Operando X‐Ray Absorption Spectroscopy Shows Iron Oxidation Is Concurrent with Oxygen Evolution in Cobalt–Iron (Oxy)hydroxide Electrocatalysts

Iron cations are essential for the high activity of nickel and cobalt‐based (oxy)hydroxides for the oxygen evolution reaction, but the role of iron in the catalytic mechanism remains under active investigation. Operando X‐ray absorption spectroscopy and density functional theory calculations are used to demonstrate partial Fe oxidation and a shortening of the Fe?O bond length during oxygen evolution on Co(Fe)O_xH_y. Cobalt oxidation during oxygen evolution is only observed in the absence of iron. These results demonstrate a different mechanism for water oxidation in the presence and absence of iron and support the hypothesis that oxidized iron species are involved in water‐oxidation catalysis on Co(Fe)O_xH_y.     

Electrochemical Formation of Fe(IV)=O Derived from H2O2 on a Hematite Electrode as an Active Catalytic Site for Selective Hydrocarbon Oxidation Reactions

The high-valence iron species (Fe(IV)=O) in the cytochrome P450 enzyme superfamily is generated via the activation of O₂, and serves as the active center of selective hydrocarbon oxidation reactions. Furthermore, P450 can employ an alternate route to produce Fe(IV)=O, even from H₂O₂ without O₂ activation. Meanwhile, Fe(IV)=O has recently been revealed to be the reactive intermediate during H₂O oxidation to O₂ on hematite electrodes. Herein, we demonstrated the generation of Fe(IV)=O on hematite electrodes during the electrochemical oxidative decomposition of H₂O₂ using in situ UV-visible absorption spectra. The generation of Fe(IV)=O on hematite electrodes from H₂O₂ exhibited 100 mV lower overpotential than that from H₂O. This is because H₂O₂ serves not only as the oxygen source of Fe(IV)=O, but also as the additional oxidant. Finally, we confirmed that the Fe(IV)=O generated on hematite electrodes can serve as the catalytic site for styrene epoxidation reactions.     

Effect of a spacer on phthalocyanine functionalized cellulose nanofiber mats for decolorizing reactive dye wastewater

We report a novel cobalt tetraaminophthalocyanine (CoPc) functionalized nanomaterial by spacer-arm immobilization of CoPc onto cellulose nanofiber mats. The spacer-arm was attached through the reaction of tetraethylenepentamine with oxidized cellulose nanofiber mats. CoPc was then covalently immobilized onto the spacer-arm using glutaraldehyde. The functionalization processes on the nanofiber mats were monitored by attenuated total reflection Fourier transform infrared spectroscopy and X-ray photoelectron spectroscopy. This CoPc functionalized nanomaterial (CoPc-spacer-NM) was used for decoloration of reactive dye wastewater. Incorporation of the spacer-arm resulted in enhanced decoloration with respect to directly immobilized CoPc onto the cellulose nanofiber mats (CoPc-NM). Compared with CoPc-NM, CoPc-spacer-NM shows much higher adsorption capacity when conducted under acidic conditions, which enhances the catalytic oxidation rate of reactive dye when H₂O₂ was used as an oxidant. Reactive dye wastewater can also be efficiently decolorized by the CoPc-spacer-NM/H₂O₂ system under basic conditions, despite a relatively weak adsorption capacity. Electron paramagnetic resonance results suggested that the catalytic oxidation process involves the formation and reaction of hydroxyl radicals. Gas chromatography–mass spectrometry showed the main products of the catalytic oxidation of reactive red X-3B were biodegradable aliphatic acids, such as oxalic acid, malonic acid and maleic acid.     

[RuIII(EDTA)(H2O)]− catalyzed oxidation of biologically important thiols by H2O2

[Ru^III(EDTA)(H₂O)]^? (EDTA^4? = ethylenediaminetetraacetate) catalyzes the oxidation of biological thiols, RSH (RSH = cysteine, glutathione, N-acetylcysteine, penicillamine) using H₂O₂ as precursor oxidant. The kinetics of the oxidation process were studied spectrophotometrically as a function of [Ru^III(EDTA)(H₂O)]^?, [H₂O₂], [RSH], and pH (4–8). Spectral analyses and kinetic data are suggestive of a catalytic pathway in which the RSH reacts with [Ru^III(EDTA)] catalyst complex to form [Ru^III((EDTA)(SR)]^2? intermediate species. In the subsequent reaction step the oxidant, H₂O₂, reacts directly with the coordinated S of the [Ru^III((EDTA)(SR)]^2? intermediate leading to formation of the disulfido (RSSR) oxidation product (identified by HPLC and ESI-MS studies) of thiols (RSH). Based on the experimental results, a working mechanism involving oxo-transfer from H₂O₂ to the coordinated thiols is proposed for the catalytic oxidation.     

High catalytic performance of the first electrospun nano-biohybrid,Mn3O4/copper complex/polyvinyl alcohol,from Amaranthus spinosus plant for biomimetic oxidation reactions

In this study, a novel nano-biocomposite, polyvinylalcohol/Mn₃O₄/water-soluble copper complex (PVA/Mn₃O₄/CuWSC), was produced from Amaranthus spinosus. By combining water-soluble copper nanocomplex and Mn₃O₄ nanoparticles along with polyvinyl alcohols and extracts of this plant, this bio nanomaterial was prepared via electrospinning process. This nanohybrid was characterized using transmission electron microscopy, scanning electron microscopy, atomic force microscopy, Fourier-transform infrared spectroscopy, X-ray diffraction, energy-dispersive X-ray spectroscopy, and elemental analysis. Based on its catalytic activities, it is considered a heterogeneous catalyst and is used for the oxidation of alcohols in industrial reactions. It can oxidize the primary and secondary alcohols to corresponding aldehyde and ketone products with high yield and excellent selectivity using H₂O₂ under solvent-free conditions. The recyclability and reusability of PVA/Mn₃O₄/CuWSC show that it can be a promising catalyst for clean industrial catalytic applications.     

Formation of a promazine radical and promazine 5‐oxide in the reaction of promazine with hydrogen peroxide: Mechanistic insight from kinetic and EPR measurements

The kinetics of the oxidation of promazine (PMZ) by hydrogen peroxide was studied in the presence of a large excess of H₂O₂ in acidic chloride media using UV–vis spectroscopy. The reaction proceeds via two consecutive steps. In the first step, oxidation leads to formation of a promazine radical. In the second step, the promazine radical is oxidized to promazine 5‐oxide. Electron paramagnetic resonance spectroscopy (EPR) results provide clear evidence for the formation of an intermediate promazine radical. Linear dependences of the pseudo‐first‐order rate constants (k₁ and k₂) on [H₂O₂] with a nonzero intercept were established for the first and the second process, respectively. The rate of the first stage of the reaction increased slightly with increasing concentration of O₂, indicating the role of the OH^? radicals on the redox process, which are transformed into the Cl radicals. The mechanism of the overall reaction is discussed on the basis of all these kinetic measurements. © 2009 Wiley Periodicals, Inc. Int J Chem Kinet 42: 1–9, 2010     

Iron oxide on carbon‐based supports as efficient catalysts for organic compounds oxidation

For the first time, iron oxide on carbon aerogel, amine functionalized carbon nanotube, black carbon and carboxylic acid functionalized carbon nanotube in the presence of H₂O₂ was reported as an efficient and stable catalyst for the selective oxidation of sulfides and alcohols. The catalysts were characterized by scanning electron microscopy, energy‐dispersive spectroscopy, transmission electron microscopy, X‐ray photoelectron spectroscopy, X‐ray diffraction, Fourier transform infrared spectroscopy and atomic absorption spectroscopy. In the next step, catalytic reactivity toward sulfide to sulfoxide and alcohol to aldehyde/ketone oxidation in the presence of H₂O₂ was studied and discussed.     

Study on the Phenolic Oxidation by H2O2 Using Metallomicelles Composed of Dinuclear Copper(II) Complex as Synthetic Peroxidases

A dinuclear copper(II) complex [Cu₂(oxheel)] was synthesized and its structure was analyzed. This compound was then mixed with a surfactant (Brij35 or LSS) to form a metallomicelle, which would catalyze the phenol oxidation with the hydrogen peroxide (H₂O₂). The reaction mechanism and the mathematic model for the kinetics of this reaction were proposed, and the effect of the molar ratio between H₂O₂ and catalyst, of the temperature and of the pH levels on the rate of catalytic reaction were studied.     

Fast Oxygen Reduction Catalyzed by a Copper(II) Tris(2‐pyridylmethyl)amine Complex through a Stepwise Mechanism

Catalytic pathways for the reduction of dioxygen can either lead to the formation of water or peroxide as the reaction product. We demonstrate that the electrocatalytic reduction of O₂ by the pyridylalkylamine copper complex [Cu(tmpa)(L)]²⁺ in a neutral aqueous solution follows a stepwise 4 e^?/4 H⁺ pathway, in which H₂O₂ is formed as a detectable intermediate and subsequently reduced to H₂O in two separate catalytic reactions. These homogeneous catalytic reactions are shown to be first order in catalyst. Coordination of O₂ to Cu^I was found to be the rate‐determining step in the formation of the peroxide intermediate. Furthermore, electrochemical studies of the reaction kinetics revealed a high turnover frequency of 1.5×10⁵ s^?1, the highest reported for any molecular copper catalyst.     

Caught in the Hinact: Crystal Structure and Spectroscopy Reveal a Sulfur Bound to the Active Site of an O2‐stable State of [FeFe] Hydrogenase

[FeFe] hydrogenases are the most active H₂ converting catalysts in nature, but their extreme oxygen sensitivity limits their use in technological applications. The [FeFe] hydrogenases from sulfate reducing bacteria can be purified in an O₂‐stable state called H_inact. To date, the structure and mechanism of formation of H_inact remain unknown. Our 1.65 Å crystal structure of this state reveals a sulfur ligand bound to the open coordination site. Furthermore, in‐depth spectroscopic characterization by X‐ray absorption spectroscopy (XAS), nuclear resonance vibrational spectroscopy (NRVS), resonance Raman (RR) spectroscopy and infrared (IR) spectroscopy, together with hybrid quantum mechanical and molecular mechanical (QM/MM) calculations, provide detailed chemical insight into the H_inact state and its mechanism of formation. This may facilitate the design of O₂‐stable hydrogenases and molecular catalysts.     

Oxidation of aminothiols by molecular oxygen catalyzed by copper ions. Stoichiometry of the reaction

Catalysis of oxidation of aminothiols by copper ions was studied depending on the structure of aminothiols and pH of the medium. The catalytic reaction proceeds in the inner coordination sphere of Cu⁺. At pH 7—9, oxidation of bidentate aminothiols involves reduction of O₂ to H₂O₂. At pH 9—13, oxidation of chelating aminothiols is accompanied by reduction of O₂ to H₂O, whereas oxidation of weak-chelating aminothiols still proceeds by the former mechanism. In this process, the thiolate anions coordinated to the Cu⁺ ions lose one electron each and are oxidized to amino disulfides, which go from the inner sphere of the Cu⁺ complex into a solution. Procedures developed for the determination of amino disulfides, the chemiluminescence determination of H₂O₂ in the presence of aminothiols as luminescence quenchers, and a modified polarographic procedure for the determination of O₂ allowed us to establish that oxidation of aminothiols is not accompanied by catalytic decomposition of H₂O₂ that formed.     

Functionalization of cellulose nanofiber mats with phthalocyanine for decoloration of reactive dye wastewater

A versatile method is reported for the preparation of cellulose nanofiber mats immobilized with cobalt tetraaminophthalocyanine (CoPc). This functionalized cellulose nanomaterial was used as an efficient catalyst for the decoloration of reactive dye wastewater. Cellulose acetate was electrospun into nanofiber mats (CA-NM), hydrolyzed with KOH, and then oxidized by NaIO₄ to generate aldehyde groups for CoPc immobilization. The functionalization processes on the nanofiber mats were monitored by attenuated total reflection Fourier transform infrared spectroscopy (ATR/FT-IR), X-ray photoelectron spectroscopy (XPS), and field emission scanning electron microscope (FESEM). We found these CoPc-functionalized nanofiber mats (CoPc-NM) have high adsorption capacity for reactive dye from synthetic wastewater, which enhances the catalytic oxidation rate of reactive dye when H₂O₂ is present as oxidant. More than 90% of reactive red X-3B can be eliminated by CoPc-NM/H₂O₂ in 90?min. UV and GC-MS analyses indicate the catalytic oxidation not only breaking the azo linkages but also decomposing the aromatic parts of reactive red X-3B, and the main products are biodegradable aliphatic acids, such as fumaric acid, succinic acid, and maleic acid, etc. Repetitive measurements also show that this CoPc-NM is quite stable and remains efficient with no obvious decrease of catalytic activity.     

Oxidation Reaction of Phenol with H2O2 Catalyzed by Metallomicelles Made of Co(II) and Cu(II) Complexes of Imidazole Groups and Micelle as Mimic Peroxidase

The imidazole derivatives (N,N‐bis(2‐ethyl‐5‐methyl‐imidazole‐4‐ylmethyl) amino‐propane (biap)) and its complexes containing cobalt or copper ion were synthesized in this study. The oxidation reaction of phenol with oxidant H₂O₂ catalyzed by the metallomicelle made of the complexes of imidazole groups and micelle (CTAB, Brij35, LSS) as the mimetic peroxidase was studied. The results show that the reaction rate for the catalytic oxidation of phenol increases by a factor of approximately 1×10⁵ in the metallomicelle over that in the simple micelles or the pure buffer solution at pH=6.9 and 25°C. The catalytic effects changed with H₂O₂, temperature, pH, and surfactant kind in the catalytic reactive process are discussed. A kinetic mathematic model of the phenol oxidation catalyzed by the metallomicelle is proposed.     

Role of catechin on collagen type I stability upon oxidation: a NMR approach

Abstract

The study focuses on the understanding, at molecular level, the mechanism of interaction between protein and flavonoids. Collagen and catechin interactions were investigated by NMR in solution and solid state. The effect of catechin on the stability of collagen to oxidation was also explored. Collagen was treated with two concentrations of catechin solutions. Oxidation was carried out by incubation of collagen solution with three oxidation systems: Fe(II)/H₂O₂, Cu(II)/H₂O₂, and NaOCl/H₂O₂. The effects of oxidation systems were evaluated by high resolution 1?D and 2?D proton spectroscopy and solid state NMR (¹³C CP MAS) experiments. Interactions between collagen and catechin preferentially occur between catechin B ring and the amino acids Pro and Hyp of collagen. Results showed that both iron and copper oxidation systems were able to interact with collagen by site specific attack. Moreover, catechin protects collagen proline from oxidation by metal/H₂O₂ systems, preventing copper and iron approach to collagene molecule;this behaviour was more evident for the copper/H₂O₂ system.     

Removal of dibenzothiophene in diesel oil by oxidation over a promoted activated carbon catalyst

Oxidative removal of dibenzothiophene (DBT) in n-octane solution by H₂O₂ on a promoted activated carbon (AC) catalyst was studied. DBT adsorption and catalytic behaviors on AC were examined. Effects of pH in aqueous phase, amounts of AC and formic acid (HCOOH) for promotion as well as initial molar H₂O₂/S ratio were investigated. Experimental results led to conclusion that DBT was readily oxidized by H₂O₂ over an AC catalyst promoted by HCOOH. Suitable amount of AC can improve the activity of H₂O₂ resulting in a deeper extent of sulfur removal. A 100% conversion of DBT in an octane solution by H₂O₂ oxidation was attained on the HCOOH-H₂O₂/AC catalyst at 80°C for a reaction time of 30 min.     

THE PHOTO-OXIDATION OF N, N-DIETHYLHYDROXYLAMINE BY ROSE BENGAL IN ACETONITRILE AND WATER

The Rose Bengal photosensitized oxidation of N,N-diethylhydroxylamine has been investigated in water and acetonitrile using the techniques of oxygen uptake, singlet oxygen phosphorescence and electron spin resonance. In both solvents H₂O₂ is the major oxidation product and diethylnitroxide is an intermediate. In water, superoxide dismutase decreases oxygen uptake suggesting involvement of superoxide anions in the oxidation process. Results indicate that in water the photo-oxidation proceeds mainly by a Type I(electron transfer) mechanism, while in acetonitrile a Type II(energy transfer) mechanism has been confirmed (Encinas et al., 1987, J. Chem. Soc. Perkin Trans. II,1125–1127).     

Biocatalytic Oxidative Cascade for the Conversion of Fatty Acids into α‐Ketoacids via Internal H2O2 Recycling

The functionalization of bio‐based chemicals is essential to allow valorization of natural carbon sources. An atom‐efficient biocatalytic oxidative cascade was developed for the conversion of saturated fatty acids to α‐ketoacids. Employment of P450 monooxygenase in the peroxygenase mode for regioselective α‐hydroxylation of fatty acids combined with enantioselective oxidation by α‐hydroxyacid oxidase(s) resulted in internal recycling of the oxidant H₂O₂, thus minimizing degradation of ketoacid product and maximizing biocatalyst lifetime. The O₂‐dependent cascade relies on catalytic amounts of H₂O₂ and releases water as sole by‐product. Octanoic acid was converted under mild conditions in aqueous buffer to 2‐oxooctanoic acid in a simultaneous one‐pot two‐step cascade in up to >99 % conversion without accumulation of hydroxyacid intermediate. Scale‐up allowed isolation of final product in 91 % yield and the cascade was applied to fatty acids of various chain lengths (C6:0 to C10:0).     

Unraveling the Structure Transition and Peroxidase Mimic Activity of Copper Sites over Atomically Dispersed Copper-Doped Carbonized Polymer Dots

The lack of systematic structural resolution makes it difficult to build specific transition-metal-atom-doped carbonized polymer dots (TMA-doped CPDs). Herein, the structure-activity relationship between Cu atoms and CPDs was evaluated by studying the peroxidase-like properties of Glu−Cu−CPDs prepared by using copper glutamate (Glu) with a Cu−N₂O₂ initial structure. The results showed that the Cu atoms bound to Glu−Cu−CPDs in the form of Cu−N₂C₂, indicating that Cu−O bonds changed into Cu−C bonds under hydrothermal conditions. This phenomenon was also observed in other copper-doped CPDs. Moreover, the carboxyl and amino groups content decreased after copper-atom doping. Theoretical calculations revealed a dual-site catalytic mechanism for catalyzing H₂O₂. The detection of intracellular H₂O₂ suggested their application prospects. Our study provides an in-depth understanding of the formation and catalytic mechanism of TMA-doped-CPDs, allowing for the generation specific TMA-doped-CPDs.     

Synthesis of Fe3O4@SiO2@DOPisatin‐Ni(II) and Cu(II) nanoparticles: Highly efficient catalyst for the synthesis of sulfoxides and disulfides

The catalytic activity of two magnetic catalysts Fe₃O₄@SiO₂@DOPisatin‐M(II) (M = Ni, Cu) was investigated in the environmentally green H₂O₂ oxidant‐based oxidation of sulfides to sulfoxides and oxidative coupling of thiols to disulfides. By using these catalysts, various substrates were successfully converted into their corresponding product. These catalysts could also be reused multiple time without significant loss of activity. The physical and chemical properties of the catalysts were determined using scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FT‐IR), X‐ray diffraction (XRD), thermogravimetric analysis (TGA), vibrating sample magnetometer (VSM), energy dispersive X‐ray spectroscopy (EDX) and atomic absorption spectroscopy (AAS).     

纳米Ce1—xMnxO2催化剂上乙醇催化氧化发光研究

研究了纳米Ce_1—xMn_xO₂上乙醇催化氧化发光特性, 重点考察了反应温度和催化剂组成(Ce/Mn比)对发光强度的影响规律. 为研究催化发光机理, 在相近的反应条件下考察了纳米Ce_1—xMn_xO₂上乙醇催化氧化反应的活性和选择性. 结果表明: 催化发光强度与催化反应中生成CH₃CHO的产率有很好的顺变关系, 表明CH₃CHO是导致C₂H₅OH分子在纳米Ce_1—xMn_xO₂催化剂上氧化发光的“活性分子”.