Tunable Gold-catalyzed Reactions of Propargyl Alcohols and Aryl Nucleophiles

Gold-catalyzed transformations of 1,3-diarylpropargyl alcohols and various aryl nucleophiles were studied. Selective tunable synthetic methods were developed for 1,1,3-triarylallenes, diaryl-indenes and tetraaryl-allyl target products by C3 nucleophilic substitution and subsequent intra- or intermolecular hydroarylation, respectively. The reactions were scoped with regards to gold(I)/(III) catalysts, solvent, temperature, and electronic and steric effects of both the diarylpropargyl alcohol and the aryl nucleophiles. High yields of triaryl-allenes and diaryl-indenes by gold(III) catalysis were observed. Depending on the choice of aryl nucleophile and control of reaction temperature, different product ratios have been obtained. Alternatively, tetraaryl-allyl target products were formed by a sequential one-pot tandem process from appropriate propargyl substrates and two different aryl nucleophiles. Corresponding halo-arylation products (I and Br; up to 95 % 2-halo-diaryl-indenes) were obtained in a one-pot manner in the presence of the respective N-halosuccinimides (NIS, NBS).     

Combining Matteson Homologations and Claisen Rearrangements – An Efficient Protocol for Amino Acid Synthesis

The Matteson homologation with vinyl nucleophiles was found to be an efficient and versatile protocol for the synthesis of substituted chiral allyl alcohols in a highly stereoselective fashion. These alcohols can be coupled with N-protected glycine and subsequently subjected to zinc-chelated ester-enolate Claisen rearrangements to yield highly substituted unsaturated amino acids. By varying the nucleophiles used in the Matteson homologations, the method allows control over not only the stereogenic centers but also the side-chain substitution pattern in the newly formed γ,δ-unsaturated amino acids.     

Stereoselective Construction of Tertiary Homoallyl Alcohols and Ethers by Nucleophilic Substitution at Quaternary Carbon Stereocenters

An efficient method for the stereoselective construction of tertiary C−O bonds via a stereoinvertive nucleophilic substitution at the quaternary carbon stereocenter of cyclopropyl carbinol derivatives using water, alcohols and phenols as nucleophiles has been developed. This substitution reaction proceeds under mild conditions and tolerates several functional groups, providing a new access to the stereoselective formation of highly congested tertiary homoallyl alcohols and ethers.     

Gold- and silver-catalyzed reactions of propargylic alcohols in the presence of protic additives

A wide range of primary, secondary and tertiary propargylic alcohols undergo a Meyer-Schuster rearrangement to give enones at room temperature in the presence of a gold(I) catalyst and small quantities of MeOH or 4-methoxyphenylboronic acid. The syntheses of the enone natural products isoegomaketone and daphenone were achieved using this reaction as the key step. The rearrangement of primary propargylic alcohols can readily be combined in a one-pot procedure with the addition of a nucleophile to the resulting terminal enone, to give β-aryl, β-alkoxy, β-amino or β-sulfido ketones. Propargylic alcohols bearing an adjacent electron-rich aryl group can also undergo silver-catalyzed substitution of the alcohol with oxygen, nitrogen and carbon nucleophiles. This latter reaction was initially observed with a batch of gold catalyst that was probably contaminated with small quantities of silver salt.     

Fluorinated alcohols as promoters for the metal-free direct substitution reaction of allylic alcohols with nitrogenated, silylated, and carbon nucleophiles

The direct allylic substitution reaction using allylic alcohols in 1,1,1,3,3,3-hexafluoroisopropanol (HFIP) and 2,2,2-trifluoroethanol (TFE) as reaction media is described. The developed procedure is simple, works under mild conditions (rt, 50 and 70 °C), and proves to be very general, since different nitrogenated nucleophiles and carbon nucleophiles can be used achieving high yields, especially when HFIP is employed as solvent and aromatic allylic alcohols are the substrates. Thus, sulfonamides, carbamates, carboxamides, and amines can be successfully employed as nitrogen-based nucleophiles. Likewise, silylated nucleophiles such as trimethylsilylazide, allyltrimethylsilane, trimethylsilane, and trimethylsilylphenylacetylene give the corresponding allylic substitution products in high yields. Good results for the Friedel-Crafts adducts are also achieved with aromatic compounds (phenol, anisole, indole, and anilines) as nucleophiles. Particularly interesting are the results obtained with electron-rich anilines, which can behave as nitrogenated or carbon nucleophiles depending on their electronic properties and the solvent employed. In addition, 1,3-dicarbonyl compounds (acetylacetone and Meldrum's acid) are also successfully employed as soft carbon nucleophiles. Studies for mechanism elucidation are also reported, pointing toward the existence of carbocationic intermediates and two working reaction pathways for the obtention of the allylic substitution product.     

A facile highly regio- and stereoselective preparation of N-tosyl allylic amines from allylic alcohols and tosyl isocyanate via Palladium(II)-catalyzed aminopalladation-beta-heteroatom elimination

The high regio- and stereoselectivity have been obtained from the allylic substitution reaction catalyzed by palladium(II) species. From allylic alcohols, one-pot reaction with tosyl isocyanate followed by palladium(II)-catalyzed allylic substitution gives N-tosyl (E)-allylic amines in high yield. The substitution occurs only at the gamma-position of the 1- or 3-substituted allylic alcohols.     

Palladium‐Catalyzed Dearomative syn‐1,4‐Oxyamination

A palladium‐catalyzed dearomative syn‐1,4‐oxyamination protocol using non‐activated arenes has been developed. This one‐pot procedure utilizes arenophile chemistry, and the corresponding para‐cycloadducts are treated with oxygen nucleophiles via formal allylic substitution, providing direct access to syn‐1,4‐oxyaminated products. The reaction conditions permit a range of arenes, as well as different O‐nucleophiles, such as oximes and benzyl alcohols. Moreover, this process was established in an asymmetric fashion, delivering products with high enantioselectivity. The dearomatized products are amenable to a multitude of further derivatizations ranging from olefin chemistry to C?H activation, giving rise to a diverse set of new functionalities. Overall, this dearomative functionalization offers rapid and controlled formation of molecular complexity, enabling straightforward access to functionalized small molecules from simple and readily available arenes.     

Tandem synthesis of 1-formyl-1,2,3-triazoles

A tandem method for preparing 4-formyl-1,2,3-triazoles via a two-step one-pot acetal cleavage/CuAAC reaction was developed. Using this method, 4-formyl-1,2,3-triazole analogs with both electron-withdrawing and electron-donating substituents were prepared in good yield and purity. Expansion of this method to a three-step tandem reaction that incorporates an additional step of azide substitution was also successful, circumventing the need for organic azide isolation. This one-pot method, noteworthy in its simplicity and mild conditions, utilizes practical, readily available reactants and relies on protic solvent to promote acid-catalyzed acetal cleavage.     

1-trifluoromethylvinylsilane as a CF2=C(-)-CH2+ synthon: synthesis of functionalized 1,1-difluoro-1-alkenes via isolable 2,2-difluorovinylsilanes

Various 1,1-difluoro-1-alkenes such as monosubstituted 1,1-difluoro-1-alkenes, 2-bromo-1,1-difluoro-1-alkenes, and 3,3-difluoroallylic alcohols are synthesized in two simple steps from 1-trifluoromethylvinylsilane: (i) its SN2' reaction with nucleophiles to construct 2,2-difluorovinylsilanes and (ii) the subsequent substitution of electrophiles for the vinylic silyl group. The combination of these two processes allows a one-pot synthesis of the functionalized 1,1-difluoro-1-alkenes starting from 1-trifluoromethylvinylsilane, which functions as a CF2=C(-)-CH2+ synthon.     

A new and facile synthesis of carbamate- and urea-linked glycoconjugate using modified Curtius rearrangement

We describe a facile synthetic method of carbamate- and urea-linked glycoconjugates using sugar carboxylic acids by the modified Curtius rearrangement. This reaction is a simple one-pot procedure, and various nucleophiles including tertiary alcohols can be utilized to afford desired compounds in moderate to high yields. And the stereospecific synthesis of the anomeric isomers is achieved using the corresponding two stereoisomers of glycosyl carboxylic acid.     

Copper-catalyzed methylenation reaction: total synthesis of (+)-desoxygaliellalactone

The enantioselective total synthesis of (+)-desoxygaliellalactone was achieved in six steps starting from 4-tert-butyldimethylsilyloxybutanal. This synthesis featured a one-pot copper-catalyzed methylenation-Diels-Alder cyclization. The challenging methylenation of aldehyde 4 was studied under various reaction conditions. Whereas Wittig reaction conditions led to byproducts resulting from decomposition of the sensitive butenolide moiety, the mild copper-catalyzed methylenation reaction produced the desired triene in good yield.     

meso-三嗪取代苯基卟啉的简单一锅合成

报道一种以羟基卟啉与三嗪和其它亲核试剂为原料一锅法高产率合成不对称多取代三嗪卟啉化合物的简单方法. 研究了2,4,6-三氯三嗪与羟基卟啉、醇和胺通过分级亲核取代反应合成不对称2,4,6-取代三嗪卟啉的方法和反应条件. 以2,4,6- 三氯三嗪和5-(4-羟基)苯基-10,15,20-三苯基卟啉反应生成卟啉单取代二氯三嗪, 然后进一步与醇或胺反应合成了7个三嗪卟啉新化合物, 产物经元素分析, MS, 1H NMR和UV-Vis进行结构表征.     

Ruthenium-catalyzed propargylic substitution reaction of propargylic alcohols with thiols: a general synthetic route to propargylic sulfides

A novel cationic methanethiolate-bridged diruthenium complex [Cp*RuCl(mu2-SMe)2RuCp*(OH2)]OTf (1e) has been disclosed to promote the catalytic propargylic substitution reaction of propargylic alcohols bearing not only terminal alkyne group but also internal alkyne group with thiols. It is noteworthy that neutral thiolate-bridged diruthenium complexes (1a-1c), which were known to promote the propargylic substitution reactions of propargylic alcohols bearing a terminal alkyne group with various heteroatom- and carbon-centered nucleophiles, did not work at all. The catalytic reaction described here provides a general and environmentally friendly preparative method for propargylic sulfides, which are quite useful intermediates in organic synthesis, directly from the corresponding propargylic alcohols and thiols.     

On a way to new types of the polyfunctional and polytopic systems based on cage metal complexes: Cadmium-promoted nucleophilic substitution with low-active nucleophilic agents

The nucleophilic substitution of the reactive halogen atoms of clathrochelate precursors with soft nucleophilic agents was promoted by cadmium(II) ion using various types of cadmium-containing compounds. Cadmium(II) activates the C–Hal bond both by the coordination of halogen substituents to this ion and the formation of anionic forms of a nucleophilic agent with cadmium amides, that increase the electron density on a reactive site of this agent. The cadmium-promoted substitution reactions of the reactive chlorine ribbed substituents in the di- and hexachlorine-containing clathrochelate precursors afforded the clathrochelate ribbed-functionalized derivatives of soft nucleophiles [alcohols (including fluorinated ones) and aromatic amines (including the nucleophiles with electron-withdrawing substituents)] by efficient one-pot procedures in high yields under mild conditions with generated in situ low-basic cadmium(II) alcoholates and amides. The complexes obtained were characterized using elemental analysis, MALDI-TOF mass spectrometry, IR, UV–Vis, ⁵⁷Fe Mössbauer, and NMR spectroscopies, and X-ray crystallography. The potential of cadmium-promoted reactions for synthesis of different types of organic and coordination compounds is discussed.     

One-pot conversion of activated alcohols into terminal alkynes using manganese dioxide in combination with the Bestmann-Ohira reagent

The direct conversion of activated primary alcohols into terminal alkynes through a sequential one-pot, two-step process involving oxidation with manganese dioxide and then treatment with the Bestmann-Ohira reagent is described. This transformation proceeds efficiently (59-99% yield) under mild reaction conditions with a range of benzylic, heterocyclic and propargylic alcohols. A tandem variant is also described, which is successful only with highly activated substrates.     

Synthesis and Reactions of Trifluoromethyl-Substituted 1,3,5-Triazines

A variety of di- and trifluoromethyl-s-triazines are prepared following straightforward synthetic protocols from simple, commercially available starting materials. Trichloromethyl-substituted triazine electrophiles are obtained in good yield and react with amine nucleophiles to afford aminotriazine products in good to excellent yield. The nucleophilic aromatic substitution reaction is broad in scope and proceeds smoothly with both aromatic and aliphatic (primary, secondary, and branched) amines in the presence of non-participating functional groups including alcohols, carboxylic acids, indoles, and common amine protecting groups. Furthermore, most reactions require only a catalytic amount of 4-DMAP with no stoichiometric base and are complete within two hours at ambient temperature.     

Palladium-catalyzed allylic substitution with (η6-arene-CH2Z)Cr(CO)(3)-based nucleophiles

Although the palladium-catalyzed Tsuji-Trost allylic substitution reaction has been intensively studied, there is a lack of general methods to employ simple benzylic nucleophiles. Such a method would facilitate access to "α-2-propenyl benzyl" motifs, which are common structural motifs in bioactive compounds and natural products. We report herein the palladium-catalyzed allylation reaction of toluene-derived pronucleophiles activated by tricarbonylchromium. A variety of cyclic and acyclic allylic electrophiles can be employed with in situ generated (η(6)-C(6)H(5)CHLiR)Cr(CO)(3) nucleophiles. Catalyst identification was performed by high throughput experimentation (HTE) and led to the Xantphos/palladium hit, which proved to be a general catalyst for this class of reactions. In addition to η(6)-toluene complexes, benzyl amine and ether derivatives (η(6)-C(6)H(5)CH(2)Z)Cr(CO)(3) (Z = NR(2), OR) are also viable pronucleophiles, allowing C-C bond-formation α to heteroatoms with excellent yields. Finally, a tandem allylic substitution/demetalation procedure is described that affords the corresponding metal-free allylic substitution products. This method will be a valuable complement to the existing arsenal of nucleophiles with applications in allylic substitution reactions.     

One-pot process in phosphonium-iodonium ylides: nucleophilic substitution and the Wittig reaction

The nucleophilic substitution in mixed phosphonium-iodonium ylides was investigated. The iodonium group is replaced by such S-containing nucleophiles as the thiocyanate anion or thiourea, as well as by halide ions. The structure of the reaction product with the thiocyanate ion was established by X-ray diffraction. A one-pot process involving the nucleophilic substitution and the Wittig reaction was developed. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 2, pp. 391–395, February, 2008.     

Asymmetric Ring‐Opening of Cyclopropyl Ketones with Thiol,Alcohol, and Carboxylic Acid Nucleophiles Catalyzed by a Chiral N,N′‐Dioxide–Scandium(III) Complex

A highly efficient asymmetric ring‐opening reaction of cyclopropyl ketones with a broad range of thiols, alcohols and carboxylic acids has been first realized by using a chiral N,N′‐dioxide–scandium(III) complex as catalyst. The corresponding sulfides, ethers, and esters were obtained in up to 99 % yield and 95 % ee. This is also the first example of one catalytic system working for the ring‐opening reaction of donor–acceptor cyclopropanes with three different nucleophiles, let alone in an asymmetric version.     

Asymmetric Ring‐Opening of Cyclopropyl Ketones with Thiol,Alcohol, and Carboxylic Acid Nucleophiles Catalyzed by a Chiral N,N′‐Dioxide–Scandium(III) Complex

A highly efficient asymmetric ring‐opening reaction of cyclopropyl ketones with a broad range of thiols, alcohols and carboxylic acids has been first realized by using a chiral N,N′‐dioxide–scandium(III) complex as catalyst. The corresponding sulfides, ethers, and esters were obtained in up to 99 % yield and 95 % ee. This is also the first example of one catalytic system working for the ring‐opening reaction of donor–acceptor cyclopropanes with three different nucleophiles, let alone in an asymmetric version.