锂离子电池硅基复合物负极材料*

作为颇有前途的锂离子电池负极材料,硅基材料的研究日益受到重视。硅基负极材料在充放电循环中体积变化过大导致的循环性能差、首次库仑效率低等始终是阻碍其商业化的主要问题。纳米化、合金化和碳包覆是有效的解决措施。本文详细论述了TiB2、TiN、TiC作为基质的硅-化合物复合物,Fe-Si、Cu-Si、Ni-Si体系的硅-金属复合物和硅-碳复合物的研究进展。在硅-碳复合物的研究上,综述了分别采用热解法、球磨法、球磨-热解法、化学聚合法合成,以聚吡咯、聚氯乙烯、聚丙烯腈、间苯二酚-甲醛、柠檬酸、环氧树脂等为碳源的研究进展,同时也综述了Si/碳纳米管复合电极材料的研究情况。     

二维层状氮化二钙作为钠离子电池负极材料

以Ca₃N₂为前驱体,用高温热解法制备了2D层状结构Ca₂N 并用X射线和扫描电镜对Ca₂N的组成、结构和形貌进行了表征。 作为钠离子电池新型负极材料,在50 mA/g电流密度充放电,首次放电比容量可达584 mA·h/g,可逆比容量达180 mA·h/g。在2000 mA/g大电流密度下,仍有70 mA·h/g。     

锂离子电池硅纳米线负极材料研究

采用涂膜法和直接生长成膜法分别制备两种硅纳米线电极.XRD、SEM和充放电曲线表征、观察和测定材料嵌锂状态过程的结构、形貌及电化学性能.与涂膜法相比,直接生长成膜法制备的硅纳米线电极具有较高的比容量、良好的循环寿命及较好的倍率性能;直接生长成膜法制备的硅纳米线电极,其嵌锂过程硅由晶态逐渐转变为非晶态,且其纳米线直径逐渐增大,但线状结构仍保持完好,进而防止了电极粉化和脱落.     

Hierarchical Mesoporous SnO Microspheres as High Capacity Anode Materials for Sodium‐Ion Batteries

Mesoporous SnO microspheres were synthesised by a hydrothermal method using NaSO₄ as the morphology directing agent. Field emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM) and high‐resolution transmission electron microscopy (HRTEM) analyses showed that SnO microspheres consist of nanosheets with a thickness of about 20 nm. Each nanosheet contains a mesoporous structure with a pore size of approximately 5 nm. When applied as anode materials in Na‐ion batteries, SnO microspheres exhibited high reversible sodium storage capacity, good cyclability and a satisfactory high rate performance. Through ex situ XRD analysis, it was found that Na⁺ ions first insert themselves into SnO crystals, and then react with SnO to generate crystalline Sn, followed by Na–Sn alloying with the formation of crystalline NaSn₂ phase. During the charge process, there are two slopes corresponding to the de‐alloying of Na–Sn compounds and oxidisation of Sn, respectively. The high sodium storage capacity and good electrochemical performance could be ascribed to the unique hierarchical mesoporous architecture of SnO microspheres.     

锂离子电池纳米级负极材料的研究

综述了锂离子电池纳米级碳材料、锡基材料和合金材料近几年的研究成果及发展方向,探讨了该类材料目前存在的问题及解决的办法,对该类材料的发展趋势进行了展望.     

锂离子电池Sn基合金负极材料

发展高安全性、高能量、低成本、长寿命锂离子电池是当前动力电池应用面临的巨大挑战。电池的性能主要取决于正负极电极材料的性能。Sn基合金负极具有高能量和安全特性,是一种很有产业化前景的锂离子电池负极材料。本文综述了Sn基合金电极作为锂离子电池负极的最新研究进展,对Sn基合金负极的不同制备方法进行了总结,重点介绍了锡基合金负极材料在电化学性能方面所存在的问题及其原因,包括锡基活性物质的损失、SEI膜和氧化膜的形成、纳米粒子的团聚和锂离子嵌入过程中死锂的产生等影响合金充放电性能的因素,最后展望了以提高Sn基合金负极电化学性能为目的的研究趋势。     

层状钛硅酸盐化合物作为锂离子电池负极储能材料

锂离子二次电池是手提设备的重要电力来源。近年来,人们为了寻找更新颖更好的锂离子电极材料,开始研究晶形离子交换材料,这种材料具有开放孔道,能够让离子在多孔框架里自由的进出。一种具有层状结构的钛硅酸盐Na-JDF-L1(Na₄Ti₂Si₈O₂₂·4H₂O)经过离子交换后被用作锂离子负极材料。它在循环200次后放电容量保持在364 mAh·g^-1,并且库伦效率约为100%。通过将TiO₂引入Li(Na)-JDF-L1中,有效的提高了材料的首次库伦效率和倍率放电性能。     

CoO填充多壁碳纳米管作为锂离子电池负极材料

碳纳米管自1990年被日本科学家Iijima发现以来[1],由于其独特的结构组成而具有良好的强度和弹性模量、高比表面积、良好的耐腐蚀性和导电性等特点受到了广泛的关注,并已在催化剂载体、纳米电子器件、储能材料、复合功能材料等诸多领域得到应用。多壁碳纳米管(MWCNT)是由多层石墨卷绕而成的同心圆筒,石墨层间距约为0.034nm,管径一般为几十纳米,管长可达数微米,因此多壁碳纳米管具有较高的长径比,可以被看作一维纳米线。由于多壁碳纳米管在管壁之间和管腔之中存在大量空间,为锂离子的嵌入提供了可能,因此近年来关于多壁碳纳米管储锂的研究…     

层状钛硅酸盐化合物作为锂离子电池负极储能材料

锂离子二次电池是手提设备的重要电力来源。近年来, 人们为了寻找更新颖更好的锂离子电极材料, 开始研究晶形离子交换材料, 这种材料具有开放孔道, 能够让离子在多孔框架里自由的进出。一种具有层状结构的钛硅酸盐Na-JDF-L1(Na₄Ti₂Si₈O₂₂·4H₂O)经过离子交换后被用作锂离子负极材料。它在循环200次后放电容量保持在364 mAh·g^-1, 并且库伦效率约为100%。通过将TiO₂引入Li(Na)-JDF-L1中, 有效的提高了材料的首次库伦效率和倍率放电性能。     

High‐Capacity Anode Materials for Sodium‐Ion Batteries

Na‐ion batteries are an attractive alternative to Li‐ion batteries for large‐scale energy storage systems because of their low cost and the abundant Na resources. This Review provides a comprehensive overview of selected anode materials with high reversible capacities that can increase the energy density of Na‐ion batteries. Moreover, we discuss the reaction and failure mechanisms of those anode materials with a view to suggesting promising strategies for improving their electrochemical performance.     

第一性原理计算在锂离子电池负极材料中的应用

本文综述了第一性原理计算在锂离子电池负极材料中的应用,包括锂离子在负极材料上的吸附和相互作用、结构稳定性、锂离子的扩散、电池反应过程的模拟和实验现象的解释. 第一性原理计算在研究和设计锂离子电池负极材料,特别是其容量、电压、反应过程、扩散、倍率充放电、结够与性能对应关系等方面,已发挥了重要的作用. 随着计算机技术的发展,第一性原理计算将可更深刻地反映负极材料的电化学可逆嵌/脱锂本质.     

锂离子电池锡-金属-碳复合负极材料

石墨作为锂离子电池的负极材料已经使用了很长时间。但由于其嵌锂容量低,已不能满足动力电池快速发展的需求。而锡可以与锂形成合金,有可能取代石墨成为下一代锂离子电池负极材料。但是单纯的金属锡在电池循环过程中发生巨大的体积变化,容易导致电极材料的粉化。而碳材料具有较高的导电性,良好的机械性能和储锂性能。为了充分发挥金属锡和碳材料的优势,锡-碳(Sn-C)复合材料得到了广泛研究。本文详细介绍了无定型碳、石墨(G)、石墨烯(GP)、碳纳米管(CNT)、碳纳米纤维(CNF)等碳材料作为惰性的导电基体与锡形成的二元复合物,阐述了锡与其它金属(M)形成的碳基三元、多元复合物的结构和性能。通过总结近些年对锡碳复合物结构与性能的研究,相信多元复合和多种结构的应用是提高锡-碳复合负极材料的关键。其中,以Sn-Co-C为基础的多元复合负极材料最有可能走向市场应用。     

锂离子电池负极材料非晶态MgSnO3的合成和性能研究

锂离子电池金属氧化物负极材料越来越受到人们的重视.锡基氧化物贮锂材料具有能量密度较高、清洁无污染、原料来源广泛、价格便宜等优点,是金属氧化物类负极材料中极具发展潜力的一种负极材料.因此,近年来人们对这类材料开展了广泛的研究[1～6].     

Solution Synthesis of Porous Silicon Particles as an Anode Material for Lithium Ion Batteries

Nanostructured silicon-based materials with porous structures have recently been found to be impressive anode materials with high capacity and cycling performance for lithium-ion batteries. However, the current methods of preparing porous silicon have generally been confronted with the requirement for multiple steps and complex synthesis. In the present study, porous silicon with high surface area was prepared by using a high yielding and simple reaction in which commercial magnesium powder readily reacts with HSiCl₃ with the help of an amine catalyst under mild conditions. The obtained porous silicon was coated with a nitrogen-doped carbon layer and used as the anode for lithium-ion batteries. The porous Si-carbon nanocomposites exhibited excellent cycling performance with a retained discharge capacity of 1300 mA h g⁻¹ after 200 cycles at 1 A g⁻¹ and a discharge capacity of 750 mA h g⁻¹ at a current density of 2 A g⁻¹ after 250 cycles. Remarkably, the Coulombic efficiency was maintained at nearly 100 % throughout the measurements.     

Ionic Liquid Based Polymer Gel Electrolytes for Use with Germanium Thin Film Anodes in Lithium Ion Batteries

Thermally stable, flexible polymer gel electrolytes with high ionic conductivity are prepared by mixing the ionic liquid 1-butyl-1-methylpyrrolidinium bis(trifluoromethylsulfonyl)imide (C₄mpyrTFSI), LiTFSI and poly(vinylidene difluoride-co-hexafluoropropylene (PVDF-HFP). FT-IR and Raman spectroscopy show that an amorphous film is obtained for high (60 %) C₄mpyrTFSI contents. Thermogravimetric analysis (TGA) confirms that the polymer gels are stable below ∼300 °C in both nitrogen and air environments. Ionic conductivity of 1.9×10⁻³ S cm⁻² at room temperature is achieved for the 60 % ionic liquid loaded gel. Germanium (Ge) anodes maintain a coulombic efficiency above 95 % after 90 cycles in potential cycling tests with the 60 % C₄mpyrTFSI polymer gel.     

锰氧化物/碳氮三维网络结构复合材料的制备及锂电性能

通过硝酸锰和乙醇的水热反应在三聚氰胺泡棉(MF)上生成三氧化二锰颗粒,氮气下高温处理后形成锰氧化物负载碳氮三维网络结构的复合物。碳氮网络结构提高了充放电过程中材料结构的稳定性及导电性,且烧结过程中产生的孔道结构有利于锂离子传输,使得该复合材料作为负极在锂离子电池中表现出优异的充放电性能和循环稳定性。材料的比容量和循环稳定性大大提高,经500℃处理后的MnO/CNnws-500材料在160次循环后仍然保留590 m Ah·g~(-1)的比容量,达到氧化亚锰理论容量755 m Ah·g~(-1)的78%。     

Facile Synthesis of Porous Mn2O3 Nanoplates and Their Electrochemical Behavior as Anode Materials for Lithium Ion Batteries

Porous Mn₂O₃ nanoplates were prepared by a facile polyol solution method combined with a simple post‐annealing process. The porous Mn₂O₃ nanoplates were characterized by XRD, field‐emission SEM, high‐resolution TEM, and N₂ adsorption/desorption isotherm measurements. The formation process for the Mn₂O₃ nanoplates was proposed as a morphology‐conserved transformation strategy. These porous nanoplates exhibited improved electrochemical performance with excellent cycling stability and good rate capability when applied as anode materials in lithium ion batteries.     

Porous Co3O4 Nanosheets with Extraordinarily High Discharge Capacity for Lithium Batteries

Cobalt and battery charge : Porous Co₃O₄ with a hexagonal sheetlike structure has been synthesized through precursor Co(OH)₂ hexagonal nanosheets (see figure). The as‐prepared nanosheets exhibit excellent Li‐battery performance with a good cycle life and high capacity (1450 mAh g^?1).

     

锂离子电池电极材料磷酸氧钒锂的研究进展

介绍了磷酸氧钒锂(α-LiVOPO4、β-LiVOPO4和αⅠ-LiVOPO4)电极材料的结构和电化学性能;综述了现有的LiVOPO4电极材料的合成方法(包括高温固相法,化学还原法,溶胶-凝胶法,溶剂热法,离子交换法等)及其改性研究现状。最后对其未来的发展趋势进行了展望。     

锂离子电池合金负极材料的研究进展

本文综述了锂离子电池合金负极材料的研究现状,对比了各种合金负极材料的制备方法,并指出了合金负极材料目前面临的主要问题及现有的解决方案,最后提出纳米锂合金复合物将是合金负极材料发展的最终出路.