Quantitative GC–MS Analysis of Artificially Aged Paints with Variable Pigment and Linseed Oil Ratios

In this study, quantitative gas chromatography–mass spectrometry (GC–MS) analysis was used to evaluate the influence of pigment concentration on the drying of oil paints. Seven sets of artificially aged self-made paints with different pigments (yellow ochre, red ochre, natural cinnabar, zinc white, Prussian blue, chrome oxide green, hematite + kaolinite) and linseed oil mixtures were analysed. In the pigment + linseed oil mixtures, linseed oil concentration varied in the range of 10 to 95 g/100 g. The results demonstrate that the commonly used palmitic acid to stearic acid ratio (P/S) to distinguish between drying oils varied in a vast range (from especially low 0.6 to a common 1.6) even though the paints contained the same linseed oil. Therefore, the P/S ratio is an unreliable parameter, and other criteria should be included for confirmation. The pigment concentration had a substantial effect on the values used to characterise the degree of drying (azelaic acid to palmitic acid ratio (A/P) and the relative content of dicarboxylic acids (∑D)). The absolute quantification showed that almost all oil paint mock-ups were influenced by pigment concentration. Therefore, pigment concentration needs to be considered as another factor when characterising oil-based paint samples based on the lipid profile.     

A DSC study of the effect of lead pigments on the drying of cold pressed linseed oil

Cold pressed linseed oil and paints prepared using the inorganic pigments; lead white and red lead, were characterized using non-isothermal differential scanning calorimetry (DSC) in an air atmosphere to determine the effect of the pigment on the oxidative polymerisation of the drying oil medium. For each paint sample, the onset temperature for oxidation was reduced from 166°C to the range 50 to 60°C when a heating rate of 5 K min^-1 was used. In order to determine the rate of drying, the non-isothermal experiments were carried out using a range of heating rates. A change in the mechanism oxidative polymerization was observed as the heating rate was increased.     

Lead(II) Formate in Rembrandt's Night Watch: Detection and Distribution from the Macro- to the Micro-scale

The Night Watch, painted in 1642 and on view in the Rijksmuseum in Amsterdam, is considered Rembrandt's most famous work. X-ray powder diffraction (XRPD) mapping at multiple length scales revealed the unusual presence of lead(II) formate, Pb(HCOO)₂, in several areas of the painting. Until now, this compound was never reported in historical oil paints. In order to get insights into this phenomenon, one possible chemical pathway was explored thanks to the preparation and micro-analysis of model oil paint media prepared by heating linseed oil and lead(II) oxide (PbO) drier as described in 17^th century recipes. Synchrotron radiation based micro-XRPD (SR-μ-XRPD) and infrared microscopy were combined to identify and map at the micro-scale various neo-formed lead-based compounds in these model samples. Both lead(II) formate and lead(II) formate hydroxide Pb(HCOO)(OH) were detected and mapped, providing new clues regarding the reactivity of lead driers in oil matrices in historical paintings.     

Review of the use of NMR spectroscopy to investigate structure,reactivity, and dynamics of lead soap formation in paintings

Heavy metal carboxylate or soap formation is a widespread deterioration problem affecting oil paintings and other works of art bearing oil-based media. Lead soaps are prevalent in traditional oil paintings because lead white was the white pigment most frequently chosen by old masters for the paints and in some cases for the ground preparations, until the development of other white pigments from approximately the middle of the 18th century on, and because of the wide use of lead-tin yellow. In the latter part of the 19th century, lead white began to be replaced by zinc white. The factors that influence soap formation have been the focus of intense study starting in the late 1990s. Since 2014, nuclear magnetic resonance (NMR) studies have contributed a unique perspective on the issue by providing chemical, structural, and dynamic information about the species involved in the process, as well as the effects of environmental conditions such as relative humidity and temperature on the kinetics of the reaction(s). In this review, we explore recent insights into soap formation gained through solid-state NMR and single-sided NMR techniques.     

The ageing of model pigment/linseed oil systems studied by means of vibrational spectroscopies and chemometrics

We used Fourier Transform - Near Infrared (FT-NIR) and micro-Raman spectroscopies to follow the changes occurring in a thin layer of linseed oil in the presence of lead white (basic lead carbonate) and zinc white (zinc oxide), which were due to the natural ageing process.The curing of linseed oil is a very complicated process, owing to different mechanisms that occur simultaneously, ones which may be further modified by the presence of pigments and by environmental conditions (e.g. light, humidity, temperature). Both lead white and zinc white pigments affect this process, leading to the formation of films with different properties. Previous studies have already characterised the ageing of binders alone, including linseed oil. We investigated, by means of a combined analysis of the results of two different vibrational spectroscopy methods, the role of these two white pigments on the ageing of a linseed oil film. Model samples were prepared, and we followed their evolution over a 24-month period. Two ten-year-old oil mock-ups, which were prepared by using lead and zinc white pigments (comparable to contemporary oil painting), were analysed within the framework of the present results.Lastly, we exploited the potentiality of Principal Component Analysis (PCA) on the combined FT-NIR and Raman spectra in order to define a possible ageing trend for two oil-white mixtures. Furthermore, we tested the statistical models by comparison with spectra related to the two ten-year-old mock-ups.     

Synthesis and Characterization of Polymeric Materials from Vegetable Oils

Although the petrochemical polymers have revolutionized the technological development, the intensive use of these materials have contributed to the global pollution. In this context, researches involving ecofriendliness materials are growing up, as well as, a current interest in developing materials from inexpensive and renewable resources, such as vegetable oils. In this work, is described the synthesis of polymeric materials by thermal polymerization from linseed oil (Linum usitatissimum L.) and passion fruit oil (Passiflora edulis) and their characterization by gas chromatographic (GC), Fourier transform infrared (FTIR) spectroscopy, solubility in organic solvents, thermogravimetry (TG), differential scanning calorimetry (DSC) and Raman spectroscopy. The TG curve shows that those polymeric materials present two stages of decomposition. DSC plots of the vegetable oils showed some endothermic and exothermic transitions which are not present in the DSC curves corresponding to oil-based polymers. The Raman spectra of the polymers indicate declining of absorbance in the region of CC stretching (∼1600 cm⁻¹). This absorption was used to estimate the degree of polymerization (79% and 67.5% for linseed and passion fruit oils, respectively).     

低场核磁共振法对油基钻井液乳状液乳滴稳定性的研究

采用低场核磁共振技术,针对油基钻井液油包水型乳状液乳滴的稳定性进行研究。引入弛豫试剂Mn Cl2·4H2O对W/Q型乳状液的T2分布曲线进行定性分析,位于10~1 000 ms之间的弛豫峰对应于中度可自由移动水和白油弛豫峰的叠合峰,定义为乳状液弛豫峰;1 000~10 000 ms之间的峰为高度可自由移动水的弛豫峰。基于此,以弛豫峰峰形为定性指标,弛豫峰面积比率和弛豫峰间距为定量指标,针对弛豫试剂、油水比和老化温度等因素对乳状液横向弛豫时间T2分布曲线的影响进行了分析,进而深入研究了其对油基钻井液乳状液乳滴稳定性的影响。还将低场核磁共振分析技术运用于油基钻井液乳状液体系相对含油率的测量。结果表明,低场核磁共振是一种高效、快捷、准确反映油基钻井液乳状液稳定性的分析测试技术,同时,还可用于油基钻井液乳状液或原油相对含油率的测量。     

Attenuated total reflection micro FTIR characterisation of pigment–binder interaction in reconstructed paint films

The interaction of pigments and binding media may result in the production of metal soaps on the surface of paintings which modifies their visible appearance and state of conservation. To characterise more fully the metal soaps found on paintings, several historically accurate oil and egg yolk tempera paint reconstructions made with different pigments and naturally aged for 10 years were submitted to attenuated total reflectance Fourier transform infrared (ATR FTIR) microspectroscopic analyses. Standard metal palmitates were synthesised and their ATR spectra recorded in order to help the identification of metal soaps. Among the different lead-based pigments, red lead and litharge seemed to produce a larger amount of carboxylates compared with lead white, Naples yellow and lead tin yellow paints. Oil and egg tempera litharge and red lead paints appeared to be degraded into lead carbonate, a phenomenon which has been observed for the first time. The formation of metal soaps was confirmed on both oil and egg tempera paints based on zinc, manganese and copper and in particular on azurite paints. ATR mapping analyses showed how the areas where copper carboxylates were present coincided with those in which azurite was converted into malachite. Furthermore, the key role played by manganese in the production of metals soaps on burnt and raw sienna and burnt and raw umber paints has been observed for the first time. The formation of copper, lead, manganese, cadmium and zinc metal soaps was also identified on egg tempera paint reconstructions even though, in this case, the overlapping of the spectral region of the amide II band with that of metal carboxylates made their identification difficult.     

Synthesis and Characterization of a Bio-Based Resin from Linseed Oil

Summary: The use of renewable raw materials in the polymer industries is becoming increasingly popular because of environmental concerns and the need to substitute fossil resources. Plant oils with triglyceride backbones can be chemically modified and used to synthesize polymers from renewable resources (biopolymers). In the present study, linseed oil was epoxidized using a chemo-enzymatic method based on Candida Antarctica lipase B (CALB) as a biocatalyst and the modified linseed oil was cured using maleinated linseed oil and a commercial polyamide resin. The amount of epoxidation achieved depended on the amount of lipase used and was determined by infrared (IR) and nuclear magnetic resonance (NMR) spectroscopies. With 20% (weight per weight) catalyst concentration based on the wt % of oil a degree of epoxidation of > 90% was achieved. The cross-linking reaction of epoxidized linseed oil with the maleinated linseed oil and the polyamide resin was studied using differential scanning calorimetry (DSC). DSC traces showed that an increase in epoxidation degree lead to larger values for the exothermic enthalpy integrals of the curing reactions and hence to a higher reactivity of the linseed oil towards the cross-linking agents.     

Development of completely bio‐based epoxy networks derived from epoxidized linseed and castor oil cured with citric acid

Bio‐based epoxy resins were synthesized from nonedible resources like linseed oil and castor oil. Both the oils were epoxidized through in situ method and characterized via Fourier transform infrared and ¹H‐NMR. These epoxidized oils were crosslinked with citric acid without using any catalyst and their properties compared with diglycidyl ether of bisphenol A‐epoxy. The tensile strength and modulus of epoxidized linseed oil (ELO) were found to be more than those of epoxidized castor oil (ECO)‐based network. However, elongation at break of ECO was significantly higher than that of both ELO and epoxy, which reveals its improved flexibility and toughened nature. Thermogravimetric analysis revealed that the thermal degradation of ELO‐based network is similar to that of petro‐based epoxy. Dynamic mechanical analysis revealed moderate storage modulus and broader loss tangent curve of bio‐based epoxies confirming superior damping properties. Bioepoxies exhibit nearly similar contact angle as epoxy and display good chemical resistant. The preparation method does not involve the use of any toxic catalyst and more hazardous solvents, thus being eco‐friendly.     

Synthesis and Characterization of Boron Incorporated Polyester Polyol from Linseed Oil: A Sustainable Material

Polyols obtained from seed oils have established themselves as excellent building blocks of polymers, viz. polyurethanes. In this work, a novel attempt has been made to incorporate boron in the backbone of polyol [LPO] derived from linseed oil. Furthermore, LPO was treated with phthalic anhydride [PA] and boric acid [BA] (in different molar ratios) to obtain boron incorporated linseed polyester polyols [BPPEs] through solvent less synthesis process. BPPEs were characterized by spectroscopic techniques (IR, ¹H NMR and ¹³C NMR) to confirm the incorporation of boron and also to elucidate their structures. Physico-chemical characterization and antibacterial behavior of BPPEs was also investigated. It is speculated that these resins may serve as excellent raw materials for adhesives, coatings and as antibacterial agents.     

Development of wood protective polyurethane coatings from mahua oil-based polyetheramide polyol: a renewable approach

The present work reports the preparation of wood protective polyurethane (PU) from mahua oil-based polyetheramide polyol and its performance evaluation. The synthesis of polyetheramide polyol was carried out in two steps: the first step deals with the synthesis of mahua oil fatty amide (MFA) from mahua oil by base catalyzed aminolysis reaction and the second step deals with the synthesis of polyetheramide polyol from diglycidyl ether of bisphenol-A (DGEBA) and MFA. The structure of the synthesized polyetheramide polyol was confirmed by the Attenuated total reflection fourier transform infrared (ATR-FTIR) and proton nuclear magnetic resonance (¹H NMR) spectroscopy. The synthesized polyetheramide polyol was used as a precursor for the wood protective PU coatings. The performance of the prepared wood protective PU coatings was evaluated by the measurements of the various performance properties. The results reveal that mechanical, thermal, and microbial properties of the prepared PUs are satisfactory compared to other literature reported vegetable oil-based PUs; whereas, water, solvent, and chemical resistance of the prepared PUs are quite good. The study concludes that mahua oil-based polyetheramide polyol is a suitable precursor for the preparation of wood protective PU.     

Stabilization effects of carboxylate on pyrotechnic compositions including Mg powder in water

Magnesium powder is a common fuel in the field of pyrotechnics. The metal corrodes easily under wet conditions. This can lead to problems such as spontaneous ignition and deterioration of combustion performance when the powder is used in humid areas. For pyrotechnic compositions containing magnesium, harmful stabilizers are often used. In this study, we researched a less harmful replacement for the stabilizer and selected linseed oil, which is used as cooking oil. Experiments were conducted to examine linseed oil’s stabilization effects against magnesium corrosion when it is in contact with an oxidizer under humid conditions by coating magnesium powder and soaking it in aqueous oxidizer solutions. The oxidation of linseed oil led to its polymerization, because of which the stabilizing effect of linseed oil was lost. Stearic acid, which is a saturated fatty acid, was also examined for its stabilizing effects. Melted stearic acid was mixed with magnesium, and coating of stearic acid on magnesium particles was confirmed. The effect of stearic acid coating is more prominent than that of simple mixing of stearic acid with Mg. The stabilization effect of linseed oil and stearic acid coating shows that unharmful organic stabilizers can also be used in pyrotechnic compositions containing Mg.

     

Development of toughened bio‐based epoxy with epoxidized linseed oil as reactive diluent and cured with bio‐renewable crosslinker

In the current work, renewable resourced toughened epoxy blend has been developed using epoxidized linseed oil (ELO) and bio‐based crosslinker. Epoxidation of linseed oil was confirmed through FTIR and ¹H NMR spectra. The ELO bio‐resin was blended at different compositions (10, 20, and 30 phr) with a petroleum‐based epoxy (DGEBA) as reactive diluent to reduce the viscosity for better processibility and cured with cardanol‐derived phenalkamine to overcome the brittleness. The flow behavior of the neat epoxy and modified bio‐epoxy resin blend systems was analyzed by Cross model at low and high shear rates. The tensile and impact behavior studies revealed that the toughened bio‐epoxy blend with 20 to 30 phr of ELO showed moderate stiffness with much higher elongation at break 7% to 13%. Incorporation of higher amount of ELO (20 to 30 phr) increases enthalpy of curing without affecting peak temperature of curing. The thermal degradation behavior of the ELO based blends exhibits similar trend as neat epoxy. The higher intensity or broadened loss tangent curve of bio‐epoxy blends revealed higher damping ability. FE‐SEM analysis showed a rough and rippled surface of bio‐based epoxy blends ensuring effective toughening. Reduced viscosity of resin due to maximum possible incorporation of bio‐resin and use of phenalkamine as curing agent leads to an eco‐friendly toughened epoxy and can be useful for specific coating and structural application.     

13C-Isotope ratio mass spectrometry as a potential tool for the forensic analysis of white architectural paint: a preliminary study

Paints have a dual role in society, to protect materials from environmental agents such as ultraviolet light, moisture and oxygen, and to make painted materials look more attractive. Variability in paint samples is often due to binder and pigment type within the sample. The most common resin used in decorative paints is drying oil alkyd resin, which incorporates soybean oil and vinyl acrylic based latexes. Traditional analytical methods used by forensic scientists may be able to say whether two paint samples are indistinguishable but cannot conclusively say that they both originate from the same source. To find out if isotopic composition can provide an added dimension of information, 28 different white architectural paints were analysed for (13)C abundance using isotope ratio mass spectrometry. In addition, variations in application, drying time and thickness were also investigated to assess the discriminatory power of (13)C data from white paints with an unknown history. Preliminary results indicate that this method could aid screening of paint samples.     

Submicron Size Formulation of Linseed Oil Containing Omega-3 Fatty Acid for Topical Delivery

The aim of the present study was to design and develop topical submicron size gel formulation of linseed oil with enhanced permeation through the skin for the management of psoriasis. Linseed oil contains significant amount of α-linolenic acid (ALA) an omega-3 fatty acid, which is responsible for its pharmacological actions. In order to enhance permeation through skin, microemulsion based gel formulation was prepared and characterized. Microemulsions were prepared by aqueous phase titration method, using linseed oil, Unitop 100, PEG 400, and distilled water as the oil phase, surfactant, cosurfactant and aqueous phase, respectively. Selected formulations were subjected to physical stability studies and consequently in vitro skin permeation studies. Surface morphology studies of optimized formulation were done by transmission electron microscopy (TEM). The droplet size of microemulsions ranged from 70 to 500 nm with average particle size 186 nm. The optimized microemulsion was converted into hydrogel using carbopol 971 which had a viscosity of 498 ± 0.04 cps. During in vitro permeation study the flux of microemulsion formulation and gel was found to be 19.05 and 10.2 µg/cm²/hr, respectively, which indicated better penetration of linseed oil through the skin. These result indicated that the developed ME formulation may be a good approach for topical therapy for the management of psoriasis.     

Quantitative evaluation on oil diffusion mechanisms in nano‐organic‐montmorillonite modified caster oil‐based polyurethane foam for oil/water separation

To improve the oil absorbency of caster oil‐based polyurethane foam, nano‐organic‐montmorillonite (OMMT) was used for the additives. The aim of this study is to evaluate the oil diffusion mechanism and dispersion uniformity of OMMT modified caster oil‐based polyurethane (MPU) using experiments and molecular dynamic simulation. Molecule movement and molecule trajectory of oil was investigated by molecular dynamic simulation and numerical simulation. According to the quantitative analyzing results, the diffusion model was put forward. The average diffusion coefficient of crude oil in 0, 1, 2 wt%, 4, and 6 wt% MPU is 2.4 × 10^?4 cm²/s, 2.6 × 10^?4 cm²/s, 3.0 × 10^?4 cm²/s, 3.2 × 10^?4 cm²/s, and 3.3 × 10^?4 cm²/s, respectively. It indicated that crude oil appeared gradient in the MPU. The optimal diffusion direction of crude oil is (0, 0, 1) crystal face, and the small particles of crude oil are easy to be adsorbed. The two‐dimensional diffusion trajectory of crude oil is nonlinear. The diffusion model includes the diffusion of crude oil at the interface of oil and polyurethane, surface diffusion and pore diffusion, and pore adsorption. Furthermore, the diffusion model showed that the van der Waals force was the main reason for crude oil diffusion or adsorption. OMMT could improve the ability of oil/water separation of polyurethane.     

Raman and FTIR microspectroscopic study of the alteration of Chinese tung oil and related drying oils during ageing

Tung oil is favoured in applications such as historic wood consolidation or as varnish component that require a rapid-drying medium compared with linseed oil and other analogues such as walnut oil and poppy seed oil. The Raman spectra of tung oil and artificially aged specimens have been obtained and indicate that severe degradation of the C=C unsaturation sites occurs compared with the slower-drying linseed oil. Characteristic spectral signatures of fresh tung oil have been identified which provide diagnostic discrimination between this oil and others used in the preparation and preservation of artworks. Mid-infrared spectra of aged tung oils have served to identify the formation of acidic functionalities which could affect associated pigments and substrates in artwork. Comparative spectra are also reported for a range of other oils such as walnut seed, poppy and sunflower seed oils.     

Thermal analysis of the interaction of inorganic pigments with p(nBA/MMA) acrylic emulsion before and after UV ageing

Differential scanning calorimetry (DSC) and thermogravimetry (TG) analyses were used to investigate the influence of inorganic pigments on the photo-oxidative stability of an acrylic emulsion binding medium. For this purpose, three different types of inorganic pigments such as ultramarine blue, cadmium red and hydrated chromium oxide green were selected and mixed with an acrylic emulsion binding medium of poly(n-butyl acrylate/methyl methacrylate). These laboratory mixed paints were analysed before and after UV exposure for different periods of time. In addition, three acrylic commercial paints such as ultramarine blue, cadmium red and chromium oxide green from Liquitex^® and Rembrandt^® companies were also analysed. The results obtained with both thermal techniques suggested that ultramarine blue has the strongest influence on the photo-oxidative stability of the binding medium. A higher increase of the glass transition temperature T _g was observed by DSC analysis on the UV aged binder mixed with ultramarine blue. This result was confirmed by the TG investigations that showed a gradual decrease of the initial temperature of degradation as well as the strongest decrease of the final mass% of the organic compounds. Similar results were measured from the Liquitex^® and Rembrandt^® blue paints.     

Linseed oil‐based reactive diluents preparation to improve tetra‐functional epoxy resin properties

Two kinds of bio‐resourced reactive diluents have been synthesized from linseed oil. The prepared epoxidized linseed oil (ELO) and the cyclocarbonated linseed oil (CLO) were separately blended with a petroleum‐based tetra‐functional epoxy resin (TGDDM) to improve its processability and to overcome the brittleness of the thermoset network therefrom. The linseed oil modifications were spectrally established, and processability improvement of the resin blends was rheologically confirmed. The curing of samples was studied by differential scanning calorimetry, and their mechanical properties (ie, tensile, flexural, fracture toughness, and adhesion) were investigated as well. Scanning electron microscopy images were obtained to reconfirm the toughness improvement of the modified thermosets. In contrast of the epoxidized soybean oil (ie, the most conventionally studied bio‐based reactive diluent), ELO and CLO had no negative effects on the thermoset material characteristics. They improved properties such as tensile strength (up to 43.2 MPa), fracture toughness (1.1 MPa m^1/2), and peel‐adhesion strength (4.5 N/25 mm). It was concluded that ELO and CLO were efficient reactive diluents to be used in formulations of polymer composites, surface coatings, and structural adhesives based on epoxy resins.