MICROPOROUS PVDF-HFP-BASED POLYMER MEMBRANES FORMED FROM SUPERCRITICAL CO2 INDUCED PHASE SEPARATION

Microporous poly(vinylidene fluoride-co-hexafluoropropylene)(PVDF-HFP)membranes following supercritical CO_2 induced phase separation process were prepared using four solvents.The solid electrolytes of PVDF-HFP were formed by microporous PVDF-HFP membranes filled and swollen by a liquid electrolyte.The effect of the solvents on the morphology and structure,electrolyte absorptions and lithium ionic conductivity of the activated membranes were investigated.It was approved that all the membrane had the simi...     

热致相分离法偏二氯乙烯-氯乙烯共聚物多孔膜的制备及性能

以偏二氯乙烯-氯乙烯共聚物[P(VDC-co-VC)]为成膜聚合物, 邻苯二甲酸二甲酯(DMP)为稀释剂, 采用热致相分离(TIPS)法制备了具有多孔结构的P(VDC-co-VC)膜. 通过聚合物-稀释剂二元体系相图、 场发射扫描电镜(FESEM)、 差示扫描量热仪(DSC)、 X射线衍射(XRD)、 原子力显微镜(AFM)、 纯水通量、 接触角、 孔径及其分布、 截留率及力学性能等研究了聚合物含量对P(VDC-co-VC)多孔膜结构和性能的影响. 结果表明, P(VDC-co-VC)-DMP二元体系成膜过程以液-液(L-L)分相为主, 随着聚合物含量增加, 膜的横截面由类花瓣状结构向胞腔状结构转变, 膜的孔连通性降低, 结构变得较为致密, 同时膜上表面孔隙率降低, 粗糙度增大. L-L分相时间和聚合物含量的变化, 导致膜结晶度先降低后增大. 聚合物含量的增加使膜上表面接触角、 断裂强度及蛋白截留率增加, 但膜的平均孔径、 孔隙率及纯水通量先增加后减小. 当聚合物质量分数为30%时, 所得膜通透性较优, 断裂强度可达7.5 MPa.     

熔融纺丝-拉伸法制备PVDF中空纤维膜及其油-水分离性能

以聚偏氟乙烯(PVDF)为成膜聚合物, 聚全氟乙丙烯(FEP)为添加剂, 聚乙二醇(PEG)和氯化钙(CaCl₂)为复合成孔剂, 采用熔融纺丝-拉伸法制备了PVDF中空纤维膜. 在制膜过程中未使用其它溶剂和稀释剂, 实现了制膜过程的相对绿色化. 分析和讨论了拉伸比对PVDF中空纤维膜结构与性能的影响, 测试了纤维膜的孔径分布、 力学性能和油-水分离性能等. 结果表明, 进行拉伸后处理的膜的孔径分布较窄, 在油包水乳液分离测试中, 分离效率均在97%以上, 表现出良好的油-水分离效果.     

Polymer-silica nanocomposite membranes for CO2 capturing

Reducing carbon dioxide (CO₂) is an area of great interest in current international efforts geared toward lowering emissions and combating global warming. In this work, amino-silica composite membranes were prepared and used to capture carbon dioxide. The surface of silica particles was chemically modified with amine to efficiently capture carbon dioxide. The phase separation technique was used to prepare the membranes from a composite containing polyvinylidene-fluoride-hexafluoropropylene (PVDF-HFP), amino-silica particles, acetone and water. SEM images revealed that the membranes composed of multilayers of porous polymer uniformly impregnated with silica particles. Both XRD and FTIR results have validated the perfect integration of silica particles within the polymeric network. The mechanical properties of the membrane are improved by the presence of silica particles as proved by the high tensile strength value (1.5 N/cm²) obtained for the PVDF-HFP/SiO₂ membrane compared to 0.9 N/cm² obtained for bare PVDF-HFP membrane. Also, we succeeded in recording SEM images to show that the plastic deformation of the film is associated with the formation of macro-holes. To the best of our knowledge this is the first time for such results to be monitored with SEM to observe the macroscopic evolution of the structure. Additionally, the surface area was significantly increased from 3.8 m²/g for bare PVDF-HFP membrane to 116.4 m²/g for PVDF-HFP impregnated with silica particles. Moreover, the CO₂ separation efficiency depends on both surface area and the quantity of amino-SiO₂ added to the membrane. The addition of amino-silica particles leads to a significant uptake of carbon dioxide compared to non-modified polymer membrane. The results obtained indicated that combing the phase separation with amino silica particles provided a cost-effective route to scaling up the synthesis of membranes that were mechanically stable and highly efficient at CO₂ capture.     

Studies on Pervaporation Separation of Ethanol/Water Mixtures with Membranes of Polypropylene Sulfonate Salts

Sulfonated polypropylene membranes loaded with different kinds of counter-ions were prepared by heterogeneous chiorosulfonation reaction of polypropylene membrane followed by hydrolysis and ion-exchange reaction. The membranes obtained were used for selective separation of ethanol/water mixtures by pervaporation. The effects of counter-ion species, ion-exchange capacity, solution composition, thickness of membrane and temperature on the separation behavior of the membranes were investigated. Microstructure and morphology of the membranes were examined by X-ray and SEM as well.     

PREPARATION OF HIGH DENSITY POLYETHYLENE/POLYETHYLENE-ΒLOCK- POLY(ETHYLENE GLYCOL) COPOLYMER BLEND POROUS MEMBRANES VIA THERMALLY INDUCED PHASE SEPARATION PROCESS AND THEIR PROPERTIES

High density polyethylene (HDPE)/polyethylene-Wock-poly(ethylene glycol) (PE-b-PEG) blend porous membranes were prepared via thermally induced phase separation (TIPS) process using diphenyl ether (DPE) as diluent. The phase diagrams of HDPE/PE-b-PEG/DPE systems were determined by optical microscopy and differential scanning calorimetry (DSC). By varying the content of PE-b-PEG, the effects of PE-b-PEG copolymer on morphology and crystalline structure of membranes were studied by scanning electron microscopy (SEM) and wide angle X-ray diffraction (WAXD). The chemical compositions of whole membranes and surface layers were characterized by elementary analysis, Fourier transform infrared spectroscopy-attenuated total reflection (FTIR-ATR) and X-ray photoelectron spectroscopy (XPS). Water contact angle, static protein adsorption and water flux experiments were used to evaluate the hydrophilicity, antifouling and water permeation properties of the membranes. It was found that the addition of PE-b-PEG increased the pore size of the obtained blend membranes. In the investigated range of PE-b-PEG content, the PEG blocks could not aggregate into obviously separated domains in membrane matrix. More importantly, PE-b-PEG could not only be retained stably in the membrane matrix during membrane formation, but also enrich at the membrane surface layer. Such stability and surface enrichment of PE-b-PEG endowed the blend membranes with improved hydrophilicity, protein absorption resistance and water permeation properties, which would be substantially beneficial to HDPE membranes for water treatment application.     

Preparation of high density polyethylene/polyethylene-block-poly(ethylene glycol) copolymer blend porous membranes via thermally induced phase separation process and their properties

<正>High density polyethylene(HDPE)/polyethylene-block-poly(ethylene glycol)(PE-b-PEG) blend porous membranes were prepared via thermally induced phase separation(TIPS) process using diphenyl ether(DPE) as diluent.The phase diagrams of HDPE/PE-b-PEG/DPE systems were determined by optical microscopy and differential scanning calorimetry(DSC).By varying the content of PE-b-PEG,the effects of PE-b-PEG copolymer on morphology and crystalline structure of membranes were studied by scanning electron microscopy(SEM) and wide angle X-ray diffraction(WAXD). The chemical compositions of whole membranes and surface layers were characterized by elementary analysis,Fourier transform infrared spectroscopy-attenuated total reflection(FTIR-ATR) and X-ray photoelectron spectroscopy(XPS).Water contact angle,static protein adsorption and water flux experiments were used to evaluate the hydrophilicity,antifouling and water permeation properties of the membranes.It was found that the addition of PE-b-PEG increased the pore size of the obtained blend membranes.In the investigated range of PE-b-PEG content,the PEG blocks could not aggregate into obviously separated domains in membrane matrix.More importantly,PE-b-PEG could not only be retained stably in the membrane matrix during membrane formation,but also enrich at the membrane surface layer.Such stability and surface enrichment of PE-b-PEG endowed the blend membranes with improved hydrophilicity,protein absorption resistance and water permeation properties,which would be substantially beneficial to HDPE membranes for water treatment application.     

热致相分离技术制备聚氨酯多孔膜的条件控制

采用自制的模具 ,利用热致相分离 (TIPS)的原理制备了聚氨酯 (PU)多孔膜 ,并重点研究了聚合物浓度对多孔膜的表面形貌、孔度大小、孔隙率和透湿率的影响 .在不同的聚合物浓度条件下制备的PU多孔膜的共同特征是底面 (与成膜平台接触面 )光滑平整 ,孔洞尺寸较小 ,为纳米级 ;而表面 (与空气接触的自由面 )的形貌结构较为复杂 ,但都有明显的孔洞出现 ,且孔洞的尺度大于底面 ,在微米级以上 .聚氨酯 1,4 二氧六环 (DO)形成的是上临界共溶温度 (UCST)体系 ,在发生相分离后底面与表面粗化时间的不同是导致形貌结构差异的主要原因 .改变冷台温度或调整DO H2 O的比例也会对PU多孔膜的孔度大小和形貌结构产生明显的影响     

热致相分离法制备乙烯-三氟氯乙烯共聚物微孔膜

通过热致相分离法制备了乙烯-三氟氯乙烯共聚物(ECTFE)微孔膜, 考察了ECTFE与不同溶剂的相互作用参数对ECTFE/溶剂体系的液液相区的影响, 通过相容性分析及对ECTFE微孔膜断面结构的观察, 筛选出能与ECTFE发生明显液液相分离的溶剂--邻苯二甲酸二乙酯(DEP). 热力学相图证明, ECTFE/DEP体系具有较宽的液液相分离区, 偏晶点所对应的ECTFE质量分数高达55%. 考察了冷却条件对\{ECTFE/DEP体系膜断面结构的影响, 结果表明, 膜断面孔径随着淬冷温度的降低而减小, 在淬冷温度为458 K时膜断面孔径随粗化时间的增加而增大.     

PREPARATION AND CHARACTERIZATION OF PVDF-HFP MICROPOROUS MEMBRANE BY TEMPLATE METHOD

Porous poly（vinylidene fluoride-co-hexafluoropropylene） （PVDF-HFP） membranes were successfully prepared using dibutyl phthalate （DBP）, polyvinylpyrrolidone （PVP-K30）, polyethylene glycol 200 （PEG200） as templates. SEM was used to examine the morphology of the PVDF-HFP porous membranes. It was found that these membranes have an asymmetric structure and the blends of PVDF-HFP/DBP formed nanoporous membranes, whereas the blends of PVDF- HFP/PVP-K30 formed ＂sponge-like＂ and microporous membranes. Moreover, the average pore size and porosity was about 0.3 μm and 48.7%, respectively. The crystallinity, thermal stability and mechanical strength of membranes were characterized by XRD, DSC, TGA and stress-strain tests. The results showed that the membranes are a crystals with excellent thermal stability. It was an effective way to regulate pore size and morphology of the PVDF-HFP membranes.     

Improved microfiltration and bacteria removal performance of polyethersulfone membranes prepared by modified vapor‐induced phase separation

Polyethersulfone (PES) microfiltration membranes were fabricated by a combined vapor‐induced phase separation and wet phase separation method. The effect of different non‐solvent additives in casting solution, ie, acetone, diethylene glycol, and triethylene glycol (TEG) was investigated on the membrane morphology and performance. Scanning electron microscopy images showed that the membrane containing TEG additive had a skinless symmetric structure with well interconnected pores. The permeability of the PES/PVP/TEG membranes increased by decreasing PES and TEG and increasing PVP concentration. Bacteria removal performance of the prepared membranes was investigated by the filtration of E. coli suspension. The membrane made from casting solution containing 15 wt.% PES, 16 wt.% PVP, and 20wt.% TEG showed a pure water flux of ~ 5370 L/m² h at low transmembrane pressure of 10 psi and 100% bacteria removal efficiency. The results of in vitro cytotoxicity test and cell viability assay showed non‐toxic nature of the prepared membranes.     

Fabrication of Cu(OH)<Subscript>2</Subscript> Nanowires Blended Poly(vinylidene fluoride) Ultrafiltration Membranes for Oil-Water Separation

Cu(OH)2 nanowires were prepared and incorporated into poly(vinylidene fluoride) (PVDF) to fabricate Cu(OH)2-PVDF ultrafiltration (UF) membrane via immersion precipitation phase inversion process.The effect of Cu(OH)2 nanowires on the morphology of membranes was investigated by X-ray photoelectron spectroscopy (XPS),Fourier transform infrared (FTIR) spectroscopy,atomic force microscopy (AFM),scanning electron microscopy (SEM) and X-ray diffraction (XRD) measurements.The results showed that all the Cu(OH)2-PVDF membranes had wider fingerlike pore structure and better hydrophilicity,smoother surface than pristine PVDF membrane due to the incorporation of Cu(OH)2 nanowires.In addition,water flux and bovine serum albumin (BSA) rejection were also measured to investigate the filtration performance of membranes.The results indicated that all the Cu(OH)2-PVDF membranes had high water flux,outstanding BSA rejection and excellent antifouling properties.It is worth mentioning that the optimized performance could be obtained when the Cu(OH)2 nanowires content reached 1.2 wt％.Furthermore,the membrane with 1.2 wt％ Cu(OH)2 nanowires showed outstanding oil-water emulsion separation capability.     

Fabrication of Cu(OH)_2 Nanowires Blended Poly(vinylidene fluoride) Ultrafiltration Membranes for Oil-Water Separation

Cu(OH)_2 nanowires were prepared and incorporated into poly(vinylidene fluoride)(PVDF) to fabricate Cu(OH)_2-PVDF ultrafiltration(UF) membrane via immersion precipitation phase inversion process. The effect of Cu(OH)_2 nanowires on the morphology of membranes was investigated by X-ray photoelectron spectroscopy(XPS), Fourier transform infrared(FTIR) spectroscopy, atomic force microscopy(AFM), scanning electron microscopy(SEM) and X-ray diffraction(XRD) measurements. The results showed that all the Cu(OH)_2-PVDF membranes had wider fingerlike pore structure and better hydrophilicity, smoother surface than pristine PVDF membrane due to the incorporation of Cu(OH)_2 nanowires. In addition, water flux and bovine serum albumin(BSA) rejection were also measured to investigate the filtration performance of membranes. The results indicated that all the Cu(OH)_2-PVDF membranes had high water flux, outstanding BSA rejection and excellent antifouling properties. It is worth mentioning that the optimized performance could be obtained when the Cu(OH)_2 nanowires content reached 1.2 wt%. Furthermore, the membrane with 1.2 wt% Cu(OH)_2 nanowires showed outstanding oil-water emulsion separation capability.     

Preparation of hydrophilic poly(vinylidene fluoride) membrane by in-situ grafting of N-vinyl pyrrolidone via a reactive vapor induced phase separation procedure

Increasing hydrophilicity of hydrophobic membrane is one of the strategies to improve its antifouling performance. Herein we report a procedure of reactive-vapor induced phase separation to prepare an N-vinyl pyrrolidone (NVP) modified poly(vinylidene fluoride) (PVDF) membrane to improve its hydrophilicity. PVDF solution containing NVP monomer was cast in ammonia water vapor atmosphere to prepare the modified membrane. During the process, PVDF was dehydrofluorinated by the reactive vapor of ammonia water to generate double bond of FC═CH, and then NVP was grafted. The degree of grafting modification and the microstructure evolution of the membrane were studied by adjusting the amount of NVP addition. A possible mechanism of membrane formation from crystallization gelling to non-crystallization gelling has been proposed to understand the morphology change from nodular sphere to bi-continuous microstructure with fibril matrix. It has been found that rising the degree of modification has changed the polymorph of PVDF from β to α crystalline phase, as well as turned the hydrophobic PVDF membrane into hydrophilic. Moreover, the modified membrane displayed obvious reduction in bovine serum albumin adsorption, suggesting improvement in anti-fouling performance. Therefore, our work provides an easy strategy to prepare hydrophilic PVDF membrane, which may have promising potential applications.     

非对称结构的CO2分离膜成膜过程的研究

采用干/湿相转化法制备了一系列非对称结构的气体分离膜。动态监测成膜过程的不同阶段,用傅立叶变换红外光谱仪来研究干相转化的蒸发过程,采用数码相机连续照相的方法,用光学显微镜来研究湿相转化的凝胶过程,并探讨成膜动力学过程对膜的最终结构及性能的影响。结果表明,对流蒸发和凝胶过程溶剂/非溶剂的交换速率对形成非对称结构的高渗透性能气体分离膜有着重要的影响。     

Improving hydrophilicity and protein antifouling of electrospun poly(vinylidenefluoride-hexafluoropropylene) nanofiber membranes

<正>Poly(vinylidenefluoride-hexafluoropropylene)(PVDF-HFP) nanofiber membranes with improved hydrophilicity and protein fouling resistance via surface graft copolymerization of hydrophilic monomers were prepared.The surface modification involves atmospheric pressure glow discharge plasma(APGDP) pretreatment followed by graft copolymerization of poly(ethylene glycol) methyl ether methacrylate(PEGMA).The success of the graft modification with PEGMA on the PVDF-HFP fibrous membrane is ascertained by X-ray photoelectron spectroscopy(XPS) and attenuated total reflectance Fourier transform infrared measurements(ATR-FTIR).The hydrophilic property of the nanofiber membranes is assessed by water contact angle measurements.The results show that the PEGMA grafted PVDF-HFP nanofiber membrane has a water contact angle of 0°compared with the pristine value of 132°.The protein adsorption was effectively reduced after PEGMA grafting on the PVDF-HFP nanofiber membrane surface.The PEGMA polymer grafting density on the PVDF-HFP membrane surface is measured by the gravimetric method,and the filtration performance is characterized by the measurement of water flux.The results indicate that the water flux of the grafted PVDF-HFP fibrous membrane increases significantly with the increase of the PEGMA grafting density.     

Effect of Polyvinylpyrrolidone on Separation Performance of Cellulose Acetate-Polysulfone Blend Membranes

Blend membranes comprising cellulose acetate and polysulfone (CA/PSf) were prepared through a solution casting method using a different concentration of polyvinylpyrrolidone (PVP) as the pore former. Fourier transform infrared spectroscopy (ATR-FTIR) was used to investigate structural properties of membranes. Membranes morphology and its thermal properties were characterized by scanning electron microscope (SEM) and thermogravimetric analysis (TGA). The strength of membranes was studied by mechanical stability. The effect of PVP concentration on separation performance of the prepared membranes was studied. The separation performance of prepared membranes was tested by using an aqueous solution of cadmium metal complexed with humic acid. The results showed that an increase in the PVP concentration in the cast film from 0 to 3 wt% increased the thermal stability, water content (%), pure water flux, and solute rejection. SEM results showed that the pore size decreased but the number of pores increased on an increase in the PVP concentration.     

Preparation and Evaluation of iPP/GO Microfiltration Membrane with Enhanced Antifouling Property

Isotactic polypropylene(iPP) and graphene oxide(GO), dispersed in dibutyl phthalate(DBP) and dioctyl phthalate(DOP), were blended to prepare organic-inorganic-blended microfiltration membranes using thermally induced phase separation(TIPS). These membranes were characterized by scanning electron microscopy(SEM), Fourier transform infrared spectroscopy(FTIR), contact angle measurements, mechanical properties, permeation tests, and porosity measurements. The morphology studied by SEM shows larger pores of the GO-blended membranes when compared to those of unmodified iPP membranes. Composite iPP/GO membranes achieve better performance in terms of water fluxes and pure water fluxes recovery ratio due to the hydrophilic nature of GO when compared with the pure iPP membranes. The addition of GO increases the permeability and the tensile strength by 352.98% and 123%, respectively, and also decreases the contact angle from 125° to 52.33°. We concluded that the composite membrane with 0.3% GO has the best antifouling ability of the membranes tested because it has the highest values of mean pore radius, porosity, and water flux observed in this study.     

Preparation of Hydrophilic UHMWPE Hollow Fiber Membranes by Chemically Bounding Silica Nanoparticles

In this work, ultra-high molecular weight polyethylene (UHMWPE) microfiltration hollow fiber membranes prepared via the thermally induced phase separation (TIPS) method were modified by chemically bounding hydrophilic silica (SiO_2) nanoparticles onto the surface to improve anti-fouling performance. A range of testing techniques including attenuated total reflection Flourier transformed infrared spectroscopy(ATR-FTIR), X-ray photoelectron spectroscopy (XPS), field emission scanning electron microscopy (FE-SEM), water contact angle, mechanical test,filtration and anti-fouling performance were carried out to discuss the influence of different modification conditions on the properties of the membranes. The prepared hollow fiber membranes display the significantly excellent performance when the vinyl trimethoxy silane (VTMS) concentration was 13%, the pH value of the hydrolyzate was 4 and the hydrolysis reaction time was 6 h. In particular, the hydrophilicity of modified membranes was improved effectively, resulting in the enhancement of membrane anti-fouling properties. The results of this work can be consulted for improving the anti-fouling performance of the UHMWPE microfiltration hollow fiber membrane applied in the field of water purification.     

Polysulfone Membranes via Thermally Induced Phase Separation

Polysulfone (PSF) membranes have gained great attention in the fields of ultrafiltration,microfiltration,and thin film composite membranes for nanofiltration or reverse osmosis.For the first time,it is proposed to fabricate PSF membranes via thermally induced phase separation (TIPS) process using diphenyl sulfone (DPSO2) and polyethylene glycol (PEG) as mixed diluent.DPSO2 is chosen as a crystallizable diluent,while PEG is considered in terms of molecular weight (Mw) and dosage.We systematically investigate the interactions between PSF,DPSO2 and PEG based on the simulation calculations and solubility parameter theory.It is inferred that DPSO2 has an excellent compatibility with PSF,and the addition of PEG results in the ternary system thermodynamically less stable and then facilitates its liquid-liquid (L-L) phase separation.SEM images indicate that cellular-like pores are obvious throughout the membrane when the PEG content in the mixed diluent is 25 wt％-35 wt％.We can facilely manipulate the pore size,water flux and mechanical properties of PSF membranes with the dosage of PEG-200,the Mw of PEG or the cooling rate.The successful application of TIPS can provide a new approach for structure manipulation and performance enhancement of PSF membranes.