Liquid Chromatographic Determination of Glyoxal and Methylglyoxal from Serum of Diabetic Patients using Meso‐Stilbenediamine as Derivatizing Reagent

Abstract

Meso‐stilbenediamine has been used as derivatizing reagent for liquid chromatographic (LC) determination of glyoxal (Go), methylglyoxal (MGo), and dimethylglyoxal (DMGo) at pH 3. Liquid chromatographic elution and separation was carried out from the column Kromasil 100 C‐18, 5 µm (15×0.46 mm i.d.) with methanol: water:acetonitrile (59:40:1, v/v/v) with a flow rate of 1 mL/min and ultraviolet detection at 254 nm. The linear calibration curves were obtained for Go, MGo, and DMGo within 0.97–4.86 µg/mL, 1.52–7.6 µg/mL, and 1.41–7.08 µg/mL with detection limits of 48 ng/mL, 76 ng/mL, and 70.8 ng/mL, respectively. The method was applied for the determination of Go and MGo from serum of patients suffering from diabetes and ketosis. The amounts of Go and MGo found were 0.150–0.260 µg/mL and 0.160–0.270 µg/mL with coefficient of variation (C.V.) 2.6–4.7% and 2.5–4.6%, respectively. The results obtained were compared with normal subjects with Go and MGo contents of 0.025–0.065 µg/mL and 0.030–0.070 µg/mL with C.V 1.5–4.9% and 1.6–4.8% in the serum.     

Reverse Homogeneous Liquid–Liquid Extraction as a Miniaturized Method for Extraction of Aflatoxins from Pistachio and Wheat and LC Post-column Derivatization-Fluorescence Detection

A rapid and simple quantitative method for the simultaneous determination of the four aflatoxins (AFs) B1, B2, G1 and G2 was developed using reverse homogeneous liquid–liquid extraction (RHLEE) and HPLC post-column derivatization-fluorescence (HPLC-FL) detection. The method based on the rapid extraction of AFs from a methanolic sample into chloroform after addition of water containing KBr, with a method we called reverse homogeneous liquid–liquid extraction. Recoveries were in the range of 88–125% and the limits of detection were between 0.001–0.042 ng g^?1 for different AFs. Wheat and pistachio were chosen for the analysis of real samples and the method was also successfully applied to a FAPAS^® TEST MATERIAL (T04151).     

Magnetic Solid Phase Extraction Based on Modified Magnetite Nanoparticles Coupled with Dispersive Liquid–Liquid Microextraction as an Efficient Method for Simultaneous Extraction of Hydrophobic and Hydrophilic Drugs

In this work, surfactant-coated Fe₃O₄@decanoic acid nanoparticles was synthesized as a viable nanosorbent for coextraction of drugs with different polarities (hydrophobic, hydrophilic). To reach desirable enrichment factors, efficient clean-up and low limits of detection (LODs), the method was combined with dispersive liquid–liquid microextraction (DLLME). The coupling of these extraction methods with GC-FID detection was applied to simultaneous extraction and quantification of venlafaxine (VLF) as a hydrophilic model drug and desipramine (DESI) and clomipramine (CLO) as hydrophobic model drugs in urine samples. The effect of sample pH, nanosorbent amount, sorption time, surfactant concentration, eluent type, eluent volume, salt content, elution time in magnetic solid phase extraction step and extraction solvent and its volume along with sample pH in DLLME step were optimized. Under the selected conditions, linearity was achieved within the range of 5–5000 µg L^?1. The LOD values were obtained in the range of 1.5–3.0 µg L^?1 for DESI, 1.2–2.5 µg L^?1 for VLF and 2.0–4.0 µg L^?1 for CLO, respectively. The percent of extraction recoveries and relative standard deviations (n?=?5) were in the range of 82.4–95.9 and 6.1 for DESI, 60.5–92.8 and 6.9 for VLF and 57.2–58.0 and 5.5 for CLO, respectively. Ultimately, the applicability of the new method was successfully confirmed by the extraction and quantification of DESI, VLF and CLO from human urine samples.     

A Simple and Rapid Reversed Phase High Performance Liquid Chromatographic Method for Quantification of Alprazolam and α-Hydroxyalprazolam in Plasma

Abstract

A simple and rapid reversed-phase liquid chromatographic method for the determination of alprazolam and a-hydroxyalprazolam in plasma is described. Flunictrazepam was used as internal standard. Plasma samples were buffered with sodium borate and extracted with dichloromethane /n-pentane 4:6 v/v for 60 sec on a vortex apparatus. Extraction solvent was evaporated to dryness and extraction residues were reconstituted in the mobile phase. Samples were chromatographed on a 5μ Lichrospher RP-18 column (25cm × 4mm i. d) using acetonitrile/water 40:60 v/v as the mobile phase. The column effluent was monitored at 230nm. The lower limit of detection was 1ng/ml for alprazolam and a-hydroxyalprazolam while the lower limit of quantification was 2ng/ml for both compounds. Peak height and plasma     

A Unified and Practical Method for Carbon–Heteroatom Cross-Coupling using Nickel/Photo Dual Catalysis

While carbon–heteroatom cross-coupling reactions have been extensively studied, many methods are specific and limited to a particular set of substrates or functional groups. Reported here is a general method that allows for C−O, C−N and C−S cross-coupling reactions under one general set of conditions. We propose that an energy transfer pathway, in which an iridium photosensitizer produces an excited nickel(II) complex, is responsible for the key reductive elimination step that couples aryl bromides, iodides, and chlorides to 1° and 2° alcohols, amines, thiols, carbamates, and sulfonamides, and is amenable to scale up via a flow apparatus.     

Functional and Comfort Properties of Textiles from TENCEL® Fibres Resulting from the Fibres' Water-Absorbing Nanostructure: A Review

Summary: The comfort in wear of textiles has been studied extensively on the level of textile construction. The influence of the fibre material is present in the experience of textile consumers, but objective assessment is rather difficult. Some recent works are reviewed here. TENCEL® is a man-made cellulosic fibre of the generic fibre type lyocell. The background of the special comfort in wear of textiles made from TENCEL® fibres is explained as a consequence of the fibres' water-absorbing nanostructure. The basis for these properties are found in the high absorption of water and water vapour, which leads to high heat capacity and heat balancing effect for thermoregulation, comparable with the action of phase change materials. The thermal wear properties resulting are the cool and dry touch, the active cooling effect in sports wear, and the warming properties when used as an insulation layer. These effects are to a certain extent adaptive to the environment, providing comfort in a wide range of climatic conditions. Moreover, neutral electric properties, retarded bacterial growth and good skin sensory perception add to the overall skin friendly properties, which were also shown in wear studies with patients suffering from skin diseases.     

A One-dimensional Metal-organic Framework of Eu(Ⅲ) from Triazine-based Flexible Polycarboxylate and Bidentate Nitrogen Donor Ligand

A new Eu(III) complex from 2,2'-bipyridine(2,2'-bipy) and 1,3,5-triazine-2-4,6-tri(L-alanine)(H3L), {[Eu(L)(2,2'-bipy)](H2O)}n(1), has been synthesized and characterized. The X-ray structure analysis reveals that 1 is an infinite one-dimensional chain-like coordination polymer consisting of dinuclear lanthanide building blocks. The 1D chains are further assembled into a 2D supramolecular architecture through π···π interaction among chains. Crystal data for 1: Eu C22H25N8O7, triclinic, space group P1, a = 11.3965(1), b = 11.5112(6), c = 12.0404(1)?, α = 61.970(11), β = 86.698(15), γ = 65.254(12)°, V = 1247.0(2) ?3 and Z = 2. Solid-state photoluminescence property of 1 was investigated, which exhibited remarkable red luminescence emissions with high quantum yield up to 37%.     

A Modified and Green Procedure for the Synthesis of β-Amido Ketones Using a BrΦnsted-Acidic Ionic Liquid as Novel and Reusable Catalyst

A green and improved method for the synthesis of β‐amido ketones through one‐pot multi‐component reaction of an enolizable ketone, aryl aldehyde, acetonitrile or benzonitrile in the presence of trimethylsilyl chloride using 3‐methyl‐1‐(4‐sulfonic acid)butylimidazolium hydrogen sulfate [(CH₂)₄SO₃HMIM][HSO₄], a Br?nsted‐acidic ionic liquid, as an effective and recyclable catalyst is described. The present methodology offers several advantages such as simple procedure with an easy work‐up, relatively short reaction time, and good to excellent yields.     

A Short and Efficient Method for the Preparation of α, p-Dimethylstyrene from Citral (1)

Acid catalysed cyclization of citral to give α, p-dimethyl styrene using chloranil as an ozidizing agent is reported. The important aspect of this transformation is the dehydration of intermediate piperitenol followed by dehydrogenation to furnish the target compound in 80.5% yield.     

The First Normal-Phase High-Performance Thin-Layer Chromatographic Method for the Simultaneous Determination of the Antimalarial Drugs Atovaquone and Proguanil from Malarone® Tablets

JPC – Journal of Planar Chromatography – Modern TLC -     

Amperometric Nitric Oxide Sensor Based on Poly(Thionine)/Nafion‐Modified Electrode and Its Application in Monitoring Nitric Oxide Release from Rat Kidney

Abstract

A novel amperometric nitric oxide (NO) sensor based on a glassy carbon electrode modified with thionine and Nafion films has been developed. The oxidation peak current of NO increased significantly at the poly(thionine)/Nafion‐modified glassy carbon electrode (GCE), which can be used for the detection of NO. The oxidation peak current was linear with the concentration of nitric oxide over the range from 3.6×10^?7 to 6.8×10^?5 mol · L^?1, and the detection limit was 7.2×10^?8 mol · L^?1. This nitric oxide sensor showed high selectivity to nitric oxide determination, and some potential interference could be eliminated effectively. The nitric oxide sensor has been applied to monitor NO release from rat kidney stimulated by L‐arginine. The results indicated the applicability of the NO sensor to biomedical samples.     

Method to build 2,4-substituted selenazole from β-azido diselenide and carboxylic acid: A formal synthesis of selenazofurin

A novel approach for the synthesis of 2,4-disubstituted selenazoles using carboxylic acids (or anhydrides) and β-azido diselenide was achieved via a one-pot cascade formation of selenazoline (Staudinger reduction/diselenide cleavage/selenocarbonylation/aza-Wittig reaction) and a following MnO₂-promoted oxidation. This method offers excellent substrate flexibility, and its valuable application is exemplified by an efficient total synthesis of Selenazofurin which exhibited good antitumor activities against K562 and A549?cells.     

Simultaneous LC–MS Analysis and of Wogonin and Oroxylin A in Rat Plasma, and Pharmacokinetic Studies After Administration of the Active Fraction from Xiao-Xu-Ming Decoction

A rapid and specific high-performance liquid chromatographic method coupled with electrospray ionization mass spectrometric detection has been developed and validated for identification and quantification of wogonin and oroxylin A in rat plasma. Wogonin, oroxylin A, and diazepam (internal standard) were extracted from plasma samples by liquid–liquid extraction with ethyl acetate. Chromatographic separation was achieved on a C₁₈ column with acetonitrile–0.6% aqueous formic acid 35:65 (v/v) as mobile phase at a flow rate of 0.2 mL min^?1. Detection was performed with a single-quadrupole mass spectrometer in selected-ion-monitoring (SIM) mode. Linearity was good within the concentration range 14.4–360 ng mL^?1 for wogonin and 10.8–271 ng mL^?1 for oroxylin A; the correlation coefficients (r ²) were 0.9999. The intra-day and inter-day precision, as RSD, was below 12.4%, and accuracy ranged from 81.1 to 111.9%. The lower limit of quantification was 14.4 ng mL^?1 for wogonin and 10.8 ng mL^?1 for oroxylin A. This method was successfully used in the first pharmacokinetic study of wogonin and oroxylin A in rat plasma after oral administration of the active fraction from Xiao-xu-ming decoction.     

A fast and inexpensive procedure for the isolation of synthetic cannabinoids from ‘Spice’ products using a flash chromatography system

In the age of the Internet, the variety of drugs offered online is constantly increasing, and new drugs emerge every month. One group of drugs showing such an enormous increase is that of synthetic cannabinoids. Since their first identification in ‘herbal mixtures’, new structural modifications continue to appear on the market. In order to keep up with this process, toxicological screening methods need to be up to date. This can become extremely difficult if no reference material is available. In this article, a fast and effective way to extract and purify synthetic cannabinoids from ‘herbal mixtures’ is presented. This method opens a new opportunity for a timely reaction by obtaining reference material straight out of the ‘herbal mixtures’ ordered via the Internet. Isolation was carried out on a flash chromatography system with gradient elution on a C18 column using methanol and 0.55 % formic acid as mobile phases. The obtained purity of all compounds exceeded 99 %. In addition to the isolation of single compounds, the method proved to be suitable for the separation of various synthetic cannabinoids in one mixture, including the diastereomers cis- and trans-CP-47,497-C8. This approach for obtaining pure standards of new drugs proved to be effective, inexpensive and much quicker than waiting for the substances to be commercially available as reference material.

Mechanism of simultaneous removal of Ca2+, Ni2+, Pb2+ and Al3+ ions from aqueous solutions using Purolite® S930 ion exchange resin

The sorption mechanism of Ca²⁺, Ni²⁺, Pb²⁺, and Al³⁺on ion exchange resin S930 has been studied as a function of pH in both mono-component and quaternary systems at ion ratio 1:1:1:1. The equilibrium of ion exchange process in mono-component systems has been followed as an adsorption process and it was tested for Langmuir and Freundlich isotherm equations. The selectivity coefficient of the resin for these cations varied in different manners depending on the pH range. The structural characteristics of pores in the initial resin and the resin after contact with synthetic solutions at pH 3.03 and 3.95 have been investigated by using SEM and EDAX techniques.     

A Combined Peritoneal Macrophage/Cell Membrane Chromatography and Offline GC�CMS Method for Screening Anti-Inflammatory Components from Chinese Traditional Medicine Houttuynia cordata Thunb.

The aim of this study was to screen for the anti-inflammatory components from Houttuynia cordata Thunb (HCT) using an analytical method combining cell membrane chromatography (CMC) with gas chromatography?Cmass spectrometry (GC?CMS). The stationary phase of the CMC employed mouse peritoneal macrophage (PM) cell membranes. We investigated the performance of the PM/CMC-offline-GC?CMS method using hydrocortisone (HC) as standard. The method was then applied to the identification of anti-inflammatory components in extracts of HCT. The major component retained by CMC was identified as methyl nonyl ketone (MNK) by GC?CMS. In vitro experiments revealed that MNK was able to inhibit LPS-induction of TNF-??, NO, and H₂O₂ production in a dose-dependent manner. IC₅₀ values were 3.3, 4.1, and 3.6 ??g mL^?1, respectively. The PM/CMC-offline-GC?CMS method is an effective screening system for the rapid detection, enrichment, and identification of target components from complex samples.