Bestimmung neutraler Reaktionsprodukte in Ionen-Molekül-Reaktionen bei Drücken bis 1,3 mbar

An apparatus has been designed and built up to investigate reactions of accelerated ions with a neutral gas target. It was of great importance to analyze the neutral reaction products. Such reactions and these products played a significant role in the identification of the elements 104 and 105 by ZVARA et al. Preliminary results are reported for the systems Ar⁺+H₂ and Kr⁺+CO₂, in which neutral reaction products could be identified.     

Microwave-Assisted Elemental-Direct-Reaction Route to Nanocrystalline Copper Sulfides Cu9S8 and Cu7S4

Non-stoichiometric copper sulfides Cu₉S₈ and Cu₇S₄ nanocrystallites were synthesized by the reaction between elements S and Cu under microwave radiation for several minutes. The products were analyzed by using XRD, TEM, XPS, ICP and PL.     

Some reactions of iron (III) and chromium (III) fluorides with oxides

Reactions of FeF₃ with several oxides at elevated temperatures are described. Reaction products were usually Fe₂O₃ and the fluoride of the other element. With higher valency elements complete fluorine exchange did not always occur and oxyfluorides were formed. Intermediates in the reactions include oxyfluorides and mixed oxides, again only found with higher valency elements. Some shorter studies on the reaction of CrF₃ with oxides are included for comparisons, the reactions observed being generally similar.     

Chalcogen-Expanded Unsaturated Silicon Clusters: Thia-, Selena-, and Tellurasiliconoids

Reactions of silylenes with heavier chalcogens (E) typically result in Si=E double bonds or their π-addition products. In contrast, the oxidation of a silylene-functionalized unsaturated silicon cluster (siliconoid) with Group 16 elements selectively yields cluster expanded siliconoids Si₇E (E=S, Se, Te) fully preserving the unsaturated nature of the cluster scaffold as evident from the NMR signatures of the products. Mechanistic considerations by DFT calculations suggest the intermediacy of a Si₆ siliconoid with exohedral Si=E functionality. The reaction thus may serve as model system for the oxidation of surface-bonded silylenes at Si(100) by chalcogens and their diffusion into the silicon bulk.     

Trace element determination in beauty products by k0-instrumental neutron activation analysis

A recent study on trace elements in beauty products and cosmetics sold on the Asian market has shown the presence of high levels of U, Th and rare earth elements in so called “Hormesis cosmetics.” For the purpose of comparison, some more information about trace elements in European cosmetics would be useful. In this paper the results obtained using k ₀-standardised Instrumental Neutron Activation Analysis (k ₀-INAA) for more than 20 trace elements in 20 different beauty products collected from the European market are presented. We found traces of Ba, As and Sb which is in breach with European legislation. For some of the other elements like Cr and Co further speciation is needed in order to evaluate their presence in beauty products.     

Multiple bond migration with participation of a protophilic agent

The pathways of migration of the double bond in heteroallylic systems XCH₂CH=CH₂ (X =NMe₂, OMe, PMe₂, and SMe) with participation of hydroxide ion were investigated by theab initio RHF/6-31+G^* and MP2/6-31+G^* methods. The results are compared with those of analogous calculations of the systems with X=H, Me. Conformational isomerism of the initial molecules and reaction products, as well as the structure of intermediate carbanions, are considered. Increased acidity of compounds containing atoms of the third-row elements is explained in terms of a negative hyperconjugation model, 1,3-Hydrogen shift with participation of hydroxide ion in the system XCH₂CH=CH₂ results in double bond migration toward substituent X to form 1-hetero-1-propenes XCH=CHMe. Comparison of the energies of the final products indicates thermodynamic preferableness of the formation ofE-isomers. At the same time, in the case of substituents with atoms of the second-row elements the interaction of σ-bonds of the substituents and the p-AO of the terminal C atom additionally stabilizesZ-isomers of the carbanions and can be the reason for preferable kinetically controlled formation of these isomers. If the subsituents contain atoms of the third-row elements, the formation ofE-isomers of 1-hetero-1-propenes becomes both kinetically and thermodynamically predominant.     

Rapid, efficient, room temperature aromatization of Hantzsch-1,4-dihydropyridines with vanadium(V) salts: superiority of classical technique versus microwave promoted reaction

The aromatization of 1,4-dihydropyridines (1,4-DHPs) employing group 4 (Zr and Hf) and 5 (V, Nb, Ta) elements of periodic system has been studied. The reaction with VOCl₃ in dichloromethane at room temperature afforded products, substituted pyridines, in high-to-excellent yield. For the first time, the formation of charge-transfer complexes (CTCs) has been evidenced in preorganization step between 1,4-DHP and oxidant before electron transfer. The CTC has been formed only in neutral solvents such as dichloromethane and is characterized by intensive coloration. The aromatization of 1,4-DHP with V₂O₅ in refluxing acetic acid has found to be superior over microwave promoted reaction in solventless media. The only reasonable explanation was found in polymeric structure of V₂O₅, which slowly transfer energy of microwaves needed for the activation of the reactants. The solvent polarity dependent oxidative dealkylation of 4-n-propyl-1,4-DHP has been discovered. Unexpectedly, the reaction in acetic acid afforded only 33% of dealkylated product compared to 91% obtained in dichloromethane under the same reaction conditions.     

The Novel Method of Synthesis of Solid Solutions LnxCa1-xF2+x (Ln=Yb,Nd) Using Beta-cyclodextrin

In this study we propose the novel method of synthesis of solid solutions Ln_xCa_1-xF_2+x (Ln = Yb, Nd) by decomposition of metal trifluoroacetate hydrates with beta-cyclodextrin. It is important to mention that the decomposition of the similar reaction mixture without beta-cyclodextrin does not induce the formation of such compounds. In this case, the formation of individual fluorides takes place. The metal fluorides were studied by XRD and X-ray fluorescence. The advantages of the method proposed are as follows: relatively low temperature of the synthesis, simplicity of a change in the composition of the prepared compounds, and a homogeneous distribution of the elements in products.     

Direct asymmetric aldol reaction co-catalyzed by l-proline and group 12 elements Lewis acids in the presence of water

An approach based on combinations of various water compatible Lewis acids and l-proline co-catalysts has been evaluated for the direct asymmetric aldol reaction. From this broad screening, chloride salts from group 12 elements (ZnCl₂, CdCl₂, HgCl₂) lead to the highest stereoselectivities. Optimized catalytic conditions (catalytic system: l-proline: 20%/ZnCl₂: 10%; solvent mixture: DMSO/H₂O, 8:2) gave anti aldol products with improved enantioselectivity (>99% ee) compared to a moderately stereoselective procedure based on proline activation only.     

Nanoporous ultra-high-entropy alloys containing fourteen elements for water splitting electrocatalysis

High-entropy alloys (HEAs) are near-equimolar alloys comprising five or more elements. In recent years, catalysis using HEAs has attracted considerable attention across various fields. Herein, we demonstrate the facile synthesis of nanoporous ultra-high-entropy alloys (np-UHEAs) with hierarchical porosity via dealloying. These np-UHEAs contain up to 14 elements, namely, Al, Ag, Au, Co, Cu, Fe, Ir, Mo, Ni, Pd, Pt, Rh, Ru, and Ti. Furthermore, they exhibit high catalytic activities and electrochemical stabilities in the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) in acidic media, superior to that of commercial Pt/graphene and IrO₂ catalysts. Our results offer valuable insights for the selection of elements as catalysts for various applications.

Nanoporous ultra-high-entropy alloys containing 14 elements (Al, Ag, Au, Co, Cu, Fe, Ir, Mo, Ni, Pd, Pt, Rh, Ru, and Ti) were obtained by dealloying. The products showed excellent electrocatalytic performance for water splitting in acidic media.     

Energy disposal in gas-phase nucleophilic displacement reactions

The partitioning of reaction exothermicity into relative translational energy of the products of gas-phase S_N2 (F^? + CH₃Cl) and nucleophilic aromatic substitution (F^? + C₆H₅Cl) reactions has been investigated using kinetic energy release Fourier transform ion cyclotron resonance spectroscopy. The chloride product ion is observed to be highly translationally excited for the S_N2 reaction, indicating a cold internal energy distribution for the products. For the chlorobenzene reaction the products are not generated with large translational energies. The results are compared with a statistical model. Ion-intensity profiles for the CH₃Cl reaction deviate significantly from the statistical model whereas the chlorobenzene results are consistent with this model. The kinetic energy release for the CH₃C1 reaction is compared with energy-disposal results for the photodissociation and dissociative electron-attachment processes of halomethanes. In all three cases a node in the molecular orbital between the carbon atom and the departing halogen results in a repulsive energy release. Ion-retention curves for the nucleophilic aromatic substitution reaction are consistent with the existence of a long-lived ion-dipole complex on the exit channel for this reaction.     

A Reliable Aerosol‐Spray‐Assisted Approach to Produce and Optimize Amorphous Metal Oxide Catalysts for Electrochemical Water Splitting

An aerosol‐spray‐assisted approach (ASAA) is proposed and confirmed as a precisely controllable and continuous method to fabricate amorphous mixed metal oxides for electrochemical water splitting. The proportion of metal elements can be accurately controlled to within (5±5) %. The products can be sustainably obtained, which is highly suitable for industrial applications. ASAA was used to show that Fe₆Ni₁₀O_x is the best catalyst among the investigated Fe‐Ni‐O_x series with an overpotential of as low as 0.286 V (10 mA cm^?2) and a Tafel slope of 48 mV/decade for the electrochemical oxygen evolution reaction. Therefore, this work contributes a versatile, continuous, and reliable way to produce and optimize amorphous metal oxide catalysts.     

POLYMERIZATION OF OCTAFLUOROCYCLOBUTANE IN GLOW DISCHARGE Ⅱ. ESCA AND IR CHARACTERIZATION OF POLYMER STRUCTURE*

In a capacitively coupled discharge with external electrodes, He, H_2, N_2 or Ar were used as plasmagas, polymerization of octafluorocyclobutane was carried out under different conditions by varyingdischarge power, pressure, plasma gas and plasma-gas/monomer ratio. Structure of polymerizedproducts was characterized by IR spectroscopy and ESCA measurement. It was found that therewere six elements in the products, i.e. C, F, Si, O, N and H. The probably existed groups in poly-mers wer investigated. By analyzing the resolved peaks of C_(1S) region in ESCA spectra, effect of thereaction conditions on degree of branching of the polymerized products and the relationship of thepolymer structure wth the mechanism of the competitive ablation and polymerization process werestudied. In addition, polymer deposition process occurring in glow discharge was discussed.     

Molecular Beam Studies on the Laser-Enhanced Surface Reaction of GaAs(100) with Chlorine

A cw supersonic Cl₂ molecular beam coupled with an angle-resolved time-of-flight (TOF) technique has been used to investigate the laser-enhanced surface reaction of GaAs(100) with chlorine. The mass and velocity distributions of the major reaction products under 1064 nm laser irradiation have been measured as a function of laser fluence, detection angle, surface temperature and normal component of the translational energy of the incident chlorine molecules. It has been found that increasing both laser fluence and the translational energy of incident chlorine molecules markedly enhance mis surface reaction. The measured flux angular distributions of major reaction products can be fit satisfactorily with a bi-cosine function. Measurements of the mass and angular distributions of reaction products by a modulated molecular beam mass spectrometry show that the surface temperature effect is obvious for the Cl₂/GaAs(100) “dark” thermal reaction. A direct activated dissociative chemisorption is proposed for the mechanism of Cl₂ chemisorption on the GaAs(100) surface.     

CuPy2Cl2: A Novel and Efficient Catalyst for Synthesis of Propargylamines Under the Conventional Method and Microwave Irradiation

CuPy₂Cl₂ is an efficient catalyst for the preparation of propargylamines via three-component coupling reaction of aromatic aldehydes, amines, and aromatic alkynes stirred at 95 °C without using any solvent to afford the corresponding products in good yields. The reaction mixture was irradiated at 450 W in a microwave oven to furnish the expected products in excellent yields.     

Vacuum and oxidative pyrolysis of poly-p-xylylene. II. Chromatographic analysis and kinetics of reaction products

Reaction products of vacuum and oxidative degradation of poly-p-xylylene have been quantitatively determined by chromatographic analysis as function of time, temperature and oxygen pressure. Respective Arrhenius parameters were also ascertained for some of the reaction products and for the sums of all products. The energies of activation for the sums agree quite satisfactorily with the energies of activation obtained previously by uninterrupted experiments in quartz-spoon reaction vessels. The results found here can be described in terms of mechanisms previously postulated on the basis of the total loss in weight (or volatile production) data. Scission of “weak” links (due to abnormal structures) takes place followed by formation of various products. The whole process is governed by the initial chain scission reaction; however, the energies of activation for each of the products do not need to be identical with that of the chain scission reaction. Each product is formed by a reaction which has its own characteristic number average kinetic chain lengths; the latter have their specific energy of activation values. Oxidative degradation produces the same organic compounds as vacuum degradation and in addition CO, CO₂, and H₂O. Oxidized intermediate compounds are apparently fairly rapidly decarboxylated and decarbonylated. Oxidative chain scission is appreciably faster than that in vacuum. Almost simultaneous “weak” link and “normal” chain scission are taking place initiating the formation of a number of products.     

Lanthanide–actinide separation by bis-2-ethylhexylphosphoric acid from citric acid–nitric acid medium

Phosphate rock (Pho-ore) is the starting raw material used in manufacturing of most phosphate products. This material contains phosphorous, natural uranium, thorium potassium radionuclide and other trace elements. Single super phosphate powder (SSPho-P), single super phosphate granules (SSPho-G), and triple super phosphate (TSPho) are the common phosphate products produced along with phosphogypsym (CaSO₄) as a waste product. Since these materials are industrially manufactured by the reaction of the phosphate ore with phosphoric and sulphuric acids, these products and the waste product are extremely acidic. Pho-ore, SSPho-P, SSPho-G, TSPho and CaSO₄ samples were used in our study. Chemical analyses showed that these phosphate samples contain phosphorous, iron, aluminum ions and traces of uranium ions. Accumulation of the fertilizers on soils usually transfers some of these ions from the fertilizer materials to the soil/water interfaces. The migration of uranium U(VI), P, Al and Fe in subsurface soils was found to be strongly influenced by the sorption/desorption reaction at the solid/water interfaces. Thus, dissolution of these ions in soil/water phases is very important. Speciation of U(VI), P, Al and Fe in soil/water phases were calculated using a geochemical code (MINTEQA2). This study was conducted to determine sorption properties and the surface electrical properties of these ions at the soil samples.     

Synthesis and characterization of the Pt/Al2O3 systems modified with group III (Ga) and Group IV (Ge,Ti, and Zr) elements in the combined conversion of propane and n-Heptane

Under the conditions of a joint reaction of propane and n-heptane at temperatures of 460–520°C and a pressure of 0.35 MPa, the conversion of propane and the concentration of C₇₊ aromatization products on platinum-containing catalysts modified by Group III (Ga) and Group IV (Ge, Ti, and Zr) elements were higher than those on an unmodified Pt/Al₂O₃ sample. This is explained by a change in the aprotic acidity of the catalysts as a result of the support modification. The sample with the addition of gallium was most active. A plausible reason for this is the conversion of hydrocarbons at active sites that consist of Pt and Ga, which were formed upon catalyst activation. It is believed that gallium adjacent to platinum in an ionic form on the support surface acts as an aprotic acid site.     

Mechanism and Selectivity of the Oxidative Ring Contraction of Cyclic α‐Formyl Ketones

The oxidative contraction of α‐formal ketone to form continuous all carbon chiral centers promoted by H₂O₂ is widely used in natural product total synthesis. Typically, using this transformation, chiral cyclic ketones are obtained as the major products and ring‐opening products as the minor products. Herein, DFT calculations have been used to investigate the detailed reaction mechanism and chemoselectivity. In addition, with the widely accepted mechanism of H₂O₂‐promoted transformation, our systematic investigation with various explicit‐solvent‐model calculations for the first time shows that H₂O and H₂O₂ are comparable at catalyzing the rate‐determining step of this reaction, which emphasis the importance of solvent effect in such transformations. It is found that both the less ring‐constrain and a later transition state in an exothermic reaction account for the origin why the reaction favors ring‐contraction pathway rather than ring‐opening one. By a comprehensive analysis for the substituted groups, it has been disclosed that the steric effects of the substituted groups on R² and R³ contribute to the selectivity with larger steric hindrance favoring the chiral cyclic products. Moreover, the electronic effects on R¹ but not R³ affect the selectivity with electron‐donating groups leading to the cyclic products. Based on our calculations, some predictions for higher selectivity have been made.     

Linear-Reactor-IR.-Matrix and Microwave Spectroscopy of the System O3/NO2/(Z)-2-Butene

Investigation of the formation of complex reaction products in the gas-phase system O₃/NO₂/(Z)-2-butene by combination of linear reactors with IR. matrix and microwave Stark Spectroscopy is reported. Besides the polyatomic products observed earlier in the gas-phase ozonolysis of (Z)-2-butene, the following products were identified; N₂O₅, HNO₃, HNO₄, CH₃NO₂, CH₃ONO, CH₃COONO₂ and CH₃COO₂NO₂ (peroxyacetyl nitrate, PAN). Matrix IR. spectra of N₂O₅, HNO₃. CH₃COONO, CH₃COONO₂ required for reference purposes are presented. It is shown that PAN-formation occurs already in the absence of light. A reaction scheme is proposed for explanation of the observed complex NO_x-containing products, which assumes methyldioxirane as a central intermediate. Particular reaction steps of the scheme will be discussed, including thermochemical estimates of reaction enthalpies.