超临界CO2萃取异甘草素的提取工艺

采用正交试验与单因素试验相结合方法对异甘草素的超临界CO2提取工艺进行了研究,并与常规索氏提取法的实验结果进行了对比。得到的最佳工艺参数为:萃取压力30 MPa、萃取温度45℃、夹带剂85％乙醇、液固比为5:1、CO2流量10 kg／h、分离压力5．5 MPa、分离温度35℃。实验结果表明,在优化的条件下,超临界CO2萃取异甘草素的提取率为0．035％,异甘草素在提取物中的质量分数为0．84％,分别是索氏提取法提取率的3．5倍,质量分数的3．0倍。超临界CO2萃取异甘草素所用时间短、溶剂用量少、提取效率高、环境友好,是一种高效、快速提取异甘草素的方法。     

超临界二氧化碳萃取甘草黄酮的工艺

中药甘草为豆科植物甘草 (GlycyrrhizauralensisFisch .)的根及根状茎。对其药理性能以往均以甘草酸为研究重点[1 ] ,近年来陆续发现甘草黄酮类成分的重要药理作用[2 ] 。傅乃武等[3] 证实甘草中的黄酮类成分有明显的抗氧化作用 ;王根生等[4] 报道甘草根中富黄酮组分 (GF)对CCl4或乙醇所致的小鼠肝损伤有保护作用。Hatano等[5] 证明甘草根茎中的某些黄酮类化合物对Molt4细胞所诱导的Plant细胞对HIV有较强的抑制作用。甘草黄酮类天然药物已成为国内外新药研究和开发的热点。超临界二氧化碳萃取法 (SFE CO2 )具有提取温度低、提取率高…     

自旋交叉配合物[Fe(ttd)2(NCS)2]·H2O的合成和磁性研究

The ligand ttd(ttd=1,4,8,9-Tetraaza-triphenylene-2,3-dicarbonitrile) and a novel spin crossover complex [Fe(ttd)₂(NCS)₂]·H₂O were synthesized, and characterized by elemental analysis, IR, MS, and UV-vis spec-troscopy. The temperature dependence of magnetic susceptibility shows that there are a little break between 150～190K and an unusual step transition with a 50K width between 190～240K. Compared with the other complexes with the resemble structure, it can be found that the influence of ligand is very notable.     

Guest‐, Light‐ and Thermally‐Modulated Spin Crossover in [FeII2] Supramolecular Helicates

A new bis(pyrazolylpyridine) ligand (H₂L) has been prepared to form functional [Fe₂(H₂L)₃]⁴⁺ metallohelicates. Changes to the synthesis yield six derivatives, X@[Fe₂(H₂L)₃]X(PF₆)₂?xCH₃OH ( 1 , x=5.7 and X=Cl; 2 , x=4 and X=Br), X@[Fe₂(H₂L)₃]X(PF₆)₂?yCH₃OH?H₂O ( 1 a , y=3 and X=Cl; 2 a , y=1 and X=Br) and X@[Fe₂(H₂L)₃](I₃)₂?3 Et₂O ( 1 b , X=Cl; 2 b , X=Br). Their structure and functional properties are described in detail by single‐crystal X‐ray diffraction experiments at several temperatures. Helicates 1 a and 2 a are obtained from 1 and 2 , respectively, by a single‐crystal‐to‐single‐crystal mechanism. The three possible magnetic states, [LS–LS], [LS–HS], and [HS–HS] can be accessed over large temperature ranges as a result of the structural nonequivalence of the Fe^II centers. The nature of the guest (Cl^? vs. Br^?) shifts the spin crossover (SCO) temperature by roughly 40 K. Also, metastable [LS–HS] or [HS–HS] states are generated through irradiation. All helicates (X@[Fe₂(H₂L)₃])³⁺ persist in solution.     

人参中稀有皂苷临界二氧化碳超提取

针对人参稀有皂苷极性较小的特点,选择超临界二氧化碳流体(SFE-CO2)技术进行提取,最佳提取实验条件为:压力35 MPa,温度50 ℃,夹带剂为70%乙醇,夹带剂用量为1.7 mL/g。 利用高效液相色谱 电喷雾质谱联用分析方法分析其萃取产物,证明该提取方法的提取效率与超声提取接近,且该方法具有环境友好的特点。     

可蒸镀自旋交叉配合物的薄膜与器件

自旋交叉配合物在温度、压力、光照和磁场等刺激下可以发生高低自旋态之间的可逆转变,通常还伴随着颜色、体积和电导率变化以及热滞等效应,因此这类材料在光热开关、传感器、显示和存储等领域具有潜在的应用.由于可以获得高质量的超洁净薄膜,高真空蒸镀工艺常用于分子电子学与分子磁学等的器件制备,目前报道的可蒸镀自旋交叉配合物种类较少,大大限制了自旋交叉配合物的器件应用.针对可蒸镀自旋交叉配合物的薄膜与器件进行了系统的综述,介绍了几种主要的适于高真空蒸镀的自旋交叉配合物,结合不同的表征手段分析了衬底对分子薄膜自旋转变特性的影响,并针对相关的概念性器件进行了讨论,最后对自旋交叉配合物在器件应用中存在的难点和未来的发展趋势进行了展望和评述,希望能够为自旋交叉领域的器件应用提供一些借鉴.     

自旋交叉配合物[Fe(mtt)(phen)(NCS)2]·py的合成和磁性研究

设计制备了一个新的自旋交叉配合物[Fe(mtt)(phen)(NCS)2·]py。通过元素分析、红外光谱、质谱和紫外光谱等方法对该配合物进行结构表征。变温磁化率研究发现该配合物的自旋转换温度为Tc↑=197K,Tc↓=188K,回滞宽度9K。通过与同体系其他配合物的比较发现,配体的修饰对自旋交叉临界温度以及回滞宽度都有显著影响。     

Confined Crystallization of Spin‐Crossover Nanoparticles in Block‐Copolymer Micelles

Nanoparticles of the spin‐crossover coordination polymer [FeL(bipy)]_n were synthesized by confined crystallization within the core of polystyrene‐block‐poly(4‐vinylpyridine) (PS‐b‐P4VP) diblock copolymer micelles. The 4VP units in the micellar core act as coordination sites for the Fe complex. In the bulk material, the spin‐crossover nanoparticles in the core are well isolated from each other allowing thermal treatment without disintegration of their structure. During annealing above the glass transition temperature of the PS block, the transition temperature is shifted gradually to higher temperatures from the as‐synthesized product (T_1/2↓=163 K and T_1/2↑=170 K) to the annealed product (T_1/2↓=203 K and T_1/2↑=217 K) along with an increase in hysteresis width from 6 K to 14 K. Thus, the spin‐crossover properties can be shifted towards the properties of the related bulk material. The stability of the nanocomposite allows further processing, such as electrospinning from solution.     

New CO2-philic Compounds： Design, Synthesis and Solubility in Supercritical Carbon Dioxide

Liquid and supercritical carbon dioxide (scCO2) have attracted much attention as “green” replacement for organic solvents, offering economical and environmental benefits due to its favorable physical and chemical properties, such as recyclability, ease …     

Homogeneous Phase Polymerization of Vinylidene Fluoride in Supercritical CO2: Surfactant Free Synthesis and Kinetics

Summary: Vinylidene fluoride (VDF) polymerizations were carried out in homogeneous phase with supercritical carbon dioxide (scCO₂) at 120 °C and 1500 bar. To control molecular weight perfluorohexyl iodide was used. Molecular weight analysis by size-exclusion chromatography indicates that polymers of low polydispersities ranging from 1.5 to 1.2 at the highest iodide concentration of 0.25 mol · L⁻¹ were obtained. In addition, polymer molecular weight increases linearly with reaction time, indicating that living conditions were established. The “livingness” is based on the labile C-I bond. The weakness of the C-I bond is associated with a fast decomposition of the original hexyl iodide, thus, contributing to initiation and to a significant increase in the initiation rate in the initial phase of the polymerization.     

Oxidation of n-Butanol and 2-Pentanol with Molecular Oxygen in Supercritical CO2

Oxidation of n-butanol and 2-pentanol using molecular oxygen in supercritical (SC) CO2 with and without co-solvent is investigated. The results showed that the reaction selectivity is high when the reaction is carried out in SC CO2. It has been observed that co-solvent affects conversion and selectivity of the reaction considerably.     

超临界CO2协助多单体接枝改性聚丙烯

利用超临界CO2作为溶胀剂和携带剂,使小分子单体马来酸酐和苯乙烯单体(MAH与St)及引发剂过氧化苯甲酰(BPO)插嵌进入聚丙烯(PP)基质中,然后在100℃条件下反应4 h得到接枝产物。研究了不同超临界CO2条件及引发剂浓度对接枝率的影响,固定超临界流体压力,改变温度,42℃为最佳温度,接枝率达到2.2%;固定温度,改变压力,10 MPa为最佳条件,接枝率为2.3%。对样品的FT-IR和SEM分析表明,共单体确实接枝到了PP分子链上,而DSC分析表明,随着接枝率的提高,材料的熔点(Tm)及表观结晶度(Ca)下降。这可能是接枝破坏了PP链结构的规整性,同时扩大了分子链间的距离所致。     

Synthesis of Spin‐Crossover Nano‐ and Micro‐objects in Homogeneous Media

New methods are proposed for the synthesis of spin‐crossover nano‐ and micro‐objects. Several nano‐objects that are based upon the spin‐crossover complex [Fe(hptrz)₃](OTs)₂ (hptrz=4‐heptyl‐1,2,4‐triazole, Ts=para‐toluenesulfonyl) were prepared in homogeneous media. The use of various reagents (Triton X‐100, PVP, TOPO, and PEGs of different molecular weights) as stabilizing agents yielded materials of different size (6 nm–2 μm) and morphology (nanorods, nanoplates, small spherical particles, and nano‐ and micro‐crystals). In particular, when Triton X‐100 was used, a variation in the morphology from nanorods to nanoplates was observed by changing the nature of the solvent. Interestingly, the preparation of the nanorods and nanoplates was always accompanied by the formation of small spherical particles. Alternatively, when PEG was used, 200–400 nm crystals of the complex were obtained. In addition, a very promising polymer‐free synthetic method is discussed that was based on the preparation of relatively stable Fe^II–triazole oligomers in CHCl₃. Their specific treatment led to micro‐crystals, small nanoparticles, or gels. The size and morphology of all of these objects were characterized by TEM and by dynamic light scattering (DLS) where possible. Their spin‐crossover behavior was studied by optical and magnetic measurements. The spin‐transition features for large particles (>100 nm) were very similar to that of the bulk material, that is, close to room temperature with a hysteresis width of up to 8 K. The effects of the matrix and/or size‐reduction led to modification of the transition temperature and an abruptness of the spin transition for oligomeric solutions and small nanoparticles of 6 nm in size.     

常温自旋交叉配合物[Fe(dpp)(Mepy)2(NCS)2]的合成与磁性研究

设计制备了一个新的常温自旋交叉配合物[Fe(dpp)(Mepy)2(NCS)2]。通过元素分析、红外光谱、电喷雾质谱和紫外光谱等方法对该配合物进行结构表征。变温磁化率研究发现该配合物的自旋转换温度Tc为330K。通过与同体系其他配合物的比较发现,配体的修饰对自旋交叉临界温度以及回滞宽度都有显著影响。     

Anthraquinone and Azo Dyes in Dyeing Processes of PET Films and PET Knitted Fabrics Using Supercritical CO2 Medium

Summary: Dyeing processes using supercritical fluid present advantages over the conventional dyeing process using aqueous medium. Previous works from our group on polymeric fibers such as N,N-dimethylacrylamide (DMAAm) modified poly(ethylene terephthalate), PET, showed higher sorption of disperse dyes in supercritical medium. Furthermore, recent studies showed that the association of UV radiation and DMAAm treatment leads to a better incorporation of dyes in modified PET soaked in aqueous medium. In this work, modified and non-modified PET knitted fabrics (KF) were dyed in supercritical CO₂ medium. Azo and anthraquinone dyes were used in order to compare the extent of incorporated dye in PET films and PET KF in supercritical CO₂. The dyeing process variables were studied by factorial design and by a response surface methodology (RSM) technique. The anthraquinone dye presented a better incorporation in PET than the azo dye. The UV light exposure and the dyeing times inputs showed positive main effects in the incorporation of dyes in PET films and PET KF. From the RSM data, DMAAm and UV light modified PET KF presented 7.43 mg of incorporated azo dye by g of PET if the optimized dyeing conditions, time: 135 min and pressure: 212 bar would be used. In the respective optimized dyeing conditions for the anthraquinone dye, time 150 min and pressure 229 bar, the incorporated dye would be 22.9 mg of dye by g of PET.     

FeIII Quinolylsalicylaldimine Complexes: A Rare Mixed‐Spin‐State Complex and Abrupt Spin Crossover

A new synthesis of (8‐quinolyl)‐5‐methoxysalicylaldimine (Hqsal‐5‐OMe) is reported and its crystal structure is presented. Two Fe^III complexes, [Fe(qsal‐5‐OMe)₂]Cl ? solvent (solvent=2 MeOH ? 0.5 H₂O ( 1 ) and MeCN ? H₂O ( 2 )) have been prepared and their structural, electronic and magnetic properties studied. [Fe(qsal‐5‐OMe)₂] Cl ? 2 MeOH ? 0.5 H₂O ( 1 ) exhibits rare crystallographically independent high‐spin and low‐spin Fe^III centres at 150 K, whereas [Fe(qsal‐5‐OMe)₂]Cl ? MeCN ? H₂O ( 2 ) is low spin at 100 K. In both structures there are extensive π–π and C? H???π interactions. SQUID magnetometry of 2 reveals an unusual abrupt stepped‐spin crossover with T_1/2=245 K and 275 K for steps 1 and 2, respectively, with a slight hysteresis of 5 K in the first step and a plateau of 15 K between the steps. In contrast, 1 is found to undergo an abrupt half‐spin crossover also with a hysteresis of 10 K. The two compounds are the first Fe^III complexes of a substituted qsal ligand to exhibit abrupt spin crossover. These conclusions are supported by ⁵⁷Fe Mössbauer spectroscopy. Both complexes exhibit reversible reduction to Fe^II at ?0.18 V and irreversible oxidation of the coordinated qsal‐5‐OMe ligand at +1.10 V.     

甲烷氧化菌素介导一步法合成合成纳米银

以硝酸银为前体物,甲烷氧化菌素(Mb)将Ag(Ⅰ)还原Ag(0),并形成纳米银粒子(AgNPs),同时Mb吸附在形成的AgNPs表面,起到保护剂作用避免AgNPs聚集沉淀.采用紫外-可见光谱、荧光光谱、红外光谱、透射电镜和X射线电子能谱等对合成的AgNPs粒子过程、Mb合成AgNPs官能团、AgNPs形貌和AgNPs结构及价态等进行了分析.结果表明Mb可以一步法合成AgNPs离子.     

超临界CO2协助三单体接枝改性聚丙烯

利用超临界二氧化碳(SC CO2)作为单体的溶剂和聚丙烯的溶胀剂, 通过自由基接枝聚合合成了聚丙烯与丙烯酸、甲基丙烯酸甲酯以及马来酸酐的接枝产物PP-g-(AA-MMA-MAH). 在单体的选择上采取软、硬单体复配的方式来调节链的柔韧性. 考察了溶胀条件、接枝条件以及单体配比对接枝反应的影响, 研究结果表明, PP和单体以及引发剂在7.74 MPa、47 ℃下溶胀5 h后, 75 ℃下反应3 h时接枝率为4.31%, 接枝效率可达71.83%. 产品表征说明单体均匀地接枝到聚丙烯颗粒上; 改性后聚丙烯水润湿角降低, 亲水性能得到明显改善; 接枝单体的引入提高了PP的热稳定性.