Multifunctional Active-Center-Transferable Platinum/Lithium Cobalt Oxide Heterostructured Electrocatalysts towards Superior Water Splitting

Designing cost-effective and efficient electrocatalysts plays a pivotal role in advancing the development of electrochemical water splitting for hydrogen generation. Herein, multifunctional active-center-transferable heterostructured electrocatalysts, platinum/lithium cobalt oxide (Pt/LiCoO₂) composites with Pt nanoparticles (Pt NPs) anchored on LiCoO₂ nanosheets, are designed towards highly efficient water splitting. In this electrocatalyst system, the active center can be alternatively switched between Pt species and LiCoO₂ for hydrogen evolution reaction (HER) and oxygen evolution reaction (OER), respectively. Specifically, Pt species are the active centers and LiCoO₂ acts as the co-catalyst for HER, whereas the active center transfers to LiCoO₂ and Pt turns into the co-catalyst for OER. The unique architecture of Pt/LiCoO₂ heterostructure provides abundant interfaces with favorable electronic structure and coordination environment towards optimal adsorption behavior of reaction intermediates. The 30 % Pt/LiCoO₂ heterostructured electrocatalyst delivers low overpotentials of 61 and 285 mV to achieve 10 mA cm⁻² for HER and OER in alkaline medium, respectively.     

In situ decoration of CoP/Ti3C2Tx composite as efficient electrocatalyst for Li-oxygen battery

Application of Li-oxygen (Li-O₂) battery is in urgent need of bifunctional ORR/OER electrocatalyst. A surface-functionalization CoP/Ti₃C₂T_x composite was fabricated theoretically, with the optimized electronic structure and more active electron, which is beneficial to the electrochemical reaction. The accordion shaped Ti₃C₂T_x is featured with large specific surface area and outstanding electronic conductivity, which is beneficial for the adequate exposure of active sites and the deposition of Li₂O₂. Transition metal phosphides provide more electrocatalytic active sites and present good electrocatalytic effect. The CoP/Ti₃C₂T_x composite served as the electrocatalyst of Li-O₂ battery reaches a high specific discharge capacity of 17,413 mAh/g at 100 mA/g and the lower overpotential of 1.25 V, superior to those of the CoP and Ti₃C₂T_x individually. The composite of transition metal phosphides and MXene are applied in Li-O₂ battery, not only demonstrating higher cycling stability of the prepared CoP/Ti₃C₂T_x composite, but pointing out the direction for their electrochemical performance improvement.     

Molybdenum-induced tuning 3d-orbital electron filling degree of CoSe2 for alkaline hydrogen and oxygen evolution reactions

The development of high-performance non-precious metal-based robust bifunctional electrocatalyst for both hydrogen evolution reaction(HER) and oxygen evolution reactions(OER) in alkaline media is essential for the electrochemical overall water splitting technologies. Herein, we demonstrate that the HER/OER performance of Co Se₂ can be significantly enhanced by tuning the 3d-orbital electron filling degree through Mo doping. Both density functional theory(DFT) calculations and experime...     

Non-precious metal-based integrated electrodes for overall alkaline water splitting

A bifunctional electrocatalyst interface requires a superior charge transfer and good electric conductivity to produce an efficient and stable water splitting reaction. In the context of controlling the electrochemical activity of bifunctional catalytic materials, we demonstrate a novel approach to bridge conductive C-Qd-Mn interfaces with precise control. The excellent performance for hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) can be dominantly attributed to the unique structure of C-Qds-Mn, which provides abundant active sites and facilitates electron transfer between electrode and electrolyte. Eco-friendly C-Qds were synthesized using a large-scale thermal assisted technique and utilized as electrocatalysts with Mn₃O₄ in alkaline splitting ToF (Turn over Frequency) calculation to make an effective combination. Due to their increased ECSA, conductivity, and electron-hole transfer, the prepared C-Qds-Mn delivered excellent HER/OER (0.494 V/1.6671V) activity, lower Standard deviation 0.006 V and 0.009V, surpassing the 10 mA limit comparable to commercially.     

Ni3FeN‐Supported Fe3Pt Intermetallic Nanoalloy as a High‐Performance Bifunctional Catalyst for Metal–Air Batteries

Electrocatalysts for both the oxygen reduction and evolution reactions (ORR and OER) are vital for the performances of rechargeable metal–air batteries. Herein, we report an advanced bifunctional oxygen electrocatalyst consisting of porous metallic nickel‐iron nitride (Ni₃FeN) supporting ordered Fe₃Pt intermetallic nanoalloy. In this hybrid catalyst, the bimetallic nitride Ni₃FeN mainly contributes to the high activity for the OER while the ordered Fe₃Pt nanoalloy contributes to the excellent activity for the ORR. Robust Ni₃FeN‐supported Fe₃Pt catalysts show superior catalytic performance to the state‐of‐the‐art ORR catalyst (Pt/C) and OER catalyst (Ir/C). The Fe₃Pt/Ni₃FeN bifunctional catalyst enables Zn–air batteries to achieve a long‐term cycling performance of over 480 h at 10 mA cm⁻² with high efficiency. The extraordinarily high performance of the Fe₃Pt/Ni₃FeN bifunctional catalyst makes it a very promising air cathode in alkaline electrolyte.     

Self-Assembled Two-Dimensional NiO/CeO2 Heterostructure Rich in Oxygen Vacancies as Efficient Bifunctional Electrocatalyst for Alkaline Hydrogen Evolution and Oxygen Evolution

The development of high-efficiency bifunctional electrocatalysts toward the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) in alkaline surroundings is essential and challenging for the large-scale generation of clean hydrogen. Herein, a novel self-assembled two-dimensional (2 D) NiO/CeO₂ heterostructure (HS) consisting of NiO and CeO₂ nanocrystals is prepared through a facile two-step approach, and utilized as an enhanced bifunctional electrocatalyst for the HER and OER under alkaline conditions. It is concluded that this 2 D NiO/CeO₂ HS, rich in oxygen vacancies, demonstrates attractive electrocatalytic properties for both the HER and OER in 1 m KOH, including low onset overpotential (η₁), η₁₀ and Tafel slope, excellent durability, as well as large active surface area. Therefore, the self-assembled 2 D NiO/CeO₂ HS is believed to be an efficient bifunctional electrocatalyst toward the HER and OER.     

Multifunctional Active‐Center‐Transferable Platinum/Lithium Cobalt Oxide Heterostructured Electrocatalysts towards Superior Water Splitting

Designing cost‐effective and efficient electrocatalysts plays a pivotal role in advancing the development of electrochemical water splitting for hydrogen generation. Herein, multifunctional active‐center‐transferable heterostructured electrocatalysts, platinum/lithium cobalt oxide (Pt/LiCoO₂) composites with Pt nanoparticles (Pt NPs) anchored on LiCoO₂ nanosheets, are designed towards highly efficient water splitting. In this electrocatalyst system, the active center can be alternatively switched between Pt species and LiCoO₂ for hydrogen evolution reaction (HER) and oxygen evolution reaction (OER), respectively. Specifically, Pt species are the active centers and LiCoO₂ acts as the co‐catalyst for HER, whereas the active center transfers to LiCoO₂ and Pt turns into the co‐catalyst for OER. The unique architecture of Pt/LiCoO₂ heterostructure provides abundant interfaces with favorable electronic structure and coordination environment towards optimal adsorption behavior of reaction intermediates. The 30 % Pt/LiCoO₂ heterostructured electrocatalyst delivers low overpotentials of 61 and 285 mV to achieve 10 mA cm^?2 for HER and OER in alkaline medium, respectively.     

Synthesis of a Hierarchically Porous C/Co3O4 Nanostructure with Boron Doping for Oxygen Evolution Reaction

Fabricating a low‐cost and highly efficient electrocatalyst is of importance for the development of renewable energy devices. In this work, we have synthesized an ultrafine cobalt oxide nanocatalyst (5–10 nm) doped with boron (BC/Co₃O₄) by using a metal–organic framework as a precursor, which exhibits an excellent catalytic activity for oxygen evolution reaction (OER). Owing to the improvement of accessible active sites by boron doping, the synthesized catalyst can reach a current density of 10 mA cm^?2 at 1.54 V with a low overpotential of 310 mV, superior than those of commercial RuO₂ and N‐doped C/Co₃O₄. This work provides a facile way to develop highly efficient catalysts for electrochemical reactions.     

Ice/Salt-Assisted Synthesis of Ultrathin Two-Dimensional Micro/Mesoporous Iron and Nitrogen Co-Doped Carbon as an Efficient Electrocatalyst for Oxygen Reduction

An ice/salt-assisted strategy has been developed to achieve the green and efficient synthesis of ultrathin two-dimensional (2D) micro/mesoporous carbon nanosheets (CNS) with the dominant active moieties of Fe−N₄ (Fe-N-CNS) as high-performance electrocatalysts for the oxygen reduction reaction (ORR). The strategy involves freeze-drying a mixture of iron porphyrin and KCl salt using ice as template followed by a confined pyrolysis with KCl as an independent sealed nanoreactor to facilitate the formation of 2D carbon nanosheets, N incorporation, and porosity creation. The well-defined assembly of ultrathin 2D carbon nanosheets ensures high utilization of D1 and D3 Fe−N₄ active sites, and effectively promotes the mass transport of ORR reactants by virtue of the pronounced mesoporous structure. The resulting Fe-N-CNS electrocatalyst was shown to exhibit superior ORR activity, better electrochemical durability, and methanol tolerance towards ORR in alkaline electrolyte relative to the commercial Pt/C electrocatalyst.     

Gelatin-Derived 1D Carbon Nanofiber Architecture with Simultaneous Decoration of Single Fe−Nx Sites and Fe/Fe3C Nanoparticles for Efficient Oxygen Reduction

Exploring high-performance non-precious-metal electrocatalysts for the oxygen reduction reaction (ORR) is critical. Herein, a scalable and cost-effective strategy is reported for the construction of one-dimensional carbon nanofiber architectures with simultaneous decoration of single Fe−N_x sites and highly dispersed Fe/Fe₃C nanoparticles for efficient ORR, through the Fe^III-complex-assisted electrospinning of gelatin nanofibers with subsequent pre-oxidation and carbonization. Results show that the presence of a Fe^III complex enables the 1D gelatin nanofibers to be well retained during the pre-oxidation process. Owing to the distinct 1D nanofiber structure and the synergistic effect of Fe/Fe₃C and Fe−N_x sites, the resulting electrocatalyst is highly active for ORR with a half-wave potential of 0.885 V (outperforming commercial Pt/C) and a superior electrochemical stability in alkaline electrolytes. Similarly, it also shows a high power density (144.7 mW cm⁻²) and a superior stability in Zn-air batteries. This work opens a path for the design and synthesis of 1D carbon electrocatalyst for efficient ORR catalysis.     

Iron-Doped Nickel Molybdate with Enhanced Oxygen Evolution Kinetics

Electrochemical water splitting is one of the potential approaches for making renewable energy production and storage viable. The oxygen evolution reaction (OER), as a sluggish four-electron electrochemical reaction, has to overcome high overpotential to accomplish overall water splitting. Therefore, developing low-cost and highly active OER catalysts is the key for achieving efficient and economical water electrolysis. In this work, Fe-doped NiMoO₄ was synthesized and evaluated as the OER catalyst in alkaline medium. Fe³⁺ doping helps to regulate the electronic structure of Ni centers in NiMoO₄, which consequently promotes the catalytic activity of NiMoO₄. The overpotential to reach a current density of 10 mA cm⁻² is 299 mV in 1 m KOH for the optimal Ni_0.9Fe_0.1MoO₄, which is 65 mV lower than that for NiMoO₄. Further, the catalyst also shows exceptional performance stability during a 2 h chronopotentiometry testing. Moreover, the real catalytically active center of Ni_0.9Fe_0.1MoO₄ is also unraveled based on the ex situ characterizations. These results provide new alternatives for precious-metal-free catalysts for alkaline OER and also expand the Fe-doping-induced synergistic effect towards performance enhancement to new catalyst systems.     

Fe/Co‐based Bimetallic MOF‐derived Co3Fe7@NCNTFs Bifunctional Electrocatalyst for High‐Efficiency Overall Water Splitting

Electrocatalytic water splitting to produce hydrogen and oxygen is regarded as one of the most promising methods to generate clean and sustainable energy for replacing fossil fuels. However, the design and development of an efficient bifunctional catalyst for simultaneous generation of hydrogen and oxygen remains extremely challenging yet is critical for the practical implementation of water electrolysis. Here, we report a facile method to fabricate novel N‐doped carbon nanotube frameworks (NCNTFs) by the pyrolysis of a bimetallic metal organic framework (MIL‐88‐Fe/Co). The resultant electrocatalyst, Co₃Fe₇@NCNTFs, exhibits excellent oxygen evolution reaction (OER) activity, achieving 10 mA/cm² at a low overpotential of just 264 mV in 1 M KOH solution, and 197 mV for the hydrogen evolution reaction. The high electrocatalytic activity arises from the synergistic effect between the chemistry of the Co₃Fe₇ and the NCNTs coupled to the novel framework structure. The remarkable electrocatalytic performance of our bifunctional electrocatalyst provides a promising pathway to high‐performance overall water splitting and electrochemical energy devices.     

Boosting Electrocatalytic Oxygen Evolution over Ce−Co9S8 Core–Shell Nanoneedle Arrays by Electronic and Architectural Dual Engineering

An dual electronic and architectural engineering strategy is a good way to rationally design earth-abundant and highly efficient electrocatalysts of the oxygen evolution reaction (OER) for sustainable hydrogen-based energy devices. Here, a Ce-doped Co₉S₈ core–shell nanoneedle array (Ce−Co₉S₈@CC) supported on a carbon cloth has been designed and developed to accelerate the sluggish kinetics of the OER. Profiting from valance alternative Ce doping, a fine core–shell structure and vertically aligned nanoneedle arrayed architecture, Ce−Co₉S₈@CC integrates modulated electronic structure, highly exposed active sites, and multidimensional mass diffusion channels; together, these afford a favorable catalyzed OER. Ce−Co₉S₈@CC exhibits remarkable performance in the OER in an alkaline medium, where the overpotential requires only 242 mV to deliver a current density of 10 mA cm⁻² for the OER; this is 70 mV superior to that of Ce-free Co₉S₈ catalyst and other counterparts. Good stability and impressive selectivity (nearly 100 % Faradic efficiency) are also demonstrated. When integrated into a two-electrode OER//HER electrolyzer, the as-prepared Ce−Co₉S₈@CC displays a low operation potential of 1.54 V at 10 mA cm⁻² and long-term stability, thus demonstrating great potential for economical water electrolysis.     

SrNb0.1Co0.7Fe0.2O3−δ Perovskite as a Next‐Generation Electrocatalyst for Oxygen Evolution in Alkaline Solution

The perovskite SrNb_0.1Co_0.7Fe_0.2O_3?δ (SNCF) is a promising OER electrocatalyst for the oxygen evolution reaction (OER), with remarkable activity and stability in alkaline solutions. This catalyst exhibits a higher intrinsic OER activity, a smaller Tafel slope and better stability than the state‐of‐the‐art precious‐metal IrO₂ catalyst and the well‐known BSCF perovskite. The mass activity and stability are further improved by ball milling. Several factors including the optimized e_g orbital filling, good ionic and charge transfer abilities, as well as high OH^? adsorption and O₂ desorption capabilities possibly contribute to the excellent OER activity.     

A Supramolecular Coordination-Polymer-Derived Electrocatalyst for the Oxygen Evolution Reaction

An iron oxide decorated nickel iron alloy nanoparticle/porous graphene hybrid exhibits high electrocatalytic activity and excellent durability toward oxygen evolution reaction (OER). It displays a low overpotential of 274 mV at 10 mA cm⁻², and low Tafel slope of 37 mV dec⁻¹, showing a superior performance to the state-of-the-art RuO₂ OER electrocatalyst.     

Hollow Nanotube Ru/Cu2+1O Supported on Copper Foam as a Bifunctional Catalyst for Overall Water Splitting

Hydrogen energy is considered as one of the ideal clean energies for solving the energy shortage and environmental issues, and developing highly efficient electrocatalysts for overall water splitting to produce hydrogen is still a huge challenge. Herein, for the first time, Ru-doped Cu₂₊₁O vertically arranged nanotube arrays in situ grown on Cu foam (Ru/Cu₂₊₁O NT/CuF) are reported and further investigated for their catalytic properties for overall water splitting. The Ru/Cu₂₊₁O NT/CuF presents ultrahigh catalytic activities for both the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) in alkaline conditions, and it exhibits a small overpotential of 32 mV at 10 mA cm⁻² in the HER, and only needs 210 mV overpotential to achieve a current density of 10 mA cm⁻² in the OER. Importantly, the alkaline electrolyzer using Ru/Cu₂₊₁O NT/CuF as a bifunctional electrocatalyst only needs 1.53 V voltage to deliver a current density of 10 mA cm⁻², which is much lower than the benchmark of IrO₂(+)/Pt(−) counterpart (1.64 V at 10 mA cm⁻²). The excellent performance of the Ru/Cu₂₊₁O NT/CuF catalyst is attributed to its high conductive substrate and special Ru-doped nanotube structure, which provides a high electrochemical active surface area and 3D gas diffusion channel.     

Heterogeneous Cu1.92S@Cu3P/Ni2P Nanospheres on Nickel Foam for Effective Electrocatalytic Oxygen Evolution Reaction**

The design and exploration of highly efficient and economical electrocatalysts for large-scale hydrogen generation from electrochemical water splitting is of great importance towards hydrogen economy. Herein, we have synthesized heterogeneous Cu_1.92S@Cu₃P/Ni₂P nanospheres on nickel foam, which exhibits excellent OER activity in alkaline solution. When used as an anode, the overpotential of Cu_1.92S@Cu₃P/Ni₂P at the current density of 10 mA cm⁻² is only 211 mV, with a good stability (24 h). The heterogeneous Cu_1.92S@Cu₃P/Ni₂P nanospheres has synergistic modulation of electronic structure, abundant active sites and fast electron transfer rate, which contributes to its high OER activity.     

Heterometallic Feed Ratio-Dominated Oxygen Evolution Activity in Self-Supported Metal-Organic Framework Nanosheet Arrays Electrocatalyst

Developing earth-abundant, highly active and long-term durable electrocatalysts for oxygen evolution reaction (OER) is highly desirable and great challenging for large-scale industrial application of electrochemical water splitting. Herein, in-situ growth of uniform nanosheet arrays on nickel foam (NF) is hydrothermally achieved by varying feed ratios of Fe^III and Ni^II salts. The feed ratio of the two active metals has significantly dominated both the morphological and electronic structures of the resultant electrocatalysts, leading to feed ratio-dependent volcano-type OER activity. The optimized Fe_0.89Ni_0.11-BDC/NF exhibits the best OER performance, affording a low overpotential of 220 mV to drive a current density of 50 mA · cm^–2 with small Tafel slope of 44.8 mV · dec^–1 and long-lasting stability over 20 hours. The synergistic effect from the Fe^III and Ni^II species on both the morphological and electronic structure modulations have dramatically accelerated the reaction kinetics, responsible eventually for the enhanced OER activity. This work provides valuable information for nanostructured MOFs as efficient electrocatalysts.     

Phase-mediated cobalt phosphide with unique core-shell architecture serving as efficient and bifunctional electrocatalyst for hydrogen evolution and oxygen reduction reaction

Hydrogen evolution reaction (HER) and oxygen reduction reaction (ORR) have been considered as two critical processes in the field of electrocatalytic water-splitting for hydrogen production and fuel cells. However, the sluggish reaction kinetics of HER and ORR required efficient electrocatalyst such as Pt to promote such process. Transition metal phosphides (TMPs) exhibit great potential to replace noble metal electrocatalysts to accelerate HER and ORR due to their high activity and easy availability. Herein, a highly-efficient bifunctional CoP electrocatalyst for HER and ORR, featuring a unique core-shell structure decorated on nitrogen-doped carbon matrix was designed and constructed via etching a cobalt-based zeolitic imidazolate framework (ZIF-67) with phytic acid (PA) followed by pyrolysis treatment (PA-ZIF-67–900). Experimental results revealed that the pure-phase single-crystalline CoP exhibited outstanding electrocatalytic performance in HER and ORR, superior to Co(PO₃)₂ in PA-ZIF-67–700, hybrid phase of Co(PO₃)₂ and CoP in PA-ZIF-67–800 and Co₂P-doped CoP in PA-ZIF-67–1000. To reach the current density of 10 mA/cm² the as-synthesized CoP required an overpotential of 120 mV for HER in 1 mol/L KOH and half-wave potential of 0.85 V in O₂-saturated 0.1 mol/L KOH. This work present new clue for construction of efficient and bifunctional electrocatalyst in the field of energy conversion and storage     

In Situ Electrochemical Conversion of an Ultrathin Tannin Nickel Iron Complex Film as an Efficient Oxygen Evolution Reaction Electrocatalyst

The oxygen evolution reaction (OER) is an important half reaction in many energy conversion and storage techniques. However, the development of a low‐cost easy‐prepared OER electrocatalyst with high mass activity and rapid kinetics is still challenging. Herein, we report the facile deposition of tannin‐NiFe (TANF) complex film on carbon fiber paper (CP) as a highly efficient OER electrocatalyst. TANF gives rapid OER reaction kinetics with a very small Tafel slope of 28 mV dec^?1. The mass activity of TANF reaches 9.17×10³ Ag^?1 at an overpotential of 300 mV, which is nearly 200‐times larger than that of NiFe double layered hydroxide. Furthermore, tannic acid in TANF can be electrochemically extracted under anodic potential, leaving the inorganic composite Ni_xFe_1?xO_yH_z as the OER‐active species. This work may provide a guide to probing the electrochemical transformation and investigating the reactive species of other metal–organic complexes as heterogeneous electrocatalysts.