Electrokinetic supercharging focusing in capillary zone electrophoresis of weakly ionizable analytes in environmental and biological samples

Five non‐steroidal anti‐inflammatory drugs, naproxen, fenoprofen, ketoprofen, diclofenac and piroxicam, were separated and analyzed by electrokinetic supercharging in CZE. Three different setups of the ITP technique were assayed for the separation and preconcentration of these five non‐steroidal anti‐inflammatory drugs. For the setup that gave the best results, we evaluated the influence of different parameters on separation and preconcentration efficiency such as sample pH, concentration of the leading stacker, BGE composition, electrokinetic injection time, composition and hydrodynamic injection of the solvent plug and of the terminating stacker. In the selected setup, the BGE (10 mM Na₂B₄O₇ + 50 mM NaCl in 10% of MeOH aqueous solution) contained the leading electrolyte while the terminating electrolyte, hydrodynamically injected after the sample (50 mbar×12 s), was 50 mM of CHES. Prior to sample injection at (700 s at −2 kV) a short plug of MeOH (50 mbar ×3 s) was hydrodynamically injected. The results show that this strategy enhanced detection sensitivity 2000‐fold compared with normal hydrodynamic injection, providing detection limits of 0.08 μg/L for standard samples with good repeatability (values of relative standard deviation, %RSD < 1.03%). Method validation with river water samples and human plasma demonstrated good linearity, with detection limits of 0.9 and 2 μg/L for river water samples and human plasma samples, respectively (as well as satisfactory precision in terms of repeatability and reproducibility).     

Electrokinetic supercharging in CE for the separation and preconcentration of barbiturate drugs in urine samples

Three barbiturate drugs, barbital, phenobarbital, and secobarbital were separated and analyzed by electrokinetic supercharging. The influence of different parameters on electrokinetic supercharging performance was evaluated using both univariated and multivariated optimization processes. The parameters studied were sample pH, concentration, and length of the leading and terminating electrolytes, electrokinetic injection of the sample and composition and hydrodynamic injection of the solvent plug. The leading electrolyte (50 mM NaCl) was hydrodynamically injected (50 mbar × 120 s) prior to the sample that was adjusted to pH 9.6 and electrokinetically injected at ?8.5 kV for 300 s. The terminating electrolyte (100 mM of 2‐(cyclohexylamino) ethanesulphonic acid) was then hydrodynamically injected (50 mbar × 140 s). The results showed that this strategy enhanced detection sensitivity around 1050‐fold compared with normal hydrodynamic injection, providing detection limits ranging between 1.5 and 2.1 ng/mL for standard samples with good repeatability in terms of peak area (values of relative standard deviation, %RSD < 3). The applicability of the optimized method was demonstrated by the analysis of human urine samples spiked with the studied compounds at different concentration levels and further liquid–liquid extraction step. The estimated detection limits obtained in the urine samples extract ranged between 8 and 15 ng/mL.     

Analysis of protoberberine alkaloids in several herbal drugs and related medicinal preparations by non-aqueous capillary electrophoresis

A simple, rapid, reproducible, and universal non-aqueous capillary electrophoresis method has been developed for the separation and determination of three major active protoberberine alkaloids including berberine, palmatine, and jatrorrhizine within 7 min. The effects of the concentrations of acetic acid and electrolyte, the ratio of organic solvent, and the applied voltage on the separation were investigated. The optimum running buffer was composed of 50 mM ammonium acetate, 0.5% (v/v) acetic acid, and 10% (v/v) acetonitrile in methanol. The applied voltage was 18 kV. The analytes were detected by UV at 214 nm. The linearities between peak areas and the concentrations of the analytes were also investigated, and they exhibit excellent linear behavior over the concentration ranges (correlation coefficients: 0.9975-0.9986). The method was successfully applied to determine the three alkaloids in several families of herbal drugs (Rhizoma Coptidis, Cortex Berberidis, Cortex Phellodendri, Herba Chelidonii, Caulis Mahoniae) and their relevant medicinal preparations for the first time, and the recoveries of the three constituents ranged between 95.6-103.2% for berberine, 97.5-103.3% for palmatine, and 96.1 -103.6% for jatrorrhizine.     

Determination of sugars using ligand-exchange capillary electrophoresis

The capabilities of the ligand-exchange capillary electrophoresis mode (working electrolyte, 1 mM copper(II) and 175 mM NH3; 30 mbar, 10 s; +25 kV; 245 nm; 20°C) for the determination of sugars (glucose, fructose, and sucrose) in real samples (fruit juices, wines, and drug preparations) were studied. With the use of glucose as an example, the detection limits for direct (as sugar—copper(II) complexes; 245 nm) and indirect (working electrolyte, 5 mM tryptophan and 50 mM NaOH; 30 mbar, 10 s; +10 kV; 280 nm; 20°C) UV detection were compared: ≈21 and ≈8 mg/L (for direct and indirect detection, respectively).     

Analysis of phenolic acids by non-aqueous capillary electrophoresis after electrokinetic supercharging

Electrokinetic supercharging (EKS), a new and powerful on-line preconcentration method for capillary electrophoresis, was utilized in non-aqueous capillary electrophoresis (NACE) to enhance the sensitivity of phenolic acids. The buffer acidity and concentration, leader and terminator length and electrokinetic injection time were optimised, with the optimum conditions being: a background electrolyte of 40 mM Tris-acetic acid (pH 7.9), hydrodynamic injection of 50 mM ammonium chloride (22 s, 0.5 psi) as leader, electrokinetic injection of the sample (180 s, -10 kV), hydrodynamic injection of 20 mM CHES (32 s, 0.5 psi) as terminator, before application of the separation voltage (-25 kV). Under these conditions the sensitivity was enhanced between 1333 and 3440 times when compared to a normal hydrodynamic injection with the sample volume <3% of the capillary volume. Detection limits for the seven phenolic acids were in the range of 0.22-0.51 ng/mL and EKS was found to be 3.6-7.9 times more sensitive than large-volume sample stacking and anion selective exhaustive injection for the same seven phenolic acids.     

Electrokinetic supercharging for on-line preconcentration of seven non-steroidal anti-inflammatory drugs in water samples

The development of new sensitive methods for the analysis of non-steroidal anti-inflammatory drugs (NSAIDs) in water samples is of great importance. In this work, seven NSAIDs were separated within 9 min using 15 mM sodium tetraborate (pH 9.2) containing 0.1% (w/v) hexadimethrine bromide (HDMB) and 10% (v/v) methanol. Field-amplified sample injection (FASI) was examined and found to improve the detection limits by 200-fold providing detection limits of 0.6-2.0 microg/L, but these are insufficient for the determination of NSAIDs as environmental pollutants in water samples. To improve the sensitivity further, electrokinetic supercharging (EKS) was examined. The optimum EKS method involved hydrodynamic injection leading electrolyte (100 mM NaCl, 30 s, 50 mbar), electrokinetic injection of the sample (200 s, -10 kV) and finally injection of the terminating electrolyte (100 mM 2-(cyclohexylamino) ethanesulphonic acid, CHES, 40s, 50 mbar). With this method, the sensitivity was improved by 2400-fold giving detection limits of 50-180 ng/L. The developed method was validated and then applied to the analysis of wastewater samples from a local sewage treatment plant. The detection limits were found to increase by approximately 10-fold, however, this is still lower than levels previously found in wastewater samples from European and Mediterranean cities. The proposed method has the advantage of simplicity and achieving sensitivity through high-preconcentration power without the use of off-line chromatographic sample cleanup.     

Strategies for the on-line preconcentration and separation of hypolipidaemic drugs using micellar electrokinetic chromatography

Three strategies were investigated for the simultaneous separation and on-line preconcentration of charged and neutral hypolipidaemic drugs in micellar electrokinetic chromatography (MEKC). A background electrolyte (BGE) consisting of 20 mM ammonium bicarbonate buffer (pH 8.50) and 50 mM sodium dodecyl sulfate (SDS) was used for the separation and on-line preconcentration of the drugs. The efficiencies of sweeping, analyte focusing by micelle collapse (AFMC), and simultaneous field-amplified sample stacking (FASS) and sweeping, were compared for the preconcentration of eight hypolipidaemic drugs in different conductivity sample matrices. When compared with a hydrodynamic injection (5 s at 50 mbar, 0.51% of capillary volume to detection window) of drug mixture prepared in the separation BGE, improvements of detection sensitivity of 60-, 83-, and 80-fold were obtained with sweeping, AFMC and simultaneous FASS and sweeping, respectively, giving limits of detection (LODs) of 50, 36, and 38 μg/L, respectively. The studied techniques showed suitability for focusing different types of analytes having different values of retention factor (k). This is the first report for the separation of different types of hypolipidaemic drugs by capillary electrophoresis (CE). The three methods were validated then applied for the analysis of target analytes in wastewater samples from Hobart city.     

Determination of the beta-blocker atenolol in plasma by capillary zone electrophoresis

A capillary zone electrophoretic method was optimised for the determination of the beta-blocker atenolol in plasma. Separation was performed in an uncoated silica capillary of 58.5 cm (effective length 50 cm) x 75 microm I.D., and detection was at 194 nm. The effects of the buffer (concentration and pH), the injection time, the voltage applied and the plasma clean-up procedure were studied. The determination of atenolol was achieved in less than 3 min, using an electrolyte of 50 mM H3BO3-50 mM Na2B4O7 (50:50, v/v) pH 9, injected hydrodynamically for 4 s at 50 mbar and applying a voltage of +25 kV. This method was applied to the determination of atenolol in plasma of nine hypertensive patients (male and female, aged from 39 to 73 years). Atenolol concentrations found vary from 30 to 585 ng/ml.     

On-line concentration by head-column field amplified sample injection for the analysis of berberine, palmatine and jatrorrhizine in herbal medicine by flow injection-micellar electrokinetic chromatography

A simple, sensitive and continuous on-line stacking technique using head-column (HC)-field amplified sample injection (FASI) and sweeping was developed by combination of flow injection with micellar electrokinetic chromatography. Berberine, palmatine and jatrorrhizine were selected as model mixture to demonstrate this stacking method. Based on the characteristic of a 16-way injection valve (16-V), a sample was injected electrokinetically into a capillary after the introduction of a plug of water. Under optimum conditions, 64–86-fold improvement in the detection sensitivity was obtained for the analytes and the sample throughput can reach up to 24 h⁻¹ using the background electrolyte containing 240 mM ammonium acetate (pH 4.7), 30% (v/v) ethanol, and 2% (v/v) polyoxyethylene sorbitan monolaurate (Tween 20). The repeatabilities (n = 4) reached relative standard deviation values of 1.2, 2.7 and 3.1% for the peak areas and 1.6, 3.3 and 3.8% for peak heights of berberine, palmatine and jatrorrhizine, respectively. The limit of detection for the berberine, palmatine and jatrorrhizine was found to be 27, 26, 22 ng mL⁻¹ (S/N = 3).     

Validated Assay for the Determination of Mitoxantrone in Pharmaceuticals Using Capillary Zone Electrophoresis

Abstract

The first capillary zone electrophoretic (CZE) method for the determination of mitoxantrone (MTX) in pharmaceutical formulations was developed. The influence of background electrolyte (BGE) species, pH, concentration (c _BGE), organic modifier, capillary temperature, applied voltage, and injection time was investigated. Optimum results were achieved with 25 mM ammonium acetate at an apparent pH value of 5.0 in 50% v/v acetonitrile, applied voltage of +30 kV, and capillary temperature of 25°C. The samples were introduced into the capillary hydrodynamically for 2 s at 33.5 mbar. Mitoxantrone was detected at a wavelength of 242 nm. Mitoxantrone and doxorubicin (DOX) (used as internal standard, ISTD) were completely separated in less than 7 min. The method was suitably validated with respect to linearity, limits of detection (LOD) and quantification (LOQ), accuracy, precision, selectivity, and robustness. The proposed method was applied successfully for the determination of MTX in its injectable pharmaceutical formulation.     

Simultaneous determination of weakly ionizable analytes in urine and plasma samples by transient pseudo-isotachophoresis in capillary zone electrophoresis

A rapid method for the simultaneous determination of several non-steroidal anti-inflammatory drugs (NSAIDs) in human plasma and urine was developed using transient pseudo-isotachophoresis (ITP) in capillary zone electrophoresis (CZE). The influence of different parameters on resolution and preconcentration efficiency, such as background electrolyte (BGE) composition, sample injection, sample matrix composition, and pH, were studied to optimize the transient pseudo-ITP performance. Optimized conditions were a BGE consisting of 100 mM Na₂B₄O₇ in 10% aqueous MeOH solution and hydrodynamic injection of the sample at 50 mbar for 90 s. The sample was prepared in a solution mixture of 1% NaCl/ethanol (30:70 v/v) at pH 10. Our results show that this simple strategy offers improved sensitivity compared to conventional CZE analysis, reaching a 45-fold preconcentration factor. The detection limits (LODs) were as low as 0.07 mg/L for standard samples with good repeatability (values of relative standard deviation, %RSD < 11%). The method was applied to the analysis of NSAIDs in biological samples. Validation for human plasma and urine samples demonstrated good linearity, low detection limits, and satisfactory repeatability values.     

Development and validation of a stability-indicating micellar electrokinetic chromatography method for the determination of ezetimibe in pharmaceutical formulations.

A micellar electrokinetic chromatography (MEKC) method was validated for the analysis of ezetimibe. The method was carried out on a fused-silica capillary (50 microm i.d.; effective length, 40 cm). The background electrolyte consisted of a 25 mM borate buffer and 25 mM anionic detergent SDS (pH 9.75)/methanol (90:10, v/v). The capillary temperature was maintained at 35 degrees C, the applied voltage was 30 kV; the injection was performed using a pressure mode at 50 mbar for 5 s, with detection at 232 nm. The method was linear in the range of 2-150 microg/mL (R2=0.9999). The specificity and the stability-indicating capability were proven through degradation studies, which also showed that there was no interference of the excipients. The limits of quantitation and detection were 2 and 0.41 microg/mL, respectively. The method was applied for the analysis of ezetimibe pharmaceutical formulations, and the results were compared to those of the liquid-chromatography method.     

Determination of brompheniramine enantiomers in rat plasma by cation‐selective exhaustive injection and sweeping cyclodextrin modified electrokinetic chromatography method

A method consisting of cation‐selective exhaustive injection and sweeping (CSEI‐sweeping) as online preconcentration followed by a cyclodextrin modified electrokinetic chromatography (CDEKC) enantioseparation has been developed for the simultaneous determination of two brompheniramine enantiomers in rat plasma. In this method, analytes were electrokinetically injected at a voltage of 8 kV for 80 s in a fused‐silica capillary. Prior to the injection, the capillary was rinsed with 50 mM phosphate buffer of pH 3.5, followed by a plug of a higher conductivity buffer (150 mM phosphate pH 3.5, 20 psi, 6 min) and a plug of water (0.5 psi, 5 s). Separation was carried out applying –20 kV in 50 mM phosphate buffer, pH 3.5, containing 10% v/v ACN and 30 mg/mL sulfated‐β‐cyclodextrin (S‐β‐CD). Analytical signals were monitored at 210 nm. The detection sensitivity of brompheniramine enantiomers was enhanced by about 2400‐fold compared to the normal injection mode (hydrodynamic injection for 3 s at 0.5 psi, with a BGE of 50 mM phosphate buffer containing 20 mg/mL S‐β‐CD at pH 3.5), and LLOQ of two enantiomers were both 0.0100 μg/mL. In addition, this method had fairly good repeatability and showed promising capabilities in the application of stereoselective pharmacokinetic investigations for brompheniramine enantiomers in rat.     

A capillary zone electrophoresis for determination of thiolic peptides in biological samples

A new method to improve the analyses of thiolic peptides (cysteine, γGlu-Cys, glutathione, phytochelatins and desglycyl-phytochelatins) derivatized with monobromobimane (mBrB) in complex biological samples by CZE is described. The method involves a SPE using Sep-Pak Light C18 Cartridges after derivatization and a later CZE analysis. Elution of mBrB-thiols was achieved with 10 mM HCl + 70% methanol v/v in deionised water. Electrophoretic parameters, such as BGE pH and concentration, different organic additives (methanol and trifluoroethanol), applied voltage and capillary length were studied in order to establish suitable analytical conditions. Optimum separation of the mBrB-thiolic peptides was obtained with 100 mM sodium borate buffer at pH 7.60. The electrophoretic conditions were +15 kV, capillary length of 90 cm from inlet to detector (98 cm total length, 50 μm ID), samples were loaded into the capillary by hydrodynamic injection (50 mbar, 20 s) and detection was performed at 390 nm. The improved method showed good reproducibility, linearity and sensitivity. The LODs and LOQs estimated using a standard of GSH were 1.41 and 4.69 μM respectively.     

Online preconcentration by electrokinetic supercharging for separation of endocrine disrupting chemical and phenolic pollutants in water samples

Online preconcentration using electrokinetic supercharging (EKS) was proposed to enhance the sensitivity of separation for endocrine disrupting chemical (methylparaben (MP)) and phenolic pollutants (2‐nitrophenol (NP) and 4‐chlorophenol (CP)) in water sample. Important EKS and separation conditions such as the concentration of BGE; the choice of terminating electrolyte (TE); and the injection time of leading electrolyte (LE), sample, and TE were optimized. The optimum EKS‐CE conditions were as follows: BGE comprising of 12 mM sodium tetraborate pH 10.1, 100 mM sodium chloride as LE hydrodynamically injected at 50 mbar for 30 s, electrokinetic injection (EKI) of sample at –3 kV for 200 s, and 100 mM CHES as TE hydrodynamically injected at 50 mbar for 40 s. The separation was conducted at negative polarity mode and UV detection at 214 nm. Under these conditions, the sensitivity of analytes was enhanced from 100‐ to 737‐fold as compared to normal CZE with hydrodynamic injection, giving LOD of 4.89, 5.29, and 53 μg/L for MP, NP and CP, respectively. The LODs were adequate for the analysis of NP and CP in environmental water sample having concentration at or lower than their maximum admissible concentration limit (240 and 2000 μg/L for NP and CP). The LOD of MP can be suitable for the analysis of MP exists at mid‐microgram per liter level, even though the LOD was slightly higher than the concentration usually found in water samples (from ng/L to 1 μg/L). The method repeatabilities (%RSD) were in the range of 1.07–2.39% (migration time) and 8.28–14.0% (peak area).     

Field-amplified sample injection coupled with pseudo-isotachophoresis technique for sensitive determination of selected psychiatric drugs in human urine samples after dispersive liquid–liquid microextraction

A field-amplified sample injection (FASI) technique was elaborated for fast and sensitive determination of selected central nervous system drugs in human urine samples. Factors affecting the sensitivity enhancement, such as background electrolyte (BGE) and the analytical matrix composition were optimized and discussed. Pseudo-isotachophoresis (p-ITP) mechanism contribution in preconcentration mechanism was discussed. All separations were performed in uncoated fused silica capillaries 50 μm × 57 cm at 22 kV. The optimized analytical matrix was composed of 0.25 mM HCOOH in 90% (v/v) methanol, while BGE contained 45 mM TRIS/HCl (pH 2.20). The head-column injection was performed in 0.25 mM HCOOH water solution (3 s, 3.45 kPa). Sample was introduced into the capillary by electrokinetic injection (70 s, 5 kV) followed by short BGE plug (3 s, 3.45 kPa). Seven psychiatric drugs (olanzapine, prochlorperazine dimaleate, trifluoperazine dihydrochloride, perphenazine, promazine hydrochloride, clomipramine hydrochloride, and chlorprothixene hydrochloride) were separated in about 6 min. The elaborated method was additionally supported with dispersive liquid–liquid microextraction (DLLME) technique which in summary with FASI provided about 8000–13,000-fold sensitivity enhancement in comparison to the capillary zone electrophoresis (CZE) method with standard hydrodynamic injection (5 s, 3.45 kPa).     

Analysis of flavonoids by capillary zone electrophoresis with electrokinetic supercharging

On-line concentration via Electrokinetic Supercharging (EKS) was used to enhance the sensitivity of the capillary electrophoretic separation of the four flavonoids naringenin, hesperetin, naringin and hesperidin. Separation conditions, including the background electrolyte pH and concentration, the length and choice of terminator and the electrokinetic injection time were optimized. The optimum conditions were: a background electrolyte of 30 mM sodium tetraborate (pH 9.5) containing 5% (v/v) of methanol, electrokinetic injection of the sample (130 s, -10 kV) followed by hydrodynamic injecting of 100 mM 2-(cyclohexylamino)ethanesulfonic acid (CHES) (17 s, 0.5 psi) as terminator, and separation with -20 kV. Under these conditions the four flavonoids could be separated with a sample-to-sample time of 15 min and detection limits from 2.0 to 6.8 ng mL(-1). When compared to a conventional hydrodynamic injection the sensitivity was enhanced between 824 and 1515 times which is 7.6-16 times higher than other CE methods for the on-line concentration of flavonoids. The applicability of the developed method was demonstrated by the detection of the four flavonoids in an aqueous extract of Clematis hexapetala pall.     

Simultaneous determination of mitotane,its metabolite,and five steroid hormones in urine samples by capillary electrophoresis using β-CD2SDS1 complexes as hydrophobic compounds solubilizers

Mitotane is a cytotoxic drug used in the treatment of inoperable adrenocortical carcinoma, it inhibits steroidogenesis as well, and therefore monitoring the level of steroid hormones in patients treated with mitotane is a crucial point of therapy. Hence, we have developed a simple, fast, and efficient electrophoretic method combined with reverse polarity sweeping as online preconcentration technique and dispersive liquid–liquid microextraction for the simultaneous determination of mitotane, its main metabolite DDA, and five steroid hormones (progesterone, testosterone, epitestosterone, cortisol, and corticosterone) in urine samples. In addition, a new sample matrix consisting of β-CD₂SDS₁ complexes for a high hydrophobic compounds solubilization was developed. Approach based on the application of β-cyclodextrin and SDS complex of a ratio 2:1 allowed for hydrodynamic injection into the capillary of a solution containing both mitotane and other analytes. The detection limits of the analytes for the reverse polarity sweeping-dispersive liquid–liquid microextraction method were found to be in the range of 1.5–3 ng/mL, which were approximately 1000 times lower than in the conventional hydrodynamic injection (5 s, 0.5 psi) without any preconcentration procedure. All analytes were completely resolved in less than 13 min by uncoated silica capillary with an inner diameter of 75 μm (ID) × 60 cm. Electrophoretic separation was performed in reverse polarity with a voltage of –25 kV with a background electrolyte (BGE) consisting of 100 mM SDS, 25% ACN, 25 mM phosphate buffer (pH 2.5), and 7 mM β-cyclodextrin.     

Determination of doxycycline in pharmaceuticals and human urine by micellar electrokinetic capillary chromatography

Micellar electrokinetic capillary chromatography (MEKC) was performed at 25 °C and 30 kV (under a pressure of 15 mbar), using 30 mM borate buffer containing 60 mM sodium dodecysulfate (SDS) and 5% (v/v) methanol as background electrolyte (pH 9.0) to determine doxycycline. UV detection was at 350 nm. The method was shown to be specific, accurate (recovery was 100.3 ± 1.0%), linear over the tested range (correlation coefficient 0.9995) and precise (RSD <1.9%). The method was used to determine doxycycline in tablets, capsules and human urine after oral application.     

Determination of chloramphenicol in biological matrices by solid‐phase membrane micro‐tip extraction and capillary electrophoresis

Solid‐phase membrane micro‐tip extraction (SPMMTE) and capillary electrophoresis (CE) methods were developed and validated for analysis of chloramphenicol in human plasma and urine samples. Iron composite nanoparticles were prepared using green technology. CE was carried out using a silica capillary (60 cm × 50 μm i.d.), phosphate buffer (50 mm , 8.0 pH)–acetonitrile (95:5, v/v) as the background electrolyte, 10 kV voltage, 280 nm detection, 20 s injection time and 27 ± 1°C temperature. Frusemide was used as an internal standard. The values of migration time, electrophoretic mobility, electrophoretic velocity and theoretical plates of chloramphenicol were 12.254 min, 4.44 × 10, 7.41 × 10 and 11,227. The limits of detection and quantitation of chloramphenicol were 0.1 and 1.0 μg/mL. Recovery of chloramphenicol in the standard solution was 95%. Solid‐phase membrane micro‐tip extraction and capillary electrophoresis methods may be used to analyze chloramphenicol in human plasma and urine samples of any patient.