Conductive Microporous Covalent Triazine‐Based Framework for High‐Performance Electrochemical Capacitive Energy Storage

Nitrogen‐enriched porous nanocarbon, graphene, and conductive polymers attract increasing attention for application in supercapacitors. However, electrode materials with a large specific surface area (SSA) and a high nitrogen doping concentration, which is needed for excellent supercapacitors, has not been achieved thus far. Herein, we developed a class of tetracyanoquinodimethane‐derived conductive microporous covalent triazine‐based frameworks (TCNQ‐CTFs) with both high nitrogen content (>8 %) and large SSA (>3600 m² g^?1). These CTFs exhibited excellent specific capacitances with the highest value exceeding 380 F g^?1, considerable energy density of 42.8 Wh kg^?1, and remarkable cycling stability without any capacitance degradation after 10 000 cycles. This class of CTFs should hold a great potential as high‐performance electrode material for electrochemical energy‐storage systems.     

A hexaazatriphenylene-based porous organic polymer for high performance supercapacitor

Porous organic polymers (POPs) with high physiochemical stability and pseudocapacitive activity are crucial for supercapacitors with high specific capacitance and long cycle life. We report herein a hexaazatrinaphthylene-based POP (HPOP-1) for high-performance supercapacitor by introducing redox-active hexaazatrinaphthylene (HATN) moiety through Sonogashira–Hagihara coupling reaction. HATN moiety can undergo a proton-induced electron transfer redox reaction, which endows HPOP-1 with high pseudocapacitive activity. As electrode materials for supercapacitor application, HPOP-1 exhibits high specific capacitance (667 F g⁻¹ at 0.5 A g⁻¹) and long-term cyclic stability (90% capacitance retention after 10,000 cycles at 5 A g⁻¹) in a three-electrode system with 1 M H₂SO₄ as the electrolyte. In addition, HPOP-1 also exhibits a specific capacitance of 376 F g⁻¹ at 0.5 A g⁻¹ in 1 M KOH electrolyte. An asymmetric supercapacitor was further fabricated with HPOP-1 as negative electrode and rGO as positive electrode, respectively. The device delivers a specific capacitance of 63 F g⁻¹ at 0.5 A g⁻¹ and a rate performance of 37 F g⁻¹ at 5 A g⁻¹. Our work provides a facile approach for the design and preparation of pseudocapacitive POPs with high specific capacitance and long cycle life.     

High Energy Density Heteroatom (O,N and S) Enriched Activated Carbon for Rational Design of Symmetric Supercapacitors

Carbon-based symmetric supercapacitors (SCs) are known for their high power density and long cyclability, making them an ideal candidate for power sources in new-generation electronic devices. To boost their electrochemical performances, deriving activated carbon doped with heteroatoms such as N, O, and S are highly desirable for increasing the specific capacitance. In this regard, activated carbon (AC) self-doped with heteroatoms is directly derived from bio-waste (lima-bean shell) using different KOH activation processes. The heteroatom-enriched AC synthesized using a pretreated carbon-to-KOH ratio of 1:2 (ONS@AC-2) shows excellent surface morphology with a large surface area of 1508 m² g⁻¹. As an SC electrode material, the presence of heteroatoms (N and S) reduces the interfacial charge-transfer resistance and increases the ion-accessible surface area, which inherently provides additional pseudocapacitance. The ONS@AC-2 electrode attains a maximum specific capacitance (C_sp) of 342 F g⁻¹ at a specific current of 1 Ag⁻¹ in 1 m NaClO₄ electrolyte at the wide potential window of 1.8 V. Moreover, as symmetric SCs the ONS@AC-2 electrode delivers a maximum specific capacitance (C_sc) of 191 F g⁻¹ with a maximum specific energy of 21.48 Wh kg⁻¹ and high specific power of 14 000 W kg⁻¹ and excellent retention of its initial capacitance (98 %) even after 10000 charge/discharge cycles. In addition, a flexible supercapacitor fabricated utilizing ONS@AC-2 electrodes and a LiCl/polyvinyl alcohol (PVA)-based polymer electrolyte shows a maximum C_sc of 119 F g⁻¹ with considerable specific energy and power.     

Outstanding room-temperature capacitance of biomass-derived microporous carbons in ionic liquid electrolyte

A remarkable capacitance of 180 F·g^− 1 (at 5 mV·s^− 1) in solvent-free room-temperature ionic liquid electrolyte, 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide, was achieved in symmetric supercapacitors using microporous carbons with a specific surface area of ca. 2000 m²·g^− 1 calculated from gas sorption by the 2D-NLDFT method. The efficient capacitive charge storage was ascribed to textural properties: unlike most activated carbons, high specific surface area was made accessible to the bulky ions of the ionic liquid electrolyte thanks to micropores (1–2 nm) enabled by fine-tuning chemical activation. From the industrial perspective, a high volumetric capacitance of ca. 80 F·cm^− 3 was reached in neat ionic liquid due to the absence of mesopores. The use of microporous carbons from biomass waste represents an important advantage for large-scale production of high energy density supercapacitors.     

香菇生物质基氮掺杂微孔碳材料的制备及其在超级电容器中的应用

采用简易浸泡法和一步碳化/活化法制备香菇生物质基氮掺杂微孔碳材料(NMCs),利用扫描电子显微镜(SEM)、透射电子显微镜(SEM)、X射线衍射(XRD)和X射线光电子能谱(XPS)对材料的结构形貌进行表征,并研究了其超级电容特性。测试结果表明,NMCs的微孔比表面积高达1 594 m~2·g~(-1),且拥有更高数量的含氮官能团,其吡啶型含氮官能团比例也有所提高,展现出优异的超级电容特性。在0.5 A·g~(-1)的电流密度下,其比容量高达325 F·g~(-1),当电流密度上升到20 A·g~(-1)时,其比电容仍然高达180 F·g~(-1),表现出优异的倍率性能;同时,在5 A·g~(-1)的电流密度下,电极经历5 000次充放电循环后具有97.7%的比容量保持率,展现出优异的循环稳定性。这主要归因于NMCs超高的微孔比表面积和丰富的含氮官能团。     

Highly Dispersible Hexagonal Carbon–MoS2–Carbon Nanoplates with Hollow Sandwich Structures for Supercapacitors

MoS₂, a typical layered transition-metal dichalcogenide, is promising as an electrode material in supercapacitors. However, its low electrical conductivity could lead to limited capacitance if applied in electrochemical devices. Herein, a new nanostructure composed of hollow carbon–MoS₂–carbon was successfully synthesized through an l -cysteine-assisted hydrothermal method by using gibbsite as a template and polydopamine as a carbon precursor. After calcination and etching of the gibbsite template, uniform hollow platelets, which were made of a sandwich-like assembly of partial graphitic carbon and two-dimensional layered MoS₂ flakes, were obtained. The platelets showed excellent dispersibility and stability in water, and good electrical conductivity due to carbon provided by the calcination of polydopamine coatings. The hollow nanoplate morphology of the material provided a high specific surface area of 543 m² g⁻¹, a total pore volume of 0.677 cm³ g⁻¹, and fairly small mesopores (≈5.3 nm). The material was applied in a symmetric supercapacitor and exhibited a specific capacitance of 248 F g⁻¹ (0.12 F cm⁻²) at a constant current density of 0.1 A g⁻¹; thus suggesting that hollow carbon–MoS₂–carbon nanoplates are promising candidate materials for supercapacitors.     

Facile Synthesis of Nitrogen‐Containing Mesoporous Carbon for High‐Performance Energy Storage Applications

Porous carbon with high specific surface area (SSA), a reasonable pore size distribution, and modified surface chemistry is highly desirable for application in energy storage devices. Herein, we report the synthesis of nitrogen‐containing mesoporous carbon with high SSA (1390 m² g^?1), a suitable pore size distribution (1.5–8.1 nm), and a nitrogen content of 4.7 wt % through a facile one‐step self‐assembly process. Owing to its unique physical characteristics and nitrogen doping, this material demonstrates great promise for application in both supercapacitors and encapsulating sulfur as a superior cathode material for lithium–sulfur batteries. When deployed as a supercapacitor electrode, it exhibited a high specific capacitance of 238.4 F g^?1 at 1 A g^?1 and an excellent rate capability (180 F g^?1, 10 A g^?1). Furthermore, when an NMC/S electrode was evaluated as the cathode material for lithium–sulfur batteries, it showed a high initial discharge capacity of 1143.6 mA h g^?1 at 837.5 mA g^?1 and an extraordinary cycling stability with 70.3 % capacity retention after 100 cycles.     

Conjugated Copper–Catecholate Framework Electrodes for Efficient Energy Storage

A conjugated copper(II) catecholate based metal–organic framework (namely Cu-DBC) was prepared using a D₂-symmetric redox-active ligand in a copper bis(dihydroxy) coordination geometry. The π-d conjugated framework exhibits typical semiconducting behavior with a high electrical conductivity of ca. 1.0 S m⁻¹ at room temperature. Benefiting from the good electrical conductivity and the excellent redox reversibility of both ligand and copper centers, Cu-DBC electrode features superior capacitor performances with gravimetric capacitance up to 479 F g⁻¹ at a discharge rate of 0.2 A g⁻¹. Moreover, the symmetric solid-state supercapacitor of Cu-DBC exhibits high areal (879 mF cm⁻²) and volumetric (22 F cm⁻³) capacitances, as well as good rate capability. These metrics are superior to most reported MOF-based supercapacitors, demonstrating promising applications in energy-storage devices.     

One-Pot Hydrothermal Synthesis of Ternary 1T-MoS2/Hexa-WO3/Graphene Composites for High-Performance Supercapacitors

A new ternary composite of 1T-molybdenum disulfide, hexagonal tungsten trioxide, and reduced graphene oxide (M-W-rGO) is synthesized by using a one-pot hydrothermal process. The synergetic effect of 1T-MoS₂ and hexa-WO₃ nanoflowers improves the electrochemical performance for supercapacitors by inducing additional active sites and hexagonal tunnels, respectively, which lead to high storage capacity and easy transfer of electrolyte ions. The ternary M-W-rGO composite has a high specific capacitance of 836 F g⁻¹ at 1 A g⁻¹, which is nearly twice that of binary composites of M-rGO and W-rGO with high capacitance retention of 86.35 % after 3000 cycles at a high current density of 5 A g⁻¹. This study provides a new ternary composite that can be used as an electrode material for high-performance supercapacitors.     

Perovskite SrCo0.9Nb0.1O3−δ as an Anion‐Intercalated Electrode Material for Supercapacitors with Ultrahigh Volumetric Energy Density

We have synthesized and characterized perovskite‐type SrCo_0.9Nb_0.1O_3−δ (SCN) as a novel anion‐intercalated electrode material for supercapacitors in an aqueous KOH electrolyte, demonstrating a very high volumetric capacitance of about 2034.6 F cm⁻³ (and gravimetric capacitance of ca. 773.6 F g⁻¹) at a current density of 0.5 A g⁻¹ while maintaining excellent cycling stability with a capacity retention of 95.7 % after 3000 cycles. When coupled with an activated carbon (AC) electrode, the SCN/AC asymmetric supercapacitor delivered a specific energy density as high as 37.6 Wh kg⁻¹ with robust long‐term stability.     

N-Doped Porous Carbon Derived from Solvent-Free Synthesis of Cross-Linked Triazine Polymers for Simultaneously Achieving CO2 Capture and Supercapacitors

It is highly desirable to design advanced heteroatomic doped porous carbon for wide application. Herein, N-doped porous carbon (NPC) was developed via the fabrication of high nitrogen cross-linked triazine polymers followed by pyrolysis and activation with controllable porous structure. The as-synthesized NPC at the pyrolysis temperature of 700 °C possessed rich nitrogen content (up to 11.51 %) and high specific surface area (1353 m² g⁻¹), which led to a high CO₂ adsorption capability at 5.67 mmol g⁻¹ at 298.15 K and 5 bar pressure and excellent stability. When the activation temperature was at 600 °C, such NPC exhibited a superior electrochemical performance as anode for supercapacitors with a specific capacitance of 158.8 and 113 F g⁻¹ in 6 M KOH at a current density of 1 and 10 A g⁻¹, respectively. Notably, it delivered an excellent stability with capacity retention of 97.4 % at 20 A g⁻¹after 6000 cycles.     

Single-walled Carbon Nanotubes as Electrode Materials for Supercapacitors

Large-scale synthesized single-walled carbon nanotubes （SWNT） prepared by electric arc discharge method and a mixture of NiO and Y2O3 as catalyst have been used as electrode materials for supercapacitors. N2 adsorption/desorption measurement shows that the SWNT is a microporous and mesoporous material with specific surface area 435 m^2·g^-1. The specific capacitance of the nitric acid treated SWNT in aqueous electrolyte reaches as high as 105 F/g, which is a combination of electric double layer capacitance and pseudocapacitance. The SWNT-based capacitors also have good charge/discharge reversibility and cycling perdurability.     

Hierarchical Carbon Nanowire/Ni@MnO2 Nanocomposites for High-Performance Asymmetric Supercapacitors

A 3D hierarchical carbon cloth/nitrogen-doped carbon nanowires/Ni@MnO₂ (CC/N-CNWs/Ni@MnO₂) nanocomposite electrode was rationally designed and prepared by electrodeposition. The N-CNWs derived from polypyrrole (PPy) nanowires on the carbon cloth have an open framework structure, which greatly increases the contact area between the electrode and electrolyte and provides short diffusion paths. The incorporation of the Ni layer between the N-CNWs and MnO₂ is beneficial for significantly enhancing the electrical conductivity and boosting fast charge transfer as well as improving the charge-collection capacity. Thus, the as-prepared 3D hierarchical CC/N-CNWs/Ni@MnO₂ electrode exhibits a higher specific capacitance of 571.4 F g⁻¹ compared with those of CC/N-CNWs@MnO₂ (311 F g⁻¹), CC/Ni@MnO₂ (196.6 F g⁻¹), and CC@MnO₂ (186.1 F g⁻¹) at 1 A g⁻¹ and remarkable rate capability (367.5 F g⁻¹ at 10 A g⁻¹). Moreover, asymmetric supercapacitors constructed with CC/N-CNWs/Ni@MnO₂ as cathode material and activated carbon as anode material deliver an impressive energy density of 36.4 W h kg⁻¹ at a power density of 900 W kg⁻¹ and a good cycling life (72.8 % capacitance retention after 3500 cycles). This study paves a low-cost and simple way to design a hierarchical nanocomposite electrode with large surface area and superior electrical conductivity, which has wide application prospects in high-performance supercapacitors.     

A facile synthesis of hierarchical porous carbon derived from renewable lignin for high-performance supercapacitor

In this work, we proposed a facile one-pot pyrolysis method to conveniently manufacture lignin-derived carbon materials with graded porous construction for use in supercapacitors. The renewable lignin was selected as precursor, while the potassium citrate was used as a pore-forming agent. The properties of the prepared lignin-derived carbon (LAC) and the performance for supercapacitor application were thoroughly evaluated. The LAC at optimal preparation conditions shows a layered porous structure with a large specific surface area of 3174 cm² g⁻¹ and pore volume of 2.796 cm³ g⁻¹, where the specific capacitance reach to 241 F g⁻¹ at 1 A g⁻¹ scan rate in 6 M KOH electrolyte solution. At the same time, the specific capacitance remains at 220 F g⁻¹ even at an excessive scan velocity of 20 A g⁻¹, while the capacitance retention is still close to 91.3%. The capacitance retention rate is stable above 95% after 10,000 charge/discharge cycles, which shows the desired long-time stability. All these results demonstrate the outstanding properties of the new prepared LAC material and the considerable application potential in the field of electrical energy storage.     

Electrodeposition of MnO2 nanowires on carbon nanotube paper as free-standing,flexible electrode for supercapacitors

MnO₂ nanowires were electrodeposited onto carbon nanotube (CNT) paper by a cyclic voltammetric technique. The as-prepared MnO₂ nanowire/CNT composite paper (MNCCP) can be used as a flexible electrode for electrochemical supercapacitors. Electrochemical measurements showed that the MNCCP electrode displayed specific capacitances as high as 167.5 F g⁻¹ at a current density of 77 mA g⁻¹. After 3000 cycles, the composite paper can retain more than 88% of initial capacitance, showing good cyclability. The CNT paper in the composite acted as a good conductive and active substrate for flexible electrodes in supercapacitors, and the nanowire structure of the MnO₂ could facilitate the contact of the electrolyte with the active materials, and thus increase the capacitance.     

When High-Temperature Cesium Chemistry Meets Self-Templating: Metal Acetates as Building Blocks of Unusual Highly Porous Carbons

Self-templating is a facile strategy for synthesizing porous carbons by direct pyrolysis of organic metal salts. However, the method typically suffers from low yields (<4%) and limited specific surface areas (SSA<2000 m² g⁻¹) originating from low activity of metal cations (e.g., K⁺ or Na⁺) in promoting construction and activation of carbon frameworks. Here we use cesium acetate as the only precursor of oxo-carbons with large SSA of the order of 3000 m² g⁻¹, pore volume approaching 2 cm³ g⁻¹, tunable oxygen contents, and yields of up to 15 %. We unravel the role of Cs⁺ as an efficient promoter of framework formation, templating and etching agent, while acetates act as carbon/oxygen sources of carbonaceous frameworks. The oxo-carbons show record-high CO₂ uptake of 8.71 mmol g⁻¹ and an ultimate specific capacitance of 313 F g⁻¹ in the supercapacitor. This study helps to understand and rationally tailor the materials design by a still rare organic solid-state chemistry.     

Graphene-Like Carbon Derived from Macadamia Nut Shells for High-Performance Supercapacitor

The graphene-like carbon was obtained from macadamia nut shells by an activated hydrothermal method and applied for high-performance supercapacitors. The morphologies and microstructures are investigated by X-ray diffractometer, Raman spectrometer, scanning electron microscopy and transmission electron microscopy. The experimental results show that the obtained carbon exhibits perfect graphene-like structure filled with more micropores and mesopores. The graphene-like carbon displays high surface areas of 1057 m² g^?1. The graphene-like carbon delivers an impressive specific capacitance of 251 F g^?1 and has no capacitance loss at the current density of 1 A g^?1 after 1000 cycles, which demonstrates the excellent cycle stability and high specific capacitance. The graphene-like carbon derived from macadamia nut shells can be expected for the widespread application of supercapacitors.

     

Flexible Polyester Cellulose Paper Supercapacitor with a Gel Electrolyte

A low-cost polyester cellulose paper has been used as a substrate for a flexible supercapacitor device that contains aqueous carbon nanotube ink as the electrodes and a polyvinyl alcohol (PVA)-based gel as the electrolyte. Gel electrolytes have attracted much interest due to their solvent-holding capacity and good film-forming capability. The electrodes are characterized for their conductivity and morphology. Because of its high conductivity, the conductive paper is studied in supercapacitor applications as active electrodes and as separators after coating with polyvinylidene fluoride. Carbon nanotubes deposited on porous paper are more accessible to ions in the electrolyte than those on flat substrates, which results in higher power density. A simple fabrication process is achieved and paper supercapacitors are tested for their performance in both aqueous and PVA gel electrolytes by using galvanostatic and cyclic voltammetry methods. A high specific capacitance of 270 F g⁻¹ and an energy density value of 37 W h kg⁻¹ are achieved for devices with PVA gel electrolytes. Furthermore, this device can maintain excellent specific capacitance even under high currents. This is also confirmed by another counter experiment with aqueous sulfuric acid as the electrolyte. The cycle life, one of the most critical parameters in supercapacitor operations, is found to be excellent (6000 cycles) and less than 0.5 % capacitance loss is observed. Moreover, the supercapacitor device is flexible and even after twisting does not show any cracks or evidence of breakage, and shows almost the same specific capacitance of 267 F g⁻¹and energy density of 37 W h kg⁻¹. This work suggests that a paper substrate can be a highly scalable and low-cost solution for high-performance supercapacitors.     

A Hierarchically Porous ZIF@LDH Core-Shell Structure for High-Performance Supercapacitors

Designing nanocomposites with good electrochemical properties is one of the challenges in constructing supercapacitors. Adjustable metal-organic frameworks (MOFs) have potential research value in improving charge storage and transfer due to their multi-porosity. Moreover, MOFs can serve as a precursor to various derivatives. Herein, a series of core-shell structures with macro-microporous ZIF-67 (M-ZIF-67) as the core and layered double hydroxide (LDH) as the shell were synthesized based on polystyrene spheres (PSs) template via a simple ion etching method. As a result, the sample of M-ZIF-67@LDH4 shows a specific capacitance of 597.6 F g⁻¹ at 0.5 A g⁻¹ and a high rate retention of 92% at 3 A g⁻¹.     

Hierarchical FeCo2S4@FeNi2S4 Core/Shell Nanostructures on Ni Foam for High-Performance Supercapacitors

The design of electrode materials with rational core/shell structures is promising for improving the electrochemical properties of supercapacitors. Hence, hierarchical FeCo₂S₄@FeNi₂S₄ core/shell nanostructures on Ni foam were fabricated by a simple hydrothermal method. Owing to their structure and synergistic effect, they deliver an excellent specific capacitance of 2393 F g⁻¹ at 1 A g⁻¹ and long cycle lifespan as positive electrode materials. An asymmetric supercapacitor device with FeCo₂S₄@FeNi₂S₄ as positive electrode and graphene as negative electrode exhibited a specific capacitance of 133.2 F g⁻¹ at 1 A g⁻¹ and a high energy density of 47.37 W h kg⁻¹ at a power density of 800 W kg⁻¹. Moreover, the device showed remarkable cycling stability with 87.0 % specific-capacitance retention after 5000 cycles at 2 A g⁻¹. These results demonstrate that the hierarchical FeCo₂S₄@FeNi₂S₄ core/shell structures have great potential in the field of electrochemical energy storage.