A g^?1 is retained after 2000 cycles.     

Mitigation of Jahn–Teller distortion and Na+/vacancy ordering in a distorted manganese oxide cathode material by Li substitution

Layered manganese-based oxides are promising candidates as cathode materials for sodium-ion batteries (SIBs) due to their low cost and high specific capacity. However, the Jahn–Teller distortion from high-spin Mn³⁺ induces detrimental lattice strain and severe structural degradation during sodiation and desodiation. Herein, lithium is introduced to partially substitute manganese ions to form distorted P′2-Na_0.67Li_0.05Mn_0.95O₂, which leads to restrained anisotropic change of Mn–O bond lengths and reinforced bond strength in the [MnO₆] octahedra by mitigation of Jahn–Teller distortion and contraction of MnO₂ layers. This ensures the structural stability during charge and discharge of P′2-Na_0.67Li_0.05Mn_0.95O₂ and Na⁺/vacancy disordering for facile Na⁺ diffusion in the Na layers with a low activation energy barrier of ∼0.53 eV. It exhibits a high specific capacity of 192.2 mA h g⁻¹, good cycling stability (90.3% capacity retention after 100 cycles) and superior rate capability (118.5 mA h g⁻¹ at 1.0 A g⁻¹), as well as smooth charge/discharge profiles. This strategy is effective to tune the crystal structure of layered oxide cathodes for SIBs with high performance.

Li-Substitution in P′2-Na_0.67MnO₂ mitigates the anisotropic change of Mn–O bonds and Na/vacancy ordering, and hence significantly promotes its cycling stability and rate capability as a cathode material for sodium-ion batteries.     

A Practical High-Energy Cathode for Sodium-Ion Batteries Based on Uniform P2-Na0.7CoO2 Microspheres

Layered metal oxides have attracted increasing attention as cathode materials for sodium-ion batteries (SIBs). However, the application of such cathode materials is still hindered by their poor rate capability and cycling stability. Here, a facile self-templated strategy is developed to synthesize uniform P2-Na_0.7CoO₂ microspheres. Due to the unique microsphere structure, the contact area of the active material with electrolyte is minimized. As expected, the P2-Na_0.7CoO₂ microspheres exhibit enhanced electrochemical performance for sodium storage in terms of high reversible capacity (125 mAh g⁻¹ at 5 mA g⁻¹), superior rate capability and long cycle life (86 % capacity retention over 300 cycles). Importantly, the synthesis method can be easily extended to synthesize other layered metal oxide (P2-Na_0.7MnO₂ and O3-NaFeO₂) microspheres.     

High-Entropy Layered Oxide Cathodes for Sodium-Ion Batteries

Material innovation on high-performance Na-ion cathodes and the corresponding understanding of structural chemistry still remain a challenge. Herein, we report a new concept of high-entropy strategy to design layered oxide cathodes for Na-ion batteries. An example of layered O3-type NaNi_0.12Cu_0.12Mg_0.12Fe_0.15Co_0.15Mn_0.1Ti_0.1Sn_0.1Sb_0.04O₂ has been demonstrated, which exhibits the longer cycling stability (ca. 83 % of capacity retention after 500 cycles) and the outstanding rate capability (ca. 80 % of capacity retention at the rate of 5.0 C). A highly reversible phase-transition behavior between O3 and P3 structures occurs during the charge-discharge process, and importantly, this behavior is delayed with more than 60 % of the total capacity being stored in O3-type region. Possible mechanism can be attributed to the multiple transition-metal components in this high-entropy material which can accommodate the changes of local interactions during Na⁺ (de)intercalation. This strategy opens new insights into the development of advanced cathode materials.     

Thermally activated and non-activated charge transport processes in the oxides NaxMo2

The electrical properties of Na_xM_1+yO₂ (M=Mn,Co) were measured as a function of temperature under conditions of thermodynamic equilibrium for a quenched defect structure. The results of electrochemical studies of Na_xM_1+yO₂ are also presented. A correlation is demonstrated between the structures of the ionic and electronic defects in these materials and the potential changes of the cathode in Na/Na⁺/Na_xM_1+yO₂.The author is grateful to Prof. S. Mrowec and Dr. A. Stoklosa for helpful discussions.     

NASICON结构正极材料用于钠离子电池的研究进展

随着二次电池技术的迅速发展,锂离子电池(LIBs)已经成为了当今社会一种重要的储能装置。然而,地壳中锂资源有限、含锂化合物价格昂贵,因此科研工作者正在积极寻找LIBs的替代品。钠离子电池(SIBs)具有与LIBs相似的工作原理,且钠元素在地球上储量更丰富更均匀、价格更低廉,使得SIBs成为了最有希望替代LIBs的新型二次电池体系之一。不过,钠离子半径较大、充放电过程中电极材料的不可逆性更明显等缺点,明显地增加了开发高性能SIBs的难度。因此,寻找具有优异性能的电极材料,成为了当前SIBs研究的难点和重点。钠超离子导体(NASICON)结构材料是一类具有超快钠离子传导能力的化合物,在脱/嵌钠过程中具有离子传导率高、结构稳定等优点,表现出明显的应用潜力。本文将在介绍NASICON材料晶体结构的基础上,重点从过渡金属种类与个数,以及阴离子调控的角度,总结其研究进展,并分析了该类材料面临的主要问题和挑战。