MYCOCHROME SYSTEM AND CONIDIAL DEVELOPMENT IN CERTAIN FUNGI IMPERFECTI

Abstract. A photoreceptor system, “mycochrome”, is involved in a blue and near UV reversible photo-reaction which in turn plays an important role in the photocontrol of conidial development in Alternaria tomato, Botrytis cinerea and Helminthosporium oryzae. Conidial development was controlled by alternating exposures to blue and near UV light with the final response being determined by the final light received. When the final light was near UV a conidium developed; when it was blue, conidiation was inhibited and a “sterile” conidiophore was formed. The effects of the two lights were alternatively reversible. Blue and near UV reversible photoreaction was also found in a light-minus-dark difference spectrum of an intracellular particulate fraction isolated from dark-grown mycelia of A. tomato, and two pigments, P_B (blue absorbing type) and P_NUV (near UV absorbing type), were contained in that photoreaction. P_B was tightly bound to the particulate fraction and P_NUV was either soluble in the cytoplasm or very loosely bound to the particulate fraction. Blue and near UV reversible photoreaction occurred only under the coexistence of P_B and P_NUV. That is, a dip in the near UV region and peak absorbance in the blue region was induced by irradiation with near UV light; however, both conditions were partially dissipated with a subsequent irradiation of blue light. These absorbance changes were revers-ibly repeated by alternating doses of blue and near UV light. When molecular oxygen was introduced after exposure to near UV light, peak absorbance in the blue region rapidly disappeared, and these absorbance changes were repeatedly reversible. Similar results were obtained by treatment with sodium hydrosulfite and molecular oxygen. Thus, it was concluded that the mycochrome system suggested in photo-conidiation was consistent with certain active substances showing blue and near UV reversible absorbance changes and caused by photooxidation reduction reaction.     

Reversible Entropy-Driven Defect Migration and Insulator-Metal Transition Suppression in VO2 Nanostructures for Phase-Change Electronic Switching

Oxygen defects are among essential issues and required to be manipulated in correlated electronic oxides with insulator-metal transition (IMT). Besides, surface and interface control are necessary but challenging in field-induced electronic switching towards advanced IMT-triggered transistors and optical modulators. Herein, we demonstrated reversible entropy-driven oxygen defect migrations and reversible IMT suppression in vanadium dioxide (VO₂) phase-change electronic switching. The initial IMT was suppressed with oxygen defects, which is caused by the entropy change during reversed surface oxygen ionosorption on the VO₂ nanostructures. This IMT suppression is reversible and reverts when the adsorbed oxygen extracts electrons from the surface and heals defects again. The reversible IMT suppression observed in the VO₂ nanobeam with M2 phase is accompanied by large variations in the IMT temperature. We also achieved irreversible and stable IMT by exploiting an Al₂O₃ partition layer prepared by atomic layer deposition (ALD) to disrupt the entropy-driven defect migration. We expected that such reversible modulations would be helpful for understanding the origin of surface-driven IMT in correlated vanadium oxides, and constructing functional phase-change electronic and optical devices.     

Kinetics and mechanism of the reaction between aquacobalamin and isoniazid

Kinetics of the reaction of aquacobalamin (H₂OCbl) with isoniazid (isonicotinic acid hydrazide, INH) in weakly alkaline, neutral, and weakly acidic media was studied using UV–Vis spectroscopy. It is shown that the reversible formation of a complex more stable than those of cobalamin(III) with pyridine and hydrazine occurs during the reaction. A mechanism of the reaction includes reversible stages of binding a neutral INH molecule by cobalamin(III) through an oxygen atom with its subsequent deprotonation, along with the reversible interaction of H₂OCbl and the negatively charged form of INH.     

Reversible Hydrophobic–Hydrophilic Transition of Ionic Liquids Driven by Carbon Dioxide

Ionic liquids (ILs) with a reversible hydrophobic–hydrophilic transition were developed, and they exhibited unique phase behavior with H₂O: monophase in the presence of CO₂, but biphase upon removal of CO₂ at room temperature and atmospheric pressure. Thus, coupling of reaction, separation, and recovery steps in sustainable chemical processes could be realized by a reversible liquid–liquid phase transition of such IL‐H₂O mixtures. Spectroscopic investigations and DFT calculations showed that the mechanism behind hydrophobic–hydrophilic transition involved reversible reaction of CO₂ with anion of the ILs and formation of hydrophilic ammonium salts. These unique IL‐H₂O systems were successfully utilized for facile one‐step synthesis of Au porous films by bubbling CO₂ under ambient conditions. The Au porous films and the ILs were then separated simultaneously from aqueous solutions by bubbling N₂, and recovered ILs could be directly reused in the next process.     

Synthesis and Redox Behavior of Novel 9,10‐Diphenylphenanthrenes

The synthesis and electrochemical investigations of 9,10‐diphenylphenanthrene 2a and its derivatives 2b – 2e are reported. The cyclic voltammetry of derivatives 2a – 2c and 2e in different solvent/Bu₄NPF₆ electrolyte systems reveals that the redox properties are dependent on solvent, temperature, and sweep rate. The oxidation of 9,10‐diphenylphenanthrene 2a occurred as an irreversible process, while two fully reversible oxidation waves were observed for dimethoxy derivative 2c . The room‐temperature oxidation of brominated compound 2b is reversible, whereas AcO‐substituted phenanthrene 2e displayed a reversible oxidation peak only at low temperature. Furthermore, the electronic nature of the substituent affects the oxidation potentials. In the CH₂Cl₂‐based electrolyte system, the first oxidation potentials increase in the order 2c < 2e < 2b .     

Co@Co3O4 Encapsulated in Carbon Nanotube‐Grafted Nitrogen‐Doped Carbon Polyhedra as an Advanced Bifunctional Oxygen Electrode

Efficient reversible oxygen electrodes for both the oxygen reduction reaction (ORR) and the oxygen evolution reaction (OER) are vitally important for various energy conversion devices, such as regenerative fuel cells and metal–air batteries. However, realization of such electrodes is impeded by insufficient activity and instability of electrocatalysts for both water splitting and oxygen reduction. We report highly active bifunctional electrocatalysts for oxygen electrodes comprising core–shell Co@Co₃O₄ nanoparticles embedded in CNT‐grafted N‐doped carbon‐polyhedra obtained by the pyrolysis of cobalt metal–organic framework (ZIF‐67) in a reductive H₂ atmosphere and subsequent controlled oxidative calcination. The catalysts afford 0.85 V reversible overvoltage in 0.1 m KOH, surpassing Pt/C, IrO₂, and RuO₂ and thus ranking them among one of the best non‐precious‐metal electrocatalysts for reversible oxygen electrodes.     

A Synthetic Supramolecular Receptor for the Hydrosulfide Anion

Hydrogen sulfide (H₂S) has emerged as a crucial biomolecule in physiology and cellular signaling. Key challenges associated with developing new chemical tools for understanding the biological roles of H₂S include developing platforms that enable reversible binding of this important biomolecule. The first synthetic small molecule receptor for the hydrosulfide anion, HS^?, using only reversible, hydrogen‐bonding interactions in a series of bis(ethynylaniline) derivatives, is reported. Binding constants of up to 90 300±8700 m ^?1 were obtained in MeCN. The fundamental science of reversible sulfide binding, in this case featuring a key CH???S hydrogen bond, will expand the possibility for discovery of sulfide protein targets and molecular recognition agents.     

Reversible Single‐Crystal‐to‐Single‐Crystal Photochemical Formation and Thermal Cleavage of a Cyclobutane Ring

A [2+2] cycloaddition reaction has been observed in a number of solids. The cyclobutane ring in a photodimerized material can be cleaved into olefins by UV light and heat. The high thermal stability of the metal–organic salt K₂SDC (H₂SDC=4,4’‐stilbenedicarboxylic acid) has been successfully utilized to investigate the reversible cleavage of a cyclobutane ring. The two polymorphs of K₂SDC undergo reversible cyclobutane formation by UV light and cleavage by heat in cycles. Of these, one polymorph retains its single‐crystal nature during the reversible processes. Polymorphs are known to show different physical properties and chemical reactivities. This work reveals that the retention of single‐crystal nature is strongly associated with the packing of molecules, which is controlled by kinetics and thermodynamics. The photoemissive nature of the products makes this as a promising material for photoswitches and optical data storage devices.     

Tin oxide-titanium oxide/graphene composited as anode materials for lithium-ion batteries

A tin oxide-titanium oxide/graphene (SnO₂-TiO₂/G) ternary nanocomposite as high-performance anode for Li-ion batteries was prepared via a simple reflux method. The graphite oxide (GO) was reduced to graphene nanosheet, and the SnO₂-TiO₂ nanocomposites were evenly distributed on the graphene matrix in the SnO₂-TiO₂/G nanocomposite. The as-prepared SnO₂-TiO₂/G nanocomposites were employed as anode materials for lithium-ion batteries, showing an outstanding performance with high reversible capacity and long cycle life. The composite delivered a superior initial discharge capacity of 1,594.6 mAh g^?1 and a reversible specific capacity of 1,500.3 mAh g^?1 at a current density of 100 mA g^?1. After 100 cycles, the reversible discharge capacity was still maintained at 1,177.4 mAh g^?1 at a current density of 100 mA g^?1 with a high retained rate of reversible capacity of 73.8 %. The addition of small amount of TiO₂ nanoparticles improved the cycling stability and specific capacity of SnO₂-TiO₂/G nanocomposite, obviously. The results demonstrate that the SnO₂-TiO₂/G nanocomposite is a promising alternative anode material for practical Li-ion batteries.     

Reversible Switching CuII/CuI Single Sites Catalyze High-rate and Selective CO2 Photoreduction

Herein, we first design a model of reversible redox-switching metal–organic framework single-unit-cell sheets, where the abundant metal single sites benefit for highly selective CO₂ reduction, while the reversible redox-switching metal sites can effectively activate CO₂ molecules. Taking the synthetic Cu-MOF single-unit-cell sheets as an example, synchrotron-radiation quasi in situ X-ray photoelectron spectra unravel the reversible switching Cu^II/Cu^I single sites initially accept photoexcited electrons and then donate them to CO₂ molecules, which favors the rate-liming activation into CO₂^δ−, verified by in situ FTIR spectra and Gibbs free energy calculations. As an outcome, Cu-MOF single-unit-cell sheets achieve near 100 % selectivity for CO₂ photoreduction to CO with a high rate of 860 μmol g⁻¹ h⁻¹ without any sacrifice reagent or photosensitizer, where both the activity and selectivity outperform previously reported photocatalysts evaluated under similar conditions.     

Ambient Lithium–SO2 Batteries with Ionic Liquids as Electrolytes

Li‐SO₂ batteries have a high energy density but bear serious safety problems that are associated with pressurized SO₂ and flammable solvents in the system. Herein, a novel ambient Li‐SO₂ battery was developed through the introduction of ionic liquid (IL) electrolytes with tailored basicities to solvate SO₂ by reversible chemical absorption. By tuning the interactions of ILs with SO₂, a high energy density and good discharge performance with operating voltages above 2.8 V were obtained. This strategy based on reversible chemical absorption of SO₂ in IL electrolytes enables the development of the next generation of ambient Li‐SO₂ batteries.     

Electrochemical behavior of ellipticine derivatives: Part III. Reduction of 2-methyl-ellipticinium cations and their conjugated bases

In neutral DMF, ellipticinium cations 9 R—E⁺H—2 CH₃ undergo a reversible 1 e addition (standard potential ca. ?1.35 V) to yield a neutral radical which rapidly dimerizes (dimerization rate constant ca. 10⁷ mol^?1 1 s^?1). In basic DMF or in the presence of superoxide anion, the corresponding conjugated bases undergo a reversible 1 e addition accompanied by a fast and reversible proton addition (standard potential at pH_DMF 0 ca. ?0.52 V) to yield the same neutral radical. R being H, OCH₃ or OH, there is no effect of the substituent at the C-9 position on the electrochemical process.     

Synthesis and Electrochemical Performance of Spinel LiMn2O4—x（SO4）x Cathode Materials

ＩｎｔｒｏｄｕｃｔｉｏｎＩｎｒｅｃｅｎｔｙｅａｒｓ ,ｗｉｔｈｔｈｅｄｅｖｅｌｏｐｍｅｎｔｏｆａｌｌｓｏｒｔｓｏｆｃｅｌｌｕｌａｒｐｈｏｎｅｓ ,ｃａｍｃｏｒｄｅｒｓ ,ｌａｐｔｏｐｃｏｍｐｕｔｅｒｓ ,ｔｈｅｌｉｔｈｉｕｍ ｉｏｎｓｅｃｏｎｄａｒｙｂａｔｔｅｒｉｅｓｂａｓｅｄｏｎｔｈｅｕｓｅｏｆｌｉｔｈｉ ｕｍ ｍａｎｇａｎｅｓｅ ｏｘｉｄｅＬｉＭｎ2 Ｏ4 1,2 ｈａｖｅａｔｔｒａｃｔｅｄｍｕｃｈａｔ ｔｅｎｔｉｏｎ .ＢｕｔｔｈｅＬｉＭｎ2 Ｏ4 ｃａｔｈｏｄｅｍａｔｅｒｉａｌｈａｓａｄｉｓａｄ ｖａｎｔａｇｅｏｆ…     

Comparison of irreversible and reversible cluster formation

Covalent and reversible cluster molecules were synthesized by an A₃B₂ type gelation. Crosslinking of three-arm hydroxyl-terminated star polymers with 2,4-toluenediisocyanate gave branched polymers, while the reversible analogue was made by crosslinking of tertiary amine-terminated star polymers with bis(4-hydroxy-3,5-dinitrophenyl) adipate. Gelation process was followed by static and dynamic light scattering. The extent of reacted groups was measured with UV spectroscopy. Growth of the covalent clusters could be described in terms of percolation scaling laws. The experimental gel point (P_{OH, cr} = 0.70) was shifted significantly from the theoretical predicted gel point (P_{OH, cr} = 0.50), indicating extensive ring formation during the gelation. The reversible endlinking reaction gave no macroscopic gelation, though increase of the cluster dimensions was observed. Ring formation proved to be an important side reaction in both cases; however, the ring formation ability seems to change in a different manner during the course of a gelation.     

Microwave‐assisted Synthesis and Its Reversible Li‐storage Properties of Porous Sheet‐like Co3O4

Porous Co₃O₄ nanosheets were designed and fabricated from common Co(NO₃ )₂ solution without any surfactants or templates under microwave radiation conditions. After the microstructures and morphologies were characterized by scanning electron microscope (SEM ), X‐ray powder diffraction (XRD ), transmission electron microscopy (TEM ), and N₂ absorption/desorption isotherms techniques, the obtained Co₃O₄ nanosheets were applied for reversible Li‐storage, displaying larger capacity, better cycling performance and rate capability, i.e., a reversible specific capacity of ca. 800 mAh /g during initial 30 cycles and a reversible capacity of 450 mAh /g at 2C for Co₃O₄ nanosheets, which were almost twice higher than those for Co₃O₄ nanoparticles. The improved cycling stability could be attributed to the remarkable synergistic effects between porous structures and nanosheet‐like morphologies.     

A Reversible Six-Electron Transfer Cathode for Advanced Aqueous Zinc Batteries

The electrochemical reactions for the storage of Zn²⁺ while embracing more electron transfer is a foundation of the future high-energy aqueous zinc batteries. Herein, we report a six-electron transfer electrochemistry of nano-sized TeO₂/C (n-TeO₂/C) cathode by facilitating the reversible conversion of TeO₂↔Te and Te↔ZnTe. Benefitting from the integrated conductive nanostructure and the proton-rich environment in providing optimized electrochemical kinetics (facilitated Zn²⁺ uptake and high electronic conductivity) and feasible thermodynamic process (low Gibbs free energy change), the as-prepared n-TeO₂/C with stable cycling performance exhibits a superior reversible capacity of over 800 mAh g⁻¹ at 0.1 A g⁻¹. A precise understanding of the reaction mechanism via ex situ and in situ characterizations presents that the reversible six-electron transfer reaction is proton-dependent, and a proton generating and consuming mechanism of three-phase conversion n-TeO₂/C in the weakly acidic electrolyte is thoroughly revealed.     

外偶极电场作用下H_2O,D_2O和T_2O的可逆分解电压

采用密度泛函B3P86方法和6-311++G(3df,3pf)基组,计算了在-0.05～0.05a.u.外偶极电场作用下,H2O,D2O,T2O,H2,D2,T2,O2的电子能量、核运动能量和熵值,在此基础上通过计算H2O(g)→H2(g)+O2(g)、D2O(g)→D2(g)+O2(g)、T2O(g)→T2(g)+O2(g)的焓变ΔH、熵变ΔS、Gibbs函数变化ΔG,最后得到了H2O,D2O,T2O的可逆分解电压Er.计算结果表明,外偶极电场存在时,H2O,D2O,T2O的Gibbs自由能变ΔG和可逆分解电压Er都有明显的变化,当外偶极电场正方向增加时,其Gibbs自由能变ΔG和可逆分解电压Er均趋于线性增加;当外偶极电场负方向增加时,其Gibbs自由能变ΔG和可逆分解电压Er均趋于线性减小;在相同外偶极电场作用下,Gibbs自由能变ΔG和可逆分解电压Er随H2O,D2O,T2O依次增加.     

Lithium storage in single-walled carbon nanotubes

Here, we investigated the lithium insertion/extraction mechanism in single-walled carbon nanotubes (SWNTs) based both on the empty SWNTs and filled SWNTs, including ferrocene-filled SWNTs (Fc@SWNTs) and C₆₀-filled SWNTs (C₆₀@SWNTs). SWNTs, C₆₀@SWNTs and Fc@SWNTs were systematically investigated as anode materials for Li-ion batteries. The electrochemical performance of the C₆₀@SWNT electrode was slightly better than that of the SWNTs, and the reversible capacity of Fc@SWNTs per unit weight was ～1.7 times greater than that of the empty SWNTs due to its special tube internal structure. It was proved that the dominant reversible sites for lithium storage in empty SWNTs are the trigonal interstitial channels. Meanwhile, lithium can reversibly insert or extract the inner channels of the tubes after doping with ferrocene; the reversible capacity presented in the inner channels of Fc@SWNTs is about Li_1.13C₆.     

The sum is more than its parts: stability of MnFe oxide nanoparticles supported on oxygen-functionalized multi-walled carbon nanotubes at alternating oxygen reduction reaction and oxygen evolution reaction conditions

Successful design of reversible oxygen electrocatalysts does not only require to consider their activity towards the oxygen reduction (ORR) and the oxygen evolution reactions (OER), but also their electrochemical stability at alternating ORR and OER operating conditions, which is important for potential applications in reversible electrolyzers/fuel cells or metal/air batteries. We show that the combination of catalyst materials containing stable ORR active sites with those containing stable OER active sites may result in a stable ORR/OER catalyst if each of the active components can satisfy the current demand of their respective reaction. We compare the ORR/OER performances of oxides of Mn (stable ORR active sites), Fe (stable OER active sites), and bimetallic Mn_0.5Fe_0.5 (reversible ORR/OER catalyst) supported on oxidized multi-walled carbon nanotubes. Despite the instability of Mn and Fe oxide for the OER and the ORR, respectively, Mn_0.5Fe_0.5 exhibits high stability for both reactions.

     

Effects of Reversible Chemical Reaction on Morphology and Domain Growth of Phase Separating Binary Mixtures with Viscosity Difference

Summary: The effects of a reversible chemical reaction on morphology and dynamics of phase separating binary mixtures with viscosity difference are studied by numerically solving modified time‐dependent Ginzburg‐Landau and Navier‐Stokes equations. Much more interesting morphologies are observed in the system due to the coupling of reversible chemical reaction and viscosity difference between two components. When the chemical reaction rate is relatively low, the impact of viscosity difference on morphologies is prominent, so that the resulting patterns are affected by both reversible chemical reaction and viscosity difference. However, increasing the chemical reaction rate weakens the impact of viscosity difference on morphologies. Similarly, increasing the chemical reaction rate also suppresses the effects of viscosity difference on domain growth dynamics, which is prominent at the early stage of phase separation when the chemical reaction rate is relatively low. For both cases with relatively low and high chemical reaction rates, the average domain size eventually attains an equilibrium value due to the competition between the mixing of reversible chemical reaction and demixing of phase separation.

Domain patterns of a critical system with ϕ_ini = 0, and Γ₁ = Γ₂ = 0.001.