Insight into the Multistate Emissive N,P-doped Carbon Nano-Onions: Emerging Visible-Light Absorption for Photocatalysis

Carbon dots (CDs) have become one of the most emerging materials as an alternative solar light-induced photocatalyst in contrast to traditional metal-based systems. However, one of the major challenges is the lack of visible light absorption. Herein, we have fabricated unique N, P-co-doped CDs with a self-assembled onion-like layered structure by using a bottom-up facile synthesis technique from chitosan gel and phosphoric acid as molecular precursors. This typical layered structure of N, P-co-doped carbon nano onions (N, P-CNOs), with an average size of 25–50 nm, displays an enhanced visible light absorption. Detailed structural and elemental characterizations confirm the extensive aromatic domain with P-containing surface functionalities, while electrochemical study clarifies the lowering of band gaps as well as the creation of new electronic states in comparison to the pristine N-CDs. Furthermore, the intrinsic structural features are correlated with the underpinning photophysical processes by steady-state and time-resolved fluorescence spectroscopy. In addition, steady-state polarized emission and thermo-responsive PL properties have been carried out to unveil further the structure-property correlation of N, P-CNOs, and their comparative study with pristine N-CDs at the different excitation wavelengths. Finally, N, P-CNOs exhibit efficient visible-light-induced photocatalysis, and the detailed mechanistic study is carried out by trapping the photogenerated species in an aqueous medium. The prepared N, P-CNOs displayed an excellent visible-light photocatalytic performance over MB dye with a degradation efficiency of 75.8% within 120 min along with a degradation rate constant of ∼0.0109 min⁻¹. It is concluded that the easy to synthesize and low-cost N, P-CNOs with a unique morphology hold great potential for application in visible-light photocatalysis.     

Dramatic Fluorescence Enhancement of Bare Carbon Dots through Facile Reduction Chemistry

Reduction of bare carbon dots (CDs) in aqueous NaBH₄ solution is a facile and effective approach to enhance their fluorescence without any surface coverage. CDs are treated with dilute aqueous NaBH₄ solutions, enhancing their quantum yields (QYs) successfully from 1.6 % to 16 % which is comparable to semiconductive QDs in aqueous environments. If pristine CDs are treated hydrothermally prior to reduction by NaBH₄, QYs reach 40.5 %. This value is among the highest QYs reported for bare CDs in the literature. The approach to enhance fluorescence through chemical reduction is generally applicable to other kinds of CDs synthesized by various methods. Alteration of the chemical structure of the CDs by NaBH₄‐reduction is analyzed by ¹³C NMR, X‐ray photoelectron spectroscopy (XPS) and Raman spectroscopy, which demonstrate that the carbonyl group content is decreased after NaBH₄‐reduction, whereas the number of sp³‐type carbon defects is increased. The valence‐band maxima (VBM) near the surface related to the surface energy bands of the CDs are estimated by XPS. VBM data show a semiconducting layer on the surface of the CDs, and the VBM of the CDs decrease with increasing NaBH₄‐reduction time. The layered graphite structures in the cores of the CDs are clearly observed by transmission electron microscopy (TEM). CDs could perhaps be regarded as semiconductive surface defect layers formed by chemical erosion over conductive graphite cores. Chemical reduction by NaBH₄ changes the surface‐energy bands of the CDs, thus, enhances their fluorescence. The fluorescence properties of aqueous NaBH₄‐reduced CDs are also studied for possible biological applications.     

Insight into the Excitation-Dependent Fluorescence of Carbon Dots

High quantum yield, photoluminescence tunability, and sensitivity to the environment are a few distinct trademarks that make carbon nanodots (CDs) interesting for fundamental research, with potential to replace the prevalent inorganic semiconductor quantum dots. Currently, application and fundamental understanding of CDs are constrained because it is difficult to make a quantitative comparison among different types of CDs simply because their photoluminescence properties are directly linked to their size distribution, the surface functionalization, the carbon core structures (graphitic or amorphous) and the number of defects. Herein, we report a facile one-step synthesis of mono-dispersed and highly fluorescent nanometre size CDs from a ‘family’ of glucose-based sugars. These CDs are stable in aqueous solutions with photoluminescence in the visible range. Our results show several common features in the family of CDs synthesized in that the fluorescence, in the visible region, is due to a weak absorption in the 300–400 nm from a heterogeneous population of fluorophores. Fluorescence quenching experiments suggest the existence of not only surface-exposed fluorophores but more importantly solvent inaccessible fluorophores present within the core of CDs. Interestingly, time-resolved fluorescence anisotropy experiments directly suggest that a fast exchange of excitation energy occurs that results in a homo-FRET based depolarization within 150 ps of excitation.     

CuO Quantum‐Dot‐Sensitized Mesoporous ZnO for Visible‐Light Photocatalysis

How to extend ultraviolet photocatalysts to the visible‐light region is a key challenge for solar‐driven photocatalysis. Herein, we show that ultraviolet ZnO photocatalysts can present high visible‐light photocatalytic activity when combined with CuO quantum dots (QDs; <3 nm). Theoretical analysis demonstrates that the quantum size effect plays a key role in the photoactivity of the CuO/ZnO composite. For CuO QDs smaller than 3 nm, the separated charges could transfer from CuO QDs to the conduction bands of ZnO due to quantum splitting of the CuO energy level and phonon compensation for the difference in the conduction band minimum of CuO and ZnO; however, this process would not occur with the disappearance of the quantum size effect. Further structural analysis demonstrates that interfacial charge separation and transfer between ZnO and CuO dominate the photocatalytic processes instead of a single CuO or ZnO surface. Compared with ZnO? noble metal structures (e.g., ZnO? Ag or ZnO? Au), these ZnO? CuO QD composites present wider absorption bands, higher visible photocatalytic efficiencies, and lower costs.     

Cu–N Dopants Boost Electron Transfer and Photooxidation Reactions of Carbon Dots

The broadband light‐absorption ability of carbon dots (CDs) has inspired their application in photocatalysis, however this has been impeded by poor electron transfer inside the CDs. Herein, we report the preparation of Cu–N‐doped CDs (Cu‐CDs) and investigate both the doping‐promoted electron transfer and the performance of the CDs in photooxidation reactions. The Cu–N doping was achieved through a one‐step pyrolytic synthesis of CDs with Na₂[Cu(EDTA)] as precursor. As confirmed by ESR, FTIR, and X‐ray photoelectron spectroscopies, the Cu species chelates with the carbon matrix through Cu–N complexes. As a result of the Cu–N doping, the electron‐accepting and ‐donating abilities were enhanced 2.5 and 1.5 times, and the electric conductivity was also increased to 171.8 μs cm^?1. As a result of these enhanced properties, the photocatalytic efficiency of CDs in the photooxidation reaction of 1,4‐dihydro‐2,6‐dimethylpyridine‐3,5‐dicarboxylate is improved 3.5‐fold after CD doping.     

Rapid and Large‐Scale Production of Multi‐Fluorescence Carbon Dots by a Magnetic Hyperthermia Method

The intrinsic low yield of carbon dots (CDs) is a barrier that limits practical application. Now, a magnetic hyperthermia (MHT) method is used to synthesize fluorescent CDs on a large scale (up to 85 g) in one hour (yield ca. 60 %). The reaction process is intensified by MHT since the efficient heating system enhances the energy transfer. CDs with blue, green, and yellow luminescence are synthesized by using carbamide and citrate with three different cations (Zn²⁺, Na⁺, K⁺), respectively. The CDs exhibit bright fluorescence under UV light and show excellent monodispersity and solubility in water. The alternation of photoluminescence (PL) emissions of these CDs is probably due to the difference in particle sizes and surface state. A bar coating technique is used to construct large‐area emissive polymer/CDs films. CDs can insert themselves into the polymer chains by hydrogen bonding and electrostatic interactions. Wound healing efficiency can be enhanced by the Zn‐CDs/PCL nanofibrous scaffold.     

Rapid and Large-Scale Production of Multi-Fluorescence Carbon Dots by a Magnetic Hyperthermia Method

The intrinsic low yield of carbon dots (CDs) is a barrier that limits practical application. Now, a magnetic hyperthermia (MHT) method is used to synthesize fluorescent CDs on a large scale (up to 85 g) in one hour (yield ca. 60 %). The reaction process is intensified by MHT since the efficient heating system enhances the energy transfer. CDs with blue, green, and yellow luminescence are synthesized by using carbamide and citrate with three different cations (Zn²⁺, Na⁺, K⁺), respectively. The CDs exhibit bright fluorescence under UV light and show excellent monodispersity and solubility in water. The alternation of photoluminescence (PL) emissions of these CDs is probably due to the difference in particle sizes and surface state. A bar coating technique is used to construct large-area emissive polymer/CDs films. CDs can insert themselves into the polymer chains by hydrogen bonding and electrostatic interactions. Wound healing efficiency can be enhanced by the Zn-CDs/PCL nanofibrous scaffold.     

In-situ polymerization for PPy/g-C3N4 composites with enhanced visible light photocatalytic performance

Polypyrrole-modified graphitic carbon nitride composites (PPy/g-C₃N₄) are fabricated using an in-situ polymerization method to improve the visible light photocatalytic activity of g-C₃N₄. The PPy/g-C₃N₄ is applied to the photocatalytic degradation of methylene blue (MB) under visible light irradiation. Various characterization techniques are employed to investigate the relationship between the structural properties and photoactivities of the as-prepared composites. Results show that the specific surface area of the PPy/g-C₃N₄ composites increases upon assembly of the amorphous PPy nanoparticles on the g-C₃N₄ surface. Owing to the strong conductivity, the PPy can be used as a transition channel for electrons to move onto the g-C₃N₄ surface, thus inhibiting the recombination of photogenerated carriers of g-C₃N₄ and improving the photocatalytic performance. The elevated light adsorption of PPy/g-C₃N₄ composites is attributed to the strong absorption coefficient of PPy. The composite containing 0.75 wt% PPy exhibits a photocatalytic efficiency that is 3 times higher than that of g-C₃N₄ in 2 h. Moreover, the degradation kinetics follow a pseudo-first-order model. A detailed photocatalytic mechanism is proposed with ·OH and ·O₂^? radicals as the main reactive species. The present work provides new insights into the mechanistic understanding of PPy in PPy/g-C₃N₄ composites for environmental applications.     

Plasmon-resonance-enhanced visible-light photocatalytic activity of Ag quantum dots/TiO2 microspheres for methyl orange degradation

We successfully prepared Ag quantum dots modified TiO₂ microspheres by facile solvothermal and calcination method. The as-prepared Ag quantum dots/TiO₂ microspheres were characterized by scanning electron microscope, transmission electron microscope, X-ray diffraction, X-ray photoelectron spectroscopy and UV-vis diffuse reflectance spectroscopy. The Ag quantum dots/TiO₂ photocatalyst showed excellent visible light absorption and efficient photocatalytic activity for methyl orange degradation. And the sample with the molar ratio of 0.05 (Ag to Ti) showed the best visible light photocatalytic activity for methyl orange degradation, mainly because of the surface plasmon resonance (SPR) effects of Ag quantum dots to generate electron and hole pairs for enhanced visible light photocatalysis. Finally, possible visible light photocatalytic mechanism of Ag quantum dots/TiO₂ microspheres for methyl orange degradation was proposed in detail.     

Hydrothermal synthesis and characterization of In<Superscript>3+</Superscript> modified BiVO<Subscript>4</Subscript> nanoparticles with enhanced photocatalytic activity

In³⁺-doped BiVO₄ nanoparticles with enhanced visible light activity have been successfully synthesized by a hydrothermal method. The synthesized materials were characterized by X-ray diffraction, Raman, X-ray photoelectron spectroscopy, scanning electron microscopy, BET surface areas analysis, and ultraviolet–visible diffuse reflectance spectra. In comparison with pure BiVO₄, the In³⁺-doped BiVO₄ displayed greater photocatalytic activity in the degradation of methyl blue under visible light illumination. All samples possessed a single monoclinic structure. The introduction of In ions resulted in structural distortion and the decreased band gap energy, producing more electrons and holes for photocatalytic reaction. In the meantime, the doping In ions entails a red shift in the absorption edge and an increase in the intensity of light absorption. The best photocatalytic performance was obtained with the BiVO₄ sample containing 5.0 mol% In ions.     

Carbon Quantum Dot Implanted Graphite Carbon Nitride Nanotubes: Excellent Charge Separation and Enhanced Photocatalytic Hydrogen Evolution

Graphite carbon nitride (g‐C₃N₄) is a promising candidate for photocatalytic hydrogen production, but only shows moderate activity owing to sluggish photocarrier transfer and insufficient light absorption. Herein, carbon quantum dots (CQDs) implanted in the surface plane of g‐C₃N₄ nanotubes were synthesized by thermal polymerization of freeze‐dried urea and CQDs precursor. The CQD‐implanted g‐C₃N₄ nanotubes (CCTs) could simultaneously facilitate photoelectron transport and suppress charge recombination through their specially coupled heterogeneous interface. The electronic structure and morphology were optimized in the CCTs, contributing to greater visible light absorption and a weakened barrier of the photocarrier transfer. As a result, the CCTs exhibited efficient photocatalytic performance under light irradiation with a high H₂ production rate of 3538.3 μmol g^?1 h^?1 and a notable quantum yield of 10.94 % at 420 nm.     

Au/BiOBr/石墨烯复合物的制备及其苯酚降解光催化性能

采用水热法和多巴胺还原法制备了Bi OBr、Bi OBr/石墨烯和Au/Bi OBr/石墨烯光催化剂,并利用扫描电镜(SEM)、透射电镜(TEM)、X射线衍射(XRD)、光致发光光谱(PL)和紫外-可见漫反射光谱(UV-vis DRS)等方法表征其形貌、相结构、光谱吸收性质以及组成结构。在可见光照射下,通过对水相中苯酚的降解,考察了Au/Bi OBr/石墨烯复合光催化剂活性。结果表明,由于量子效率的提高、带隙能的降低(2.25 e V)以及Au表面等离子体共振,复合光催化剂表现出比纯Bi OBr更高的光催化活性,Au/Bi OBr/石墨烯复合物在180 min内对苯酚降解率可达到64%。     

Synthesis of Fluorescent Carbon Dots and Their Application in Ascorbic Acid Detection

Water-soluble fluorescent carbon dots (CDs) were synthesized by a hydrothermal method using citric acid as the carbon source and ethylenediamine as the nitrogen source. The repeated and scale-up synthetic experiments were carried out to explore the feasibility of macroscopic preparation of CDs. The CDs/Fe³⁺ composite was prepared by the interaction of the CDs solution and Fe³⁺ solution. The optical properties, pH dependence and stability behavior of CDs or the CDs/Fe³⁺ composite were studied by ultraviolet spectroscopy and fluorescence spectroscopy. Following the principles of fluorescence quenching after the addition of Fe³⁺ and then the fluorescence recovery after the addition of asorbic acid, the fluorescence intensity of the carbon dots was measured at λex = 360 nm, λem = 460 nm. The content of ascorbic acid was calculated by quantitative analysis of the changing fluorescence intensity. The CDs/Fe³⁺ composite was applied to the determination of different active molecules, and it was found that the composite had specific recognition of ascorbic acid and showed an excellent linear relationship in 5.0–350.0 μmol·L⁻¹. Moreover, the detection limit was 3.11 μmol·L⁻¹. Satisfactory results were achieved when the method was applied to the ascorbic acid determination in jujube fruit. The fluorescent carbon dots composites prepared in this study may have broad application prospects in a rapid, sensitive and trace determination of ascorbic acid content during food processing.     

On the Origin of the Visible‐Light Activity of Titanium Dioxide Doped with Carbonate Species

Plane‐wave‐based pseudopotential density functional theory (DFT) calculations are used to elucidate the origin of the high photocatalytic efficiency of carbonate‐doped TiO₂. Two geometrically possible doping positions are considered, including interstitial and substitutional carbon atoms on Ti sites. From the optical absorption properties calculations, we believe that the formation of carbonates after doping with interstitial carbon atoms is crucial, whereas the contribution from the cationic doping on Ti sites is negligible. The carbonate species doped TiO₂ exhibits excellent absorption in the visible‐light region of 400–800 nm, in good agreement with experimental observations. Electronic structure analysis shows that the carbonate species introduce an impurity state from Ti 3d below the conduction band. Excitations from the impurity state to the conduction band may be responsible for the high visible‐light activity of the carbon doped TiO₂ materials.     

C-I共掺杂多孔g-C3N4光催化分解水制氢

氢气是一种可替代传统燃料的理想清洁能源,利用光催化技术分解水制氢是制取氢气的有效途径之一.无机半导体光催化材料具有较高的活性和稳定性,且原料丰富,易加工改性.目前针对光催化技术的应用,大量的研究工作都集中在开发可见光响应光催化剂,以提高对可见光的利用率.同时,非金属聚合物半导体因其特殊的光电性质,在光催化应用研究中越来越受到关注,如庚嗪基微孔聚合物(HMP)和共价三嗪基骨架(CTF).石墨相碳化氮(g-C3N4)是一种典型非金属二维聚合物半导体,被认为是一种非常有价值的光催化材料.然而,其较低的光生电子的传输效率限制了其实际应用,因此诸多研究对g-C3N4的物理化学结构进行优化,如半导体耦合、共聚合、纳米结构设计和掺杂.非金属掺杂是一种有效的方法,由于原子电负性差异引起的电荷分离可有效改善载流子传输效率,且保持半导体的非金属性质.通过O,B,P和S等掺杂可以扩大可见光响应范围,并调节能带位置以改善光催化活性.除了常见的单一非金属掺杂,金属和非金属元素或多非金属元素共掺杂的办法同样可提高g-C3N4的光催化性能.本工作通过两步法对双氰胺、尿素和碘化1-乙基-3-甲基咪唑的混合物直接热聚合,合成C-I共掺杂的多孔g-C3N4,其在可见光照射下表现出较高的产氢活性和稳定性.采用X射线衍射(XRD)、X射线光电子能谱(XPS)、荧光光谱(PL)和电化学实验等方法对多孔掺杂g-C3N4结构进行详细表征和分析.在助催化剂Pt和电子牺牲剂(三乙醇胺)存在的条件下,采用可见光(>400 nm)照射分解水产氢的方法评价其光催化活性.结果表明,后热处理和碘离子液掺杂对g-C3N4材料的结构和性能具有较大影响.C-I共掺杂和后热处理使催化剂产物颗粒尺寸减小,形成多孔片层状紧密堆积,比表面积和孔隙率显著增加,吸收带边发生蓝移.后热处理使样品层间距减小,聚合度增加,有利于电荷传输,C-I共掺杂后出现更多的缺陷,但没有改变其层状堆积的特性.XPS结果表明,样品中碘元素以I-和I5+的形式存在,改性后催化剂C/N比明显增加,sp2芳环N含量增加,表面氨基含量降低,表明后热处理和C-I共掺杂没有改变多孔g-C3N4的基本骨架,共轭结构更加完善.PL和光电流结果表明,改性后样品的PL强度均显著降低,并且随着掺杂量的增加而逐渐降低,表明共掺杂可抑制光生电荷的复合.电化学测试结果表明,后热处理和C-I共掺杂的样品界面电荷转移电阻降低,导电率和电荷迁移率增加,从而有助于提高光催化性能.光解水产氢性能测试表明,后热处理和C-I共掺杂有利于催化剂产氢速率的提高,改性后CNIN0.2的产氢速率达168.2μmol/h,是纯氮化碳的9.8倍.经过多次循环测试,其产氢性能保持稳定而没有显著下降,表明其产氢稳定性较好.     

Solid‐State Carbon Dots with Efficient Cyan Emission towards White Light‐Emitting Diodes

Efficient cyan‐emitting solid carbon dots (CDs) were synthesized via a one‐pot hydrothermal method. The obtained solid CDs show a broad absorption from 270–460 nm with a maximum around 400 nm, and emit intense cyan light around 500 nm with an internal photoluminescence quantum efficiency of 34.1 % under 400 nm excitation. The emission maximum of the solid CDs remains unchanged under 320–400 nm excitations. Compared with dilute aqueous of CDs (2.5 mg mL^?1), the emission of solid CDs shows an obvious red‐shift of 50 nm. The red‐shift is caused by resonant energy transfer due to larger spectral overlap and smaller interparticle distance, together with a new surface state caused by aggregation in solid CDs. A lamp with white LEDs was fabricated by dropping a mixture of solid CDs, CaAlSiN₃:Eu²⁺ and silicon resin on the top of a near‐ultraviolet LED chip. Under an operating current of 20 mA, the as‐fabricated white LED generates a high‐quality, warm white light with a color rendering index of 86.1, a color temperature of 4340 K, and a luminescence efficiency of 31.3 lm W^?1.     

具有高可见光催化活性的Ti3+和碳共掺杂改性的TiO2光催化剂

以乙醇为碳源,采用操作简单的真空活化法一步实现对TiO₂的Ti³⁺与C的共掺杂改性,TiO₂用X衍线衍射、紫外-可见光谱、顺磁共振、X射线光电子能谱和红外光谱等手段表征了催化剂的结构、组成、光学性质. 结果表明, 经Ti³⁺与C共掺杂改性后的催化剂表现出高的可见光降解甲基橙活性. 复合在催化剂表面的石墨可以增强催化剂对可见光的响应范围,而Ti³⁺与氧缺陷形成的掺杂能级则可以提高光生电子的迁移效率. 实验表明,两者之间的协同作用促进了其可见光催化活性的提高.     

Silver Quantum Cluster (Ag9)‐Grafted Graphitic Carbon Nitride Nanosheets for Photocatalytic Hydrogen Generation and Dye Degradation

We report the visible‐light photocatalytic properties of a composite system consisting of silver quantum clusters [Ag₉(H₂MSA)₇] (H₂MSA=mercaptosuccinic acid) embedded on graphitic carbon nitride nanosheets (AgQCs‐GCN). The composites were prepared through a simple chemical route; their structural, chemical, morphological, and optical properties were characterized by using X‐ray diffraction (XRD), energy dispersive X‐ray spectroscopy, transmission electron microscopy, UV/Vis diffuse reflectance spectroscopy, and photoluminescence spectroscopy. Embedment of [Ag₉(H₂MSA)₇] on graphitic carbon nitride nanosheets (GCN) resulted in extended visible‐light absorption through multiple single‐electron transitions in Ag quantum clusters and an effective electronic structure for hydroxyl radical generation, which enabled increased activity in the photocatalytic degradation of methylene blue and methyl orange dye molecules compared with pristine GCN and silver nanoparticle‐grafted GCN (AgNPs‐GCN). Similarly, the amount of hydrogen generated by using AgQCs‐GCN was 1.7 times higher than pristine GCN. However, the rate of hydrogen generated using AgQCs‐GCN was slightly less than that of AgNPs‐GCN because of surface hydroxyl radical formation. The plausible photocatalytic processes are discussed in detail.     

ZnIn2S4 flowerlike microspheres embedded with carbon quantum dots for efficient photocatalytic reduction of Cr(VI)

Development of efficient heterostructured photocatalysts that respond to visible light remains a considerable challenge. We herein show the synthesis of ZnIn₂S₄/carbon quantum dot hybrid photocatalysts with flowerlike microspheres via a facile solvothermal method. The ZnIn₂S₄/carbon quantum dot flowerlike microspheres display enhanced photocatalytic and photoelectrochemical activity compared with that of pure ZnIn₂S₄. With a content of only 0.5 wt % carbon quantum dots, 93% of Cr(VI) is reduced under visible-light irradiation at 40 min. As a co-catalyst, the carbon quantum dots improve the light absorption and lengthen the lifetime of charge carriers, consequently enhancing the photocatalytic and photoelectrochemical activity.     

Enhanced photocatalytic performance of carbon quantum dots/BiOBr composite and mechanism investigation

Novel CQDs/BiOBr composite photocatalysts are constructed via a simple hydrothermal synthesis and show superior activity in photocatalytic degradation of organic pollutants.