Quantitative and morphological analysis of biofilm formation on self-assembled monolayers

In spite of intensive studies over the past two decades, the influence of surface properties on bacterial adhesion and biofilm formation remains unclear, particularly on late steps. In order to contribute to the elucidation of this point, we compared the impact of two different substrates on the formation of bacterial biofilm, by analysing bacterial amount and biofilm structure on hydrophilic and hydrophobic surfaces. The surfaces were constituted by NH₂- and CH₃-terminated self-assembled monolayers (SAMs) on silicon wafers, allowing to consider only the surface chemistry influence because wafers low roughness. A strain of Escherichia coli K12, able to produce biofilm on abiotic surfaces, was grown with culture durations varying from 4 h to 336 h on both types of substrates. The amount of adhered bacteria was determined after detachment by both photometry at 630 nm and direct counting under light microscope, while the spatial distribution of adhered bacteria was observed by fluorescence microscopy. A general view of our results suggests a little influence of the surface chemistry on adherent bacteria amount, but a clear impact on dynamics of biofilm growth as well as on biofilm structure. This work points out how surface chemistry of substrates can influence the bacterial adhesion and the biofilm formation.     

Reactivity of acetylenyl-terminated self-assembled monolayers on gold: triazole formation

We report the reactivity of acetylenyl-terminated self-assembled monolayers (SAMs) on gold toward "click" chemistry, Huisgen 1,3-dipolar addition, leading to the formation of triazoles. After the formation of acetylenyl-terminated SAMs, the triazole formation was performed on the SAMs and the reaction was confirmed by Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, ellipsometry, and contact angle goniometry. "Click" chemistry has offered a versatile strategy for the functionalization in solution chemistry with mild reaction conditions and a high compatibility in functional groups, and our result shows that the reaction could be applied to acetylenyl-terminated SAMs for the introduction of useful functional groups to the surfaces.     

Nanomechanics of the formation of DNA self-assembled monolayers and hybridization on microcantilevers

Biomolecular interactions over the surface of a microcantilever can produce its bending motion via changes of the surface stress, which is referred to nanomechanical response. Here, we have studied the interaction forces responsible for the bending motion during the formation of a self-assembled monolayer of thiolated 27-mer single-stranded DNA on the gold-coated side of a microcantilever and during the subsequent hybridization with the complementary nucleic acid. The immobilization of the single-stranded DNA probe gives a mean surface stress of 25 mN/m and a mean bending of 23 nm for microcantilevers with a length and thickness of about 200 microm and 0.8 microm, respectively. The hybridization with the complementary sequence could not be inferred from the nanomechanical response. The nanomechanical response was compared with data from well-established techniques such as surface plasmon resonance and radiolabeling, to determine the surface coverage and study the intermolecular forces between neighboring DNA molecules anchored to the microcantilever surface. From both techniques, an immobilization surface density of 3 x 10(12) molecules/cm(2) and a hybridization efficiency of 40% were determined. More importantly, label-free hybridization was clearly detected in the same conditions with a conventional sensor based on surface plasmon resonance. The results imply that the nanomechanical signal during the immobilization process arises mainly from the covalent attachment to the gold surface, and the interchain interactions between neighboring DNA molecules are weak, producing an undetectable surface stress. We conclude that detection of nucleic acid hybridization with nanomechanical sensors requires reference cantilevers to remove nonspecific signals, more sensitive microcantilever geometries, and immobilization chemistries specially addressed to enhance the surface stress variations.     

Maleimido-terminated self-assembled monolayers

Four approaches have been explored for the preparation of maleimido-functionalized self-assembled monolayers (SAMs) on silicon. SAMs prepared by self-assembly of maleimido-functionalized alkyltrichlorosilanes (11-maleimido-undecyl-trichlorosilane) on oxide-covered silicon yield higher signals from maleimido functionalities in ATR-IR (attenuated total reflection IR) spectroscopy and XPS (X-ray photoelectron spectroscopy) than the other three methods. The surface composition of maleimido groups was tailored further by the formation of mixed monolayers with nonfunctionalized alkyltrichlorosilanes (decyltrichlorosilane). The order of the alkyl chains within the monolayers only slightly depends on the composition of the mixed monolayers. We utilized the maleimido-terminated SAMs to bind various nucleophilic compounds, alkylamines, alkylthiols, and thiol-tagged DNA oligonucleotides by means of conjugate addition.     

Conglomerate crystallization on self-assembled monolayers

In this communication, we demonstrate that chiral self-assembled monolayers can be used for polymorphism control of chiral crystals. We studied the crystallization of DL-glutamic acid on chiral self-assembled monolayers and showed that crystallization of DL-glutamic acid on the chiral SAMs resulted in stabilization of the metastable conglomerate form.     

Dithiocarbamates: functional and versatile linkers for the formation of self-assembled monolayers

Self-assembled monolayers have evolved into one of the best established self-assembly systems with high relevance in a scientific and applied context. So far, however, virtually exclusively thiol functional groups have been used for the investigation of fundamental processes on metal surfaces. In this paper, an alternative binding group, the dithiocarbamate (DTC) group, is re-visited. Complete SAM formation with new layer properties characteristically different from thiol SAMs is demonstrated for mono-functional acyclic and bifunctional cyclic dithiocarbamates on Au111 by X-ray photoelectron spectroscopy, cyclic voltammetry, and scanning tunneling microscopy. Furthermore, the chemical adsorption and voltammetric desorption reactions are quantitatively determined. The resonant bi-dentate structure of the DTC provides a characteristically different molecule-metal coupling compared to the thiols and makes the DTC an interesting system for molecular electronics.     

On the importance of purity for the formation of self-assembled monolayers from thiocyanates

Assembly of dodecyl thiocyanate (C12SCN) from ethanol solution onto Au(111)/mica substrates was investigated by scanning tunneling microscopy (STM), near edge X-ray absorption fine structure spectroscopy (NEXAFS), X-ray photoelectron spectroscopy (XPS), and infrared reflection-absorption spectroscopy (IRRAS). Contrary to previous reports, thiolate monolayers formed by cleavage of the S-CN bond can be obtained whose quality is at least as good as that of self-assembled monolayers (SAMs) formed directly from the thiol analogue of C12SCN, dodecanethiol (C12SH). However, the achievable quality is strikingly dependent on the purity of the thiocyanate with even low levels of contamination impeding the formation of structurally well-defined monolayers.     

Monitoring the formation of self-assembled monolayers of alkanedithiols using a micromechanical cantilever sensor

Using a micromechanical cantilever device, the surface stress induced during the growth of alkanedithiol (HS(CH2)nSH) monolayers on gold in solution is continuously monitored and reported. Adsorption of alkanedithiols of varying chain lengths is observed and compared to each other, as well as to the adsorption of hydroxyalkanethiols (HS(CH2)nOH) and alkanethiols (HS(CH2)nCH3). The results have revealed a significant change in surface stress on the basis of the chain length of the alkanedithiol. The long-chain (n > 10) alkanedithiol adsorption imposes a tensile stress on the gold-coated surface of the cantilever rather than the compressive stress exhibited by both alkanethiols and short-chain dithiols. Our results suggest a phenomenon in which the two thiols of the alkanedithiol adsorb onto the gold surface forming a loop inducing a tensile stress on the cantilever for long chain lengths. This study shows that micromechanical cantilever sensors can be very valuable tools in the exploration and characterization of self-assembled monolayers.     

Phosphonate self-assembled monolayers on aluminum surfaces

Substrates of aluminum (Al) deposited by physical vapor deposition onto Si substrates and then chemically reacted with perfluorodecylphosphonic acid (PFDPAlSi), decylphosphonic acid (DPAlSi), and octadecylphosphonic acid (ODPAlSi) were studied by x-ray photoelectron spectroscopy (XPS), contact angle measurements, atomic force microscopy (AFM), and friction force microscopy, a derivative of AFM, to characterize their surface chemical composition, roughness, and micro-/nanotribological properties. XPS analysis confirmed the presence of perfluorinated and nonperfluorinated alkylphosphonate molecules on the PFDPAlSi, DPAlSi, and ODPAlSi. The sessile drop static contact angle of pure water on PFDPAlSi was typically more than 130 degrees and on DPAlSi and ODPAlSi typically more than 125 degrees indicating that all phosphonic acid reacted AlSi samples were very hydrophobic. The surface roughness for PFDPAlSi, DPAlSi, ODPAlSi, and bare AlSi was approximately 35 nm as determined by AFM. The surface energy for PFDPAlSi was determined to be approximately 11 mNm by the Zisman plot method compared to 21 and 20 mNm for DPAlSi and ODPAlSi, respectively. Tribology involves the measure of lateral forces due to friction and adhesion between two surfaces. Friction, adhesion, and wear play important roles in the performance of micro-/nanoelectromechanical systems. PFDPAlSi gave the lowest adhesion and coefficient of friction values while bare AlSi gave the highest. The adhesion and coefficient of friction values for DPAlSi and ODPAlSi were comparable.     

1-Dodecanethiol self-assembled monolayers on cobalt

Cobalt and its alloys are used in a broad range of application fields. However, the use of this metal is especially limited by its strongly oxidizable nature. The use of alkanethiol self-assembled monolayers (SAMs) is a very efficient way to protect against such oxidation and/or to inhibit corrosion. This surface modification method has been particularly applied to oxidizable metals such as copper or nickel, yet the modification of cobalt surfaces by alkanethiol SAMs received limited attention up to now. In this work, we study the influence of parameters by which to control the self-assembly process of 1-dodecanethiol monolayers on cobalt: nature of the surface pretreatment, solvent, immersion time, and concentration. Each of these parameters has been optimized to obtain a densely packed and stable monolayer able to efficiently prevent the reoxidation of the modified cobalt substrates. The obtained monolayers were characterized by X-ray photoelectron spectroscopy (XPS), polarization modulation infrared reflection-absorption spectroscopy, and contact angle measurements. The stability of the optimized 1-dodecanethiol monolayer upon air exposure for 28 days has been confirmed by XPS.     

Hydroxide ion adsorption on self-assembled monolayers

It is argued, on the basis of density functional calculations, that a self-assembled monolayer of oligo(ethylene glycol) or n-alkanes in contact with water will preferentially adsorb hydroxyl ions (either from autoionization of water or added to the solution) on both methoxy- and hydroxide-terminated endgroups, thus charging the surface region of the SAM negatively with an estimated charge density of about 1 microC/cm(2) in agreement with recent experiments. The negative charging can explain long-ranged forces between opposing SAM surfaces. On dense SAMs, hydroxyl ions are highly mobile. Hydronium ions can absorb by penetration into the SAM provided there is enough lateral space for their encapsulation. The important role of hydration is demonstrated by calculating the excess binding energy of adsorption using a Born-Haber cycle.     

Rapid formation of well-ordered self-assembled monolayers of dodecanethiol on polycrystalline gold by microwave irradiation

This article reports a rapid method of preparing self-assembled monolayers of dodecanethiol (C₁₂SH-SAMs) on polycrystalline gold by microwave irradiation (MWI, 650 W, duty cycle is 10%). The qualities of C₁₂SH-SAMs were characterized by both cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). The results show that the C₁₂SH-SAMs formed by MWI in 120 s (C₁₂SH-SAMs_MWI,120 s) have low ionic permeability (the differential capacitance C_d values are independent of the scan rate and phase angle at 1 Hz Φ_1 Hz = 89 ± 0.9°), excellent electrochemical blocking ability towards the redox probe (the current i_MWI,120 s obtained from CV is lowest when compared to other SAMs and charge transfer resistance R_ct = (1.15 ± 0.19) × 10⁶ Ω cm²), and high surface coverage (99.996 ± 0.001%).     

Electroreduction of oxygen on octadecylmercaptan self-assembled monolayers

The reduction of oxygen has been studied on octadecylmercaptan self-assembled monolayers adsorbed on gold substrates in borate buffer solutions with a rotating disc electrode. A great inhibition of the oxygen reduction and other electrochemical reactions by these monolayers has been found. However, after polarisation at -0.80 V(SHE) the protecting properties of the film against electron transfer reactions are lost, and a behaviour similar to bare gold is observed. Ex situ XPS indicates that the thiol monolayer has not been desorbed to a large extent during oxygen reduction. Disorders of the monolayer structure and desorption of thiol molecules are proposed as the main reasons for the accessibility of electrochemical reactions to the surface.     

Electroformation of peptide self-assembled monolayers on gold

The application of a potential to deposit a monolayer of 3-mercaptopropionic acid-histidinyl-histidinyl-histidinyl-aspartyl-aspartyl (3-MPA-HHHDD-OH) controls the density and molecular structure of the peptide monolayer, which results in different wettabilities of the surface, surface density, orientation of the molecule (extended or bent), and nonspecific adsorption of serum proteins. 3-MPA-HHHDD-OH must be deposited at 200 mV to maintain an extended configuration, which promoted low biofouling properties.     

Simulations of calcite crystallization on self-assembled monolayers

This paper presents simulations of calcium carbonate ordering in contact with self-assembled monolayers. The calculations use potential-based molecular dynamics to model the crystallization of calcium carbonate to calcite expressing both the (00.1) and (01.2) surfaces. The effect of monolayer properties: ionization; epitaxial matching; charge density; and headgroup orientation on the crystallization process are examined in detail. The results demonstrate that highly charged surfaces are vital to stimulate ordering and crystallization. Template directed crystallization requires charge epitaxy between both the crystal surface and the monolayer. The orientation of the headgroup appears to make no contribution to the selection of the crystal surface.     

Temperature-dependent formation of octadecylsiloxane self-assembled monolayers on mica as studied by atomic force microscopy

We have investigated the growth of octadecylsiloxane (ODS) self-assembled monolayers on mica. Freshly cleaved muscovite mica and octadecyltrichlorosilane (OTS) dissolved in toluene (c = 1.0 mmol/L) have been used as substrate and precursor, respectively. The water content of the adsorption solution was between 14.6 and 16.6 mmol/L. Adsorption experiments were carried out in a temperature range between 5 and 45 degrees C, and the obtained submonolayer ODS films were characterized with atomic force microscopy (AFM). Besides the morphology of the films, also information on the surface coverage has been obtained by quantitative evaluation of the AFM images. Depending on the temperature, evidence for both ordered and disordered expanded ODS phases has been found. The pronounced maximum in surface coverage--in contrast to adsorption on silicon substrates--at a temperature of about 27 degrees C and the different morphology of the submonolayer films as compared to silicon substrates could be explained in terms of a deposition, diffusion, and aggregation (DDA) model.     

Synthesis of model long-chain ω-alkenyltrichlorosilanes and triethoxysilanes for the formation of self-assembled monolayers

The synthesis of model long-chain hydrocarbons (C₁₃ and C₁₉) carrying a vinyl group and a trichloro- or a triethoxysilyl group at each end is reported. These compounds are suitable for linkage to a hydroxylated silicon surface and at the other end with vinyl group for further functionalization and multilayer formation.     

Electroreduction of oxygen on octadecylmercaptan self-assembled monolayers

The reduction of oxygen has been studied on octadecylmercaptan self-assembled monolayers adsorbed on gold substrates in borate buffer solutions with a rotating disc electrode. A great inhibition of the oxygen reduction and other electrochemical reactions by these monolayers has been found. However, after polarisation at –0.80 V_SHE the protecting properties of the film against electron transfer reactions are lost, and a behaviour similar to bare gold is observed. Ex situ XPS indicates that the thiol monolayer has not been desorbed to a large extent during oxygen reduction. Disorders of the monolayer structure and desorption of thiol molecules are proposed as the main reasons for the accessibility of electrochemical reactions to the surface.     

m-Terphenyl thiols: rigid and bulky molecules for the formation of bioactive self-assembled monolayers on gold

The m-terphenyl 4-mercaptomethyl-2,6-diphenylbenzoic acid (3), was prepared and shown to form omega-carboxyl terminated self-assembled monolayers (SAMs) on gold with high surface pKa(10.1 +/- 0.2) and low density favourable for the binding of biological macromolecules.