大分子引发剂分子量对接枝聚合物基体的PDLC电光性能的影响

以可逆加成-断裂链转移(RAFT)、引发转移终止(iniferter)活性自由基聚合相结合的方法,用一步法制备了不同分子量的大分子引发剂RAFT-PS-co-PCMSI(MI),并通过紫外光聚合诱导相分离法制备了以接枝聚合物为基体的聚合物分散液晶(PDLC)膜.研究了不同分子量的MI对PDLC的微观形貌,关闭状态透光率,阈值电压,饱和电压以及记忆效应等方面的影响.研究表明,降低PDLC中MI的分子量,会使得液晶微滴粒径增大,阈值电压(Vth)、饱和电压(Vsat)减小,记忆效应、关闭状态透光率升高.     

机理转移法合成聚丁二烯-b-聚(甲基丙烯酸N,N-二甲氨基乙酯)两亲性嵌段共聚物

将活性负离子聚合与原子转移自由基聚合(ATRP)技术相结合,运用机理转移法制备了一种两亲性材料聚丁二烯-b-聚(甲基丙烯酸N,N-二甲氨基乙酯)(PB-b-PDMAEMA)嵌段共聚物.首先通过负离子聚合方法设计合成聚丁二烯,用环氧丙烷封端,2-溴异丁酰溴作酯化剂,合成具有活性端基溴的聚丁二烯大分子引发剂(PB-B r),再用其引发亲水性单体DMAEMA进行原子转移自由基聚合,聚合动力学证实了该聚合反应具有典型的活性/可控自由基聚合的特征.通过差示扫描量热法(DSC)研究嵌段共聚物的微相分离行为.制备的大分子引发剂及两亲性嵌段共聚物经凝胶色谱、红外和核磁表征证实了预定的结构.     

基团转移聚合制备侧链型联苯液晶高分子的研究

<正> 由具有刚性介晶结构同时又具有双键的单体进行加聚反应,是制备侧链型液晶高分子最方便的方法。大多采用甲基丙烯酸酯或丙烯酸酯类,聚合后形成乙烯型柔性主链,同时侧链上又带有刚性介晶相结构单元。以联苯类作为介晶相的液晶,由于具有稳定性好的优点,是目前应用得最广泛的一种液晶材料。Maganini用自由基聚合的方法进行了侧链型联苯液晶高分子的合成和研究。基团转移聚合作为一种新的加聚方式,为丙     

结合表面引发的原子转移自由基聚合和气/固反应制备CdS纳米微粒/聚苯乙烯核壳微球

结合表面引发的原子转移自由基聚合和气/固反应制备CdS纳米微粒/聚苯乙烯核壳微球. 以表面富含环氧基团的聚苯乙烯微球为基底, 利用开环反应在水相中一步接枝表面引发剂, 然后在聚苯乙烯微球表面引发甲基丙烯酸镉的原子转移自由基聚合, 最后通入H2S气体原位生成CdS纳米微粒. 生成的CdS纳米微粒复合的核壳微球呈草莓状形貌, 且具有良好的光学性能.     

{4-[4-（对硝基苯甲酰基）苯硫基]苯}苯基碘鎓六氟磷酸盐的合成与光引发性能测试

紫外光固化反应按机理分为自由基固化、阳离子固化以及自由基-阳离子混杂固化.自由基-阳离子混杂固化是指在同一体系里同时通过自由基聚合和阳离子聚合而发生的固化[1].混杂聚合结合了各个聚合反应的优点,表现出很好的协同效应.杂化光引发剂被设计成既能引发自由基聚合又能引发阳离子聚合的光引发剂.据报道,目前常见的杂化光引发剂主要有碘鎓盐类和苯基膦二苯甲酮类[2].     

聚合物分散液晶(PDLC)材料的光聚合反应

以Ar+激光器为光源, 采用虎红、 N-苯基甘氨酸、二季戊四醇羟基五丙烯酸酯和乙烯基吡咯烷酮分别作为光引发剂、共引发剂、预聚物和稀释剂, 与液晶材料TEB30A结合, 通过光聚合反应, 制备了聚合物分散液晶(PDLC), 用紫外光谱和荧光光谱对其反应机理进行了分析. 实验结果表明, PDLC是通过光引发剂吸收光子能量后与共引发剂相互作用, 形成自由基中间体并引发聚合反应, 使预聚物与液晶产生相分离形成的.     

含有仲氨基团的甲基丙烯酸酯单体的原子转移自由基聚合研究

聚(4-甲基丙烯酰氧基-2,2,6,6-四甲基哌啶氮氧自由基)(PTMA)是一种具有应用前景的锂离子电池正极材料,一般通过2,2,6,6-四甲基哌啶醇-4-甲基丙烯酸酯(TMPM)的自由基聚合及进一步氧化来制备.但是TMPM的可控自由基聚合受制于其分子中的仲氨基团.通过对不同的引发剂和催化体系TMPM的原子转移自由基聚合(ATRP)进行了研究,得到了TMPM最优的ATRP聚合条件,为合成具有不同分子量或拓扑结构的自由基聚合物奠定了基础.     

由平面合成聚合物刷--表面引发原子转移自由基聚合研究进展

原子转移自由基聚合反应(ATRP)是实现活性聚合,获得可控聚合物的一种有效途径。通过表面引发原子转移自由基聚合,在材料表面合成聚合物刷,是改变材料表面特征的有效方法。本文综述了表面引发原子转移自由基聚合合成聚合物刷及其最新进展。     

二茂铁四氟硼酸盐的阳离子光引发性能的研究

制备并研究了[CpFeCp]BF4作为阳离子光引发剂在高压汞灯下引发环氧类预聚物的光引发活性.发现其在紫外及可见光区均有较强吸收(λm=355nm、620nm);对环氧类预聚物,具有优良的光引发活性,感度值可达41.8mJ/cm2,优于其它的阳离子光引发剂;[CpFeCp]BF4的最佳使用浓度为3%(质量分数)左右,由于光照后仍有强后聚合活性,发现其在较低浓度(质量分数1%)引发后放置,仍可使聚合完全;同其它的阳离子光引发剂相比,[CpFeCp]BF4制备简单,非常有应用价值.     

含C60的苯乙烯和丙烯酰胺共聚物的合成与表征

在高分子领域中,C60的高分子化一直是C60材料化的一个重要途径.迄今为止,制备含C60高分子的方法有以下几种:(1)采用自由基引发剂、阴离子引发剂或阳离子引发剂引发C60与烯类单体共聚[1,2];(2)对C60进行表面修饰,引入可聚合官能团,合成含C60的单体,随后聚合成含C60的高分子[3];(3)制备出带有功能基团的高分子前体,再通过功能化反应将C60引入高分子链[4～9].     

SYNTHESIS AND PROPERTIES OF POLYURETHANE ACRYLATE/EPOXY RESIN INTERPENETRATING POLYMER NETWORKS

In this paper, a series of interpenetrating polymer networks (IPNs) based on polyurethane acrylate and epoxy resin was prepared by simultaneous photoinitiating by both free-radical and cationic polymerization. The effects of the polyurethane acrylate prepolymer's molecular weight, various components ratio and polymerization methods on IPN's dynamic mechanical and mechanical properties were investigated.     

Study of smectic elastomer films under uniaxial stress

We study the mechanical properties of free-standing films of smectic liquid crystalline elastomers. Macroscopically ordered elastomer films of submicrometer thickness are prepared from freely suspended smectic A polymer films by photo crosslinking. The deformation characteristics depend criticically on the sample composition, in particular on the density of mesogenic side chains at the siloxane backbone. In materials where the siloxane backbone is only partially substituted (dilute systems), a uniaxial stretching of the films in the layer plane is accompanied by a shrinkage of the smectic layers. This layer shrinkage is to only a minor extent achieved by the induction of a molecular tilt. We conclude that the layer compression modulus (enthalpic contribution to elasticity) in such materials is very weak. In materials with a fully substituted backbone (homopolymers), the smectic layer thickness is preserved under uniaxial stress in the layer planes.     

Study of smectic elastomer films under uniaxial stress

We study the mechanical properties of free-standing films of smectic liquid crystalline elastomers. Macroscopically ordered elastomer films of submicrometer thickness are prepared from freely suspended smectic A polymer films by photo crosslinking. The deformation characteristics depend criticically on the sample composition, in particular on the density of mesogenic side chains at the siloxane backbone. In materials where the siloxane backbone is only partially substituted (dilute systems), a uniaxial stretching of the films in the layer plane is accompanied by a shrinkage of the smectic layers. This layer shrinkage is to only a minor extent achieved by the induction of a molecular tilt. We conclude that the layer compression modulus (enthalpic contribution to elasticity) in such materials is very weak. In materials with a fully substituted backbone (homopolymers), the smectic layer thickness is preserved under uniaxial stress in the layer planes.     

Tuning the physical properties of a nematic liquid crystal elastomer actuator

In this report we demonstrate the ability to tune the physical properties of a liquid crystal elastomer (LCE) by varying the amount and type of crosslinking within the elastomer network. LCE films composed of a single mesogenic compound were capable of uniaxial contraction when thermally actuated through the nematic to isotropic phase of the material. We probed the physical properties of the LCE films while varying the amount and concentration of two crosslinking agents and measured actuation strains of 10-35%, elastic moduli of 3-14 MPa, and transition temperatures ranging between 75 and 60°C. The viscous losses of the elastomers and the estimated work capable of being produced by the films were also evaluated. The ability to tune the physical properties of the LCE films allows for a wide range of applications including robotics, microelectromechanical systems (MEMS), shape-changing membranes, and/or microfluidics.     

Crosslinking of a polyacrylate bearing a spiroorthoester pendant group with mixtures of diglycidyl ether of bisphenol A and phosphorus‐containing glycidyl derivatives

The cationic crosslinking of a polyacrylate bearing a spiroorthoester pendant group with mixtures of diglycidyl ether of bisphenol A and three phosphorus‐containing glycidyl derivatives was carried out with ytterbium triflate as an initiator. The curing process was monitored with Fourier transform infrared spectroscopy. The thermomechanical and thermogravimetric properties were evaluated. The glass transition temperatures of the obtained materials were, in general, above 100 °C. The incorporation of phosphorus into the network increased the limiting oxygen index values, thus improving the flame retardancy of the materials. During crosslinking, all the crosslinked polymers showed slight shrinkage that was much lower than that observed in conventional epoxy resins. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 1920–1930, 2007     

Tuning the physical properties of a nematic liquid crystal elastomer actuator

In this report we demonstrate the ability to tune the physical properties of a liquid crystal elastomer (LCE) by varying the amount and type of crosslinking within the elastomer network. LCE films composed of a single mesogenic compound were capable of uniaxial contraction when thermally actuated through the nematic to isotropic phase of the material. We probed the physical properties of the LCE films while varying the amount and concentration of two crosslinking agents and measured actuation strains of 10–35%, elastic moduli of 3–14 MPa, and transition temperatures ranging between 75 and 60°C. The viscous losses of the elastomers and the estimated work capable of being produced by the films were also evaluated. The ability to tune the physical properties of the LCE films allows for a wide range of applications including robotics, microelectromechanical systems (MEMS), shape‐changing membranes, and/or microfluidics.     

A robust and efficiently reprocessable poly(dimethylsiloxane) elastomers enhanced by self-catalysis Zn(II)-ligand bonds and silyl ethers

In recent years, as an emerging dynamic bonding, silyl ether linkages have been concerned and applied. However, the reprocessability of vitrimers based on it is far from satisfactory because of the inactive dynamic exchange reaction. At the same time, the mechanical properties of polysiloxane elastomers are poor because of the high flexibility of polysiloxane molecular chains and weak intermolecular forces. Herein, we have successfully synthesized a PDMS elastomer incorporating Zn(II)-amine coordination bonds as sacrificial units, which are crosslinked through dynamic silyl ether linkages. Importantly, the presence of Zn ions promotes the exchange between the silyl ether linkages and hydroxyl groups. The elastomers exhibited excellent mechanical properties (35 times improvement in toughness) and outstanding reprocessability. The mechanical property recovery of the PDMS elastomers reached approximately 90% after four reprocessing cycles. Meanwhile, small-molecule simulation experiments were conducted to verify the significant catalytic effect of Zn (II) ions as Lewis acid catalysts on the exchange reaction of silyl ether linkages and hydroxyl groups. In a word, this work provides a facile strategy to simultaneously enhance the mechanical properties and reprocessing performance of silyl ether-linked polysiloxane elastomers.     

Independent Control of Elastomer Properties through Stereocontrolled Synthesis

In most synthetic elastomers, changing the physical properties by monomer choice also results in a change to the crystallinity of the material, which manifests through alteration of its mechanical performance. Using organocatalyzed stereospecific additions of thiols to activated alkynes, high‐molar‐mass elastomers were isolated via step‐growth polymerization. The resulting controllable double‐bond stereochemistry defines the crystallinity and the concomitant mechanical properties as well as enabling the synthesis of materials that retain their excellent mechanical properties through changing monomer composition. Using this approach to elastomer synthesis, further end group modification and toughening through vulcanization strategies are also possible. The organocatalytic control of stereochemistry opens the realm to a new and easily scalable class of elastomers that will have unique chemical handles for functionalization and post synthetic processing.     

Reliable Condensation Curing Silicone Elastomers with Tailorable Properties

The long-term stability of condensation curing silicone elastomers can be affected by many factors such as curing environment, cross-linker type and concentration, and catalyst concentration. Mechanically unstable silicone elastomers may lead to undesirable application failure or reduced lifetime. This study investigates the stability of different condensation curing silicone elastomer compositions. Elastomers are prepared via the reaction of telechelic silanol-terminated polydimethylsiloxane (HO-PDMS-OH) with trimethoxysilane-terminated polysiloxane ((MeO)₃Si-PDMS-Si(OMe)₃) and ethoxy-terminated octakis(dimethylsiloxy)-T8-silsesquioxane ((QM^OEt)₈), respectively. Two post-curing reactions are found to significantly affect both the stability of mechanical properties over time and final properties of the resulting elastomers: Namely, the condensation of dangling and/or unreacted polymer chains, and the reaction between cross-linker molecules. Findings from the stability study are then used to prepare reliable silicone elastomer coatings. Coating properties are tailored by varying the cross-linker molecular weight, type, and concentration. Finally, it is shown that, by proper choice of all three parameters, a coating with excellent scratch resistance and electrical breakdown strength can be produced even without an addition of fillers.     

主链型液晶聚硅氧烷聚氨酯的合成及性质

合成了主链型联苯类及氧化偶氯苯类液晶聚硅氧烷聚氨酯弹性体，采用红外光谱，示差扫描量热，动态粘弹谱及带热台偏光显微镜等方法对聚合物进行了表征，讨论了它们的结构与性能．研究结果表明，这一系列多嵌段聚氨酯多数是向列型的液晶高分子聚合物，液晶相的形成同嵌段聚氨酯样品的软硬段相互作用有着密切的联系