Metal-free synthesis of pyridyl conjugated microporous polymers with tunable bandgaps for efficient visible-light-driven hydrogen evolution

Conjugated microporous polymers (CMPs) with tunable bandgaps have attracted increasing attention for photocatalytic hydrogen evolution. However, the synthesis of CMPs usually needs expensive metal-based catalysts. Herein, we report a metal-free synthetic route to fabricate pyridyl conjugated microporous polymers (PCMPs) via a condensed polymerization between aldehyde and aryl ketone monomers. The PCMPs show widely tunable specific surface areas (347–418 m²/g), which were controlled via changing the used monomers. The PCMPs synthesized using monomers of dialdehyde and diacetylbenzene (diacetylpyridine) in the presence of pyridine exhibited the highest visible-light driven hydrogen evolution rate (9.56 µmol/h). These novel designed PCMPs provide wide adaptability to current materials designed for high-performance photocatalysts in different applications.     

有序中孔炭的电化学储氢性能

将蔗糖、聚环氧乙烯-聚环氧丙烯-聚环氧乙烯三嵌段共聚物和硅源构成的复合物进行预炭化、炭化和除硅处理合成出有序中孔炭, 采用XRD、TEM、HRTEM和N2吸脱附等手段对其进行表征, 并将有序中孔炭制成电极开展恒流充放电储氢性能研究. 结果显示, 具有较高比表面积(720 m2·g-1)和孔容(0.86 cm3·g-1)的有序中孔炭材料的电化学储氢容量为70.1 mAh·g-1, 高于具有相对较低比表面积(610 m2·g-1)和孔容(0.66 cm3·g-1)的有序中孔炭储氢容量(64.1 mAh·g-1). 通过与单壁碳纳米管电极(25.9 mAh·g-1)的对比, 表明有序中孔炭具有良好的电化学储氢性能和更高的电化学活性.     

具有MFI结构的La-Si ZSM-5分子筛的合成

首次合成了稀土元素掺杂的具有MFI结构的La-Si ZSM-5分子筛,并采用各种技术对所合成的分子筛进行了表征.XRD衍射表明所合成的微孔材料具有典型的MFI结构,N2吸脱附、FT-IR及SEM测试结果均表明镧原子进入了分子筛骨架.     

Truxene-based Conjugated Microporous Polymers via Different Synthetic Methods

Four truxene-based conjugated microporous polymers(Tr-CMPs)were prepared via different synthetic methods and their structure-property relationships were studied.The polymer networks have high Brunauer-Emmett-Teller(BET)specific surface areas ranging from 554 m^2·g^–1to 1024 m^2·g^–1.Pore sizes of the CMPs with different linkers are mainly located between 0.60 and 1.96 nm.Among all the Tr-CMPs,TrCMP4 has the highest BET surface area of 1024 m^2·g^–1and exhibits the highest H2 uptake of 0.88 wt%.Tr-CMP2 prepared by Suzuki-Miyaura coupling reaction has the highest photoluminescence quantum yields(PLQYs)of 13.06% and CO2 uptake of 6.25 wt%.     

Tetra-armed conjugated microporous polymers for gas adsorption and photocatalytic hydrogen evolution

Two novel tetra-armed conjugated microporous polymers with different geometries have been designed and synthesized via Suzuki-Miyaura cross coupling polycondensation. Both polymers are stable in various organic solvents tested and are thermally stable. The pyrene-containing polymer of PrPy with the rigid pyrene unit shows a higher Brunauer-Emmet-Teller specific surface area of 1219 m~2 g~(-1) than the tetraphenylethylene-containing polymer of PrTPE(770 m~2 g~(-1)), which leads to a high CO_2 uptake ability of 3.89 mmol g~(-1) at 1.13 bar/273 K and a H_2 uptake ability of 1.69 wt% at 1.13 bar/77 K. The photocatalytic hydrogen production experiments revealed that PrPy also shows a better photocatalytic performance than PrTPE due to the higher conjugation degree and planar structure, the broader UV-visible(UV-Vis) absorption, the lower photoluminescence lifetime, and the higher specific surface area.     

曙红-碳纳米管-CuO/CoO体系的光催化还原水制氢性能

构建了曙红-碳纳米管-CuO/CoO光催化体系(Eosin Y-MWNTs-CuO/CoO),并利用三乙醇胺作为牺牲剂考察了其可见光催化还原水制氢性能。结果表明,Eosin Y-MWNTs-CuO/CoO是一个高效的可见光催化剂,其光催化还原水析氢的速率可达403.1μmol.g-1.h-1。同时,还研究了溶液pH值、CuO/CoO负载量等因素对光催化体系活性的影响,并对Eosin Y-MWNTs-CuO/CoO的光催化机制进行了初步探讨。     

Thiophene-based conjugated microporous polymers: synthesis,characterization and efficient gas storage

A series of thiophene-based conjugated microporous polymers(ThPOPs) have been synthesized on the basis of ferric chloride-catalyzed oxidative coupling polymerization of multi-thienyl monomers. The structures of ThPOPs were confirmed via solid-state 13 C CP/MAS NMR spectroscopy and Fourier-transform infrared spectroscopy. The ThPOPs possess high porosities and their high Brunauer-Emmett-Teller specific surface area results vary between 350 and 1320 m~2 g~(-1). The presence of abundant ultra-micropores at 0.50–0.63 nm allows ThPOPs efficient gas(carbon dioxide, methane, and hydrogen) adsorption.     

溶剂热法制备球状Ni3S4及其在超级电容器的应用

应用溶剂热法合成Ni3S4微米球,采用XRD和SEM表征样品物相结构、观察其微观形貌.电化学性能测试表明Ni3S4电极有较好的比电容性能,0.5和4 A.g-1放电电流密度下,其比容量分别为1120.6和433.4 F.g-1;1000周循环充放电后,其容量保持率为89.37%和84.88%.XRD、XPS和CV测试结果表明,其电化学反应机理为Ni(OH)2与NiOOH的相互转化.     

曙红-碳纳米管-NiO光催化体系的构建及光催化还原水制氢性能

构建了曙红-碳纳米管-NiO(Eosin Y-MWNTs-NiO)光催化体系, 利用氢气还原法对其进行了活化, 然后使用三乙醇胺作为牺牲剂考察了其可见光催化还原水制氢性能. 研究结果表明, 氢气活化后的Eosin Y-MWNTs-NiO是一个高效的可见光催化剂. 其光催化还原水析氢的速率可达344 μmol·g-1·h-1. 其中, 氢气活化对催化剂的活性具有重要影响, 未活化的Eosin Y-MWNTs-NiO光催化体系的活性仅为活化后的光催化体系的1/10. 此外, 还研究了溶液pH值和催化剂用量对催化体系活性的影响. 在此基础上, 对Eosin Y-MWNTs-NiO的光催化机制进行了初步探讨.     

多孔聚合物贮氢材料的研究进展

微孔聚合物由于具有较高的比表面积,因此可用作物理吸附贮氢材料.本文通过比较0.1MPa、77K下自具微孔聚合物、超交联聚合物等多孔聚合物与其它多孔贮氢材料(如碳材料、金属有机网络等)的贮氢性能,阐述了比表面积、孔尺寸及孔形貌、与氢气的作用力等因素对多孔聚合物贮氢量的影响,由于合成超交联聚合物的单体多且孔形貌容易控制,因此超交联聚合物成为具有发展潜力的贮氢聚合物.     

马铃薯淀粉基微孔炭微球的制备及其电化学性能

以存在广泛的生物质原料马铃薯淀粉为前驱体, 通过磷酸对淀粉分解的促进作用和KOH活化法制备微孔炭微球材料. 采用77 K条件下的N₂吸附、扫描电子显微镜(SEM)分别对所得样品的孔隙结构、形貌特征进行表征. 采用傅里叶变换红外(FT-IR)光谱对磷酸促进淀粉分解的机理进行研究. 在6 mol·L^-1 KOH 电解质溶液中的电化学测试表明了所得微孔炭微球材料的优异电容特性. 在50 mA·g^-1的电流密度下, 电容量为363.6 F·g^-1. 此外, 该材料表现出了优异的倍率性能, 在扫描速率为300 mV·s^-1的条件下, 所得循环伏安(CV)曲线仍能保持良好的矩形形状. 电化学测试结果表明, 马铃薯淀粉基微孔炭微球材料在高性能电化学电容器的电极材料领域具有广阔的应用前景.     

等离子体共振协同S-scheme电荷转移促进W18O49/Cd0.5Zn0.5S高效光催化产氢

硫化锌镉(Cd_1-xZn_xS,01-xZn_xS太阳光响应范围,提高光生电子与空穴利用效率是当前的研究热点.本文采用溶剂热法分别制备了Cd_0.5Zn_0.5S纳米棒和W₁₈O₄₉纳米颗粒,然后借助超声辅助静电自组装策略成功获得具有紫外-可见-近红外光响应的W₁₈O₄₉/Cd_0.5Zn_0.5S异质结.分析表明,W₁₈O₄₉晶格氧空位周围过量自由电荷的集体振荡,引起强烈的局域表面等离子体共振(LSPR)吸收现象,使其对500~800 nm范围的光产生明显吸收,使体系具有紫外至近红外光响应能力;而且W₁₈O₄₉作为一种氧化型半导体材料,可与还原型Cd_0.5Zn_0.5S半导体之间形成S-scheme异质结,在内建电场、能带弯曲和静电相互作用下有效促进了光生电子和空穴的分离,并能保留强的氧化还原能力.对比实验发现,常温下以Na₂S/Na₂SO₃为牺牲剂,全光谱照射下,20%-W₁₈O₄₉/Cd_0.5Zn_0.5S的产氢速率可达147.7mmol·g^-1·h^-1,是Cd_0.5Zn_0.5S纳米棒单体的2.1倍;可见光下,复合样品的产氢活性约为Cd_0.5Zn_0.5S单体的1.89倍;近红外光下,Cd_0.5Zn_0.5S单体无产氢活性,而异质结的产氢速率约为0.2 mmol·g^-1·h^-1.进一步对样品波长依赖性研究发现,当365、400、450 nm的入射光仅能引起W18O49和Cd0.5Zn0.5S的带间激发时,它们的复合样品比Cd_0.5Zn_0.5S表现出更优异的产氢活性;当λ=550、600、650 nm以及>800 nm的入射光仅能引起W₁₈O₄₉的LSPR效应时,Cd_0.5Zn_0.5S单体无活性,而W₁₈O₄₉/Cd_0.5Zn_0.5S仍具有较高的催化性能、但随着波长的增大产氢速率逐渐降低,与复合样品瞬态光电流强度的变化趋势吻合良好.以上结果表明,W₁₈O₄₉与Cd_0.5Zn_0.5S二者形成的S-scheme界面异质结有效抑制了光生载流子的表面复合,且当入射光不足以引起带间激发时,W₁₈O₄₉的LSPR效应产生的"热电子"可有效注入到Cd_0.5Zn_0.5S,从而引起表面催化反应.进一步研究发现,当将反应温度从25提高到60°C时,20%-W₁₈O₄₉/Cd_0.5Zn_0.5S在全光谱下的产氢速率可提高到306.1mmol·g^-1·h^-1,表明温度对光催化产氢过程具有不可忽视的影响,可通过增强表面反应速率显著提高产氢活性.总之,本文通过一种简便方法获得了具有紫外-可见-近红外响应的S型W₁₈O₄₉/Cd_0.5Zn_0.5S异质结光催化剂,详细对比了不同波段下样品的光电特性及催化活性,最终在S-scheme电荷转移机制和LSPR"热电子"注入过程的协同作用下,复合样品活性比Cd_0.5Zn_0.5S单体有了明显提高.     

硫辅助合成高孔隙率大孔氮化硼材料

采用硫粉辅助的方法合成了具有一定有序孔洞结构的三维大孔氮化硼材料,具有高比表面积(230 m2.g-1)和高孔隙率(85.6%),并呈现开孔结构。在未加入硫粉的情况下则只形成完全无序的三维大孔氮化硼,并且比表面积和孔隙率分别降至122m2.g-1和73.7%。热重测试表明两种产品均具有良好的抗氧化性能。本文还对这种大孔材料的形成过程和硫粉的作用进行了初步的探讨。     

Selective Carbon Dioxide Capture in Antifouling Indole-based Microporous Organic Polymers

Intermolecular synergistic adsorption of indole and carbonyl groups induced by intermolecular hydrogen bonding makes microporous organic polymer(PTICBL)exhibit high CO2 uptake capacity(5.3 mmol·g^-1at 273 K)and selectivities(CO2/CH4=53,CO2/N2=107 at 273 K).In addition,we find that indole units in the PTICBL networks inhibit the attachment of bacteria(E.coil and S.aureus)on the surface of PTICBL and extend its service life in CO2 capture.     

超声驱动制备Au/CdS催化剂及其高效光催化产氢北大核心CSCD

以HAuCl_(4)为前驱体,采用一种简单、快速的超声驱动法,在甲醇溶液中形成Au纳米粒子并沉积在CdS基底上合成Au/CdS,用于光催化分解水产氢.结果表明:当沉积Au的含量达到1.0%(质量分数)时,Au/CdS的产氢活性显著增强,可达到6.7 mmol·g^(-1) ·h^(-1) ,是纯CdS的21.6倍.超声驱动可在甲醇溶液中有效将前驱体(HAuCl_(4))中的Au3+还原为Au纳米粒子,并与CdS表面紧密作用,提高了光生电荷的分离效率,实现了高效光催化产氢.有关结果为快速、有效制备光催化产氢性能较好的金属/半导体催化剂提供了新的方法.     

单分散Ni簇锚定在CN上用于高效光催化析氢

利用太阳光在常温常压下驱动光催化反应高效进行是解决人类面临的能源、环境问题从而实现绿色化学的理想方案之一.然而,兼顾效率、成本和稳定性的高性能光催化体系的研究依然存在巨大的挑战.石墨氮化碳(g-C3N4)基光催化剂由于高稳定性、无毒无害和适合的能带结构,在光催化制氢方面存在巨大潜力.然而,表面的慢反应速率导致了光生电子...     

<Emphasis Type="Italic">Tetra</Emphasis>-armed conjugated microporous polymers for gas adsorption and photocatalytic hydrogen evolution

Two novel tetra-armed conjugated microporous polymers with different geometries have been designed and synthesized via Suzuki-Miyaura cross coupling polycondensation. Both polymers are stable in various organic solvents tested and are thermally stable. The pyrene-containing polymer of PrPy with the rigid pyrene unit shows a higher Brunauer-Emmet-Teller specific surface area of 1219 m² g^?1 than the tetraphenylethylene-containing polymer of PrTPE (770 m² g^?1), which leads to a high CO₂ uptake ability of 3.89 mmol g^?1 at 1.13 bar/273 K and a H₂ uptake ability of 1.69 wt% at 1.13 bar/77 K. The photocatalytic hydrogen production experiments revealed that PrPy also shows a better photocatalytic performance than PrTPE due to the higher conjugation degree and planar structure, the broader UV-visible (UV-Vis) absorption, the lower photoluminescence lifetime, and the higher specific surface area.     

盐酸强力霉素分子印迹聚合物的制备及分子识别性能

以盐酸强力霉素(DC)为模板分子、甲基丙烯酸为功能单体、乙二醇二甲基丙烯酸酯为交联剂、四氢呋喃(THF)为溶剂.采用本体聚合法制备了DC的分子印迹聚合物.在水溶液中,采用平衡结合方法和Scatchard模型评价了该聚合物的结合特性及识别机理,并考察了DC分子印迹聚合物的选择性吸附能力.结果表明,在所研究的浓度范围内,D...     

Preparation of a carbon-based solid acid catalyst by sulfonating activated carbon in a chemical reduction process

Sulfonated (SO(3)H-bearing) activated carbon (AC-SO(3)H) was synthesized by an aryl diazonium salt reduction process. The obtained material had a SO(3)H density of 0.64 mmol·g-1 and a specific surface area of 602 m2·g-1. The catalytic properties of AC-SO(3)H were compared with that of two commercial solid acid catalysts, Nafion NR50 and Amberlyst-15. In a 10-h esterification reaction of acetic acid with ethanol, the acid conversion with AC-SO(3)H (78%) was lower than that of Amberlyst-15 (86%), which could be attributed to the fact that the SO(3)H density of the sulfonated carbon was lower than that of Amberlyst-15 (4.60 mmol·g-1). However, AC-SO(3)H exhibited comparable and even much higher catalytic activities than the commercial catalysts in the esterification of aliphatic acids with longer carbon chains such as hexanoic acid and decanoic acid, which may be due to the large specific surface area and mesoporous structures of the activated carbon. The disadvantage of AC-SO(3)H is the leaching of SO(3)H group during the reactions.     

微波合成法制备锂离子电池正极材料Li2FeSiO4

研究了一种制备锂离子电池正极材料Li2FeSiO4的新方法.采用机械球磨结合微波热处理合成了Li2FeSiO4正极材料.通过XRD、SEM和恒流充放电测试,对样品结构、形貌和电化学性能进行了表征和分析.与传统固相法合成的材料在晶体结构、微观形貌以及充放电性能方面进行了比较.结果表明,微波合成法可以快速制备具有正交结构的Li2FeSiO4材料;在650 ℃时处理12 min,获得了纯度高、晶粒细小均匀的产物,该产物具有较高的放电比容量和良好的循环性能.在60℃下以C/20倍率(电流密度,1C=160mA·g-1)进行充放电,首次放电容量为119.5 mAh·g-1,10次循环后放电容量为116.2 mAh·g-1.与传统高温固相法相比,微波合成法制备的材料具有较高的纯度、均匀的形貌和较好的电化学性能.