Enantioselective Cross-couplings between Halide Derivatives and Organometallics by Using Iron and Cobalt Catalysts: Formation of C−C Bonds

This review highlights the recent achievements of iron- and cobalt-catalyzed enantioselective cross-couplings of halide derivatives with organometallic reagents for the construction of C-C bonds. Synthetic applications of enantioselective cross-couplings to natural products and biologically active compounds are also covered showing the power of these cross-couplings in organic synthesis.     

A Constrained and “Inverted” [3+3] Salphen Macrocycle with an ortho-Phenylethynyl Substitution Pattern

A [3+3] Schiff-base salphen macrocycle ( 7 a ) was synthesized by imine condensation between ortho-phenylenediamine and ortho-phenylethynyl-bridged bis(5-salicylaldehyde) precursors. The triangular-shaped macrocycle 7 a has a nonclassical (or “inverted”) design in which the N₂O₂ coordination pockets are located at the sides instead of the corners. Compound 7 a could be synthesized in a reasonably good yield (64 %) considering the steric constraints imposed by the ortho substitution pattern. Subsequent zinc metalation afforded the corresponding Zn metallomacrocycle 7 b . Spectroscopic experiments evidenced weak ( 7 a ) to strong ( 7 b ) self-aggregation behavior in solution. Their ability to self-organize at the supramolecular level was further studied in the solid state by AFM and TEM, which revealed the formation of large bundles of fibers with lengths of several micrometers and widths of nanometers.     

Erratum to: “Asymmetric Calix[4]-thiacalix[4]arene Tubes: Synthesis and Ionophore Properties”

Russian Journal of Organic Chemistry -     

Extracting [Pd@Sn9]4– and [Rh@Pb9]4– Clusters from their Binary Alloys Using “Metal Scissors”

The search for novel ternary intermetallic compounds with specific structures is still a challenge. We found that the two-step synthesis giving a typical alloy in the first step followed by the reaction of this alloy with alkali metals is a promising route. The intermetallic compounds K₁₂Pd_0.47Sn₁₇ and K₄RhPb₉ were synthesized by high-temperature reactions of preformed Pd-Sn and Rh-Pb alloys with K acting as “metal scissors” and were characterized by means of single crystal and powder X-ray diffractometry. The salt-like ternary phases K₁₂Pd_0.47Sn₁₇ and K₄RhPb₉ contain novel endohedrally filled intermetalloid clusters [Pd@Sn₉]^4– and [Rh@Pb₉]^4–, respectively. The crystal packing of the products corresponds to filled variants of the binary Zintl phases K₁₂Sn₁₇ and K₄Pb₉, respectively. The crystal structure of K₁₂Pd_0.47Sn₁₇ can be regarded as a hierarchical replacement variant of the hexagonal Laves phase MgZn₂, with [Pd@Sn₉]^4–/[Sn₉]^4– and [Sn₄]^4– on Mg and Zn positions, respectively, whereas the packing of [Rh@Pb₉]^4– clusters in K₄RhPb₉ is hcp. K₁₂Pd_0.47Sn₁₇ was characterized by Raman spectroscopy. For the first time Raman modes typical for endohedrally filled [Pd@Sn₉]^4– clusters are observed and in accordance with quantum-chemical calculations. In addition Raman spectroscopy shows also the presence of filled Pd@Sn₉ clusters in a phase of nominal composition “Na₁₂Pd₂Sn₁₇”. The results are discussed with respect to the volume increase due the incorporation of transition metal atoms.     

The unusual stability of [NpO2Cl4]2−: Synthesis and characterisation of [NpO2(DPPMO2)2Cl]2[NpO2Cl4] and [Ph3PNH2]2[NpO2Cl4]

The [NpO₂(DPPMO₂)₂Cl][NpO₂Cl₄] complex (where DPPMO₂ = bis(diphenylphosphino)methanedioxide) contains the linear neptunyl group, {NpO₂}²⁺, with two bidentate P=O donor ligands. Coordinating anion Cl^? fills the fifth equatorial coordination site yielding a complex of general formula [NpO₂(DPPMO₂)₂X]₂[Y] (1) (where X = Cl^? and Y = [NpO₂Cl₄]^2?. Reaction between our newly prepared neptunium starting material [NpO₂Cl₂(thf)]_n and phosphinimine ligand produced crystals of [Ph₃PNH₂]₂[NpO₂Cl₄] (2). Compounds 1 and 2 have been structurally characterised.     

The synthesis and molecular recognition study of β-cyclodextrin derivatives modified by spiro[2H-benzopyran-2,2′-indoline]

Introduction

Encapsulation of rifampicin by β-cyclodextrin and its methyl and hydroxy-propyl derivatives was studied in solid and solution phase.

Materials and Methods

The inclusion phenomenon was evidenced by differential scanning calorimetry (DSC), powder X-ray diffraction (PXRD) analysis and fourier-transform infrared (FT-IR) spectroscopy and supplemented by proton nuclear magnetic resonance (¹H-NMR) spectroscopy. The host–guest stoichiometry (1:1) and stability constant were determined by solution calorimetry.

Results

The inclusion of drug was found to be exothermic process accompanied by small negative value of Gibbs free energy (ΔG°) and small positive value of entropy (ΔS°).

Conclusion

The magnitude of equilibrium constant (K) indicates that methyl-β-cyclodextrin has the best complex formation ability. Solubility, dissolution and partition coefficient studies also support the most effective behavior of methyl-β-cyclodextrin.     

Fast Heroin and Cocaine Analysis by GC–MS with Cold EI: The Important Role of Flow Programming

A fast GC–MS method was developed based on the use of GC–MS with Cold EI. This new method was applied for the analysis of the street drugs heroin and cocaine and it enabled 2 min chromatography time and 3 min full analysis cycle time. GC–MS with cold EI provides mass spectra with enhanced molecular ions that are library compatible (with increased identification probabilities) and allows the use of short, 5 m 0.25 mm ID columns, which facilitates fast GC–MS. A central ingredient of our unique cold EI-based fast GC–MS analysis method is the use of column flow programming from 1 up to 32 ml min^?1 column flow rate. Column flow programming can reduce the analysis time by about a factor of two and unlike temperature programs of GC ovens the carrier gas flow rate can be raised and lowered very quickly (in a few seconds). The fast GC–MS with Cold EI method is demonstrated by the analysis of heroin in its street drug powder and cocaine on paper money and it can be applied for other drugs of abuse as a general fast drugs analysis method.     

The Deuterated “Magic Methyl” Group: A Guide to Site-Selective Trideuteromethyl Incorporation and Labeling by Using CD3 Reagents

In the field of medicinal chemistry, the precise installation of a trideuteromethyl group is gaining ever-increasing attention. Site-selective incorporation of the deuterated “magic methyl” group can provide profound pharmacological benefits and can be considered an important tool for drug optimization and development. This review provides a structured overview, according to trideuteromethylation reagent, of currently established methods for site-selective trideuteromethylation of carbon atoms. In addition to CD₃, the selective introduction of CD₂H and CDH₂ groups is also considered. For all methods, the corresponding mechanism and scope are discussed whenever reported. As such, this review can be a starting point for synthetic chemists to further advance trideuteromethylation methodologies. At the same time, this review aims to be a guide for medicinal chemists, offering them the available C−CD₃ formation strategies for the preparation of new or modified drugs.     

Thieno[2,3-b]pyridine-2-carbohydrazide in Polyheterocyclic Synthesis: The Synthesis of Pyrido[3′,2′:4,5]thieno[3,2-d]pyrimidine,Pyrido[3′,2′:4,5]thieno[3,2-d][1,2,3]triazine,and Pyrazolyl,Oxadiazolylthieno[2,3-b]pyridine Derivatives

Pyrdine-2(1H)-thione 1 reacted with ethyl chloroacetate 2 to give 2-S-ethoxy-carbonylmethylpyridine derivative 3, which could be cyclized into thieno[2,3-b]-pyridine-2-carbohydrazide derivative 5 by boiling with hydrazine hydrate. The latter compound reacted with cinnamonitrile derivatives 6a, b, triethylorthoformate, formic acid, dimethylformamide-dimethylacetal, and diethyl carbonate to give the corresponding shiff base 7a, b and pyrido[3′,2′;-4,5]thieno[3,2-d]pyrimidine derivatives 10–13 in respective manner. On the other hand, compound 5 also reacted with carbondisulphide and phenyl isothiocyanate to afford the corresponding 2-(1,3,4-oxadiazolo-2-yl)thieno[2,3-b]pyridine derivatives 18 and 22. Finally, compound 5 reacted with some β-dicarbonyl compounds, such as ethyl acetoacetate, acetylacetone and ethyl β-arylazoacetoacetate, to yield the corresponding 2-(pyrazol-1-yl-carbonyl)thieno[2,3-b]pyridine derivatives 24, 25, and 27 respectively.     

Using magnetized water as a solvent for a green,catalyst-free,and efficient protocol for the synthesis of pyrano[2,3-c]pyrazoles and pyrano[4′,3′:5,6]pyrazolo [2,3-d]pyrimidines

Research on Chemical Intermediates - A facile, eco-friendly, and highly efficient one-pot four-component protocol is demonstrated for the synthesis of the pyrano[2,3-c]pyrazole and...     

The Sulfur Rich Fluorothiophosphate Dianions [S5P2F2]2− and [S3PF]2− : Cluster and Chelation Control of P-S Heterolysis

The sulfur rich difluoropentathiodiphosphate dianion [S₅P₂F₂]²⁻, from fluoride addition to P₄S₁₀, has a somewhat checkered history and proves to be the main product of the reaction in acetonitrile. Its optimized synthesis, and structural characterization, as either a tetraphenylphosphonium or a tetrapropylammonium salt, [NⁿPr₄]₂[S₅P₂F₂] allows for the first coordination chemistry for this dianion. Reactions of [S₅P₂F₂]²⁻ with d¹⁰ metal ions of zinc(II), and cadmium(II), and d⁹ copper(II) resulted in a surprising diverse array of binding modes and structural motifs. In addition to the simple bis-chelate coordination of [S₅P₂F₂]²⁻ with zinc, cleavage of the P−S bond resulted in complexes with the unusual [S₃PF]²⁻ fluorotrithiophosphate dianion. This was observed in two cluster complexes: a trinuclear cadmium complex with mixed [S₅P₂F₂]²⁻/[S₃PF]²⁻ ligands, [Cd₃(S₅P₂F₂)₃(S₃PF)₂]⁴⁻ as well as an octanuclear copper cluster, [Cu₈(S₃PF)₆]⁴⁻ which form rapidly at room temperature. These new metal/sulfur/ligand clusters are of relevance to understanding multimetal binding to metallothionines, and to potential capping strategies for the condensed nanoparticulate cadmium chalcogenide semiconductors CdS and CdSe.     

Thiacalix[4]arene-alkali metal assemblies: crystal structures and guest-binding capabilities of supramolecular architectures supported by metal coordination and cation-π interactions

To investigate alkali metal complexation with sulfur-linked calixarene analogues and their guest-binding properties for gaseous organic guest molecules, we elucidated a crystal structure of a cesium complex with p-H-thiacalix[4]arene (1·4H) ligands and guest-binding properties of the cesium complex (2) and the previously reported rubidium complex (3). In crystals of the complex 2, a ‘sandwich-like’ binuclear complex was formed by inter-molecular coordination of cesium cations to the thiacalixarene molecules and methanol molecules, mutually interacting by aromatic-H?S hydrogen bonding and alkali metal cation-π interactions between the alkali metal cation and thiacalixarene aromatic rings outside of the cavities. On the guest-binding behaviors both complexes 2 and 3 toward organic guest molecules, methanol, ethanol, and 1-propanol as polar molecules, the complex 2 has no methanol adsorption ability, but the complex 3 showed vapor adsorption properties for all guest molecules. In particular, both complexes exhibited a high adsorption capability toward ethanol molecule. As results of gaseous guest adsorption measurements for alcohol molecules, the guest-binding of these complexes are significantly different because the properties depend heavily on structural natures between complexes 2 and 3.     

Iridium Cluster Chemistry: The Synthesis and the Solid-State Structure of [Ir11(CO)23]3−

The cluster [Ir₁₁(CO)₂₃]^3– was obtained by reaction of [Ir₁₀(CO)₂₁]^2– and [Ir(CO)₄]^– in refluxing MeCN, and its solid-state structure was determined on the salt [NEt₄]₃[Ir₁₁(CO)₂₃]. The metallic framework of D_3h symmetry is composed by three face-fused octahedra, all sharing a common edge. The cluster contains 9 edge bridging and 14 terminal carbonyl ligands, a disposition different from that of the two isomeric forms of the isoelectronic [Rh₁₁(CO)₂₃]^3–, both having, in the solid-state, more edge-bridging COs. Naked clusters of non-transition metals, found in binary and ternary materials, such as Cs₁₁O₃, display very similar trioctahedral polyedra.     

Synthesis and characterisation of [tris(1,3-dithiole-2-thione-4,5-dithiolato)-stannate]2−, [Q]2[Sn(dmit)3], [tris(1,3-dithiole-2-one-4,5-dithiolato)stannate]2−, [Q]2[Sn(dmio)3] and [tris(1,3-dithiole-2-thione-4,5-selenolato)stannate]2−, [Q]2[Sn(dsit)3], complexes: Analysis of the structural variations of the [Sn(dmit)3]2− and [Sn(dmio)3]2− dianions

[Tris(1,3-dithiole-2-thione-4,5-dithiolato)stannate]²⁻, [Q]₂[Sn(C₃S₅)₃], [tris(1,3-dithiole-2-one-4,5-dithiolato)stannate]²⁻, [Q]₂[Sn(C₃S₄O)₃], and [tris(1,3-dithiole-2-thione-4,5-diselenolato)stannate]²⁻ [Q]₂[Sn(C₃S₃Se₂)₃], complexes, have been synthesised and characterised. Crystal structure determinations of [Q]₂[Sn(C₃S₅)₃] (Q=1,4-dimethylpyridinium, monoclinic and orthorhombic forms; NMe₄, NEt₄, and PPh₄) and [NEt₄]₂[Sn(C₃S₄O)₃] revealed variations in the overall dianion structures. The geometry about tin in each case is essentially octahedral with the chelate bite angles in the range 80.7(5)–87.45(4)°: the range of Sn–S distances is 2.5207(18)–2.571(17) Å. A statistical analysis, carried out on the crystal structure data for the six complexes, indicated that the most critical factors in controlling the overall shape of the dianion were the distances of the Sn atom from the dithiolate ligand planes [Sn–OOP]. Interanionic S⋯S interactions, within the sum of the van der Waals’ radii for two S atoms, are affected by the size of the cation, Q; the secondary connectivity is 3-dimensional for the smallest cations, Q=1,4-dimethylpyridinium and NMe₄, in chains for the somewhat larger cation, NEt₄ and is absent for the still larger, PPh₄ cation.