Covalent attachments of boron nitride nanotubes through a carboxylic linker: Density functional studies

Properties of attached boron nitride (BN) nanotubes based on linking two zigzag nanotubes through a carboxylic (–(CO)O–) linker were investigated by performing density functional theory (DFT) calculations. The linking boron and nitrogen atoms at the edges of two zigzag BN nanotubes were linked to the –(C]O)O– linker to make possible the attachments of two BN nanotubes together. Total energies, energy gaps, dipole moments, linking bond lengths and angles, and quadrupole coupling constants were obtained for the optimized structures to determine the properties of the attached BN nanotubes. The results indicated that different properties could be seen for the investigated models based on their linking status. For quadrupole coupling constants, the most significant changes of parameters were observed for the linking atoms among the investigated models of attached BN nanotubes.     

BCN: A Graphene Analogue with Remarkable Adsorptive Properties

A new analogue of graphene containing boron, carbon and nitrogen (BCN) has been obtained by the reaction of high‐surface‐area activated charcoal with a mixture of boric acid and urea at 900 °C. X‐ray photoelectron spectroscopy and electron energy‐loss spectroscopy reveal the composition to be close to BCN. The X‐ray diffraction pattern, high‐resolution electron microscopy images and Raman spectrum indicate the presence of graphite‐type layers with low sheet‐to‐sheet registry. Atomic force microscopy reveals the sample to consist of two to three layers of BCN, as in a few‐layer graphene. BCN exhibits more electrical resistivity than graphene, but weaker magnetic features. BCN exhibits a surface area of 2911 m² g^?1, which is the highest value known for a B_xC_yN_z composition. It exhibits high propensity for adsorbing CO₂ (≈100 wt %) at 195 K and a hydrogen uptake of 2.6 wt % at 77 K. A first‐principles pseudopotential‐based DFT study shows the stable structure to consist of BN₃ and NB₃ motifs. The calculations also suggest the strongest CO₂ adsorption to occur with a binding energy of 3.7 kJ mol^?1 compared with 2.0 kJ mol^?1 on graphene.     

Effects of boron nitride nanopowder on thermal,chemical and gas barrier properties of starch

Starch/boron nitride （starch/BN） bionanocomposites were prepared with the reinforcement of boron nitride nano powder by solution technique. The dispersion of BN in the starch was achieved by a continuous sonication process. The interaction between starch and boron nitride nanopowder was investigated by Fourier transform infrared （FTIR） spectroscopy. The structural properties of starch/BN bionanocomposites was studied by X-ray diffraction （XRD）. The high resolution transmission electron microscopy （HRTEM） was used for the study of dispersion of boron nitride in starch matrix and diffraction patterns were studied by selected area electron diffraction （SAED）. Thermal stability of the starch was increased with rising concentrations of boron nitride due to incorporation of rigid nano BN with starch matrix. The substantial reduction in oxygen permeability was obtained by increasing the concentration of BN. The biodegradability of synthesized bionanocomposites was measured by using activated sludge water. Further, it was noticed that, starch/BN bionanocomposites are resistant towards inorganic acids and bases. The tensile strength of starch/BN bionanocomposites was increased whereas; the water resistance property of the materials was decreased with increasing BN loading.     

Synergistic effect of hybrid graphene and boron nitride on the cure kinetics and thermal conductivity of epoxy adhesives

In the present study, the synergistic effect of hybrid boron nitride (BN) with graphene on the thermal conductivity of epoxy adhesives has been reported. Graphene was prepared by chemical reduction of graphite oxide (GO) in a mixture of concentrated H₂SO₄/H₃PO₄ acid. The particle size distribution of GO was found to be ~10 μm and a low contact angle of 54° with water indicated a hydrophilic surface. The structure of prepared graphene was characterized by Fourier transform infrared (FTIR), X‐ray diffraction (XRD), Raman spectroscopy and atomic force microscopy (AFM). The thermal conductivity of adhesives was measured using guarded hot plate technique. Test results indicated an improvement in the thermal conductivity up to 1.65 W/mK, which was about ninefold increase over pristine epoxy. Mechanical properties of different epoxy formulations were also measured employing lap shear test. The surface characterization of different epoxy adhesive systems was characterized through XRD, scanning electron microscopy (SEM) and transmission electron microscopy (TEM) studies. Fourier transform infrared also served to determine the nature of interactions between filler particles and epoxy resin. Non‐isothermal differential scanning calorimetric (DSC) technique was used to investigate the effects of graphene and BN particles on the cure kinetics and cross‐linking reaction of epoxy cured with amine curing agent. The Kissinger equation, the model‐free isoconversional Flynn–Wall–Ozawa method and the Ozawa model were used to analyze the kinetic parameter. Copyright © 2017 John Wiley & Sons, Ltd.     

氮化硼载体对 Ru-Ba/BN 氨合成催化剂性能的影响

 研究了不同方法合成的氮化硼 (BN) 的性质及其负载的 Ru-Ba 催化剂对氨合成的催化性能. 采用 X 射线粉末衍射、N2 吸附-脱附、扫描电镜和傅里叶变换红外光谱等手段对所合成的 BN 样品进行了表征. 结果表明, 采用程序升温氮化和程序升温还原法均能在低于 900 oC 的条件下合成出较纯的六方相 BN, 其比表面积分别达到 103 和 138 m2/g. 其中前者负载 Ru-Ba 的催化剂活性更高, 在 475 oC, 10 MPa 和 10 000 h–1 的条件下出口氨浓度达 7.3%, 且在 550 oC 热处理 30 h 后, 活性基本保持不变.     

Influence of Neighboring Layers on Interfacial Energy of Adjacent Layers

The binding energy and generalized stacking-fault energy (GSFE) are two critical interface properties of two dimensional layered materials, and it is still unclear how neighboring layers affect the interface energy of adjacent layers. Here, we investigate the effect of neighboring layers by comparing the differences of binding energy and GSFE between trilayer heterostructures (graphene/graphene/graphene, graphene/graphene/boron nitride, boron nitride/graphene/boron nitride) and bilayer heterostructures (graphene/graphene, graphene/boron nitride) using density functional theory. The binding energy of the adjacent layers changes from -2.3% to 22.55% due to the effect of neighboring layer, with a very small change of the interlayer distance. Neighboring layers also make a change from -2% to 10% change the GSFE, depending on the property of the interface between adjacent layers. In addition, a new simple expression is proven to describe the GSFE landscape of graphene-like structure with high accuracy.     

Seamless Rim‐Functionalization of h‐BN with Silica—Experiment and Theoretical Modeling

Boron nitride contains six‐ring layers, which are isostructural to graphene, and it exhibits similar extraordinary mechanical strength. Unlike graphene, hexagonal boron nitride (h‐BN) is an insulator and has some polar features that make it a perfect material for those applications graphene is not suitable for, for example, purely ionic conductors, insulating membranes, transparent coatings, composite ceramics, high oxidation resistance materials. We report here a selective rim‐functionalization of h‐BN with SiO₂ by using the Stöber process. A closed, protruding ring of SiO₂ is formed covering all edges perpendicular to the [001] zones of the h‐BN stacks and thus shield the most reactive centers of BN layers. SEM and HAADF‐STEM images, X‐ray spectroscopy, and atomic force microscopy confirm the rim‐functionalization by SiO₂. XRD demonstrates the absence of any intercalation phenomenon of BN and reveals the glassy nature of the SiO₂ rims. Selected variations of synthesis and theoretical modeling both confirm that rim activation by water prior to the Stöber condensation is crucial. First‐principles calculations also confirm that dangling bonds of clean BN edges merge to give interlayer bonds that make further functionalization much more difficult. The reported reaction pathway should allow for other new functionalizations of pure BN and of the rimmed SiO₂/h‐BN composites.     

氮化硼薄膜内应力的红外光谱研究

用射频(RF)磁控溅射制备了立方氮化硼(c-BN)薄膜。FTIR光谱和电子衍射实验表明:该薄膜是纯的,其结晶度很高。FTIR光谱研究指出,基板负偏压是c-BN相形成的重要因素,但也由此产生了c-BN薄膜的应力,且负偏压越高,产生的应力越大。比较透射谱和反射谱的结果,c-BN薄膜表面层的应力小于内部的。按照c-BN形成的压力模型,表面应力小到一定程度可能影响c-BN的继续生长。一个特制的分层结构BN薄膜保留了由于应力造成的c-BN的裂纹,这个裂纹分布在一些同心圆上,中心是缺陷或杂质,同心圆之间有明显的分界线,把c-BN表层分割成许多应力区。     

镁热还原法制备圆片状氮化硼多晶微粉

采用三氧化二硼(B₂O₃)、氯化铵(NH₄Cl)和镁粉为反应物, 以三氧化二铁(Fe₂O₃)为催化剂, 利用镁热还原法在700～850 ℃下反应, 制备了氮化硼多晶微粉. X射线衍射(XRD)分析表明, 产物为六方相, 晶格常数a=0.2499 nm, c=0.6682 nm. 产物的红外光谱中在790和1380 cm^-1处出现了六方氮化硼的特征吸收峰. 利用扫描电子显微镜(SEM)观察到产物为圆片状颗粒, 平均直径约为0.9 μm, 平均厚度约为100 nm. 讨论了Fe2O3的存在对产物形成的影响.     

Raman spectroscopy of C-, BN-, SiC-layers deposited on multifilament substrates

The analytic characterisation of various layers and layer systems on fibrous materials are presented. The layers, deposited by an isothermal CVD process, consisting mainly of pyrolytic carbon, hexagonal boron nitride and silicon carbide were characterised by different analytical methods, especially by Raman spectroscopy [1]. The surface enhanced Raman spectroscopy (SERS) was used first time for the investigation of boron nitride (BN) coatings on fibres.     

Functionalization of Graphene Sheets via Chemically Grafting of PMMA Chains Through in-situ Polymerization

In this work, we report the preparation of graphene nanoplatelet which covalently functionalized with PMMA chains by introduction of vinyl groups onto graphene surface through simple esterification reaction between hydroxyl groups of graphite oxide and methacrylic anhydride. The synthesis is followed by in-situ polymerization with MMA monomers. The structural properties were characterized with X-ray diffraction spectroscopy (XRD) and scanning electronic microscopy (SEM) that showed the crystalline graphite is converted to individual layers during the synthesis steps. The grafting of PMMA chains was monitored with IR spectroscopy (FT-IR) and thermogravimetric analysis (TGA). The TGA results revealed 40% wt of PMMA chains chemically grafted onto graphene surface. Significant increase in glass transition temperature (T_g) and existence of polymer chains in two positions (physically absorbed and chemically grafting onto graphite surface) are indicated by differential scanning calorimetric (DSC) analysis.     

Nanocrystalline‐Graphene‐Tailored Hexagonal Boron Nitride Thin Films

Unintentionally formed nanocrystalline graphene (nc‐G) can act as a useful seed for the large‐area synthesis of a hexagonal boron nitride (h‐BN) thin film with an atomically flat surface that is comparable to that of exfoliated single‐crystal h‐BN. A wafer‐scale dielectric h‐BN thin film was successfully synthesized on a bare sapphire substrate by assistance of nc‐G, which prevented structural deformations in a chemical vapor deposition process. The growth mechanism of this nc‐G‐tailored h‐BN thin film was systematically analyzed. This approach provides a novel method for preparing high‐quality two‐dimensional materials on a large surface.     

Effects of Temperature Raising Speed on the Growth of BN Crystals in Hydrothermal Solutions

Cubic boron nitride (cBN) and orthorhombic boron nitride (oBN) crystals have been prepared in hydrothermal solutions by reacting H3BO3 NaN3 P and H3BO3 NaN3 N2H4 respectively. The experimental results indicated that, if the temperature was increased rapidly, both the yield and perfectness of BN crystals became poor. On the contrast, the yield and perfectness of BN crystals can be improved very much by slowly increasing the temperature of the reaction mixture. The results of X-ray powder diffraction (XRD), Fourier transform infrared spectrum (FTIR) and high resolution transmission electron microscopy (HRTEM) proved that the samples were composed of oBN and cBN.     

Poly(dopamine) assisted epoxy functionalization of hexagonal boron nitride for enhancement of epoxy resin anticorrosion performance

Hexagonal boron nitride (h‐BN) is modified by a simple and green method based on self‐oxidation of dopamine and epoxy groups functionalized silane (KH560) grafting. The surface modification and microstructure of h‐BN are characterized by Fourier transform infrared spectroscopy, X‐ray diffraction, X‐ray photoelectron spectroscopy, scanning electron microscopy and transmission electron microscopy. The poly(dopamine) and epoxy groups not only increase the compatibility of the h‐BN and enhance its interaction with epoxy matrix but also exhibit a remarkable superiority in enhancing the anticorrosion performance of epoxy coatings. In addition, the anticorrosion mechanisms of h‐BN@PDA‐KH560 are tentatively discussed. Copyright © 2016 John Wiley & Sons, Ltd.     

Highly Dispersible and Stable Anionic Boron Cluster–Graphene Oxide Nanohybrids

An efficient process to produce boron cluster–graphene oxide nanohybrids that are highly dispersible in water and organic solvents is established for the first time. Dispersions of these nanohybrid materials in water were extraordinarily stable after one month. Characterization of hybrids after grafting of appropriate cobaltabisdicarbollide and closo‐dodecaborate derivatives onto the surface of graphene oxide (GO) was done by FT‐IR, XPS, and UV/Vis. Thermogravimetric analysis (TGA) clearly shows a higher thermal stability for the modified‐GO nanohybrids compared to the parent GO. Of particular note, elemental mapping by energy‐filtered transmission electron microscopy (EFTEM) reveals that a uniform decoration of the graphene oxide surface with the boron clusters is achieved under the reported conditions. Therefore, the resulting nanohybrid systems show exceptional physico‐chemical and thermal properties, paving the way for an enhanced processability and further expanding the range of application for graphene‐based materials.     

Reactivity of Graphene and Hexagonal Boron Nitride In‐Plane Heterostructures with Oxygen: A DFT Study

A density‐functional study has been undertaken to investigate the chemical properties of in‐plane heterostructures of graphene and hexagonal boron nitride. The interactions of armchair and zigzag linking edges with oxygen are looked at in detail. The results of the calculations indicate that the linking edges are highly reactive to oxygen atoms and predict that oxygen molecules can accordingly be adsorbed dissociatively. Furthermore, because oxygen atoms cooperatively interact with the heterostructures, the process can lead to opening of the linking edges, thus splitting the two materials.     

Enhancement of the thermal and mechanical properties of a surface‐modified boron nitride–polyurethane composite

Thermoplastic polyurethane (PU) elastomer, prepared from poly(tetramethylene glycol) and methyl diphenyl diisocyanate, was blended with boron nitride (BN) to fabricate a thermally conductive interface material. BN treated by a silane coupling agent (BN―NH₂) and PU‐grafted BN were prepared to fabricate a composite that has better thermal conductivity and mechanical strength. The surface‐modified filler showed enhanced dispersibility and affinity because of the surface treatment with functional groups that affected the surface free energy, along with the structural similarity of the doped crystallized diisocyanate molecule with the matrix. The thermal conductivity increased from 0.349 to 0.467 W mk^?1 on 20 wt% PU‐grafted BN loading that is a 1.34‐fold higher value than in the case of pristine BN loading at the same weight fraction. Moreover, the number of BN particles acting as defects, thereby reducing the mechanical strength, is decreased because of strong adhesion. We can conclude that these composite materials may be promising materials for a significant performance improvement in terms of both the thermal and mechanical properties of PU‐based polymers. Copyright © 2014 John Wiley & Sons, Ltd.     

Cleaning of pyrolytic hexagonal boron nitride surfaces

Hexagonal boron nitride (h‐BN) has recently garnered significant interest as a substrate and dielectric for two‐dimensional materials and devices based on graphene or transition metal dichalcogenides such as molybdenum disulfide (MoS₂). As substrate surface impurities and defects can negatively impact the structure and properties of two‐dimensional materials, h‐BN surface preparation and cleaning are a critical consideration. In this regard, we have utilized X‐ray photoelectron spectroscopy to investigate the influence of several ex situ wet chemical and in situ thermal desorption cleaning procedures on pyrolytic h‐BN surfaces. Of the various wet chemistries investigated, a 10 : 1 buffered HF solution was found to produce surfaces with the lowest amount of oxygen and carbon contamination. Ultraviolet/ozone oxidation was found to be the most effective ex situ treatment for reducing carbon contamination. Annealing at 1050 °C in vacuum or 10^?5 Torr NH₃ was found to further reduce oxygen and carbon contamination to the XPS detection limits. Copyright © 2015 John Wiley & Sons, Ltd.     

Construction of a Nanoporous Highly Crystalline Hexagonal Boron Nitride from an Amorphous Precursor for Catalytic Dehydrogenation

Hexagonal boron nitride (h‐BN) is regarded as a graphene analogue and exhibits important characteristics and vast application potentials. However, discovering a facile method for the preparation of nanoporous crystalline h‐BN nanosheets (h‐BNNS) is still a challenge. Herein, a novel and simple route for the conversion of amorphous h‐BN precursors into highly crystalline h‐BNNS was achieved through a successive dissolution–precipitation/crystallization process in the presence of magnesium. The h‐BNNS has high crystallinity, high porosity with a surface area of 347 m² g^?1, high purity, and enhanced thermal stability. Improved catalytic performance of crystalline h‐BNNS was evidenced by its much higher catalytic efficiency in the dehydrogenation of dodecahydro‐N‐ethylcarbazole, compared with its amorphous h‐BN precursor, as well as other precious‐metal‐loaded heterogeneous catalysts.