Determination of organic additives in mortars by near-IR spectroscopy. A novel approach to designing a sample set with high-variability components

Industrial mortars consist primarily of a mixture of cement and an aggregate plus a small amount of additives that are used to modify specific properties. Using too high or too low additive rates usually results in the loss of desirable properties in the end product. This entails carefully controlling the amounts of additives added to mortar in order to ensure correct dosing and/or adequate homogeneity in the final mixture. Near-IR (NIR) spectroscopy has proved effective for this purpose as it requires no sample pretreatment and affords expeditious analyses. The purpose of this work was to determine two organic additives (viz. Ad1 and Ad2) in mortars by using partial least squares regression multivariate calibration models constructed from NIR spectroscopic data. The additives are used to expedite setting and increase cohesion between particles in the mortar. In order to ensure that the sample set contained natural variability in the samples, we used a methodology based on experimental design to construct a representative set of samples. This novel design is based on a hexagonal antiprism that encompasses the concentration ranges spanned by the analytes and the variability inherent in each additive. The D-optimality criterion was used to obtain various combinations between Ad1 and Ad2 additive classes. The partial least squares calibration models thus constructed for each additive provided accurate predictions: the intercept and the slope of the plots of predicted values versus reference values for each additive were close to 0 and 1, respectively, and their confidence ranges included the respective value. The ensuing analytical methods were validated by using an external sample set.     

A new approach to cyclic hydroxamic acids: Intramolecular cyclization of N-benzyloxy carbamates with carbon nucleophiles

N-Alkyl-N-benzyloxy carbamates, 2, undergo facile intramolecular cyclization with a variety of carbon nucleophiles to give functionalized five- and six-membered protected cyclic hydroxamic acids, 3, in good to excellent yields. This method can be extended to prepare seven-membered cyclic hydroxamic acids in moderate yields. The sulfone intermediates 3 from this study can be alkylated while the corresponding phosphonates have been shown to undergo HWE reaction. The α,β-unsaturated synthon, 8, prepared by thermal elimination of sulfoxide 3m, undergoes Michael addition with secondary amines. The usefulness of this approach to prepare polydentate chelators has been demonstrated by the synthesis of bis cyclic hydroxamic acids 12, 14, and 15.     

Chemistry of indoles carrying a basic function. Part 8: A new approach to the ergoline skeleton

Starting from N-pivaloyl-Uhle's ketone a new synthetic approach to the ergoline skeleton has been elaborated. Ring D of the tetracyclic skeleton was formed by an intramolecular Dieckmann-condensation of a diester, obtained in a Reformatsky reaction of a properly substituted derivative of N-pivaloyl Uhle's ketone followed by elimination of water.     

Direct analysis in real time mass spectrometry and multivariate data analysis: A novel approach to rapid identification of analytical markers for quality control of traditional Chinese medicine preparation

The paper presents a novel strategy to identify analytical markers of traditional Chinese medicine preparation (TCMP) rapidly via direct analysis in real time mass spectrometry (DART-MS). A commonly used TCMP, Danshen injection, was employed as a model. The optimal analysis conditions were achieved by measuring the contribution of various experimental parameters to the mass spectra. Salvianolic acids and saccharides were simultaneously determined within a single 1-min DART-MS run. Furthermore, spectra of Danshen injections supplied by five manufacturers were processed with principal component analysis (PCA). Obvious clustering was observed in the PCA score plot, and candidate markers were recognized from the contribution plots of PCA. The suitability of potential markers was then confirmed by contrasting with the results of traditional analysis methods. Using this strategy, fructose, glucose, sucrose, protocatechuic aldehyde and salvianolic acid A were rapidly identified as the markers of Danshen injections. The combination of DART-MS with PCA provides a reliable approach to the identification of analytical markers for quality control of TCMP.     

A "single-sample concept" (SSC): a new approach to the combinatorial chemistry of inorganic materials

Combinatorial estimations show that, within an unreacted ceramic sample prepared by mixing N different starting materials MxOy with average particle size approximately 1 microm, there are about 10(12) grains per cubic centimeter, sufficient for local reactions to occur that may produce a larger number of product oxides than presently accessible by 2D plate techniques. The "single-sample concept" (SSC) is proposed for performing property-directed syntheses for the preparation of ferri-/ferromagnetic or superconducting compounds. Because of the magnetic properties of the products, libraries of product grains can be sorted by means of magnetic separation techniques. For materials with a large magnetization, the separation efficiency is so high that traces of products can be isolated. The SSC concept was tested experimentally to prepare Fe-based oxides (N=17, 24, 30). The large yields (<75 wt %, N=17) of product grains agree with the literature data, which indicate that 3d metal magnetic oxide phases (Tc>300 K) are most probably Fe oxides. In combination with magnetic separation techniques, SSC seems particularly adapted for exploring the solid-state chemistry of metallic lead elements that form ferri-/ferromagnetic or superconducting oxide phases difficult to detect systematically within the large phase space of theoretically existing compounds.     

Two-step liquid phase microextraction combined with capillary electrophoresis: A new approach to simultaneous determination of basic and zwitterionic compounds

In this work, two-step hollow fiber-based liquid-phase microextraction procedure was evaluated for extraction of the zwitterionic cetirizine (CTZ) and basic hydroxyzine (HZ) in human plasma. In the first step of extraction, the pH of sample was adjusted at 5.0 in order to promote liquid-phase microextraction of the zwitterionic CTZ. In the second step, the pH of sample was increased up to 11.0 for extraction of basic HZ. In this procedure, the extraction times for the first and the second steps were 30 and 20 min, respectively. Owing to the high ratio between the volumes of donor phase and acceptor phase, CTZ and HZ were enriched by factors of 280 and 355, respectively. The linearity of the analytical method was investigated for both compounds in the range of 10-500 ng mL(-1) (R(2) > 0.999). Limit of quantification (S/N = 10) for CTZ and HZ was 10 ng mL(-1) , while the limit of detection was 3 ng mL(-1) for both compounds at a signal to noise ratio of 3:1. Intraday and interday relative standard deviations (RSDs, n = 6) were in the range of 6.5-16.2%. This procedure enabled CTZ and HZ to be analyzed simultaneously by capillary electrophoresis.     

A data-oriented approach to making new molecules as a student experiment: artificial intelligence-enabling FAIR publication of NMR data for organic esters

The lack of machine-readable data is a major obstacle in the application of nuclear magnetic resonance (NMR) in artificial intelligence (AI). As a way to overcome this, a procedure for capturing primary NMR spectroscopic instrumental data annotated with rich metadata and publication in a Findable, Accessible, Interoperable and Reusable (FAIR) data repository is described as part of an undergraduate student laboratory experiment in a chemistry department. This couples the techniques of chemical synthesis of a never before made organic ester with illustration of modern data management practices and serves to raise student awareness of how FAIR data might improve research quality and replicability. Searches of the registered metadata are shown, which enable actionable finding and accessing of such data. The potential for re-use of the data in AI applications is discussed.     

Postcolumn derivatization of amino acids using reaction flow chromatography columns with fluorescence detection: A fast new approach to selective derivatization techniques

Reaction flow (RF) chromatography with fluorescamine reagent and fluorescence detection (FLD) was used for the analysis of amino acids. The performance of RF chromatography was tested against several optimized conventional postcolumn derivatization (PCD) methods. RF columns achieved greater sensitivity compared to conventional PCD methods, without the need for reaction loops, which resulted in more efficient separations. The RF-PCD method also achieved limits of detection (LOD) from the low picomole to subnanomole range. The calibration data of the RF-PCD technique yielded R²?≥?0.99 and % relative standard deviation in peak areas ranging from 0.34% to 5%. Through reaction flow chromatography, multiplexed detection was also achieved allowing the monitoring and analysis of derivatized and nonderivatized flow streams simultaneously.     

Stabilities of mixed metal complexes with biologically active colchiceine in dioxan-water and their relation to quantitative softness values: A new approach

Summary Equilibria between colchiceine and protons or bivalent metal ions and mixed metal ions have been investigated potentiometrically. The method of Bjerrum and Calvin, as modified by Irving and Rossotti [1] has been used to find the values ofn andpL. Stability constants have been calculated using NBAR and weighted least-squares programmes. The values ofS _min=² have also been calculated. The order of stability constants for bivalent metal complexes was found to be: Zn < Cu > Ni > Co > Cd > Mn > Mg and for mixed metal complexes: Cu-Ni > Cu-Zn > Cu-Cd. A linear relationship was observed between logK ₁ and the softness values of the complexes.Part of this work was presented for to the DALTON 1992 Autumn Meeting of the Royal Society of Chemistry, Trinity College Dublin, Sept 1618, 1992     

A CoMFA analysis with conformational propensity: An attempt to analyze the SAR of a set of molecules with different conformational flexibility using a 3D-QSAR method

CoMFA analysis, a widely used 3D-QSAR method, has limitations to handle a set of SAR data containing diverse conformational flexibility since it does not explicitly include the conformational entropic effects into the analysis. Here, we present an attempt to incorporate the conformational entropy effects of a molecule into a 3D-QSAR analysis. Our attempt is based on the assumption that the conformational entropic loss of a ligand upon making a ligand-receptor complex is small if the ligand in an unbound state has a conformational propensity to adopt an active conformation in a complex state. For a QSAR analysis, this assumption was interpreted as follows: a potent ligand should have a higher conformational propensity to adopt an `active-conformation'-like structure in an unbound state than an inactive one. The conformational propensity value was defined as the populational ratio, N<sub>active</sub>/N<sub>stable</sub>, of the number of energetically stable conformers, N<sub>stable</sub>, to the number of `active-conformation'-like structures, N_active. The latter number was calculated by counting the number of conformers that satisfied the structural parameters deduced from the active conformation. A set of SAR data of imidazoleglycerol phosphate dehydratase inhibitors containing 20 molecules with different conformational flexibility was used as a training set for developing a 3D structure-activity relationship by a CoMFA analysis with the conformational propensity value. This resulted in a cross-validated squared correlation coefficient of the CoMFA model with the conformational propensity value (R ² _cross = 0.640) higher than that of the standard CoMFA model (R ² _cross = 0.431). Then we evaluated the quality of the CoMFA models by predicting the inhibitory activity for a new molecule.     

A tandem MS precursor-ion scan approach to identify variable covalent modification of albumin Cys34: a new tool for studying vascular carbonylation

We developed a liquid chromatography electrospray ionisation multi-stage mass spectrometry (LC-ESI-MS/MS) approach based on precursor-ion scanning and evaluated it to characterize the covalent modifications of Cys34 human serum albumin (HSA) caused by oxidative stress and reactive carbonyl species (RCS) adduction. HSA was isolated and digested enzymatically to generate a suitable-length peptide (LQQCPF) containing the modified tag residue. The resulting LQQCPF peptides were identified by LC-ESI-MS/MS in precursor-ion scan mode and further characterized in product-ion scan mode. The product ions for precursor-ion scanning were selected by studying the MS/MS fragmentation of a series of LQQCPF derivatives containing Cys34 modified with different alpha,beta-unsaturated aldehydes and di and ketoaldehydes. We used a Boolean logic to enhance the specificity of the method: this reconstitutes a virtual current trace (vCT) showing the peaks in the three precursor-ion scans, marked by the same parent ion. The method was first evaluated to identify and characterize the Cys34 covalent adducts of HSA incubated with 4-hydroxy-hexenal, 4-hydroxy-trans-2-nonenal (HNE) and acrolein (ACR). Then we studied the Cys34 modification of human plasma incubated with mildly oxidized low-density lipoproteins (LDL), and the method easily identified the LQQCPF adducts with HNE and ACR. In other experiments, plasma was oxidized by 2,2'-azobis(2-amidinopropane) HCl (AAPH) or by Fe2+/H2O2. In both conditions, the sulfinic derivative of LQQCPF was identified and characterized, indicating that the method is suitable not only for studying RCS-modified albumin, but also to check the oxidative state of Cys34 as a marker of oxidative damage.     

Homopolycyclotrimerization of A4‐type tetrayne: A new approach for the creation of a soluble hyperbranched poly(tetraphenylethene) with multifunctionalities

A tetraphenylethene‐containing A₄‐type tetrayne, named 1,1,2,2‐tetrakis(4‐ethynylphenyl)ethene is synthesized and its TaCl₅‐Ph₄Sn catalyzed homopolycyclotrimerization affords hyperbranched poly(tetraphenylethene) with high molecular weight (M_w = 280,000) in high yield (97%). The polymer shows good solubility and high thermal stability. It is aggregation‐enhanced emission (AEE)‐active and functions as a fluorescent chemosensor for explosive detection with a superamplification effect and large quenching constants up to 758,000 M^?1. The polymer shows high and tunable refractive indices (RI = 1.9288?1.6746) in a wide wavelength region. Porous fluorescent polymer thin film is prepared by breath figure (BF) methods and real‐time monitoring of the elusive BF formation process is realized. Photolithography of the thin films readily generates well‐resolved fluorescent photopattern without and with porous secondary structure. The polymer is metallified and pyrolysed to give magnetic ceramics with high magnetic susceptibilities (M_s = 83 emu/g) and near‐zero coercivity (H_c = 0.08 kOe). © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 4752–4764     

A practical entry to C18-constrained-E-ring analogues of methyllycaconitine (MLA): a concise new stereoselective approach to 8-oxa-decahydroisoquinolines accompanied by a simple microwaves-assisted synthesis of the succinimidobenzoate appendage of MLA

A Mannich-type intramolecular cyclization afforded access to a 8-oxa-decahydroisoquinoline heterocyclic system. Good stereoselectivity was observed. A promising microwave-assisted synthesis of the methylsuccinimidobenzoate moiety of methyllycaconitine has also been carried out.     

A simple liquid chromatography coupled with tandem mass spectrometry approach for the simultaneous quantification of thirteen compounds in rats following oral administration of raw and processed Fructus Xanthii: Application in a comparative pharmacokinetic study

A simple and sensitive analysis using ultra high performance liquid chromatography with a tandem mass spectrometric system operated in selected reaction monitoring mode was developed for the determination of 11 phenolic acids, atractyloside, and carboxyatractyloside in rat plasma. The two classes of analytes were then separated on a Waters ACQUITY? UPLC HSS T3 column (50 mm × 2.1 mm, 1.8 µm) using gradient elution with a mobile phase of 0.2% formic acid in water containing 10 mM ammonium acetate and methanol. Detection was accomplished by selected reaction monitoring scanning via an electrospray source operating in negative ionization mode. The calibration curve was linear (R² = 0.990) over a concentration range of 1.20–3500 ng/mL, while the validated lower limit of quantification was 1.20 ng/mL. The precision varied from 0.84 to 4.62%, and the accuracy varied within ±5%. The method proved robust with sample freezing and thawing and with short‐ and long‐term sample storage. The established method was used for simultaneous quantification and was successfully used for the first time for the pharmacokinetic evaluation of 13 compounds after the intragastric administration of raw and processed Fructus Xanthii in rats. The results indicated that processing affects the absorption and metabolism of Fructus Xanthii extract. Importantly, the results also indicated the importance of processing for the clinical application of traditional Chinese medicine.     

Quantitation of a PEGylated protein in monkey serum by UHPLC-HRMS using a surrogate disulfide-containing peptide: A new approach to bioanalysis and in vivo stability evaluation of disulfide-rich protein therapeutics

To quantify a therapeutic PEGylated protein in monkey serum as well as to monitor its potential in vivo instability and methionine oxidation, a novel ultra high performance liquid chromatography-high resolution mass spectrometric (UHPLC-HRMS) assay was developed using a surrogate disulfide-containing peptide, DCP(SS), and a confirmatory peptide, CP, a disulfide-free peptide. DCP(SS) was obtained by eliminating the step of reduction/alkylation before trypsin digestion. It contains an intact disulfide linkage between two peptide sequences that are essential for drug function but susceptible to potential in vivo cleavages. HRMS-based single ion monitoring (SIM) on a Q Exactive™ mass spectrometer was employed to improve assay specificity and sensitivity for DCP(SS) due to its poor fragmentation and low sensitivity with SRM detection. The assay has been validated for the protein drug in monkey serum using both surrogate peptides with excellent accuracy (within ±4.4%Dev) and precision (within 7.5%CV) with a lower limit of quantitation (LLOQ) at 10 ng mL⁻¹. The protein concentrations in monkey serum obtained from the DCP(SS)-based assay not only provided important pharmacokinetic parameters, but also confirmed in vivo stability of the peptide regions of interest by comparing drug concentrations with those obtained from the CP-based assay or from a ligand-binding assay (LBA). Furthermore, UHPLC-HRMS allowed simultaneous monitoring of the oxidized forms of both surrogate peptides to evaluate potential ex vivo/in vivo oxidation of one methionine present in each of both surrogate peptides. To the best of our knowledge, this is the first report of using a surrogate disulfide-containing peptide for LC-MS bioanalysis of a therapeutic protein.     

Solubilization of cytochrome c in organic media with fluoroalkyl end-capped N-(1,1-dimethyl-3-oxobutyl)acrylamide oligomer: a new approach to fluorinated biocatalyst in organic media

Self-assembled molecular aggregates of fluoroalkyl end-capped N-(1,1-dimethyl-3-oxobutyl)acrylamide oligomer can solubilize cytochrome c in organic media such as methanol, although the corresponding non-fluorinated polymer cannot solubilize cytochrome c in organic media. Interestingly, the resulting fluorinated oligomer-cytochrome c aggregate was found to act effectively as a new fluorinated biocatalyst for the oxidation of pinacyanol chloride with hydrogen peroxide in the non-aqueous methanol.     

A new approach to the C28 fatty acid chain of the marine natural products schulzeines B and C: a concise diastereoselective total synthesis of(−)-schulzeine B

An enantioselective approach to the C₂₈ fatty acid chain of the marine natural products schulzeines B and C was established based on the l-tartaric acid derived C₄ chiron 11 via successive 1,4-bis-chain elongation reactions and catalytic asymmetric hydrogenation. The chiral tricyclic core 8 was constructed via a diastereoselective Pictet-Spengler cyclization reaction (dr = 89:11) of the l-glutamic acid derived precursor 13. On this basis, a concise total synthesis of (−)-schulzeine B (5) was disclosed.     

The reaction of tetralones with nitriles: a simple approach to the synthesis of new substituted benzo[h]quinazolines, benzo[f]quinazolines and dibenzo[a,i]phenanthridines

The one-pot reaction of 1-tetralone with nitriles in the presence of triflic anhydride affords in good yields 2,4-disubstituted 5,6-dihydrobenzo[h]quinazolines, which oxidation with DDQ leads to the corresponding benzo[h]quinazolines. 2-Tetralone undergoes identical process forming 1,3-disubstituted 5,6-dihydrobenzo[f]quinazolines. However, when the reaction of 2-tetralone is carried out with methylthiocyanate as nitrile, 5-methylthiotetrahydrodibenzo[a,i]phenanthridines are isolated in good yields. Easy transformations of the methylthio group offer possible access to a variety of substituted dibenzo[a,i]phenanthridines.