Determination of amobarbital and secobarbital in plasma samples using micellar liquid chromatography

A new liquid chromatographic procedure for the determination of amobarbital and secobarbital in plasma samples is proposed. The method uses a Spherisorb octadecylsilane ODS-2 C(18) analytical column, a guard column of similar characteristics and 0.04 M CTAB solution buffered at pH 7.5 containing 3% 1-propanol as micellar mobile phase. The UV detection was carried out at 250 nm. Butabarbital was used as internal standard. Plasma samples preparation only required adequate dilution with the mobile phase before injection into the chromatographic system. The limits of detection were 0.2 and 0.4 mg/L for amobarbital and secobarbital, respectively. The proposed method allows the determination of amobarbital and secobarbital in plasma at therapeutic levels.     

Determination of procaine and tetracaine in plasma samples by micellar liquid chromatography and direct injection of sample

Summary A liquid chromatographic procedure is proposed for the determination of procaine and tetracaine in plasma samples with direct injection. The method uses a Spherisorb octadecylsilane ODS-2 C₁₈ analytical column and a micellar mobile phase containing 0.15 M sodium dodecyl sulphate, 0.5% triethylamine at pH 2.5 and 10% propanol. The UV detection was carried out at 300 nm. Plasma sample preparation required only adequate dilution with the mobile phase before injection into the chromatographic system. The proposed method allows the determination of procaine and tetracaine in plasma at therapeutic levels.     

Determination of paraquat in human blood plasma using reversed-phase ion-pair high-performance liquid chromatography with direct sample injection

This report describes the determination of paraquat (PQ) in human blood plasma samples by a direct-injection reversed-phase ion-pair chromatographic method. Blood plasma filtrate was injected directly into the LiChrospher® RP-18 alkyl-diol silica (ADS) precolumn integrated in a column switching system using a mixture of 3% 2-propanol and 10 mM sodium octane sulfonate (SOS) in a 0.05 M phosphate buffer (pH 2.8). After washing with this phase, the ADS precolumn was back-flushed with the analytical mobile phase consisting of 40% of methanol and 10 mM SOS in a 0.05 M phosphate buffer (pH 2.8) at a flow rate of 1.0 ml min⁻¹, in order to carry the analyte to a conventional reversed-phase analytical column, where the separation of PQ was achieved and finally detected by UV at 258 nm. The recoveries of PQ from human blood plasma samples ranged between 95.0 and 99.5% at nine different concentrations (from 0.05 to 3.00 μg of PQ ml⁻¹) with coefficients of variation <2.5% (n=3). The precision expressed as relative standard deviation was below 3.5% for between-day and below 4.3% for within-day measurements (n=5). The detection limit (signal-to-noise ratio, S/N>3) was 0.005 μg ml⁻¹ with an injection volume of 200 μl. The proposed method is promising for the identification and quantification of PQ at low concentration levels and is suitable for its analysis in human blood plasma samples from intentional or accidental poisonings cases with a sample throughput of 5 samples per hour.     

Reversed-phase high-performance liquid chromatographic analysis of atenolol enantiomers in plasma after chiral derivatization with (+)-1-(9-fluorenyl)ethyl chloroformate.

A sensitive high-performance liquid chromatographic method for the determination of the enantiomers of atenolol in rat plasma has been developed. Racemic atenolol and practolol (internal standard) were extracted from alkalinized plasma (pH 12) into dichloromethane containing 3% (v/v) heptafluoro-1-butanol, and the organic layer was evaporated. The samples were derivatized with (+)-1-(9-fluorenyl)ethyl chloroformate at pH 8.5 for 30 min. After removal of excess reagent, the diastereomers were extracted into dichloromethane. The diastereomers were separated on a Microspher C18 column (3 microns) with a mobile phase of acetonitrile-sodium acetate buffer (0.01 M, pH 7) (50:50, v/v) at a flow-rate of 0.8 ml/min. Fluorescence detection (lambda ex = 227 nm, lambda em = 310 nm) was used. When 100 microliters of plasma were used, the quantitation limit was 10 ng/ml for the atenolol enantiomers. The assay was applied to measure concentrations of atenolol enantiomers in plasma after intravenous administration of racemic atenolol to rats.     

High-performance liquid chromatographic determination of morphine and its 3- and 6-glucuronide metabolites: improvements to the method and application to stability studies

Improvements to previously reported methods for the determination of morphine, morphine-3-glucuronide (M3G) and morphine-6-glucuronide (M6G) in human plasma are described. The improved methods involve the use of a solid-phase extraction cartridge and a chromatographic system which uses paired-ion reversed-phase high-performance liquid chromatography with a radially compressed column. Only one cartridge is used to prepare each sample for chromatography and each cartridge may be used for at least fourteen 1-ml plasma samples. The recovery is greater than 85%. The improvements to the method of sample pretreatment and in the chromatographic conditions have allowed determination of morphine, M3G and M6G in human plasma down to 13.3 nmol/l (coefficient of variation = 9.3%), 108 nmol/l (6.6%) and 41 nmol/l (6.7%), respectively, using ultraviolet detection alone. It was shown that all three compounds were stable in plasma for up to 101 weeks when stored at -20 degrees C.     

Determination of paracetamol and its four major metabolites in mouse plasma by reversed-phase ion-pair high-performance liquid chromatography.

A reversed-phase ion-pair high-performance liquid chromatographic method has been used for the separation of paracetamol and its four major metabolites (glucuronide, sulphate, cysteine and mercapturate conjugates) in mouse plasma samples. An ODS column was used and the mobile phase consisted of an aqueous solution of 0.01 M tetrabutylammonium chloride and 0.01 M Tris buffered to pH 5.0 with phosphoric acid, with methanol as the organic solvent. The gradient elution started with 30% methanol. After a delay of 0.5 min the methanol concentration was increased linearly to 75% over 7.5 min. The column was returned to the initial conditions after a delay of 1 min. A methanol solution of theophylline was added to the mouse plasma sample, centrifuged and immediately injected into the chromatographic system. The advantages of this method include good and rapid separation (last metabolite detected at 6.86 min), well resolved peaks, only a small amount of sample required for assay, adequate precision (no coefficient of variation was greater than 10% for paracetamol metabolites) and a high sensitivity (particularly for unchanged paracetamol and the cysteine conjugate).     

Quantitation of agmatine by liquid chromatography with laser-induced fluorescence detection

A high performance liquid chromatography (HPLC) method is described for the determination of agmatine, an endogenous neuromodulator. The method involves pre-column derivatization of the sample with a fluorescent tagging reagent, 7-fluoro-4-nitrobenzoxadiazole (NBD-F). The resulting agmatine derivative is stable and can be readily extracted into ethyl acetate at pH 8.5. The extraction enhances the quantification of low level agmatine because it eliminates chromatographic peaks caused by endogenous amino acids. The HPLC separation is carried out on a C₈ reversed phase column and completed in less than 10 min. With laser-induced fluorescence (LIF) detection, the detection limit is 5×10⁻⁹ M agmatine. Method precision (coefficient of variation) is 5% for agmatine in human plasma at the sub-μM level. This method has been validated by determination of agmatine in biological samples including human plasma and rat brain and stomach tissues.     

Simultaneous determination of free and bound adriamycin, adriamycinol, adriamycinone and duanorubicin in plasma using column-switching technique and protein-coated pre-columns

Adriamycin, adriamycinol, adriamycinone and duanorubicin were simultaneously determined by the development of an on-line plasma clean-up system. A short protein-coated Lichrosorb, RP-8, RP-2, CN and muBondapak phenyl as well as ODS silica have been examined for their performance as pre-columns. The drugs and metabolites were separated from weakly retained plasma components through two steps; phosphate buffer saline, pH 7.4 and 15% acetonitrile in 0.1 M sodium dihydrogen phosphate, pH 3. The chromatographic conditions were: ODS/TM column, flow rate 1 ml/min, 35% acctonitrile in 0.1 M sodium dihydrogen phosphate (pH 3) containing 0.3% heptafluorobutyric acid as mobile phase. The detection was carried out using fluorescence monitor operated at an emission 555 nm and excitation 460 nm. Good resolution was obtained within 13 min. This method is reproducible for analysis of drugs and metabolites (99.3-100.1%, CV < 2%) in plasma.     

Quantitation of clobazam in human plasma using high-performance liquid chromatography.

A rapid and simple reversed-phase high-performance liquid chromatographic (HPLC) method for the determination of clobazam concentrations in human blood samples is developed and validated. Solid-phase column extraction is performed to clean up blood samples before running the analytical HPLC system. The chromatography is isocratic with a mobile phase consisting of acetonitrile (20%, v/v), methanol (23%, v/v), and 0.1 M potassium hydrogen phosphate buffer (pH 3.6; 57%, v/v) at a constant flow rate of 2 mL/min. Clobazam is detected at 226 nm. Chromatography is completed within less than 25 min. The recovery rate is greater than 95% and linear over a wide range of drug concentrations. The intra-assay coefficient of variation percentage varies between 4.3 and 12. This method is used for therapeutic drug monitoring in patients undergoing antiepileptic therapy with clobazam. Plasma levels of clobazam ranged from 21 to 663 ng/mL. Other antiepileptic compounds, such as clonazepam and phenobarbital, did not interfere with the detection of clobazam.     

Optimization via experimental design of an SPE-HPLC-UV-fluorescence method for the determination of valsartan and its metabolite in human plasma samples

A chemometric approach was applied for the optimization of the extraction and separation of the antihypertensive drug valsartan and its metabolite valeryl-4-hydroxy-valsartan from human plasma samples. Due to the high number of experimental and response variables to be studied, fractional factorial design (FFD) and central composite design (CCD) were used to optimize the HPLC-UV-fluorescence method. First, the significant variables were chosen with the help of FFD; then, a CCD was run to obtain the optimal values for the significant variables. The measured responses were the corrected areas of the two analytes and the resolution between the chromatographic peaks. Separation of valsartan, its metabolite valeryl-4-hydroxy-valsartan and candesartan M1, used as internal standard, was made using an Atlantis dC18 100 mm x 3.9 mm id, 100 angstroms, 3 microm chromatographic column. The mobile phase was run in gradient elution mode and consisted of ACN with 0.025% TFA and a 5 mM phosphate buffer with 0.025% TFA at pH 2.5. The initial percentage of ACN was 32% with a stepness of 4.5%/min to reach the 50%. A flow rate of 1.30 mL/min was applied throughout the chromatographic run, and the column temperature was kept to 40+/-0.2 degrees C. In the SPE procedure, experimental design was also used in order at achieve a maximum recovery percentage and extracts free from plasma interferences. The extraction procedure for spiked human plasma samples was carried out using C8 cartridges, phosphate buffer (pH 2, 60 mM) as conditioning agent, a washing step with methanol-phosphate buffer (40:60 v/v), a drying step of 8 min, and diethyl ether as eluent. The SPE-HPLC-UV-fluorescence method developed allowed the separation and quantitation of valsartan and its metabolite from human plasma samples with an adequate resolution and a total analysis time of 1 h.     

Automated high-performance liquid chromatographic method for the simultaneous determination of cefotiam and delta 3-cefotiam in human plasma using column switching.

An automated high-performance liquid chromatographic method using column switching was established for the simultaneous determination of cefotiam (I) and delta 3-cefotiam (II) in human plasma after oral administration of cefotiam hexetil dihydrochloride. The method allowed the determination of analytes in plasma by the direct injection of diluted specimen with phosphate buffer. The analytes were enriched onto the C18 short pretreatment column by 0.05 M phosphate buffer (pH 7.7), while proteins and endogenous hydrophilic substances in plasma were washed off to waste. The enriched analytes were then back-flushed onto the analytical C18 column, separated by a mixture of 0.05 M phosphate buffer (pH 7.7)-acetonitrile (88:12, v/v) and detected by the ultraviolet absorbance at 254 nm. Recoveries from spiked plasma were quantitative, and the coefficients of variation were below 4%. The lower detection limits in plasma were 10 ng/ml for both I and II. Concentrations of I and II in plasma determined by the present method were in good agreement with those obtained by the conventional deproteinization method.     

Elimination of caffeine interference in high-performance liquid chromatographic determination of cotinine in human plasma.

A high-performance liquid chromatographic method with ultraviolet photometric detection for the determination of cotinine in human plasma was described. The use of a 30-cm reversed-phase column and of a mobile phase consisting of water-methanol-0.1 M sodium acetate-acetonitrile (72:21:5.6:1.4, v/v), pH 4.1, eliminated caffeine interference. A simplified solid-phase extraction procedure was also performed for plasma samples.     

Direct determination of mitoxantrone and its mono- and dicarboxylic metabolites in plasma and urine by high-performance liquid chromatography

The simultaneous isolation and determination of mitoxantrone (Novantrone) and its two known metabolites (the mono- and dicarboxylic metabolites) were carried out using a high-performance liquid chromatographic (HPLC) system equipped with an automatic pre-column-switching system that permits drug analysis by direct injection of biological samples. Plasma or urine samples were injected directly on to an enrichment pre-column flushed with methanol-water (5:95, v/v) as the mobile phase. The maximum amount of endogenous water-soluble components was removed from biological samples within 9 min. Drugs specifically adsorbed on the pre-column were back-flushed on to an analytical column (Nucleosil C18, 250 X 4.6 mm I.D.) with 1.6 M ammonium formate buffer (pH 4.0) (2.5% formic acid) containing 20% acetonitrile. Detection was effected at 655 nm. Chromatographic analysis was performed within 12 min. The detection limit of the method was about 4 ng/ml for urine and 10 ng/ml for plasma samples. The precision ranged from 3 to 11% depending on the amount of compound studied. This technique was applied to the monitoring of mitoxantrone in plasma and to the quantification of the unchanged compound and its two metabolites in urine from patients receiving 14 mg/m2 of mitoxantrone by intravenous infusion for 10 min.     

An HPLC Method for Determination of Atropine in Human Plasma

Abstract

A development of a high performance liquid chromatographic method for the determination of atropine in human plasma is presented. Atropine is extracted from plasma basified with 0. 1N sodium hydroxide using chloroform, subsequently subjected to base hydrolysis, followed by derivatization of the generated tropic acid with 4-bromomethyl-7-methoxycoumarin (Br-Mmc). The derivative produced has a strong blue fluorescence at excitation wavelength of 328 nm and emission cutoff filter of 389 nm. d1-Mandelic acid as internal standard (I. S.) was added after hydrolysis. The chromatographic separation was achieved on a reversed phase ODS column with a mobile phase of 33% acetonitrile in 0. 01M ammonium phosphate buffer (pH 5). The minimum quantitative limit was 125 ng/ml of plasma.     

High Performance Liquid Chromatographic Determination of Oxamniquine in Plasma Samples

Abstract

A sensitive and reliable liquid chromatographic assay procedure for the quantitation of oxamniquine in plasma or urine was developed. Chromatographic separation was achieved on a reversed-phase phenyl colum using U.V. Detection at 254 nm. The eluting solvent was the mixture of 0.05 M acetate buffer pH 5 and acetonitrile (3:7). With this mobile phase the drug and its external standard were well separated from the interference of the blank samples. The average recovery of oxamniquine from 3 or more replicate dog plasma samples of different concentration (0.125 ? 4.00 μg/ml) was 95.5% and its coefficient of variation was 4.17%. The reproducibility of the assay was confirmed by the analysis of variance test for the slopes of the three standard plots obtained from plasma samples at three different occasions (F=4.2, p > 0.01). The detection limit for plasma samples was approximately 20 ng/ml. The method was applied to measure the plasma level vs, time profile of this drug following a single bolus intravenous dose of 16 mg/kg to a dog.     

Determination of the catechol-O-methyltransferase inhibitor Ro 40-7592 in human plasma by high-performance liquid chromatography with coulometric detection.

A sensitive and specific high-performance liquid chromatographic method has been developed to measure the catechol-O-methyl-transferase (COMT) inhibitor 3,4-dihydroxy-4'-methyl-5-nitrobenzophenone (Ro 40-7592) in human plasma. The compound and the internal standard were extracted from plasma at pH 2 with n-butyl chloride-ethyl acetate (95:5, v/v). The extract was chromatographed on a reversed-phase column (Hypersil ODS, 5 microns) using a mixture of phosphate buffer (0.05 M, pH 2), methanol and tetrahydrofuran (45:55:5, v/v/v) as the mobile phase. Long-retained components were removed from the system by means of a simple column-switching system. Quantification of the catechol-O-methyltransferase inhibitor was performed by means of coulometric detection (0.1 V). The limit of quantification was about 1 ng/ml, using a 1-ml specimen of plasma. The recovery from human plasma was greater than 88%. The mean inter-assay precision was 5.3% in the range 2.5-1000 ng/ml. Linearity of the standard curve was obtained in the concentration range 2.5-500 ng/ml. The catechol-O-methyltransferase inhibitor was stable in human plasma when stored for six months at -20 degrees C and for 24 h at room temperature. The practicability of the new method was demonstrated by the analysis of more than 400 plasma samples from a tolerance study performed in human volunteers.     

High-performance liquid chromatographic determination of navelbine in MO4 mouse fibrosarcoma cells and biological fluids.

A high-performance liquid chromatographic method is described for separating and determining navelbine and possible metabolites in plasma, cell culture medium and MO4 cells. Navelbine is extracted from these fluids by ion-pair extraction with sodium octylsulphate as the counter-ion at pH 3. The system uses a cyano column as the stationary phase and a mobile phase of acetonitrile-0.12 M phosphate buffer (pH 3) (60:40, v/v). Application of the method to a study of the pharmacokinetic behaviour of navelbine in MO4 mouse fibrosarcoma cells is reported.     

Simultaneous analysis of classical neuroleptics, atypical antipsychotics and their metabolites in human plasma

A high-performance liquid chromatographic method has been developed for the simultaneous determination of classical neuroleptics (chlorpromazine, haloperidol, loxapine and clotiapine), atypical antipsychotics (clozapine, quetiapine and risperidone) and their active metabolites (N-desmethylclozapine, clozapine N-oxide and 9-hydroxyrisperidone) in human plasma. Separation was obtained by using a C8 reversed-phase column and a mobile phase composed of 70% aqueous phosphate buffer containing triethylamine at pH 3.0 and 30% acetonitrile. The UV detector was set at 238 nm and amitriptyline was used as the internal standard. A careful pre-treatment procedure of plasma samples was developed, using solid-phase extraction with cyanopropyl cartridges, which gives high extraction yields (>or=93%). The limits of quantitation (LOQ) were always lower than 2.6 ng mL-1 and the limits of detection (LOD) were always lower than 0.9 ng mL-1 for all analytes. The method was applied with success to plasma samples from schizophrenic patients undergoing polypharmacy with two or more different antipsychotics. Precision data and accuracy results were satisfactory and no interference from other central nervous system (CNS) drugs was found. Hence the method is suitable for the therapeutic drug monitoring (TDM) of the analytes in psychotic patients' plasma.     

Liquid chromatographic determination of barbiturates using a hollow-fibre membrane for postcolumn pH modification

A sensitive, high-performance liquid chromatographic method is described for the determination of barbiturates by postcolumn pH modification. The barbiturates (barbital, phenobarbital, hexobarbital and amobarbital) were separated on a C18 column using a mixture of methanol and water as an eluent. Then the pH of the eluent was raised to 10 by introducing ammonia or ammonium ion through a sulphonated hollow-fibre membrane inserted between the column and the detector. The detection was based on the primary ionized barbiturates at 240 nm. At barbiturate concentrations of 2.0 micrograms/ml, the within- and between-experiment precision (relative standard deviation) was 0.65-3.28 and 0.76-1.90%, respectively. The limits of detection were about 0.5-2.5 ng at a signal-to-noise ratio of 3. The method was applied to the determination of amobarbital in saliva.     

High-performance liquid chromatographic determination of glipizide in human plasma and urine

A sensitive and selective high-performance liquid chromatographic method for determination of intact glipizide in human plasma or urine has been developed. The plasma and urine samples were acid-buffered, before tolbutamide was added as internal standard. The samples were extracted with benzene, and the organic layer was evaporated to dryness. The residue was dissolved in equilibrated mobile phase (acetonitrile-0.01 M phosphate buffer pH 3.5, 35:65), and an aliquot of 20 microliters was chromatographed on a Spherisorb ODS reversed-phase column. Quantitation was achieved by monitoring the ultraviolet absorbance at 275 nm. The response was linear (0-1000 ng/ml) and the detection limit was 5-10 ng/ml in plasma or urine. The within-assay variation was less than or equal to 10%. No interferences from metabolites or endogenous constituents were observed. The utility of the assay was demonstrated by determining glipizide in samples from a diabetic subject receiving a therapeutic dose of 5 mg of the drug.