具有同质多晶依赖性发射的非芳香性发光化合物

不含芳(杂)环、单键-重键交替单元等大共轭结构的纯有机发光材料引起了人们的广泛关注,但其结构与发光性质间的关系仍需进一步明确.本文研究了氧杂酸酐与氧杂酰亚胺两种非芳香性发光化合物.通过在不同溶剂中培养单晶,得到了具有不同发光颜色及荧光-磷光双发射的同质多晶体,发光效率最高达17.0％.这种高效发射可归因于含π电子与n电...     

Clustering-triggered Emission of Nonaromatic Polymers with Multitype Heteroatoms and Effective Hydrogen Bonding

Nonconventional luminophores without large conjugated structures are attracting increasing attention for their unique aggregation-induced emission(AIE)properties and promising applications in optoelectronic and biomedical areas.The emission mechanism,however,remains elusive,which makes rational molecular design difficult.Recently,we proposed the clustering-triggered emission(CTE)mechanism to illustrate the emission.The clustering of electron-rich nonconventional chromophores withπand/or n electrons and consequent electron cloud overlap is crucial to the luminescence.Herein,based on the CTE mechanism,nonaromatic polymers containing multitype heteroatoms(i.e.,O,N,and S)and involving amide(CONH)and sulfide(-S-)groups were designed and synthesized through facile thiol-ene click chemistry.The resulting polymers demonstrated typical concentration-enhanced emission,AIE phenomenon,and excitation-dependent emission.Notably,compared with polysulfides,these polymers exhibited much higher solid-state emission efficiencies,because of the incorporation of amide units,which contributed to the formation of emissive clusters with highly rigidified conformations through effective hydrogen bonding.Furthermore,distinct persistent cryogenic phosphorescence or even room temperature phosphorescence(RTP)was noticed.These photophysical behaviors can well be rationalized in terms of the CTE mechanism,indicating the feasibility of rational molecular design and luminescence regulation.     

Crosslink‐Enhanced Emission Effect on Luminescence in Polymers: Advances and Perspectives

The crosslink‐enhanced emission effect was first proposed to explore the strong luminescence of nonconjugated polymer dots possessing only either non‐emissive or weakly emissive sub‐luminophores. Interesting phenomena in recent research indicate such enhancement caused by extensive crosslinking appears in diverse luminescent polymers with sub‐luminophores (electron‐rich heteroatomic moieties) or luminophores (conjugated π domains). This enhancement can promote the emission from nonluminous to luminous, from weakly luminous to strongly luminous, and even convert the pathway of radiative transitions. The concept of the crosslink‐enhanced emission effect should be updated and extended to an in‐depth spatial effect, such as electron overlap and energy splitting in confined domains by effective crosslinking, more than initial immobilization. This Minireview outlines the development of the crosslink‐enhanced emission effect from the perspective of the detailed classification, inherent mechanism and applicable systems. An outlook on the further exploration and application of this theory are also proposed.     

Prevalent intrinsic emission from nonaromatic amino acids and poly(amino acids)

Nonaromatic amino acids are generally believed to be nonemissive, owing to their lack of apparently remarkable conjugation within individual molecules. Here we report the intrinsic visible emission of nonaromatic amino acids and poly(amino acids) in concentrated solutions and solid powders. This unique and widespread luminescent characteristic can be well rationalized by the clustering-triggered emission(CTE) mechanism, namely the clustering of nonconventional chromophores(i.e. amino, carbonyl,and hydroxyl) and subsequent electron cloud overlap with simultaneous conformation rigidification. Such CTE mechanism is further supported by the single crystal structure analysis, from which 3 D through space electronic communications are uncovered.Besides prompt fluorescence, room temperature phosphorescence(RTP) is also detected from the solids. Moreover, persistent RTP is observed in the powders of exampled poly(amino acids) of ε-poly-L-lysine(.-PLL) after ceasing UV irradiation. These results not only illustrate the feasibility of employing the building blocks of nonaromatic amino acids in the exploration of new luminescent biomolecules, but also provide significant implications for the emissions of peptides and proteins at aggregated or crystalline states. Meanwhile, they may also shed lights on further understanding of autofluorescence from biological systems.     

Achieving White-Light Emission Using Organic Persistent Room Temperature Phosphorescence

Artificial lighting currently consumes approximately one-fifth of global electricity production. Organic emitters with white persistent RTP have potential for applications in energy-efficient lighting technologies, due to their ability to harvest both singlet and triplet excitons. Compared to heavy metal phosphorescent materials, they have significant advantages in cost, processability, and reduced toxicity. Phosphorescence efficiency can be improved by introducing heteroatoms, heavy atoms, or by incorporating luminophores within a rigid matrix. White-light emission can be achieved by tuning the ratio of fluorescence to phosphorescence intensity or by pure phosphorescence with a broad emission spectrum. This review summarizes recent advances in the design of purely organic RTP materials with white-light emission, describing single-component and host-guest systems. White phosphorescent carbon dots and representative applications of white-light RTP materials are also introduced.     

Topology-Controlled AIEE of Iminocoumarin Luminophores

Aggregation-induced emission enhancement (AIEE) is an unusual phenomenon where luminophores show a higher photoluminescence efficiency in the aggregated and solid state. We report the design and synthesis of a series of luminophores 1 – 4 with imine functionality at 6 position of coumarin and studied their AIE propensities on self-assembly. The effect of the topology of the phenolic hydroxyl group on the emission behaviour of the luminophores has been investigated. The imines show significant solvatochromism with high emission in non-polar solvents, whereas the emission gets quenched in the polar solvent. The fluorescence in the toluene-hexane mixture arises due to the aggregation of fluorophores and falls under the category of AIEE. Not only the solution state emission of the isomeric iminocoumarin luminophores is notably varied, but also their solid-state emission found to be significantly different from each other. Moreover, the iminocoumarin 1 selectively recognizes Fe(III) over Fe(II) with a prominent color change. In situ oxidation of Fe(II) with H₂O₂ exhibits the same effect like Fe(III) and developed a chemical combinational logic gate.     

Excited-state conformation capture by supramolecular chains towards triplet-involved organic emitters

Nowadays,the development of trip let-involved materials becomes a hot research topic in solid-state luminescence fields.However,the mechanism of trip let-involved emission still remains some mysteries to conquer.Here,we proposed a new concept of excited-state confo rmation capture for the const ructio ns of different types of trip let-involved materials.Firstly,excited-state conformation could be trapped by supramolecular chains in crystal and fo rm a new optimum excited-state structure which is different from that in solution or simple rigid environment,leading to bright thermally activated delayed fluorescence(TADF) emission.Based on excited-state conformation capture methodology,next,we obtained roomtemperature phosphorescence(RTP) by introducing Br atoms for the enhancement of intersystem crossing.It could be concluded from experime ntal results that TADF may originate from aggregate effect while RTP may derive from monomers.Finally,heavy-atom free RTP and ultra RTP were achieved by eliminating aggregate effect.This wo rk could not only exte nd the design methodology of triplet-involved materials but also set clear evidences for the mechanism of triplet-involved emissions.     

D-A structured high efficiency solid luminogens with tunable emissions: Molecular design and photophysical properties

The combination of an electron-accepting unit with aggregation-induced emission features and varying electron-donating arylamines yields high efficiency solid luminogens with tunable emissions from green to red.     

Intermolecular Charge-Transfer Luminescence by Self-Assembly of Pyridinium Luminophores in Solutions

Designing a luminophore for application both in solution and in the solid state is a highly challenging task given the distinct nature of intermolecular interactions in these phases. In this context, we demonstrate that self-assembly of non-emissive charged pyridinium luminophores enables luminescence in solutions through a mechanism that is characteristic for the crystal state. Specifically, protonation of pyridine luminophore subunits in a solution promotes oligomer formation through intermolecular π⁺-π interactions, leading to an intermolecular charge-transfer type luminescence. The luminescence turn-on by protonation is utilized for a highly efficient solution-state luminescent sensing of hydrogen chloride and sulfonic acids (TfOH, TsOH and MsOH) with detection limits spanning the range from 0.06 to 0.33 ppm. The protonation followed by self-assembly results in a bathochromic shift of the emission from 420 nm to 550 nm.     

Ultralong organic room-temperature phosphorescence of electron-donating and commercially available host and guest molecules through efficient F?rster resonance energy transfer

Ultralong organic room-temperature phosphorescence(RTP) materials have attracted tremendous attention recently due to their diverse applications. Several ultralong organic RTP materials mimicking the host-guest architecture of inorganic systems have been exploited successfully. However, complicated synthesis and high expenditure are still inevitable in these studies. Herein, we develop a series of novel host-guest organic phosphorescence systems, in which all luminophores are electron-rich, commercially available and halogen-atom-free. The maximum phosphorescence efficiency and the longest lifetime could reach 23.6% and 362 ms, respectively. Experimental results and theoretical calculation indicate that the host molecules not only play a vital role in providing a rigid environment to suppress non-radiative decay of the guest, but also show a synergistic effect to the guest through F?rster resonance energy transfer(FRET). The commercial availability, facile preparation and unique properties also make these new host-guest materials an excellent candidate for the anti-counterfeiting application. This work will inspire researchers to develop new RTP systems with different wavelengths from commercially available luminophores.     

Induction of Strong Long‐Lived Room‐Temperature Phosphorescence of N‐Phenyl‐2‐naphthylamine Molecules by Confinement in a Crystalline Dibromobiphenyl Matrix

The design and preparation of metal‐free organic materials that exhibit room‐temperature phosphorescence (RTP) is a very attractive topic owing to potential applications in organic optoelectronic devices. Herein, we present a facile approach to efficient and long‐lived organic RTP involving the doping of N‐phenylnaphthalen‐2‐amine (PNA) or its derivatives into a crystalline 4,4′‐dibromobiphenyl (DBBP) matrix. The resulting materials showed strong and persistent RTP emission with a quantum efficiency of approximately 20 % and a lifetime of a few to more than 100 milliseconds. Bright white dual emission containing blue fluorescence and yellowish‐green RTP from the PNA‐doped DBBP crystals was also confirmed by Commission Internationale de l'Eclairage (CIE) coordinates of (x=0.29–0.31, y=0.38–0.41).     

Carbon Dots with Dual‐Emissive,Robust, and Aggregation‐Induced Room‐Temperature Phosphorescence Characteristics

Carbon dots (CDs) with dual‐emissive, robust, and aggregation‐induced RTP characteristics are reported for the first time. The TA‐CDs are prepared via hydrothermal treatment of trimellitic acid and exhibit unique white prompt and yellow RTP emissions in solid state under UV excitation (365 nm) on and off, respectively. The yellow RTP emission of TA‐CDs powder should be resulted from the formation of a new excited triplet state due to their aggregation, and the white prompt emission is due to their blue fluorescence and yellow RTP dual‐emissive nature. The RTP emission of TA‐CDs powder was highly stable under grinding, which is very rare amongst traditional pure organic RTP materials. To employ the unique characteristics of TA‐CDs, advanced anti‐counterfeiting and information encryption methodologies (water‐stimuli‐response producing RTP) were preliminarily investigated.     

Room-Temperature Phosphorescence Emitters Exhibiting Red to Near-Infrared Emission Derived from Intermolecular Charge-Transfer Triplet States of Naphthalenediimide−Halobenzoate Triad Molecules

Room-temperature phosphorescence (RTP) emitters have attracted significant attention. However, purely organic RTP emitters in red to near-infrared region have not been properly investigated. In this study, a series of naphthalenediimide−halobenzoate-linked molecules are synthesized, one of which exhibits efficient RTP properties, showing red to near-infrared emission in solid and aqueous dispersion. Spectroscopic studies and single-crystal X-ray diffraction analysis have shown that the difference in the stacking modes of compounds affects the optical properties, and the formation of intermolecular charge-transfer complexes of naphthalenediimide−halobenzoate moiety results in a bathochromic shift of absorption and RTP properties. The time-dependent density functional theory calculations showed that the formation of charge-transfer triplet states and the external heavy atom effect of the halogen atom enhance the intersystem crossing between excited singlet and triplet states.     

Crosslink-Enhanced Emission Effect on Luminescence in Polymers: Advances and Perspectives

The crosslink-enhanced emission effect was first proposed to explore the strong luminescence of nonconjugated polymer dots possessing only either non-emissive or weakly emissive sub-luminophores. Interesting phenomena in recent research indicate such enhancement caused by extensive crosslinking appears in diverse luminescent polymers with sub-luminophores (electron-rich heteroatomic moieties) or luminophores (conjugated π domains). This enhancement can promote the emission from nonluminous to luminous, from weakly luminous to strongly luminous, and even convert the pathway of radiative transitions. The concept of the crosslink-enhanced emission effect should be updated and extended to an in-depth spatial effect, such as electron overlap and energy splitting in confined domains by effective crosslinking, more than initial immobilization. This Minireview outlines the development of the crosslink-enhanced emission effect from the perspective of the detailed classification, inherent mechanism and applicable systems. An outlook on the further exploration and application of this theory are also proposed.     

Intermolecular Electronic Coupling of Organic Units for Efficient Persistent Room‐Temperature Phosphorescence

Although persistent room‐temperature phosphorescence (RTP) emission has been observed for a few pure crystalline organic molecules, there is no consistent mechanism and no universal design strategy for organic persistent RTP (pRTP) materials. A new mechanism for pRTP is presented, based on combining the advantages of different excited‐state configurations in coupled intermolecular units, which may be applicable to a wide range of organic molecules. By following this mechanism, we have developed a successful design strategy to obtain bright pRTP by utilizing a heavy halogen atom to further increase the intersystem crossing rate of the coupled units. RTP with a remarkably long lifetime of 0.28 s and a very high quantum efficiency of 5 % was thus obtained under ambient conditions. This strategy represents an important step in the understanding of organic pRTP emission.     

Room-temperature phosphorescence from purely organic materials

Room-temperature phosphorescence (RTP) materials have attracted great attention due to their involvement of excited triplet states and comparatively long decay lifetimes. In this short review, recent progress on enhancement of RTP from purely organic materials is summarized. According to the mechanism of phosphorescence emission, two principles are discussed to construct efficient RTP materials: one is promoting intersystem crossing (ISC) efficiency by using aromatic carbonyl, heavyatom, or/and heterocycle/heteroatom containing compounds; the other is suppressing intramolecular motion and intermolecular collision which can quench excited triplet states, including embedding phosphors into polymers and packing them tightly in crystals. With aforementioned strategies, RTP from purely organic materials was achieved both in fluid and rigid media.     

Room temperature phosphorescence optosensing of benzo[a]pyrene in water using halogenated molecularly imprinted polymers

A selective optosensor for benzo[a]pyrene (BaP) determination in water samples, using a molecularly imprinted polymer (MIP) for the recognition of the analyte, has been developed. Detection was based on measurements of the native strong room temperature phosphorescence (RTP) emission from the BaP recognized by the MIP. The non-covalent MIP was synthesized using BaP as a molecular template. Different halogenated-bisphenol A compounds were compared as precursors in the polymerization (thus ensuring the presence of a heavy atom, required to induce RTP emission from the analyte). In the developed optosensor, samples are injected in a flow system and the analyte is on-line retained onto the polymeric material. In the absence of oxygen (using sodium sulfite as the oxygen scavenger) the heavy atom present in the MIP structure induced analytically useful RTP emission from the recognized BaP. After measurement of the luminescent emission, the sensing material can be easily regenerated by passing 2 mL of methanol over the MIP. The optosensor demonstrated a very high selectivity for BaP determination in water even in the presence of other luminophores that could be non-specifically adsorbed onto the MIP surface. Under optimal experimental conditions, a benzo[a]pyrene detection limit of 10 ng L(-1) (20 mL sample injection volume) was achieved with good reproducibility (a RSD of 3% was obtained for 1 microg L(-1) BaP). Finally, the proposed optosensor was successfully applied to the analysis of spiked natural water with BaP.     

Room temperature phosphorescence from organic luminogens in“non-crystalline” state

ABSTRACT

The field of room temperature phosphorescence (RTP) from purely organic materials has made rapid strides in recent years primarily due to its tremendous promise in the areas of photovoltaics, photocatalysis, bioimaging, sensing, etc. Although, the RTP properties, at one time, were considered to be exclusive features of organometallic and inorganic phosphors, a great progress in the molecular design coupled with a much better understanding of the triplet state stabilisation has led to the creation of a plethora of organic RTP materials in the current decade. In this focussed review, a special category of organic luminogens which, rather remarkably, exhibit efficient RTP emission in amorphous or fluidic state is discussed. A few selected examples of such ‘non-crystalline’ organic RTP luminogens are highlighted with an emphasis on the basic design principles and the strategies to increment the phosphorescence efficiency.     

Two-Coordinate Copper(I)/NHC Complexes: Dual Emission Properties and Ultralong Room-Temperature Phosphorescence

As a kind of photoluminescent material, Cu^I complexes have many advantages such as adjustable emission, variable structures, and low cost, attracting attention in many fields. In this work, two novel two-coordinate Cu^I-N-heterocyclic carbene complexes were synthesized, and they exhibit unique dual emission properties, fluorescence and phosphorescence. The crystal structure, packing mode, and photophysical properties under different conditions were systematically studied, proving the emissive mechanism to be the locally excited state of the carbazole group. Based on this mechanism, ultralong room-temperature phosphorescence (RTP) with a lifetime of 140 ms is achieved by selective deuteration of the carbazole group. These results deepen the understanding of the luminescence mechanism and design strategy for two-coordinate Cu^I complexes, and prove their potential in applications as ultralong RTP materials.     

Hot electron-induced electrogenerated chemiluminescence of 1-aminonaphthalene-4-sulphonate at oxide-covered aluminium electrodes in aqueous solution

Electrogenerated chemiluminescence of 1-aminonaphthalene-4-sulphonate (ANS) provides a sensitive means for the detection of the ANS in aqueous solution when oxide-covered aluminium electrodes are used as tunnel emission electrodes and cathodic pulse polarisation is used for the excitation of the luminophore. During the pulse polarisation of insulating oxide film-coated aluminium cathodes, hot electrons are tunnel emitted from the aluminium to the aqueous electrolyte solution by direct field-assisted tunnelling (in the case of oxide films of thickness 2-6 nm) or by Fowler-Nordheim (FN) tunnelling in the cases of thicker oxide films. As a result of direct tunnel emission of these energetic electrons, the generation of hydrated electrons (e_aq⁻) becomes possible. These electrochemically generated, extremely strong reductants (dry hot or hydrated electrons) make the efficient excitation of various types of luminophores at thin insulating film-covered electrodes possible and provide a means for sensitive immunoassays and DNA-probing assays when these luminophores are used as label molecules.