金属锂负极失效机制及其先进表征技术

尽管传统的石墨负极在商业化锂离子电池中取得了成功,但其理论容量低(372 mAh·g^?1)、本身不含锂的先天缺陷限制了其在下一代高比能量锂电池体系中的应用,特别是在需要锂源的锂-硫和锂-空气电池体系中。金属锂因其极高的理论比容量(3860 mAh·g^?1)和低氧化还原电势(相对于标准氢电极为?3.040 V),被认为是下一代锂电池负极材料的最佳选择之一。但是,金属锂负极存在库伦效率低、循环性能差、安全性差等一系列瓶颈问题亟待解决,而循环过程中锂枝晶的生长、巨大的体积变化、以及电极界面不稳定等是导致这些问题的关键因素。本文综述了近年来关于金属锂负极瓶颈问题及其机理,包括金属锂电极表面固态电解质界面膜的形成,锂枝晶的生长行为,以及惰性死锂的形成。同时,本文还介绍了目前用于研究金属锂负极的先进表征技术,这些技术为研究人员深入认识金属锂负极的失效机制提供了重要信息。     

人工界面层在金属锂负极中的应用

金属锂具有极高的比容量(3860 mAh·g^?1)和最低的电化学反应电位(相对标准氢电位为?3.040 V),被认为是高能量密度二次电池最具潜力的负极材料。然而金属锂负极界面稳定性差、不可控的枝晶生长、沉积/剥离过程中巨大的体积变化等严重阻碍了金属锂负极的商业化应用。在金属锂表面构建一层物理化学性质稳定的人工界面保护层被认为是解决金属锂负极界面不稳定和枝晶生长,缓解体积膨胀带来的界面波动等一系列问题的有效手段。本综述依据界面传导性质,从离子导通而电子绝缘的人工固态电解质界面(SEI)层、离子/电子混合传导界面、纳米界面钝化层三个部分对人工界面保护层进行了归纳总结。分析了人工界面保护层的物质结构与性能之间的构效关系,探讨了如何提高人工界面保护层的物理化学稳定性、界面离子输运、界面强度与柔韧性、界面兼容性等。最后,指出用于金属锂负极的人工界面保护层目前面临的主要挑战,并对其未来的发展进行了展望。     

Regulating Interfacial Lithium Ion by Artificial Protective Overlayers for High-Performance Lithium Metal Anodes

The main limitation of lithium (Li) metal anodes lies in their severe dendrite growth due to nonuniform Li⁺ flux and sluggish Li⁺ transportation at the anode surface. Fabricating artificial protective overlayer with tunable surficial properties on Li metal is a precise and effective strategy to relieve this problem. In this Concept article, we focus on the basic principles of regulating interfacial Li⁺ through artificial protective overlayers and summarize the material preparation as well as structural design of these overlayers. The remaining challenges and promising directions of artificial protective overlayers are then highlighted to provide clues for the practical application of Li metal anodes.     

定量的复合金属锂作为三维泡沫锂电极用于锂电池的研究

金属锂作为电池的负极材料具有极高的比容量和极低的氧化还原电位,能够显著提升电池的能量密度。然而,金属锂负极在实际应用中所面临的主要问题是锂枝晶、界面副反应和电极体积变化大的难题。在本文中,我们提出了一种通过将定量的金属锂与三维骨架进行复合形成三维泡沫锂负极的策略,并利用三维泡沫锂来抑制锂枝晶的生长和缓解电极的体积变化。因此,三维泡沫锂电极有利于金属锂负极的高效利用,并能借助其与平面锂箔相比更高的比表面积和更多的反应位点来提升电池的倍率性能。因此,通过采用三维泡沫锂,对称电池的循环寿命和倍率性能都得到了有效的提升。EIS数据结果表明,三维泡沫锂能够减小对称电池的电荷转移阻抗。而且,将三维泡沫锂作为负极组装的LTO全电池,与锂箔作为负极相比,循环1000周平均放电比容量从65 mAh·g^-1提升至121 mAh·g^-1。     

A Diffusion‐‐Reaction Competition Mechanism to Tailor Lithium Deposition for Lithium‐Metal Batteries

Lithium metal is recognized as one of the most promising anode materials owing to its ultrahigh theoretical specific capacity and low electrochemical potential. Nonetheless, dendritic Li growth has dramatically hindered the practical applications of Li metal anodes. Realizing spherical Li deposition is an effective approach to avoid Li dendrite growth, but the mechanism of spherical deposition is unknown. Herein, a diffusion‐reaction competition mechanism is proposed to reveal the rationale of different Li deposition morphologies. By controlling the rate‐determining step (diffusion or reaction) of Li deposition, various Li deposition scenarios are realized, in which the diffusion‐controlled process tends to lead to dendritic Li deposition while the reaction‐controlled process leads to spherical Li deposition. This study sheds fresh light on the dendrite‐free Li metal anode and guides to achieve safe batteries to benefit future wireless and fossil‐fuel‐free world.     

功能化固态电解质膜改性锂金属负极的研究进展

对高比能量锂离子电池需求的不断增加激发了锂金属负极的应用研究。锂金属具有高放电比容量(3860 mAh·g^?1),低电极电位(?3.04 V),是锂离子电池的理想负极材料。然而,锂金属在循环过程中会形成不稳定的固态电解质(SEI)膜,而且会生成枝晶,枝晶的生长会引发电池短路等安全问题,极大地阻碍了其应用。理想的SEI膜应具有良好的锂离子传导性、表面电子绝缘性和机械强度,可调控锂离子在表面均匀沉积,促进离子传输,抑制枝晶生长,因此构筑功能化SEI膜是解决锂金属负极所面临挑战的一项有效策略。本综述以锂金属枝晶形成和生长的机理为出发点,分析总结SEI膜的构建策略、不同组成SEI膜的结构和功能特性及其对锂金属负极性能的影响,并对锂金属实用化面临的挑战及未来发展方向进行了展望。     

Reactive Polymer as Artificial Solid Electrolyte Interface for Stable Lithium Metal Batteries

Lithium (Li) metal anodes have the highest theoretical capacity and lowest electrochemical potential making them ideal for Li metal batteries (LMBs). However, Li dendrite formation on the anode impedes the proper discharge capacity and practical cycle life of LMBs, particularly in carbonate electrolytes. Herein, we developed a reactive alternative polymer named P(St-MaI) containing carboxylic acid and cyclic ether moieties which would in situ form artificial polymeric solid electrolyte interface (SEI) with Li. This SEI can accommodate volume changes and maintain good interfacial contact. The presence of carboxylic acid and cyclic ether pendant groups greatly contribute to the induction of uniform Li ion deposition. In addition, the presence of benzyl rings makes the polymer have a certain mechanical strength and plays a key role in inhibiting the growth of Li dendrites. As a result, the symmetric Li||Li cell with P(St-MaI)@Li layer can stably cycle for over 900 h under 1 mA cm⁻² without polarization voltage increasing, while their Li||LiFePO₄ full batteries maintain high capacity retention of 96 % after 930 cycles at 1C in carbonate electrolytes. The innovative strategy of artificial SEI is broadly applicable in designing new materials to inhibit Li dendrite growth on Li metal anodes.     

Lithiophilic Sites in Doped Graphene Guide Uniform Lithium Nucleation for Dendrite-Free Lithium Metal Anodes

Lithium (Li) metal is the most promising electrode for next-generation rechargeable batteries. However, the challenges induced by Li dendrites on a working Li metal anode hinder the practical applications of Li metal batteries. Herein, nitrogen (N) doped graphene was adopted as the Li plating matrix to regulate Li metal nucleation and suppress dendrite growth. The N-containing functional groups, such as pyridinic and pyrrolic nitrogen in the N-doped graphene, are lithiophilic, which guide the metallic Li nucleation causing the metal to distribute uniformly on the anode surface. As a result, the N-doped graphene modified Li metal anode exhibits a dendrite-free morphology during repeated Li plating and demonstrates a high Coulombic efficiency of 98 % for near 200 cycles.     

Columnar Lithium Metal Anodes

The rechargeable lithium metal anode is of utmost importance for high‐energy‐density batteries. Regulating the deposition/dissolution characteristics of Li metal is critical in both fundamental researches and practical applications. In contrast to gray Li deposits featured with dendritic and mossy morphologies, columnar and uniform Li is herein plated on lithium‐fluoride (LiF)‐protected copper (Cu) current collectors. The electrochemical properties strongly depended on the microscale morphologies of deposited Li, which were further embodied as macroscale colors. The as‐obtained ultrathin and columnar Li anodes contributed to stable cycling in working batteries with a dendrite‐free feature. This work deepens the fundamental understanding of the role of LiF in the nucleation/growth of Li and provides emerging approaches to stabilize rechargeable Li metal anodes.     

稳定锂电化学沉积和溶解行为的LiC6异质微结构界面层

本文采用机械辊压方法在金属锂表面通过原位固相反应生成LiC₆异质微结构界面层,并研究了在碳酸酯有机电解液体系下该异质层对锂电化学沉积和溶解行为的影响。通过形貌表征与电化学测试发现,LiC₆异质层能够有效提升锂电化学沉积的可逆性与均匀性,从而抑制枝晶生长及维持沉积/溶解界面的稳定。使用异质层改性金属锂负极的扣式全电池也较纯金属锂负极体系表现出更为优异的循环稳定性。     

A Diffusion--Reaction Competition Mechanism to Tailor Lithium Deposition for Lithium-Metal Batteries

Lithium metal is recognized as one of the most promising anode materials owing to its ultrahigh theoretical specific capacity and low electrochemical potential. Nonetheless, dendritic Li growth has dramatically hindered the practical applications of Li metal anodes. Realizing spherical Li deposition is an effective approach to avoid Li dendrite growth, but the mechanism of spherical deposition is unknown. Herein, a diffusion-reaction competition mechanism is proposed to reveal the rationale of different Li deposition morphologies. By controlling the rate-determining step (diffusion or reaction) of Li deposition, various Li deposition scenarios are realized, in which the diffusion-controlled process tends to lead to dendritic Li deposition while the reaction-controlled process leads to spherical Li deposition. This study sheds fresh light on the dendrite-free Li metal anode and guides to achieve safe batteries to benefit future wireless and fossil-fuel-free world.     

Facile Generation of Polymer–Alloy Hybrid Layers for Dendrite‐Free Lithium‐Metal Anodes with Improved Moisture Stability

Lithium‐metal anodes are recognized as the most promising next‐generation anodes for high‐energy‐storage batteries. However, lithium dendrites lead to irreversible capacity decay in lithium‐metal batteries (LMBs). Besides, the strict assembly‐environment conditions of LMBs are regarded as a challenge for practical applications. In this study, a workable lithium‐metal anode with an artificial hybrid layer composed of a polymer and an alloy was designed and prepared by a simple chemical‐modification strategy. Treated lithium anodes remained dendrite‐free for over 1000 h in a Li–Li symmetric cell and exhibited outstanding cycle performance in high‐areal‐loading Li–S and Li–LiFePO₄ full cells. Moreover, the treated lithium showed improved moisture stability that benefits from the hydrophobicity of the polymer, thus retaining good electrochemical performance after exposure to humid air.     

A Flexible Solid Electrolyte Interphase Layer for Long‐Life Lithium Metal Anodes

Lithium (Li) metal is a promising anode material for high‐energy density batteries. However, the unstable and static solid electrolyte interphase (SEI) can be destroyed by the dynamic Li plating/stripping behavior on the Li anode surface, leading to side reactions and Li dendrites growth. Herein, we design a smart Li polyacrylic acid (LiPAA) SEI layer high elasticity to address the dynamic Li plating/stripping processes by self‐adapting interface regulation, which is demonstrated by in situ AFM. With the high binding ability and excellent stability of the LiPAA polymer, the smart SEI can significantly reduce the side reactions and improve battery safety markedly. Stable cycling of 700 h is achieved in the LiPAA‐Li/LiPAA‐Li symmetrical cell. The innovative strategy of self‐adapting SEI design is broadly applicable, providing opportunities for use in Li metal anodes     

A Nano‐shield Design for Separators to Resist Dendrite Formation in Lithium‐Metal Batteries

Lithium dendrite growth during repeated charge and discharge cycles of lithium‐metal anodes often leads to short‐circuiting by puncturing the porous separator. Here, a morphological design, the nano‐shield, for separators to resist dendrites is presented. Through both mechanical analysis and experiment, it is revealed that the separator protected by the nano‐shield can effectively inhibit the penetration of lithium dendrites owing to the reduced stress intensity generated and therefore mitigate the short circuit of Li metal batteries. More than 110 h of lithium plating life is achieved in cell tests, which is among the longest cycle life of lithium metal anode and five times longer than that of blank separators. This new aspect of morphological and mechanical design not only provides an alternative pathway for extending lifetime of lithium metal anodes, but also sheds light on the role of separator engineering for various electrochemical energy storage devices.     

A Nano-shield Design for Separators to Resist Dendrite Formation in Lithium-Metal Batteries

Lithium dendrite growth during repeated charge and discharge cycles of lithium-metal anodes often leads to short-circuiting by puncturing the porous separator. Here, a morphological design, the nano-shield, for separators to resist dendrites is presented. Through both mechanical analysis and experiment, it is revealed that the separator protected by the nano-shield can effectively inhibit the penetration of lithium dendrites owing to the reduced stress intensity generated and therefore mitigate the short circuit of Li metal batteries. More than 110 h of lithium plating life is achieved in cell tests, which is among the longest cycle life of lithium metal anode and five times longer than that of blank separators. This new aspect of morphological and mechanical design not only provides an alternative pathway for extending lifetime of lithium metal anodes, but also sheds light on the role of separator engineering for various electrochemical energy storage devices.     

Functional lithiophilic polymer modified separator for dendrite-free and pulverization-free lithium metal batteries

Severe performance drop and fire risk due to the uneven lithium(Li) dendrite formation and growth during charge/discharge process has been considered as the major obstacle to the practical application of Li metal batteries.So inhibiting dendrite growth and producing a stable and robust solid electrolyte interface(SEI) layer are essential to enable the use of Li metal anodes.In this work,a functional lithiophilic polymer composed of chitosan(CTS),polyethylene oxide(PEO),and poly(triethylene glycol dimethacrylate)(PTEGDMA),was homogeneously deposited on a commercial Celgard separator by combining electrospraying and polymer photopolymerization techniques.The lithiophilic environment offered by the CTS-PEO-PTEGDMA layer enables uniform Li deposition and facilitates the formation of a robust homogeneous SEI layer,thus prevent the formation and growth of Li dendrites.As a result,both Li/Li symmetric cells and LiFePO4/Li full cells deliver significantly enhanced electrochemical performance and cycle life.Even after 1000 cycles,the specific capacity of the modified full cell could be maintained at65.8 mAh g^-1, twice which of the unmodified cell(32.8 mAh g^-1).The long-term cycling stability in Li/Li symmetric cells,dendrite-free anodes in SEM images and XPS analysis suggest that the pulverization of the Li anode was effectively suppressed by the lithiophilic polymer layer.     

Lithiophilic Sites in Doped Graphene Guide Uniform Lithium Nucleation for Dendrite‐Free Lithium Metal Anodes

Lithium (Li) metal is the most promising electrode for next‐generation rechargeable batteries. However, the challenges induced by Li dendrites on a working Li metal anode hinder the practical applications of Li metal batteries. Herein, nitrogen (N) doped graphene was adopted as the Li plating matrix to regulate Li metal nucleation and suppress dendrite growth. The N‐containing functional groups, such as pyridinic and pyrrolic nitrogen in the N‐doped graphene, are lithiophilic, which guide the metallic Li nucleation causing the metal to distribute uniformly on the anode surface. As a result, the N‐doped graphene modified Li metal anode exhibits a dendrite‐free morphology during repeated Li plating and demonstrates a high Coulombic efficiency of 98 % for near 200 cycles.     

Fluorescence Probing of Active Lithium Distribution in Lithium Metal Anodes

The uncontrollable growth of Li dendrites and the accumulation of byproducts are two severe concerns for lithium metal batteries, which leads to safety hazards and a low Coulombic efficiency. To investigate the deterioration of the cell, it is important to figure out the distribution of active Li species on the anode surface and distinguish Li dendrites from byproducts. However, it is still challenging to identify these issues by conventional visual observation methods. In this work, we introduce a novel fluorescent probing strategy using 9,10‐dimethylanthracene (DMA). By marking the cycled Li‐anode surface, the active Li distribution can be visualized by the fluorescence quenching of DMA reacting with active Li. The method demonstrates validity for electrolyte selection and predictive detection of uneven Li deposition on Li metal anodes. Furthermore, the location of dendrites can be clearly identified after destructive utilization of the anode, which will contribute to the development of failure‐analysis technology for Li metal batteries.     

Temperature‐Dependent Nucleation and Growth of Dendrite‐Free Lithium Metal Anodes

It is essential to develop a facile and effective method to enhance the electrochemical performance of lithium metal anodes for building high‐energy‐density Li‐metal based batteries. Herein, we explored the temperature‐dependent Li nucleation and growth behavior and constructed a dendrite‐free Li metal anode by elevating temperature from room temperature (20 °C) to 60 °C. A series of ex situ and in situ microscopy investigations demonstrate that increasing Li deposition temperature results in large nuclei size, low nucleation density, and compact growth of Li metal. We reveal that the enhanced lithiophilicity and the increased Li‐ion diffusion coefficient in aprotic electrolytes at high temperature are essential factors contributing to the dendrite‐free Li growth behavior. As anodes in both half cells and full cells, the compact deposited Li with minimized specific surface area delivered high Coulombic efficiencies and long cycling stability at 60 °C.     

Self‐Stabilized and Strongly Adhesive Supramolecular Polymer Protective Layer Enables Ultrahigh‐Rate and Large‐Capacity Lithium‐Metal Anode

Constructing a solid electrolyte interface (SEI) is a highly effective approach to overcome the poor reversibility of lithium (Li) metal anodes. Herein, an adhesive and self‐healable supramolecular copolymer, comprising of pendant poly(ethylene oxide) (PEO) segments and ureido‐pyrimidinone (UPy) quadruple‐hydrogen‐bonding moieties, is developed as a protection layer of Li anode by a simple drop‐coating. The protection performance of in‐situ‐formed LiPEO–UPy SEI layer is significantly enhanced owing to the strong binding and improved stability arising from a spontaneous reaction between UPy groups and Li metal. An ultrathin (approximately 70 nm) LiPEO–UPy layer can contribute to stable and dendrite‐free cycling at a high areal capacity of 10 mAh cm^?2 at 5 mA cm^?2 for 1000 h. This coating together with the promising electrochemical performance offers a new strategy for the development of dendrite‐free metal anodes.