Porous polyurethanes synthesized within high internal phase emulsions

PolyHIPE are highly porous, emulsion‐templated polymers typically synthesized via free‐radical polymerization within a water‐in‐oil (W/O) high internal phase emulsion (HIPE) whose dispersed, aqueous phase occupies more than 74% of the volume. The synthesis of a polyHIPE containing biodegradable polymers is not straightforward because the presence of both an organic phase and an aqueous phase within the HIPE limits the type of polymerization reactions that can be used. This article describes the synthesis of polyHIPE containing biodegradable poly(ε‐caprolactone) (PCL) groups through the step‐growth reaction of a diisocyanate with a flexible PCL triol to form a crosslinked polyurethane. The reaction of the diisocyanate with the water in the HIPE produced urea groups and large bubbles from the generation of CO₂. The polymer walls between these bubbles consisted of a porous, emulsion‐templated structure. Polymerization with an excess of diisocyanate produced a significant enhancement in the amounts of urea and CO₂. The reduction in the flexible PCL content and the enhancement in the rigid urea content produced an increase in wall modulus that was over 20‐fold. The ability to synthesize polyHIPE through such step‐growth reactions is an important advance in the adaptation of polyHIPE for such applications as tissue engineering. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 5806–5814, 2009     

Synthesis and polymerization reactions of cyclic imino ethers. 5: naphthalene unit‐containing poly(ether amide)s

Poly(ether amide)s containing naphthalene unit were prepared either by the polyaddition reaction of aromatic bis(2‐oxazoline)s with the different dihydroxynaphthalenes or by the homopolyaddition of a monomer containing an oxazoline, a hydroxy, and naphthalene moieties. First, polymerization method represents AA + BB mode where 1,4‐phenylene‐2,2′‐bis(2‐oxazoline) (A) and 1,3‐phenylene‐2,2′‐bis(2‐oxazoline) (B) were used as AA monomers and four different dihydroxynaphthalenes 1–4 were used as BB monomers. In the second case, 2‐(6‐hydroxynaphthalene‐2‐yl)‐2‐oxazoline (5) was used as AB‐type monomer in thermally induced polymerizations. The time dependences of polyadditions in bulk as well as in the solution were examined. The reduction of molar mass was observed after the initial fast increase of molar mass. This can be explained by the presence of side and degradation reactions. In both cases, polyadditions resulted in the linear poly(ether amide)s, which were characterized by ¹H and ¹³C NMR spectroscopy. Thermal properties of the prepared polymers were studied by differential scanning calorimetry (DSC) measurements. Comparison of the temperatures of glass transition for polymers prepared in AA + BB mode shows the strong dependence of thermal properties on the structure of the polymers. The values were in the range of 136–171°C. The glass‐transition temperature (T_g) of poly[2‐(6‐hydroxynaphthalene‐2‐yl)‐2‐oxazoline] prepared by AB‐type polyaddition is 183°C, which corresponds to the higher contents of hard aromatic segments in the latter type of polymers compared to the polymers prepared in the AA + BB‐type polyadditions. The described polymers represent novel naphthalene unit‐containing poly(ether amide)s for different applications in material science. Copyright © 2011 John Wiley & Sons, Ltd.     

Synthesis and properties of poly(phenylacetylenes) having two polar groups or one cyclic polar group on the phenyl ring

Phenylacetylene (PA) derivatives having two polar groups (ester, 2a – d ; amide, 4) or one cyclic polar group (imide, 5a – c ) were polymerized using (nbd)Rh⁺[(η⁶‐C₆H₅)B^?(C₆H₅)₃] catalyst to afford high molecular weight polymers (～1 × 10⁶ – 4 × 10⁶). The hydrolysis of ester‐containing poly(PA), poly( 2a) , provided poly(3,4‐dicarboxyPA) [poly ( 3 )], which could not be obtained directly by the polymerization of the corresponding monomer. The solubility properties of the present polymers were different from those of poly(PA) having no polar group; that is, poly( 2a )–poly( 2d ) dissolved in ethyl acetate and poly( 4 ) dissolved in N,N‐dimethylformamide, while poly(PA) was insoluble in such solvents. Ester‐group‐containing polymers [poly( 2a )–poly( 2d )] afforded free‐standing membranes by casting from THF solutions. The membrane of poly( 2a ) showed high carbon dioxide permselectivity against nitrogen (PCO₂/PN₂ = 62). © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 5943–5953, 2006     

Helical polyacetylenes carrying 2,2,6,6‐tetramethyl‐1‐piperidinyloxy and 2,2,5,5‐tetramethyl‐1‐pyrrolidinyloxy moieties: Their synthesis,properties, and function

2,2,6,6‐Tetramethyl‐1‐piperidinyloxy (TEMPO)‐ and 2,2,5,5‐tetramethyl‐1‐pyrrolidinyloxy (PROXYL)‐containing (R)‐1‐methylpropargyl TEMPO‐4‐carboxylate ( 1 ), (R)‐1‐methylpropargyl PROXYL‐3‐carboxylate ( 2 ), (rac)‐1‐methylpropargyl PROXYL‐3‐carboxylate ( 3 ), (S)‐1‐propargylcarbamoylethyl TEMPO‐4‐carboxylate ( 4 ), and (S)‐1‐propargyloxycarbonylethyl TEMPO‐4‐carboxylate ( 5 ) (TEMPO, PROXYL) were polymerized to afford novel polymers containing the TEMPO and PROXYL radicals at high densities. Monomers 1–3 and 5 provided polymers with moderate number‐average molecular weights of 8200–140,900 in 49–97% yields in the presence of (nbd)Rh⁺[η⁶‐C₆H₅B^?(C₆H₅)₃], whereas 4 gave no polymer with this catalyst but gave polymers possessing low M_n (3800–7500) in 56–61% yield with [(nbd)RhCl]₂‐Et₃N. Poly( 1 ), poly( 2 ), and poly( 4 ) took a helical structure with predominantly one‐handed screw sense in THF and CHCl₃ as well as in film state. The helical structure of poly( 1 ) and poly( 2 ) was stable upon heating and addition of MeOH, whereas poly( 4 ) was responsive to heat and solvents. All of the free radical‐containing polymers displayed the reversible charge/discharge processes, whose capacities were in a range of 43.2–112 A h/kg. In particular, the capacities of poly( 2 )–poly( 5 )‐based cells reached about 90–100% of the theoretical values regardless of the secondary structure of the polymer, helix and random. Poly( 1 ), poly( 2 ), and poly( 4 ) taking a helical structure exhibited better capacity tolerance towards the increase of current density than nonhelical poly( 3 ) and poly( 5 ) did. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5431–5445, 2007     

Fluorescence,ion binding,and viscosity properties of poly[2‐ and 4‐vinylpyridine]s in methanol and in sulfuric acid

Fluorescence intensities of poly(2‐vinylpyridine) (P2VP) and poly(4‐vinylpyridine) (P4VP) in H₂SO₄/H₂O solutions were increased with increasing acid concentration. The intensities for P2VP were found to be six times stronger than that of P4VP. These differences were accounted for by the microenvironment of protonated pyridinium group. The ion binding properties of 4‐methylpyridine (4MP), P2VP, and P4VP were investigated in methanol using Tb³⁺ as a fluorescence probe. The increase of fluorescence intensity of Tb³⁺ in [P2VP–Tb³⁺] and [P4VP–Tb³⁺] complexes is due to both the replacement of the inner coordinated methanol molecules and ligand‐to‐metal energy transfer. The model compound 4MP was inefficient from this point of view, and the results were attributed to the polymer cooperative effect. Reduced viscosities of poly(vinylpyridine)s (PVP) in methanol were similar to nonionic polymers; however, when TbCl₃ was added into the solution, the viscosities increased upon dilution. These results also indicated that PVP form complexes with Tb³⁺ in methanol. When diluted, the counterions Cl⁻ are allowed to dissociate and the charged polymer expands. Consequently, the solution's viscosity increases. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 1341–1345, 1999     

Design,synthesis, photophysical,and electrochemical properties of DCM‐based conjugated polymers for light‐emitting devices

A series of conjugated hyperbranched polymers, hyperbranched copolymers, and linear polymers containing 2‐pyran‐4‐ylidenemalononitrile (acceptor) and triphenylamine/fluorene (donor) units were synthesized and characterized by FTIR, ¹H NMR, thermogravimetric analyses, differential scanning calorimetry, gel permeation chromatography, UV–visible, photoluminescence, and cyclic voltammetry measurements. All the polymers show red‐light emission in the range of 566–656 nm both in solution and in solid state. The quantum efficiency of the polymers was in the range of 56–82%. Among the six polymers synthesized, only polymers containing fluorene units show T_g and polymers based on triphenylamine not exhibit T_g. The band gap of these polymers were found to be reasonably low; hyperbranched copolymer containing fluorene unit shows lowest band gap of 2.18 eV due to the stabilization of LUMO energy level by the electron withdrawing ? CN groups. The thermal and solubility behavior of the polymers were found to be good. All the EL spectra of the devices (indium‐tin oxide/poly(3,4‐ethylenedioxythiophene):poly(styrenesulfonate)/polymer/2,9‐dimethyl‐4,7‐diphenyl‐1,10‐phenanthroline/tris(8‐hydroxyquinoline)aluminum)/LiF/Al) show red‐light emission, and the device fabricated with P3 and P4 shows maximum luminance and luminous efficiency of 4104 cd m^?2 and 0.55 cd Å^?1 and 3696 cd m^?2 and 0.47 cd Å^?1, respectively, indicates that they had the best carrier balance. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Uptake of Divalent Metal Ions (Cu2+, Zn2+ and Cd2+) by Polysiloxane Immobilized Monoamine Ligand System

ABSTRACT

Porous solid siloxane polymers carrying a monoamine functional group of formula P-(CH₂)₃NH₂ (Where P- represents a siloxane framework silica like ) has been prepared by polycondensation of Si(OEt)₄ and (MeO)₃Si(CH₂)₃-NH₂. Treatment of aqueous solutions of divalent metal ions with the polysiloxane monoamine ligand system demonstrates that this material has high potential for preconcentration of metal ions (Cu²⁺, Zn²⁺ and Cd²⁺). The tendency of these divalent metal ions to chemisorb by the monoamine ligand system at the optimum conditions increases in the order: Cd²⁺ <Zn²⁺ <Cu²⁺. The optimum pH is 5.5 for copper and 6-7 for zinc and cadmium. The ammonia/ ammonium chloride buffer solution gave maximum uptake for all metal ions. It is also found that the uptake of copper ions is concentration dependent and is independent of the presence of other competing ions. The monoamine ligand system suffers from leaching of ligand containing groups upon treatment with acidic solutions. The highest leaching occurs at low pH.     

Aryl acrylate based high‐internal‐phase emulsions as precursors for reactive monolithic polymer supports

Water‐in‐oil high‐internal‐phase emulsions (HIPEs), containing 4‐nitrophenyl acrylate and 2,4,6‐trichlorophenyl acrylate as reactive monomers, were prepared and polymerized, and highly porous monolithic materials resulted. The novel materials were studied by combustion analysis, Fourier transform infrared spectroscopy scanning electron microscopy, mercury porosimetry, and N₂ adsorption/desorption analysis. With both esters, cellular macroporous monolithic polymers were obtained; the use of 4‐nitrophenyl acrylate resulted in a cellular material with void diameters between 3 and 7 μm and approximately 3‐μm interconnects, whereas the use of 2,4,6‐trichlorophenyl acrylate yielded a foam with void diameters between 2 and 5 μm, most interconnects being around 1 μm. The resulting monoliths proved to be very reactive toward nucleophiles, and possibilities of functionalizing the novel polymer supports were demonstrated via reactions with amines bearing additional functional groups and via the synthesis of an acid chloride derivative. Tris(hydroxymethyl)aminomethane and tris(2‐aminoethyl)amine derivatives were obtained. The hydrolysis of 4‐nitrophenylacrylate removed the nitrophenyl group, yielding a monolithic acrylic acid polymer. Furthermore, functionalization to immobilized acid chloride was performed very efficiently, with more than 95% of the acid groups reacting. The measurement of the nitrogen content in 4‐nitrophenyl acrylate poly(HIPE)s after various times of hydrolysis showed the influence of the total pore volume of the monolithic polymers on the velocity of the reaction, which was faster with the more porous polymer. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 296–303, 2005     

Synthesis and absorption/emission properties of novel poly(silylenearylenevinylene)s

Polymerization of p-(dimethylsilyl)phenylacetylene in toluene at 25 and 80 °C with RhI(PPh₃)₃ catalyst afforded highly regio- and stereoregular poly(dimethylsilylene-1,4-phenylenevinylene)s [cis- and trans-poly( 1a )s] containing 98% cis- and 99% trans-vinylene moieties, respectively. The trans-type polymers exhibited redshifts and hyperchromic effects in the ultraviolet–visible spectrum as compared with the cis-type counterparts. Photoirradiation of cis- and trans-poly( 1a )s gave cis-rich mixtures at equilibrium states. The trans and cis polymers exhibited different emission properties, for example—trans polymer, emissn λ_max = 400 nm, quantum yield: 3.4 × 10⁻³ and cis polymer, emissn λ_max = 380 nm, quantum yield: 1.5 × 10⁻³. Besides poly( 1a ), poly(dimethylsilylenearylenevinylene)s containing biphenylene and phenylenesilylenephenylene units [poly( 3 )] were prepared. The extent of conjugation in these polymers decreased in the orders of biphenylene > phenylene > phenylenesilylenephenylene as well as trans-vinylene > cis-vinylene. The quantum yield of the trans-rich polymer with biphenylene moiety was fairly large and 0.15. Polyaddition of 1,4-bis(dimethylsilyl)benzene and three types of diethynylarenes (4,4′-diethynylbiphenyl, 2,7-diethynylfluorene, and 2,6-diethynylnaphthalene) catalyzed by RhI(PPh₃)₃ provided novel regio- and stereoregular polymers [poly( 6 )]. These polymers displayed blue light emission with high quantum yields (4–81%). © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 3615–3624, 2003     

Seventeen‐Coordinate Actinide Helium Complexes

The geometries and electronic structures of molecular ions featuring He atoms complexed to actinide cations are explored computationally using density functional and coupled cluster theories. A new record coordination number is established, as AcHe₁₇³⁺, ThHe₁₇⁴⁺, and PaHe₁₇⁴⁺ are all found to be true geometric minima, with the He atoms clearly located in the first shell around the actinide. Analysis of AcHe_n ³⁺ (n =1–17) using the quantum theory of atoms in molecules (QTAIM) confirms these systems as having closed shell, charge‐induced dipole bonding. Excellent correlations (R ²>0.95) are found between QTAIM metrics (bond critical point electron densities and delocalization indices) and the average Ac−He distances, and also with the incremental He binding energies.     

Stereoregularity of poly(2-vinylpyridine) and poly-(4-vinylpyridine)

In order to determine the stereoregularity of poly(4-vinylpyridine), 4-vinylpyridine-β,β-d₂ was synthesized from 4-acetylpyridine. The ¹H-NMR spectra of the deuterated and nondeuterated polymers were measured and analyzed. From the ¹H-NMR spectra of poly(4-vinylpyridine-β,β-d₂), triad tacticity can be obtained, while the ¹H-NMR spectra of nondeuterated poly(4-vinylpyridine) give the fraction of isotactic triad. The ¹³C-NMR spectra of poly(4-vinylpyridine) were also observed, and the spectra of C₄ carbon of polymers were assigned by the pentad tacticities. The fraction of isotactic triad of poly(2-vinylpyridine) and poly(4-vinylpyridine) obtained under various polymerization conditions were determined. The radical polymerization and anionic polymerizations with phenylmagnesium bromide and n-butyllithium as catalysts of 4-vinylpyridine gave atactic polymers.     

Trimethylsilyl-group containing polyphenylacetylenes for oxygen and ethanol permselective membranes

Phenylacetylenes having one or two trimethylsilyl groups at their benzene ring were synthesized, and polymerized by [Rh(cyclooctadiene) (PPh₃)₂]PF₆, [Rh(norbornadiene)Cl]₂, or WCl₆ to afford high molecular-weight polymers in high yields. These poly(phenylacetylene)s were soluble in many kinds of solvents and were fabricated to tough membranes by the solvent casting method. The oxygen permselectivities of these membranes were very good. The oxygen permeability coefficients (P_o2) and oxygen separation factors (α = P_o2/P_N2) of poly[2,4-(o,p)-bis(trimethylsilyl)phenylacetylene] [poly ( o-1-p-1 )] and poly[(4(p)-trimethylsilyl)phenylacetylene] [poly( p-1 )] membranes were 4.73 × 10^?8 cc(STP) cm/cm² s cmHg and 2.65, and 1.52 × 10^?8 cc(STP) cm/cm² s cmHg and 3.39, respectively. In the case of poly( o-1-p-1 ), P_o2 was comparable to that of polydimethylsiloxane (PDMS) and α was higher than that of PDMS. However, the P_o2 value reduced to 48% of its initial value in about 1 year. In the case of poly( p-1 ), the P_o2 value did not change in about 1 year. Ethanol permeated preferentially through these membranes (α^EtOH > 1) in pervaporation of aqueous ethanol solution, whereas poly(phenylacetylene) [poly( PhA )] showed water permselectivity (α^EtOH < 1). These favorable effects of trimethylsilyl groups on the oxygen and ethanol permselectivities were discussed on the basis of comparison with those of poly( PhA ), other poly(substituted phenyl-acetylene)s, and trimethylsilyl-group containing polystyrenes. © 1994 John Wiley & Sons, Inc.     

Hexaphyrin(1.0.1.0.0.0). A new colorimetric actinide sensor

Hexaphyrin(1.0.1.0.0.0) (isoamethyrin) undergoes a significant color change in the presence of UO₂²⁺, PuO₂²⁺, and NpO₂²⁺. The complexation of the first of these dioxo actinide cations was studied in semi-quantitative fashion in 1:1 MeOH-CH₂Cl₂. Under these conditions, the detection limit for UO₂²⁺ was found to be ca. 5.8 ppm by naked eye monitoring and <28 ppb by UV-vis spectroscopy. Isoamethyrin does not undergo a color change in the presence of most transition metals or when exposed to Gd(III). Isoamethyrin thus constitutes an attractive alternative to 2,2′(1,8-dihydroxy-3,6-disulfonaphthylene-2,7-bisazo)-bisbenzenarsonic acid (AzIII) and 2-(5-bromo-2-pyridylazo)-5-(diethylamino)phenol (BrPADAP), systems currently used as actinide cation sensors.     

Determination of the complex formation constants for some water-soluble polymers with trivalent metal ions by differential pulse polarography

The formation of metal complexes between water-soluble polymers, poly(vinyl alcohol) [PVA], poly(N-vinylpyrrolidone) [PVP], poly(acrylamide) [PAAm] and poly(ethylene oxide) [PEO] with trivalent metal ions, Fe³⁺, Cr³⁺, and V³⁺ were studied by using differential pulse polarography (DPP). The general experimental observation is the shift of totally reversible reduction peaks (M³⁺+Hg+e^–M²⁺+Hg) towards more negative potentials when the complexing water-soluble polymers are added to the solution of trivalent metal ions. The negative shift in potential permitted the determination of complex formation constants (K_f) between trivalent metal ions and water soluble polymers. The complex formation constants for Fe³⁺, Cr³⁺, and V³⁺ ions with these polymers increased in the order of V³⁺>Cr³⁺>Fe³⁺.     

Intermolecular association of polymers through functional end-groups: Sulphate and sulphonate end-groups

Intermolecular association of some polystyrene and poly(methyl methacrylate) (PMMA) samples bearing sulphate and/or sulphonate end-groups prepared by using the redox initiator systems K₂S₂O₈ + NaHSO₃, Na₂SO₃ + Cu²⁺, NaHSO₃ + O₂ has been studied for dilute solutions in toluene, chloroform, o-dichlorobenzene, tetrahydrofuran (THF) and ethyl acetate respectively by viscometry and in toluene and THF by osmometry. Significant association of the polymers occurs in toluene, chloroform and o-dichlorobenzene in the dilute solutions used in this work. However, association is significantly reduced in chloroform containing 2% ethanol or in toluene containing 2% methanol. Tetrahydrofuran appears to be the preferred solvent for determining the molecular weights of such polymers, since association is insignificant in this solvent.     

Seventeen-Coordinate Actinide Helium Complexes

The geometries and electronic structures of molecular ions featuring He atoms complexed to actinide cations are explored computationally using density functional and coupled cluster theories. A new record coordination number is established, as AcHe₁₇³⁺, ThHe₁₇⁴⁺, and PaHe₁₇⁴⁺ are all found to be true geometric minima, with the He atoms clearly located in the first shell around the actinide. Analysis of AcHe_n³⁺ (n=1–17) using the quantum theory of atoms in molecules (QTAIM) confirms these systems as having closed shell, charge-induced dipole bonding. Excellent correlations (R²>0.95) are found between QTAIM metrics (bond critical point electron densities and delocalization indices) and the average Ac−He distances, and also with the incremental He binding energies.     

Synthesis and characterization of calcium containing poly(urethane-ether)s

Calcium containing poly(urethane-ether)s (PUEs) were synthesized by the reaction of hexamethylene diisocyanate or toluylene 2,4-diisocyanate (HMDI or TDI) with a mixture of calcium salt of mono(hydroxybutyl)phthalate [Ca(HBP)₂] and polyethylene glycol (PEG₂₀₀ or PEG₄₀₀). A series of calcium containing PUEs having different composition were synthesized by taking the mole ratio of Ca(HBP)₂:PEG₂₀₀ or PEG₄₀₀:diisocyanate (HMDI or TDI) as 3:1:4, 2:2:4 and 1:3:4 to study the effect of calcium content on the properties of the copolymer. The structure of the polymers were confirmed by IR, ¹H-NMR, ¹³C-NMR, and solid state ¹³C-CP-MAS NMR. The polymers were soluble in dimethyl sulfoxide and dimethyl formamide. The initial decomposition temperature of the polymers decreases with increase in calcium content. The T_g value of PUEs increases with increase in calcium content and decreases with increase in soft segment content and length. A single T_g value is observed for the calcium containing PUEs based on PEG₂₀₀ shows the presence of homogeneous phase. However, two T_g values for the PUEs based on PEG₄₀₀ for various composition of Ca(HBP)₂, PEG₄₀₀ and diisocyanate (HMDI or TDI) shows the presence of heterogeneous phase. The viscosity of the calcium containing PUEs increases with increase in the soft segment content as well as its length and decreases with increase in calcium content. X-ray diffraction patterns of the polymers show that the HMDI based polymers are partially crystalline and TDI based polymers are amorphous in nature. The dynamic mechanical analysis of the calcium containing PUEs based on HMDI shows that at any given temperature modulus (g^′ and g^″) increases with increase in the ionic content in the polymers.     

Hybrid azobenzene-doped nanoporous polymers derived from cubic octavinylsilsesquioxane

A series of novel hybrid porous polymers (HPPs) with high specific surface areas were first prepared by one-step ternary cross-linking copolymerization of octavinylsilsesquioxane (OVS), 1,3,5-tribromobenzene, and 4,4´-dibromoazobenzene via the Heck reaction. The porosities and the CO₂ uptake capacities of resulting azobenzene-doped porous polymers could be tuned by modulating the molar percentage of the azo units. At 273 K and 101 kPa, the sample with the specific surface area of ~700 m² g^–1 (data of Brunauer—Emmett—Teller (BET) surface area analysis) showed the highest CO₂ uptake of 5.45 wt.% (1.20 mmol g^–1) among the fabricated HPPs.

     

High Ammonia Uptake of a Metal–Organic Framework Adsorbent in a Wide Pressure Range

Although numerous porous adsorbents have been investigated for NH₃ capture applications, these materials often exhibit insufficient NH₃ uptake, low NH₃ affinity at the ppm level, and poor chemical stability against wet NH₃ conditions. The NH₃ capture properties of M₂(dobpdc) complexes (M=Mg²⁺, Mn²⁺, Co²⁺, Ni²⁺, and Zn²⁺; dobpdc⁴⁻=4,4-dioxidobiphenyl-3,3-dicarboxylate) that contain open metal sites is presented. The NH₃ uptake of Mg₂(dobpdc) at 298 K was 23.9 mmol g⁻¹ at 1 bar and 8.25 mmol g⁻¹ at 570 ppm, which are record high capacities at both pressures among existing porous adsorbents. The structural stability of Mg₂(dobpdc) upon exposure to wet NH₃ was superior to that of the other M₂(dobpdc) and the frameworks tested. Overall, these results demonstrate that Mg₂(dobpdc) is a recyclable compound that exhibits significant NH₃ affinity and capacity, making it a promising candidate for real-world NH₃-capture applications.     

New aromatic benzazole polymers. I. Benzobisthiazole and benzobisoxazole polymers with main-chain triarylamino units

Thermally stable, nonrigid-rod poly(benzobisthiazoles), (R)TPA-PBZT , where R = H, Me, NMe₂, and OH, and poly(benzobisoxazoles), (R)TPA-PBO , where R = Me, NMe₂ containing electron-rich triarylamine groups with various para-substituents (Rs) on the pendent phenyl ring, were synthesized from either 2,5-diamino-1,4-benzenedithiol dihydrochloride or 2,4-diamino-1,5-benzenediol dihydrochloride and the respective triarylamine-based dinitrile or diacid monomer in polyphosphoric acid. Whereas (R)TPA-PBZT polymers were obtained in moderate molecular weights, analogous (R)TPA-PBO polymers were only prepared in low molecular weights. No lyotropic behaviors, characteristic of the unmodified rigid-rod benzazole polymers, as evidenced by the absence of either stir opalescence or birefringence under crosspolarizers, were observed for these homopolymers at about 10 wt % polymer concentration. Among these polymers, only (Me)TPA-PBZT and (NMe₂)TPA-PBZT formed cast films with good mechanical integrity. In their pristine state, their film conductivity values were in the range of 10⁻¹⁰–10⁻⁹ S/cm at room temperature. Upon exposure to iodine vapor, their conductivities were increased to the maximal values of 5.0 × 10⁻⁵ S/cm ( (Me)TPA-PBZT ) and 4.1 × 10⁻⁴ S/cm ( (NMe₂)TPA-PBZT ). © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35 : 1909–1924, 1997