Asymmetric Push–Pull Type Co(II) Porphyrin for Enhanced Electrocatalytic CO2 Reduction Activity

Molecular electrocatalysts for electrochemical carbon dioxide (CO₂) reduction has received more attention both by scientists and engineers, owing to their well-defined structure and tunable electronic property. Metal complexes via coordination with many π-conjugated ligands exhibit the unique electrocatalytic CO₂ reduction performance. The symmetric electronic structure of this metal complex may play an important role in the CO₂ reduction. In this work, two novel dimethoxy substituted asymmetric and cross-symmetric Co(II) porphyrin (PorCo) have been prepared as the model electrocatalyst for CO₂ reduction. Owing to the electron donor effect of methoxy group, the intramolecular charge transfer of these push–pull type molecules facilitates the electron mobility. As electrocatalysts at −0.7 V vs. reversible hydrogen electrode (RHE), asymmetric methoxy-substituted Co(II) porphyrin shows the higher CO₂-to-CO Faradaic efficiency (FE_CO) of ~95 % and turnover frequency (TOF) of 2880 h⁻¹ than those of control materials, due to its push–pull type electronic structure. The density functional theory (DFT) calculation further confirms that methoxy group could ready to decrease to energy level for formation *COOH, leading to high CO₂ reduction performance. This work opens a novel path to the design of molecular catalysts for boosting electrocatalytic CO₂ reduction.     

Effect of PDI ligand binding pattern on the electrocatalytic activity of two Ru(II) complexes for CO2 reduction

The electrochemical properties of two complexes, [Ru^II(η³-(N,N,N)-^OMePDI)Cl₂(PPh₃)]⁰ ( 1 ) and [Ru^II(η²-(C,N)-^OMePDI-H)Cl (PPh₃)₂]⁰ ( 2 ), were studied. In octahedral complex 1 , bis(imino)pyridine (PDI) is a tridentate η³-N,N,N-coordinated ligand, whereas in trigonal-bipyramidal complex 2 , the deprotonated PDI ligand adopts the unusual bidentate binding mode η²-C,N to coordinate to the central Ru(II) ion. Bulk electrolysis in two electrolyte solutions of acetonitrile (MeCN) and tetrahydrofuran (THF) suggests that complexes 1 and 2 have very different electrocatalytic CO₂ reduction activities. In MeCN solution, complex 1 can selectively electrocatalytic CO₂ reduction to CO with a Faradaic efficiency of about 50% and a turnover frequency (TOF) of 4.4 s⁻¹, whereas complex 2 can perform electrocatalytic of CO₂ reduction with a Faraday efficiency of ~22% and a TOF of 0.3 S⁻¹. The electrocatalytic CO₂ reduction selectivity and activity of the two complexes are poor when the solvent is changed to THF. Combined with the results of the density functional theory calculation, we propose that the binding pattern of the redox-active ligand ^OMePDI has a significant effect on the electrocatalytic activity for the two Ru(II)PDI complexes.     

Maximizing Electroactive Sites in a Three-Dimensional Covalent Organic Framework for Significantly Improved Carbon Dioxide Reduction Electrocatalysis

Synthesis of functional 3D COFs with irreversible bond is challenging. Herein, 3D imide-bonded COFs were constructed via the imidization reaction between phthalocyanine-based tetraanhydride and 1,3,5,7-tetra(4-aminophenyl)adamantine. These two 3D COFs are made up of interpenetrated pts networks according to powder X-ray diffraction and gas adsorption analyses. CoPc-PI-COF-3 doped with carbon black has been employed to fabricate the electrocatalytic cathode towards CO₂ reduction reaction within KHCO₃ aqueous solution, displaying the Faradaic efficiency of 88–96 % for the CO₂-to-CO conversion at the voltage range of ca. ?0.60 to ?1.00 V (vs. RHE). In particular, the 3D porous structure of CoPc-PI-COF-3 enables the active electrocatalytic centers occupying 32.7 % of total cobalt-phthalocyanine subunits, thus giving a large current density (j_CO) of ?31.7 mA cm^?2 at ?0.90 V. These two parameters are significantly improved than the excellent 2D COF analogue (CoPc-PI-COF-1, 5.1 % and ?21.2 mA cm^?2).     

Controlled Synthesis of a Vacancy-Defect Single-Atom Catalyst for Boosting CO2 Electroreduction

The reaction of precursors containing both nitrogen and oxygen atoms with Ni^II under 500 °C can generate a N/O mixing coordinated Ni-N₃O single-atom catalyst (SAC) in which the oxygen atom can be gradually removed under high temperature due to the weaker Ni−O interaction, resulting in a vacancy-defect Ni-N₃-V SAC at Ni site under 800 °C. For the reaction of Ni^II with the precursor simply containing nitrogen atoms, only a no-vacancy-defect Ni-N₄ SAC was obtained. Experimental and DFT calculations reveal that the presence of a vacancy-defect in Ni-N₃-V SAC can dramatically boost the electrocatalytic activity for CO₂ reduction, with extremely high CO₂ reduction current density of 65 mA cm⁻² and high Faradaic efficiency over 90 % at −0.9 V vs. RHE, as well as a record high turnover frequency of 1.35×10⁵ h⁻¹, much higher than those of Ni-N₄ SAC, and being one of the best reported electrocatalysts for CO₂-to-CO conversion to date.     

Alternating Metal-Ligand Coordination Improves Electrocatalytic CO2 Reduction by a Mononuclear Ru Catalyst**

Molecular electrocatalysts for CO₂-to-CO conversion often operate at large overpotentials, due to the large barrier for C−O bond cleavage. Illustrated with ruthenium polypyridyl catalysts, we herein propose a mechanistic route that involves one metal center that acts as both Lewis base and Lewis acid at different stages of the catalytic cycle, by density functional theory in corroboration with experimental FTIR. The nucleophilic character of the Ru center manifests itself in the initial attack on CO₂ to form [ Ru -CO₂]⁰, while its electrophilic character allows for the formation of a 5-membered metallacyclic intermediate, [ Ru -CO₂CO₂]^0,c, by addition of a second CO₂ molecule and intramolecular cyclization. The calculated activation barrier for C−O bond cleavage via the metallacycle is decreased by 34.9 kcal mol⁻¹ as compared to the non-cyclic adduct in the two electron reduced state of complex 1 . Such metallacyclic intermediates in electrocatalytic CO₂ reduction offer a new design feature that can be implemented consciously in future catalyst designs.     

Are Two Metal Ions Better than One? Mono- and Binuclear α-Diimine-Re(CO)3 Complexes with Proton-Responsive Ligands in CO2 Reduction Catalysis

Here, the reduction chemistry of mono- and binuclear α-diimine-Re(CO)₃ complexes with proton responsive ligands and their application in the electrochemically-driven CO₂ reduction catalysis are presented. The work was aimed to investigate the impact of 1) two metal ions in close proximity and 2) an internal proton source on catalysis. Therefore, three different Re complexes, a binuclear one with a central phenol unit, 3 , and two mononuclear, one having a central phenol unit, 1 , and one with a methoxy unit, 2 , were utilised. All complexes are active in the CO₂-to-CO conversion and CO is always the major product. The catalytic rate constant k_cat for all three complexes is much higher and the overpotential is lower in DMF/water mixtures than in pure DMF (DMF=N,N-dimethylformamide). Cyclic voltammetry (CV) studies in the absence of substrate revealed that this is due to an accelerated chloride ion loss after initial reduction in DMF/water mixtures in comparison to pure DMF. Chloride ion loss is necessary for subsequent CO₂ binding and this step is around ten times faster in the presence of water [ 2 : k^Cl(DMF)≈1.7 s⁻¹; k^Cl(DMF/H₂O)≈20 s⁻¹]. The binuclear complex 3 with a proton responsive phenol unit is more active than the mononuclear complexes. In the presence of water, the observed rate constant k_obs for 3 is four times higher than of 2 , in the absence of water even ten times. Thus, the two metal centres are beneficial for catalysis. Lastly, the investigation showed that the phenol unit has no impact on the rate of the catalysis, it even slows down the CO₂-to-CO conversion. This is due to an unproductive, competitive side reaction: After initial reduction, 1 and 3 loose either Cl⁻ or undergo a reductive OH deprotonation forming a phenolate unit. The phenolate could bind to the metal centre blocking the sixth coordination site for CO₂ activation. In DMF, O−H bond breaking and Cl⁻ ion loss have similar rate constants [ 1 : k^Cl(DMF)≈2 s⁻¹, k^OH≈1.5 s⁻¹], in water/DMF Cl⁻ loss is much faster. Thus, the effect on the catalytic rate is more pronounced in DMF. However, the acidic protons lower the overpotential of the catalysis by about 150 mV.     

Electrolyte Effects on the Electrochemical Reduction of CO2

The electrochemical reduction of CO₂ to fuels or commodity chemicals is a reaction of high interest for closing the anthropogenic carbon cycle. The role of the electrolyte is of particular interest, as the interplay between the electrocatalytic surface and the electrolyte plays an important role in determining the outcome of the CO₂ reduction reaction. Therefore, insights on electrolyte effects on the electrochemical reduction of CO₂ are pivotal in designing electrochemical devices that are able to efficiently and selectively convert CO₂ into valuable products. Here, we provide an overview of recently obtained insights on electrolyte effects and we discuss how these insights can be used as design parameters for the construction of new electrocatalytic systems.     

Boosting the Proton-coupled Electron Transfer via Fe−P Atomic Pair for Enhanced Electrochemical CO2 Reduction

Single-atom catalysts exhibit superior CO₂-to-CO catalytic activity, but poor kinetics of proton-coupled electron transfer (PCET) steps still limit the overall performance toward the industrial scale. Here, we constructed a Fe−P atom paired catalyst onto nitrogen doped graphitic layer (Fe₁/PNG) to accelerate PCET step. Fe₁/PNG delivers an industrial CO current of 1 A with FE_CO over 90 % at 2.5 V in a membrane-electrode assembly, overperforming the CO current of Fe₁/NG by more than 300 %. We also decrypted the synergistic effects of the P atom in the Fe−P atom pair using operando techniques and density functional theory, revealing that the P atom provides additional adsorption sites for accelerating water dissociation, boosting the hydrogenation of CO₂, and enhancing the activity of CO₂ reduction. This atom-pair catalytic strategy can modulate multiple reactants and intermediates to break through the inherent limitations of single-atom catalysts.     

Catholyte‐Free Electrocatalytic CO2 Reduction to Formate

Electrochemical reduction of carbon dioxide (CO₂) into value‐added chemicals is a promising strategy to reduce CO₂ emission and mitigate climate change. One of the most serious problems in electrocatalytic CO₂ reduction (CO₂R) is the low solubility of CO₂ in an aqueous electrolyte, which significantly limits the cathodic reaction rate. This paper proposes a facile method of catholyte‐free electrocatalytic CO₂ reduction to avoid the solubility limitation using commercial tin nanoparticles as a cathode catalyst. Interestingly, as the reaction temperature rises from 303 K to 363 K, the partial current density (PCD) of formate improves more than two times with 52.9 mA cm^?2, despite the decrease in CO₂ solubility. Furthermore, a significantly high formate concentration of 41.5 g L^?1 is obtained as a one‐path product at 343 K with high PCD (51.7 mA cm^?2) and high Faradaic efficiency (93.3 %) via continuous operation in a full flow cell at a low cell voltage of 2.2 V.     

Cu2O/CuO Electrocatalyst for Electrochemical Reduction of Carbon Dioxide to Methanol

Herein, we report the controlled and direct fabrication of Cu₂O/CuO thin film on the conductive nickel foam using electrodeposition route for the electrochemical reduction of carbon dioxide (CO₂) to methanol. The electrocatalytic reduction was performed in CO₂ saturated aqueous solution consisting of KHCO₃, pyridine and HCl at room temperature. CO₂ reduction was carried out at a constant potential of −1.3 V for 120 min to study the electrochemical performance of the prepared electrocatalysts. Cu₂O/CuO shows better electrocatalytic activity with highest current density of 46 mA/cm². The prepared catalyst can be an efficient and selective electrode for the production of methanol.     

Boosting Electroreduction of CO2 over Cationic Covalent Organic Frameworks: Hydrogen Bonding Effects of Halogen Ions

We present the first example of charged imidazolium functionalized porphyrin-based covalent organic framework (Co-iBFBim-COF-X) for electrocatalytic CO₂ reduction reaction, where the free anions (e.g., F⁻, Cl⁻, Br⁻, and I⁻) of imidazolium ions nearby the active Co sites can stabilize the key intermediate *COOH and inhibit hydrogen evolution reaction. Thus, Co-iBFBim-COF-X exhibits higher activity than the neutral Co-BFBim-COF, following the trend of F⁻<Cl⁻<Br⁻<I⁻. Particularly, the Co-iBFBim-COF-I⁻ showed nearly 100 % CO₂ selectivity at a low full-cell voltage of 2.3 V, and achieved a high CO₂ partial current density of 52 mA cm⁻² with a turnover frequency of 3018 h⁻¹ at 2.4 V in the anion membrane electrode assembly, which is 3.57 times larger than that of neutral Co-BFBim-COF. This work provides new insight into the importance of free anions in the stabilization of intermediates and decreasing the local binding energy of H₂O with active moiety to enhance CO₂ reduction reaction.     

DFT and Empirical Considerations on Electrocatalytic Water/Carbon Dioxide Reduction by CoTMPyP in Neutral Aqueous Solutions**

A combined experimental and density functional theory (DFT) investigation was employed in order to examine the mechanism of electrochemical CO₂ reduction and H₂ formation from water reduction in neutral aqueous solutions. A water soluble cobalt porphyrin, cobalt [5,10,15,20-(tetra-N-methyl-4-pyridyl)porphyrin], (CoTMPyP), was used as catalyst. The possible attachment of different axial ligands as well as their effect on the electrocatalytic cycles were examined. A cobalt porphyrin hydride is a key intermediate which is generated after the initial reduction of the catalyst. The hydride is involved in the formation of H₂ and formate and acts as an indirect proton source for the formation of CO in these H⁺-starving conditions. The experimental results are in agreement with the computations and give new insights into electrocatalytic mechanisms involving water soluble metalloporphyrins. We conclude that in addition to the porphyrin's structure and metal ion center, the electrolyte surroundings play a key role in dictating the products of CO₂/H₂O reduction.     

Semiconductor/Covalent-Organic-Framework Z-Scheme Heterojunctions for Artificial Photosynthesis

A strategy to covalently connect crystalline covalent organic frameworks (COFs) with semiconductors to create stable organic–inorganic Z-scheme heterojunctions for artificial photosynthesis is presented. A series of COF–semiconductor Z-scheme photocatalysts combining water-oxidation semiconductors (TiO₂, Bi₂WO₆, and α-Fe₂O₃) with CO₂ reduction COFs (COF-316/318) was synthesized and exhibited high photocatalytic CO₂-to-CO conversion efficiencies (up to 69.67 μmol g⁻¹ h⁻¹), with H₂O as the electron donor in the gas–solid CO₂ reduction, without additional photosensitizers and sacrificial agents. This is the first report of covalently bonded COF/inorganic-semiconductor systems utilizing the Z-scheme applied for artificial photosynthesis. Experiments and calculations confirmed efficient semiconductor-to-COF electron transfer by covalent coupling, resulting in electron accumulation in the cyano/pyridine moieties of the COF for CO₂ reduction and holes in the semiconductor for H₂O oxidation, thus mimicking natural photosynthesis.     

Efficient Visible‐Light‐Driven Carbon Dioxide Reduction by a Single‐Atom Implanted Metal–Organic Framework

Modular optimization of metal–organic frameworks (MOFs) was realized by incorporation of coordinatively unsaturated single atoms in a MOF matrix. The newly developed MOF can selectively capture and photoreduce CO₂ with high efficiency under visible‐light irradiation. Mechanistic investigation reveals that the presence of single Co atoms in the MOF can greatly boost the electron–hole separation efficiency in porphyrin units. Directional migration of photogenerated excitons from porphyrin to catalytic Co centers was witnessed, thereby achieving supply of long‐lived electrons for the reduction of CO₂ molecules adsorbed on Co centers. As a direct result, porphyrin MOF comprising atomically dispersed catalytic centers exhibits significantly enhanced photocatalytic conversion of CO₂, which is equivalent to a 3.13‐fold improvement in CO evolution rate (200.6 μmol g^?1 h^?1) and a 5.93‐fold enhancement in CH₄ generation rate (36.67 μmol g^?1 h^?1) compared to the parent MOF.     

Visible Light-Driven Conversion of Carbon-Sequestrated Seawater into Stoichiometric CO and HClO with Nitrogen-Doped BiOCl Atomic Layers

Seawater is one of the most important CO₂ sequestration media for delivering value-added chemicals/fuels and active chlorine; however, this scenario is plagued by sluggish reaction rates and poor product selectivity. Herein, we first report the synthesis of nitrogen-doped BiOCl atomic layers to directly split carbon-sequestrated natural seawater (Yellow Sea, China) into stoichiometric CO (92.8 μmol h⁻¹) and HClO (83.2 μmol h⁻¹) under visible light with selectivities greater than 90 %. Photoelectrons enriched on the exposed BiOCl{001} facet kinetically facilitate CO₂-to-CO reduction via surface-doped nitrogen bearing Lewis basicity. Photoholes, mainly located on the lateral facets of van der Waals gaps, promote the selective oxidation of Cl⁻ into HClO. Sequestrated CO₂ also maintains the pH of seawater at around 4.2 to prevent the alkaline earth cations from precipitating. The produced HClO can effectively kill typical bacteria in the ballast water of ocean-going cargo ships, offering a green and safe way for onsite sterilization.     

Efficient Reduction of CO2 into Formic Acid on a Lead or Tin Electrode using an Ionic Liquid Catholyte Mixture

Highly efficient electrochemical reduction of CO₂ into value‐added chemicals using cheap and easily prepared electrodes is environmentally and economically compelling. The first work on the electrocatalytic reduction of CO₂ in ternary electrolytes containing ionic liquid, organic solvent, and H₂O is described. Addition of a small amount of H₂O to an ionic liquid/acetonitrile electrolyte mixture significantly enhanced the efficiency of the electrochemical reduction of CO₂ into formic acid (HCOOH) on a Pb or Sn electrode, and the efficiency was extremely high using an ionic liquid/acetonitrile/H₂O ternary mixture. The partial current density for HCOOH reached 37.6 mA cm^?2 at a Faradaic efficiency of 91.6 %, which is much higher than all values reported to date for this reaction, including those using homogeneous and noble metal electrocatalysts. The reasons for such high efficiency were investigated using controlled experiments.     

Prolonging the Triplet State Lifetimes of Rhenium Complexes with Imidazole-Pyridine Framework for Efficient CO2 Photoreduction

The photocatalytic reduction of CO₂ into fuels offers the prospect for creating a new CO₂ economy. Harnessing visible light-driven CO₂-to-CO reduction mediated by the long-lived triplet excited state of rhenium(I) tricarbonyl complexes is a challenging approach. We here develop a series of new mononuclear rhenium(I) tricarbonyl complexes ( Re-1 − Re-4 ) based on the imidazole-pyridine skeleton for photo-driven CO₂ reduction. These catalysts are featured by combining pyridyl-imidazole with the aromatic ring and different pendant organic groups onto the N1 position of 1,3-imidazole unit, which display phosphorescence under Ar-saturated solution even at ambient conditions. By contrast, {Re[9-(pyren-1-yl)-10-(pyridin-2-yl)-9H-pyreno[4,5-d]imidazole)](CO)₃Cl} ( Re-4 ) by introducing pyrene ring at the N1 position of pyrene-fused imidazole unit exhibits superior catalytic performance with a higher turnover number for CO (TON_CO=124) and >99.9 % selectivity, primarily ascribed to the strong visible light-harvesting ability, long-lived triplet lifetimes (164.2 μs) and large reductive quenching constant. Moreover, the rhenium(I) tricarbonyl complexes derived from π-extended pyrene chromophore exhibit a long lifetime corresponding to its ligand-localized triplet state (³IL) evidenced from spectroscopic investigations and DFT calculations.     

Surface Reconstruction of Ultrathin Palladium Nanosheets during Electrocatalytic CO2 Reduction

A surface reconstructing phenomenon is discovered on a defect-rich ultrathin Pd nanosheet catalyst for aqueous CO₂ electroreduction. The pristine nanosheets with dominant (111) facet sites are transformed into crumpled sheet-like structures prevalent in electrocatalytically active (100) sites. The reconstruction increases the density of active sites and reduces the CO binding strength on Pd surfaces, remarkably promoting the CO₂ reduction to CO. A high CO Faradaic efficiency of 93 % is achieved with a site-specific activity of 6.6 mA cm⁻² at a moderate overpotential of 590 mV on the reconstructed 50 nm Pd nanosheets. Experimental and theoretical studies suggest the CO intermediate as a key factor driving the structural transformation during CO₂ reduction. This study highlights the dynamic nature of defective metal nanosheets under reaction conditions and suggests new opportunities in surface engineering of 2D metal nanostructures to tune their electrocatalytic performance.     

One-step synthesis of ultra-small amount of Pd-Alloyed Zinc Nanosheets for efficient electrochemical CO2 reduction to CO

The practicality of the electrochemical CO₂ reduction technique depends on the development of cost-effective, robust, and highly selective catalysts. To achieve this goal, we have engineered self-supported 3D electrodes composed of Pd-Zn nanosheets (NSs) for CO₂ electrochemical reduction to CO with minimal Pd content. This innovative electrode with an increased surface area was created using an electrodeposition method employing a dynamic hydrogen bubble template. By precisely adjusting the Pd content, we improved the thickness, porosity, and surface area of the electrodes, resulting in a CO₂-to-CO selectivity reaching as high as 88.5 %, with an average of at least 80 % sustained over 10 hours. This remarkable improved activity can be attributed to the synergistic effects of an appropriate Pd/Zn atomic ratio as well as to the large surface area of nanosheets structures with rich edge active sites. Furthermore, to get around the limitations of CO₂ mass transfer, reactions were done at high pressures conditions ranging from 3 to 9.5 bar; this strategic approach yielded an outstanding partial current density of −304.6 mA cm⁻² for CO. These noteworthy findings establish concepts for constructing effective and earth-abundant CO-producing electrocatalysts.     

室温快速合成Ag基金属有机骨架材料用于电催化还原CO2

选择具有强给电子能力的1,2,4-三唑为配体,成功合成了银基金属有机骨架材料(Ag-MOF)并用于电催化还原CO₂反应(CO₂RR)。借助粉末X射线衍射、透射电子显微镜、扫描电子显微镜、计时电流法等表征手段对材料的晶体结构、形貌和电催化CO₂RR性能进行了系统的研究。与商品化的纳米Ag颗粒对比,Ag-MOF展现出更优异的电催化CO₂RR产物选择性、催化活性和稳定性,在-0.9 V (vs RHE)时,CO的法拉第效率高达96.1%。当电压为-1.1 V (vs RHE)时,电流密度可达17 mA·cm^-2,且电极可以稳定运行300 min。这说明通过选择合适的配体结构,可以改变催化位点周围的化学环境,从而高效将CO₂转化为目标产物。