Thermoresponsive shuttling of rotaxane containing trichloroacetate ion

A thermoresponsive rotaxane shuttling system was developed with a trichloroacetate counteranion of an ammonium/crown ether-type rotaxane. Chemoselective thermal decomposition of the ammonium trichloroacetate moiety on the rotaxane yielded the corresponding nonionic rotaxane accompanied by a positional change of the crown ether on the axle. The rotaxane skeleton facilitated effective dissociation of the acid, markedly lowering the thermal decomposition temperature.     

Efficient Synthesis of Cyclic Block Copolymers by Rotaxane Protocol by Linear/Cyclic Topology Transformation

High‐yielding synthesis of cyclic block copolymer (CBC) using the rotaxane protocol by linear‐cyclic polymer topology transformation was first demonstrated. Initial complexation of OH‐terminated sec‐ammonium salt and a crown ether was followed by the successive living ring‐opening polymerizations of two lactones to a linear block copolymer having a rotaxane structure by the final capping of the propagation end. CBC was obtained in a high yield by an exploitation of the mechanical linkage through the translational movement of the rotaxane component to transform polymer structure from linear to cyclic. Furthermore, the change of the polymer topology was translated into a macroscopic change in crystallinity of the block copolymer.     

Quantitative active transport in [2]rotaxane using a one-shot acylation reaction toward the linear molecular motor

A rotaxane consisting of a crown ether wheel and a secondary ammonium salt axle, on which a neopentyl-type end-cap was placed close to the ammonium moiety, was prepared. When the rotaxane was treated by excess triethylamine, the wheel component thermodynamically moved over the proximate neopentyl group to deconstruct the interlocked structure. The wheel component in the rotaxane, however, quantitatively moved against the proximate end-cap by the action of trifluoroacetic anhydride in the presence of excess triethylamine. This motion, which was driven by the simple one-shot acylation reaction, can be referred as the active transport. When the distant end-cap is of the neopentyl-type, the axle can be thermally dethreaded from the distant end-cap after the acylative transport. The series of the wheel movement controlled by the neopentyl group can be the basic motion of the unidirectional linear molecular motor.     

Co-Assembly of Chiral Amines and a Four-Armed Cyano-Substituted Luminophore through Hydrogen Bonds for Potential Development of Smart Chiroptical Materials

Chirality transfer from chiral molecules to assemblies is of vital importance to the design of functional chiral materials. In this work, selective co-assembly behaviors between chiral molecules and an achiral luminophore, potentially driven by the intermolecular salt-bridge type hydrogen bonds are reported. Cyano-substituted tetrakis(arylthio)benzene carboxylic acid ( TA ) served as the luminophore and hydrogen bond donors, which underwent co-assembly with different chiral amines. It was found that structures of chiral amines affect the chirality transfer and the properties of co-assemblies due to effects on hydrogen bonds and stacking pattern. Only in specific co-assemblies, the chiroptical properties occurred at both ground state and excited states based on the emerged Cotton effects and circularly polarized luminescence (CPL) signals, revealing that the chirality was successfully transferred from molecular level to supramolecular level. In addition, accurate quantitative examination of chiral amines was realized by circular dichroism (CD) spectra. This work demonstrates the characteristic chirality response and transfer through co-assembly, providing a potential method to develop smart chiroptical materials.     

The origin of the bistability in the thiazyl radical 1,3,5-trithia-2,4,6-triazapentalenyl (TTTA): A first principles bottom-up investigation of the magnetic properties of its high temperature polymorph

A first principles bottom-up study is performed on the high temperature polymorph of the thiazyl radical 1,3,5-trithia-2,4,6-triazapentalenyl, TTTA, a purely organic molecule-based magnet that shows thermal bistability, with the aim of getting a quantitative understanding at the molecular level the mechanism of thermal bistability and the factors that control the existence of a hysteresis loop. Experimental studies on crystals of TTTA have shown that it is a thermally bistable material that exhibits a broad hysteresis loop encompassing room temperature (the high temperature phase is paramagnetic, while the low temperature phase is magnetically silent). Both structures present 1D π-stacks and the changes in the magnetic properties up to now have been solely attributed to changes within these stacks, which in the high temperature phase are composed of evenly-spaced radicals and in the low temperature phase the radicals are separated by alternately long and short spacings. Our study shows that the magnetic topology of the high temperature polymorph is clearly 3D with important interactions between the stacks, however a 1D magnetic model gives a qualitative reproduction of the macroscopic magnetic properties. This suggests that a proper investigation into the origin of the bistability of this material requires consideration of the inter-stack interactions as well as looking at the difference in packing within the stacks.     

Melting of nascent and thermally treated super-high molecular weight polyethylene

The melting of nascent and thermally treated super-high molecular weight polyethylene (SHMWPE) is investigated by means of differential scanning calorimetry (DSC). Higher melting temperatures and enthalpies of the nascent and annealed samples are observed. The melting temperatures and enthalpies of melt crystallized SHMWPE is lower and depends on the temperature of thermal treatment. All melting properties are explained by presuming that the lamellar structure contains a high concentration of entangled tie macromolecules in amorphous regions formed during polymerization. It was supposed that the concentration of the entanglements and the stressed tie molecules are changed with the temperature of the thermal pretreatment.     

Thermally Induced Intra‐Carboxyl Proton Shuttle in a Molecular Rack‐and‐Pinion Cascade Achieving Macroscopic Crystal Deformation

Proton transport via dynamic molecules is ubiquitous in chemistry and biology. However, its use as a switching mechanism for properties in functional molecular assemblies is far less common. In this study, we demonstrate how an intra‐carboxyl proton shuttle can be generated in a molecular assembly akin to a rack‐and‐pinion cascade via a thermally induced single‐crystal‐to‐single‐crystal phase transition. In a triply interpenetrated supramolecular organic framework (SOF), a 4,4′‐azopyridine (azpy) molecule connects to two biphenyl‐3,3′,5,5′‐tetracarboxylic acid (H₄BPTC) molecules to form a functional molecular system with switchable mechanical properties. A temperature change reversibly triggers a molecular movement akin to a rack‐and‐pinion cascade, which mainly involves 1) an intra‐carboxyl proton shuttle coupled with tilting of the azo molecules and azo pedal motion and 2) H₄BPTC translation. Moreover, both the molecular motions are collective, and being propagated across the entire framework, leading to a macroscopic crystal expansion and contraction.     

Synthesis and characterization of a persistent paramagnetic rotaxane based on alpha-cyclodextrin

The synthesis and spectroscopic properties of a novel paramagnetic [2]rotaxane is described. This rotaxane is made from molecules having an alkyl chain flanked by 2,2,6,6-tetramethylpiperidine-N-oxyl (TEMPO) groups. Complexation of sebacoyl chloride by alpha-cyclodextrin followed by reaction with a bulky aminonitroxide resulted in the trapping of the cyclodextrin, threaded by the alkyl chain, thus generating the rotaxane structure. The structure of the paramagnetic [2]rotaxane was fully characterized by ESI-MS, 1D and 2D NMR and ESR spectroscopy.     

Cyclodextrin-Based [c2]Daisy Chain Rotaxane Insulating Two Diarylacetylene Cores

A [c2]daisy chain rotaxane with two diarylacetylene cores was efficiently synthesized in 53 % yield by capping a C₂-symmetric pseudo[2]rotaxane composed of two diarylacetylene-substituted permethylated α-cyclodextrins (PM α-CDs) with aniline stoppers. The maximum absorption wavelength of the [c2]daisy chain rotaxane remained almost unchanged in various solvents, unlike that of the stoppered monomer, indicating that the two independent diarylacetylene cores were insulated from the external environment by the PM α-CDs. Furthermore, the [c2]daisy chain rotaxane exhibited fluorescence emission derived from both diarylacetylene monomers and the excimer, which implies that the [c2]daisy chain structure can undergo contraction and extension. This is the first demonstration of a system in which excimer formation between two π-conjugated molecules within an isolated space can be controlled by the unique motion of a [c2]daisy chain rotaxane.     

Porphyrin-functionalised rotaxanes for anion recognition

The synthesis and anion-recognition properties of two new porphyrin-functionalised [2]rotaxane host molecules are described. The rotaxane compounds are prepared via a chloride-anion-templated clipping strategy. (1)H NMR titration experiments demonstrate that the rotaxane host systems exhibit high binding affinities and general selectivities for chloride anions in DMSO-d(6) or CDCl(3)/CD(3)OD solvent systems. UV-visible and fluorescence spectroscopy experiments reveal that the rotaxane receptors are ineffective as optical anion sensors. However, both receptors are shown to be capable of detecting chloride anions electrochemically via cathodic shifts in the porphyrin P/P(+) redox couples.     

Near‐Infrared Croconaine Rotaxanes and Doped Nanoparticles for Enhanced Aqueous Photothermal Heating

The photothermal effect is the generation of heat by molecules or particles upon high‐energy laser irradiation, and near‐infrared absorbers such as gold nanoparticles and organic dyes have a range of potential photothermal applications. The favourable photothermal properties of thiophene‐functionalised croconaine dyes were recently discovered. The synthesis and properties of novel croconaine rotaxane and pseudorotaxane architectures capable of efficient photothermal performance in both organic and aqueous environments are reported. The versatility of this dye‐encapsulation strategy was demonstrated by the preparation of two organic croconaine rotaxanes using different synthetic methods: the formation of an aqueous pseudorotaxane association complex, and the synthesis of water‐soluble, croconaine‐doped silicated micelle nanoparticles. All of these near‐infrared‐absorbing systems exhibit excellent photothermal behaviour, with pseudorotaxane and rotaxane formation vital for effective aqueous heat generation. Dye encapsulation provides steric protection to enhance the stability of a water‐sensitive croconaine dye, while rotaxane‐doped nanoparticles avoid detrimental band broadening caused by chromophore coupling.     

Thermotropic rigid chain copolymers I. crystallization kinetics and thermodynamic properties

The kinetics of structure formation and the thermal properties of the ordered phase were analyzed calorimetrically for a rigid polymer, characterized by an irregular chemical structure. The transition from the nematic melt to a partially ordered state was found to involve two different processes, a fast and a slow one. The fast one corresponds apparently to a thermally activated nucleation and growth mechanism, whereas the slow one is strongly self delaying. Its transition rate is only weakly dependent on the temperature. The thermal properties of the ordered phase, resulting from this process, vary strongly with the annealing temperature and annealing time. The enthalpy and entropy of fusion, characteristic for the pure ordered phase, are lower by a factor of about 10 in comparison to the corresponding values of flexible chain molecules.     

Rotaxane络合物研究新进展

Rotaxane是在带有长链的分子上套入环状化合物的特铁络合物。本文综述了rotaxane络合物,特别是环状化合物为环糊精( cyclodextrin, CD)的rotaxane-CD络合物的组成、合成,一些性质和应用以及研兄方法,并提出了应予重视的研完方面。     

Thermal stability of organoclays with mono- and di-alkyl cationic surfactants

In this study, mono- and di-alkyl cationic surfactants were used to prepare organoclays through ion exchange and the prepared organoclays were characterised by X-ray diffraction (XRD) and thermogravimetric analysis (TG). Larger basal spacings were observed in the interlayer of the organoclays intercalated with DDDMA than organoclays intercalated with DDTMA. The DTG curves identify the thermal stability of organoclays intercalated with two different types of surfactants (DDTMA and DDDMA) and the different arrangements of the surfactant molecules intercalated in the montmorillonite. Both organoclays intercalated with organic surfactant molecules proved to be thermally stable at high temperature. This study provides an understanding of the structure and properties of organoclays, which will enhance the potential applications of organoclays in environmental remediation.     

光驱动分子梭

分子梭在分子开关、分子逻辑门、信息存储等领域有着潜在的应用价值,是超分子化学领域的研究热点之一。本文综述了光驱动分子梭的研究进展：重点举例介绍了荧光光谱识别法和圆二色光谱识别法这两种识别光驱动分子梭位置状态的方法;阐述了构建光驱动轮烷分子梭的新型方法学,包括光驱动环糊精[2]轮烷和[1]轮烷分子梭的定向合成,举例介绍了光间接驱动的轮烷分子梭,以及光驱动[3]轮烷型分子梭和分子梭聚合物;举例说明了光驱动分子梭的功能性应用,用光驱动分子梭来模拟分子水平的逻辑门,研究光驱动分子梭体系中的能量传递机理,以及非溶液态的光驱动分子梭;并对分子梭今后的发展做了展望。     

A photoswitchable rotaxane with a folded molecular thread

Novel [2]rotaxanes containing the tetracationic cyclophane cyclobis(paraquat-4,4-biphenylene) and a dumbbell-shaped molecular thread incorporating a photoactive diarylcycloheptatriene station as well as a photoinactive anisol station have been synthesized with yields of nearly 50 % by the alkylative endcapping method. The rotaxane was transformed into the related rotaxane incorporating a diaryl tropylium unit by electrochemical oxidation. The precursor of the cycloheptatrienyl rotaxane, the related pseudorotaxane, and the rotaxanes incorporating the diarylcycloheptatriene and the corresponding tropylium unit were characterized by (1)HNMR spectroscopy and UV/Vis spectroscopy. According to the NMR spectra, both the cycloheptatriene and the tropylium rotaxane possess a folded conformation enabling the tetracationic cyclophane to interact with two stations. The diarylcycloheptatriene station is incorporated inside the cavity of the cyclophane and the anisol station resides alongside the bipyridinium unit of the cyclophane. In contrast, the anisol station is inside the cyclophane in the tropylium rotaxane. The exchange between both conformations can be achieved by introducing the methoxy leaving group into the cycloheptatriene ring; the tropylium rotaxane is generated by photoheterolysis of this methoxy-substituted rotaxane, which reacts thermally back to the cycloheptatriene rotaxane, thus closing the switching cycle. These induced conformational changes achieve a so-called molecular machine.     

A photochemically driven molecular-level abacus

A molecular-level abacus-like system driven by light inputs has been designed in the form of a [2]rotaxane, comprising the pi-electron-donating macrocyclic polyether bis-p-phenylene-34-crown-10 (BPP34C10) and a dumbbell-shaped component that contains 1) a Ru(II) polypyridine complex as one of its stoppers in the form of a photoactive unit, 2) a p-terphenyl-type ring system as a rigid spacer, 3) a 4,4'-bipyridinium unit and a 3,3'-dimethyl-4,4'-bipyridinium unit as pi-electron-accepting stations, and 4) a tetraarylmethane group as the second stopper. The synthesis of the [2]rotaxane was accomplished in four successive stages. First of all, the dumbbell-shaped component of the [2]rotaxane was constructed by using conventional synthetic methodology to make 1) the so-called "west-side" comprised of the Ru(II) polypyridine complex linked by a bismethylene spacer to the p-terphenyl-type ring system terminated by a benzylic bromomethyl function and 2) the so-called "east-side" comprised of the tetraarylmethane group, attached by a polyether linkage to the bipyridinium unit, itself joined in turn by a trismethylene spacer to an incipient 3,3'-dimethyl-4,4'-bipyridinium unit. Next, 3) the "west-side" and "east-side" were fused together by means of an alkylation to give the dumbbell-shaped compound, which was 4) finally subjected to a thermodynamically driven slippage reaction, with BPP34C10 as the ring, to afford the [2]rotaxane. The structure of this interlocked molecular compound was characterized by mass spectrometry and NMR spectroscopy, which also established, along with cyclic voltammetry, the co-conformational behavior of the molecular shuttle. The stable translational isomer is the one in which the BPP34C10 component encircles the 4,4'-bipyridinium unit, in keeping with the fact that this station is a better pi-electron acceptor than the other station. This observation raises the question- can the BPP34C10 macrocycle be made to shuttle between the two stations by a sequence of photoinduced electron transfer processes? In order to find an answer to this question, the electrochemical, photophysical, and photochemical (under continuous and pulsed excitation) properties of the [2]rotaxane, its dumbbell-shaped component, and some model compounds containing electro- and photoactive units have been investigated. In an attempt to obtain the photoinduced abacus-like movement of the BPP34C10 macrocycle between the two stations, two strategies have been employed-one was based fully on processes that involved only the rotaxane components (intramolecular mechanism), while the other one required the help of external reactants (sacrificial mechanism). Both mechanisms imply a sequence of four steps (destabilization of the stable translational isomer, macrocyclic ring displacement, electronic reset, and nuclear reset) that have to compete with energy-wasteful steps. The results have demonstrated that photochemically driven switching can be performed successfully by the sacrificial mechanism, whereas, in the case of the intramolecular mechanism, it would appear that the electronic reset of the system is faster than the ring displacement.     

Temperature‐Directed Micellar Morphological Transformation Using CABC‐Block Copolymers and Its Applications in Encapsulation and Hidden Segment

A temperature‐directed micellar morphological transformation was developed using CABC multi‐block copolymers with a hydrophobic block A, a hydrophilic block B, and a thermally responsive block C with a lower critical solution temperature (LCST). The micellar structure was switched from a star (below LCST) to a flower (above LCST). The transition temperature was tunable in a wide range (11–90 °C) by varying the C monomer composition. The large difference in the loading capacity between the star and flower enabled efficient encapsulation and controlled release of external molecules. Unlike conventional systems, the present star‐to‐flower transformation keeps micellar structures and hence does not liberate polymers but only external molecules selectively. Another application is a hidden functional segment. A functional segment is hidden (shielded) below the LCST and exposed to interact with external molecules or surfaces above the LCST.     

The Incorporation of Indigo Molecules in Sepiolite Tunnels

Evidence for access of molecules the size of acetone or pyridine to the intracrystalline tunnels of nanofibre clay (sepiolite) has indicated formation of a new type of organic–inorganic nanocomposites. However, the introduction of larger molecules has been a recurring problem. It is now agreed that for indigo, the molecules are located on the external surface and at the ends of the fibres, thus blocking access to internal tunnels. We claim, however, that it is possible for indigo molecules to access the internal channels of sepiolite. FTIR and XRD analyses have provided evidence for folding of the sepiolite structure preheated at high temperature (above 350 °C). By comparison, we have shown that for indigo/sepiolite mixtures treated in the same conditions, no change in the crystalline structure of the sepiolite is observed, and that blue samples, related to Maya blue, with indigo molecules incorporated deeply enough into sepiolite to prevent folding of the tunnels, can be obtained. NMR, FTIR and thermal analysis confirm the interaction of indigo with the water coordinated to magnesium(II) and located inside the internal and external channels of sepiolite. Two other hypotheses are excluded; we show both that zeolitic water is not blocked in the tunnels by indigo, and that if thermal decomposition products of indigo can be formed, they are in a minority.