Studies on the Syntheses of the Side Chains of Brassinolide and Dolicholide

(4R,5S)-2,2-Dimethyl-4-(1',2'-dimethylpropyl)-5-(1'-bromoethyl)--1,3-dioxolane(15) with the side chain of brassinolide and (4R, 5S)--2, 2-dimethyl-4-(l'-methylene-2'-methylpropyl)-5-(1'-bromoethyl) 1,3-dioxolane(14) with the side chain of dolicholide were first synthesized through 11 and 10 stepes from D-mannitol respectively. All of the intermediates 7-13 were first synthesized too.     

Structural Characterization of Poly(α-Fluoroacrylonitrile) and Poly(Ethyl α-Fluoroacrylate)

Abstract

Monomers α-fluoroacrylonitrile (FAN) and ethyl α-fluoroacrylate (EFA) and homopolymers poly(α-fluoroacrylonitrile) (PFAN) and poly-(ethyl α-fluoroacrylate) (PEFA) have been synthesized and spectroscopi-cally characterized in detail for the first time. The ¹³C- and ¹⁹F-NMR spectroscopic results are reported, and the results are correlated to the tacticity and microstructure of both homopolymers. The major portion of the polymers is atactic. TGA analysis of PFAN indicates that the polymer is stable to about 200°C with subsequent loss of HF. PEFA is stable to 300 °C. Molecular weights determined by intrinsic viscosity (M_v ) are found to be about 130,000 for PFAN, and GPC analysis of PEFA indicates a molecular weight (M_n ) of about 36,000. Dielectric permittivities (ε) for PFAN and PEFA were determined to be 8.9 and 4.0, respectively, at 50 Hz.     

Effect of γ-Radiation on the Structural and Conducting Properties of Copper Nanotubes

The influence of γ-radiation on the structural and conducting properties of copper nanotubes, obtained by electrochemical synthesis in pores of on polyethylene terephthalate-based template matrices, has been studied. With the use of scanning electron microscopy, X-ray diffraction analysis, and electron diffraction analysis, it has been established that irradiation with γ-rays at doses of 50 and 100 kGy makes it possible to modify the crystal structure of the nanotubes, increasing their conductivity and decreasing the resistance of the nanosized entities without destroying their structure.     

Studies on the Model Synthesis of the Brassinolide and Dolicholide Side Chains

A stereoselective synthesis of brassinolide and dolicholide, which involves construction of the side chain enantiomers by a highly stereoselective aldol reaction of aldehyde 5 with the anion of a-silyloxy ketone 6 is described.     

Effect of Molecular Weight on the Properties of Poly（butylene succinate）

Poly（butylene succinate） （PBS） with different molecular weight was synthesized from 1, 4-butanediol and succinic acid by direct melt condensation. The synthesized PBS was identified by IH-NMR and FTIR spectrometry. The molecular weight was calculated from the intrinsic viscosity, and its value was between 20000 and 70000. The crystallization behavior and crystal morphology as function of molecular weight were investigated by DSC and PLM, respectively. The mechanical properties and hydrolytic degradation behaviors related with change of molecular weight were also studied in this work. The results demonstrated that the properties of PBS were determined by both molecular weight and crystallization properties （crystallinity as well as crystal morphology）. Our work is important for the design and preparation of PBS with proper molecular weight for its practical application.     

Studies on the Model Synthesis of the Brassinolide and Dolicholide‘s Side Chains

A highly stereoselective synthesis of the side Chain enantiomers of brassinolide and dolicholide through an aldol reaction of 2-(4-methoxy benzyloxyl) proplonylaldehyde (5) with the anion of 1- ( tert -butyldimethylsiloxy )-3-methyl-2-butanone ( 6 ) is described.     

Polystyrene–Polyperfluorooctylethyl acrylate Diblock Copolymers: The Effect of Dilution of the Fluorinated Mesogenic Chains on Bulk and Surface Properties

Summary : Three smectic poly(styrene-b-perfluorooctylethyl acrylate) block copolymers (S-b-AF8) with different degrees of polymerization (n, m) of the relative blocks were synthesized by atom transfer radical polymerization (S, n = 25; AF8 m = 2, 6, 23). The mesophase structure and transition temperatures were investigated by DSC and WAXD. The block copolymer having the shortest fluorinated block was blended with a thermoplastic elastomer SEBS in different proportions, in order to look at the effect of a further dilution of the perfluorinated groups on non-wetting properties. Thin films of the block copolymers as well as the blends exhibited large contact angles with both water and n-hexadecane, which resulted in low solid surface tensions. XPS findings at different photoemission angles confirmed the effective surface segregation of the mesogenic chains of the fluorinated polymer block.     

The Effect of Cd on the Electrochromic Properties of NiO_xH_y film

ElectrochrondcmaterialshavebeenattractingmoreandmoreattentionbecauseoftheirusefulnessonSmartWindows'.Byharnessingthesolarradiationtobuildingsorautomobileinteriors,onecanmodifytheilluminationandheatgainedandconvertitintoenergytoimprovecomfort,bytakingadvantageofthelowpowerrequirementSofelectrochromicmaterials.Amongthesematerials,Nio.H,isthemostpromisingduetoitShighcoloringefficiency,lowmaterialcost,highstability,andinparticular,its"grayeffectlll'2.Inaddition,Nio.H,isalsousedwidelyasapositive…     

Redox-responsive Inclusion Complexation between β-Cyclodextrin and Ferrocene-functionalized Poly(N-isopropylacrylamide) and its Effect on the Solution Properties of this Polymer

Ferrocene-functionalized polymers (poly(NIPAM/FCN)) and their β-CD (β-Cyclodextrin) complex have been prepared. The inclusion complexation between them was investigated by several techniques, including ¹H NMR spectra, cyclic voltammetry, UV–vis spectra and dynamic light scattering measurements. The results showed that β-CD could interact with the reduced ferrocene side groups and hardly affect the oxidized form. Thus a redox-responsive inclusion complexation system based on β-CD and poly(NIPAM/FCN) was obtained. In addition, the effect of this inclusion complexation on the solution properties of this polymer was also investigated. LCST (lower critical solution temperature) increased and the viscosity decreased upon addition of β-CD into the reduced polymer solution due to the disruption of the hydrophobic interaction between the ferrocene side groups by the inclusion complexation. Yet LCST and viscosity of the oxidized polymer solution changed slightly, which resulted from the weak interaction exerted by β-CD.     

The Effect of the Isocyanate–Hydroxyl Ratio on the Structure and Properties of Hard Polyurethanes

A comprehensive study has been carried out of the structure and rheological and physicomechanical properties of low-temperature curing polyurethane compositions based on polyisocyanate and a blend of hydroxyl-containing oligomers of different reactivity. The maximum curing rate and strength parameters (tensile strength and Young’s modulus) have been shown to be achieved at the ratio of the reacting groups NCO : OH = 1.1.     

Synthesis,Thermal Properties,and Radiolysis of Poly(Cyclohexyl α-Chloroacrylate)

Cyclohexyl α-chloroacrylate (CCA) was polymerized by radical anionic and γ-radiation initiation. The anionic polymerization of cyclohexyl α-chloroacrylate gave moderately isotactic polymer in toluene and syndiotactic-rich polymer in THF. Poly(cyclohexyl α-chloroacrylate) (PCCA) was found to undergo two-stage weight loss in thermogravimetric analysis, and the first-stage weight loss was attributed to the lactonization reaction. PCCA degraded under γ-radiation, and the radiation yields of crosslinking and scission, G _x and G _s, were 0.6 and 3.8, respectively.     

Substituents Effect on the Optical Properties of Benzonitrile and Oligobenzonitriles

During the past decades, the organic systems with good electronic and optical property,such as oligomer and polymers, have been attracted much attention because of theiroptical nonlinearity, fast response, relatively low cost, ease of fabrication and integrationinto devices. Generally to say, the common oligomers or polymers that we usually studyare all of carbon-carbon or heteroaromatic conjugated system. In previous work, thesynthesis of new linear -(C=N).- conjugated systems, polynitriles h…     

Synthesis and Properties of Poly(Aryl Ether Ketone) Copolymers with Trifluoromethyl‐Substituted Benzene in the Side Chain

The new monomer (4‐(4′‐trifluoromethyl)phenoxyphenyl)hydroquinone (TFPOPH) was synthesized in a three‐step synthesis. A series of poly(aryl ether ketone) copolymers were prepared by the reaction of (4‐(4′‐Trifluoromethyl)phenoxyphenyl)hydroquinone and hydroquinone (HQ) with 4,4′‐difluorobenzophenone (DFB) in the presence of potassium carbonate in tretramethylene sulfone (TMS). Thermal analyses of the fluorinated copolymers showed that the glass transition temperature and 5.0% weight loss temperature are similar with that of PEEK, and the crystallinity decreased with increasing of TFPOPH. For the copolymer synthesized with the molar fraction of TFPOPH in the diphenol monomers (TFPOPH, HQ) being over 0.2, no cold crystallization temperature and melting temperature were detected, indicating that these copolymers are almost amorphous. The crystal structure of the copolymers with the molar fraction of TFPOPH being not higher than 0.2 is rhombic. The solubility in polar aprotic solvents of poly(aryl ether ketone)s copolymers increases and dielectric constant decreases step by step.     

Effects of Chain Ends on Thermal and Mechanical Properties and Recyclability of Poly(γ-butyrolactone)

This work investigates effects of poly(γ-butyrolactone) (PγBL) with different initiation and termination chain ends on five types of materials properties, including thermal stability, thermal transitions, thermal recyclability, hydrolytic degradation, and dynamic mechanical behavior. Four different chain-end-capped polymers with similar molecular weights, BnO-[C(=O)(CH₂)₃O]_n-R, R = C(=O)Me, C(=O)CH=CH₂, C(=O)Ph, and SiMe₂CMe₃, along with a series of uncapped polymers R′O-[C(=O)(CH₂)₃O]_n-H (R′ = Bn, Ph₂CHCH₂) with M_n ranging from low (4.95 kg mol⁻¹) to high (83.2 kg mol⁻¹), have been synthesized. The termination chain end R showed a large effect on polymer decomposition temperature and hydrolytic degradation, relative to H. Overall, for those properties sensitive to the chain ends, chain-end capping renders R-protected linear PγBL behaving much like cyclic PγBL. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 2271–2279     

Impact of Zn(Ⅱ) Ions on Crystallization and Thermal Properties of Poly(lactic acid)

The issues of low crystallinity and slow crystallization rate of poly(lactic acid) (PLA) have been widely addressed. In this work, we find that doping PLA with Zn(Ⅱ) ions can speed up the process of crystallization of PLA. Three kinds of Zn(Ⅱ) salts (ZnCl\begin{document}$ _2 $\end{document}, ZnSt and ZnOAc) were tested in comparison with some other ions such as Mg(Ⅱ) and Ca(Ⅱ). The increased crystallinity and crystallization rate of PLA doping with Zn(Ⅱ) are reflected in FT-IR and variable temperature Raman spectroscopy. The crystallinity is further confirmed or measured with differential scanning calorimetry and X-ray diffraction. The crystallinity rate of the PLA/ZnSt-0.4 wt% material can reach 22.46% and the crystallinity rate of the PLA/ZnOAc-0.4 wt% material can reach 24.83%, as measured with differential scanning calorimetry.     

The Preparation and Properties of Some α-Acyloxy- and α-Carbamoyloxy-Phosphonothionates

New f -acyloxy and f -carbamoyloxy derivatives of dimethyl 2,2,2-trichloroethyl-phosphonothionate have been prepared, characterized, and screened for activity against free-living soil nematodes. Several of the more easily hydrolysable esters, and also the N -methylcarbamoyl derivative, were as active as the parent pesticide, dimethyl f -hydroxy-2,2,2-trichloroethylphosphonothionate, after an induction period during which the active species is assumed to be released in vivo . It is concluded that the 2,2,2-trichloroethyl group is essential for activity in compounds of these types and that the presence of the N -methylcarbamoyl group does not in itself confer activity.     

Synthesis and Microphase Separation Behavior of Random,Mixed Cylindrical Brush Copolymers Bearing Polystyrene and Poly(ε-caprolactone) Side Chains

A series of mixed, random cylindrical brush copolymers bearing polystyrene(PS) and poly(ε-caprolactone)(PCL) side chains were synthesized via the combination of ring-opening polymerization(ROP) and atom transfer radical polymerization(ATRP). These novel cylindrical brush copolymers have been characterized by means of nuclear magnetic resonance(NMR) spectroscopy, gel permeation chromatography(GPC) and differential scanning calorimetry(DSC). It was found that the mikto-armed cylindrical brush copolymers were microphase-separated in bulks and that the morphologies were dependent on the mass ratios of PS to PCL side chains. One of the cylindrical brush copolymers was employed to incorporate into epoxy thermoset to investigate effect of the mikto-armed cylindrical brush architecture on the reaction-induced microphase separation behavior. Depending on the concentration of the cylindrical brush in epoxy, the thermosets can display the morphologies with the spherical, worm-like and lamellar PS microdomains dispersing in continuous thermosetting matrices.     

The Effect of Boron on the Properties of Glucomannan： An Experimental and Molecular Dynamics Simulation Study

1 INTRODUCTION gel using KGM and borax at 60 ℃, which can be used as slow-released reagent of theophylline and Generally, the mixture of Konjac Glucomanan dibucaine. And Hogi Tsuneo utilized KGM and tetra- (KGM) and salts that could be hydrolyzed to form valent boric acid to prepare artificial crystal[1]. This multi-hydroxyl hydrates leads to the generation of kind of crystal has good light transmission property, gelatum. Among the familiar salts, such as borate, elasticity, intensi…     

Theoretical Investigation on the Luminescent Properties of Polyfluorene and Poly（fluorene-co-thiophene）

The density functional theory was employed to study the structures, ionization potentials(IPs), electron affinities(EAs), and HOMO-LUMO gaps(ΔH-L) of the oligomers. The time-dependent density functional theory(TD-DFT) and ZINDO were employed to study the lowest excitation energies(Egs) and the absorption and emission spectra of the oligomers of polyfluorene(PF) and poly(fluorene-co-thiophene)(PFT). By extrapolating ΔH-L and Egs to those of infinite chain length, band gaps and effective conjugation lengths o...     

The Regulation Effect of Phosphoryl Group on Amino Acid Side Chain

The amino acids' side chains act as the relay device to modulate the chemical reactivity of the N-phosphoryl amino acids. The N-dialkyl phosphoryl cysteine is stable, but the N-dialkyl phosphoryl serine or threoine was converted into many kinds of products at 40℃. The N-dialkyl phosphoryl gltamic acid is a stable compound, while the N-dislkyl phosphoryl aspartic acid was transferred into the peptides, esters and the phosphoryl ester-exchanged products under mild conditions. The N-dialkyl phosphoryl histidine has the similar reactivity through the co-participation of the side chain, carboxyl and phosphoryl groups. A hexacoordinate phosphorus was proposed to account for this differentiation and promotion effect.