A SERS-active microfluidic device with tunable surface plasmon resonances

A surface-enhanced Raman scattering (SERS)-active microfluidic device with tunable surface plasmon resonances is presented here. It is constructed by silver grating substrates prepared by two-beam laser interference of photoresists and subsequent metal evaporation coating, as well as PDMS microchannel derived from soft lithography. By varying the period of gratings from 200 to 550 nm, surface plasmon resonances (SPRs) from the metal gratings could be tuned in a certain range. When the SPRs match with the Raman excitation line, the highest enhancement factor of 2×10(7) is achieved in the SERS detection. The SERS-active microchannel with tunable SPRs exhibits both high enhancement factor and reproducibility of SERS signals, and thus holds great promise for applications of on-chip SERS detection.     

Reproducible SERRS from structured gold surfaces

Metallic substrates with ordered spherical cavities have been shown to be very effective for surface-enhanced Raman scattering (SERS) and can be fabricated reproducibly using electrodeposition. The sensitivity of detection is increased by several orders of magnitude by using surface-enhanced resonance Raman scattering (SERRS). In this report we demonstrate SERRS for the first time on electrodeposited gold films templated with colloidal spheres and demonstrate the reproducibility of the response. We also obtain a direct comparison between SERRS and SERS by choosing two dyes, Cy5 and Cy3, which are similar in structure but differ in their excitation maxima, such that one is resonant and the other non-resonant with our laser excitation. As expected, the resonant enhancement is found to be of the order of 10(3) over and above that for SERS. The net SERRS enhancements are shown to be of the order of 10(9). We also find that the resonant enhancement profile of the different peaks for the chromophore follows the plasmonic resonance absorption spectrum obtained for the structured surface.     

Tunable SERS from aluminium nanohole arrays in the ultraviolet region

Ordered Al nanohole arrays for tunable UV-SERS are theoretically proposed and simulated by using FDTD method. The properly designed Al nanohole arrays produce stable and predictable Raman enhancement under the deep UV laser illumination. The SERS enhancement factor as high as 5 to 6 orders of magnitude is attained in the optimal geometry. The correlation between the SERS and EOT is studied in detail.     

Non-labeling multiplex surface enhanced Raman scattering (SERS) detection of volatile organic compounds (VOCs)

In this paper, we report multiplex SERS based VOCs detection with a leaning nano-pillar substrate. The VOCs analyte molecules adsorbed at the tips of the nano-pillars produced SERS signal due to the field enhancement occurring at the localized surface plasmon hot spots between adjacent leaning nano-pillars. In this experiment, detections of acetone and ethanol vapor at different concentrations were demonstrated. The detection limits were found to be 0.0017 ng and 0.0037 ng for ethanol and acetone vapor molecules respectively. Our approach is a non-labeling method such that it does not require the incorporation of any chemical sensing layer for the enrichment of gas molecules on sensor surface. The leaning nano-pillar substrate also showed highly reproducible SERS signal in cyclic VOCs detection, which can reduce the detection cost in practical applications. Further, multiplex SERS detection on different combination of acetone and ethanol vapor was also successfully demonstrated. The vibrational fingerprints of molecular structures provide specific Raman peaks for different VOCs contents. To the best of our knowledge, this is the first multiplex VOCs detection using SERS. We believe that this work may lead to a portable device for multiplex, specific and highly sensitive detection of complex VOCs samples that can find potential applications in exhaled breath analysis, hazardous gas analysis, homeland security and environmental monitoring.     

Rapid, sensitive, and multiplexed on-chip optical sensors for micro-gas chromatography

We developed and characterized a rapid, sensitive and integrated optical vapor sensor array for micro-gas chromatography (μGC) applications. The sensor is based on the Fabry-Pérot (FP) interferometer formed by a micrometre-thin vapor-sensitive polymer layer coated on a silicon wafer. The thickness and the refractive index of the polymer vary in response to the vapor analyte, resulting in a change in the reflected intensity of the laser impinged on the sensor. In our study, four different polymers were coated on four wells pre-etched on a silicon wafer to form a spatially separated sensor array. A CMOS imager was employed to simultaneously monitor the polymers' response, thus enabling multiplexed detection of a vapor analyte passing through the GC column. A sub-second detection time was demonstrated. In addition, a sub-picogram detection limit was achieved, representing orders of magnitude improvement over the on-chip vapor sensors previously reported.     

Core (Au)-shell (Ag) structure nitrogen dots for the recognition of nitroaniline isomers by surface-enhanced Raman scattering

A facile synthesis method for NDs-Au@AgNPs SERS substrate using Au seeds prepared by nitrogen-rich quantum dots (NDs) as reducing agent and stabilizer was developed for nitroaniline isomers recognition by surface-enhanced Raman scattering.     

Localized flexible integration of high-efficiency surface enhanced Raman scattering (SERS) monitors into microfluidic channels

We report here a facile approach for flexible integration of high efficiency surface enhanced Raman scattering (SERS) monitors in a continuous microfluidic channel. In our work, femtosecond laser direct writing was adopted for highly localizable and controllable fabrication of the SERS monitor through a multi-photon absorption (MPA) induced photoreduction of silver salt solution. The silver substrate could be shaped into designed patterns, and could be precisely located at the desired position of the microchannel bed, giving the feasibility for real-time detection during reactions. SEM and TEM images show that the silver substrates were composed of crystallized silver nanoplates with an average thickness of 50 nm. AFM results reveal that the substrates were about 600 nm in height and the surface was very rough. As representative tests for SERS detection, p-aminothiophenol (p-ATP) and flavin adenine dinucleotide (FAD) were chosen as probing molecules for microfluidic analysis at visible light (514.5 nm) excitation, exhibiting an enhancement factor of ~10(8). In addition, the combination of the SERS substrate with the microfluidic channel allows detection of inactive analytes through in situ microfluidic reactions.     

Chemical effects in surface-enhanced raman scattering: pyridine chemisorbed on silver adatoms on Rh (100)

Surface-enhanced Raman scattering (SERS) has been observed from pyridine chemisorbed on silver adatoms which had been deposited at submonolayer coverage on a Rh (100) substrate under ultrahigh vacuum. The vibrational frequencies measured are characteristic of pyridine chemically adsorbed on the silver adatoms and an enhancement factor of ≈ 15–65 is calculated from the intensity of the scattering. This enhancement factor is in addition to the factor of four electromagnetic enhancement found for flat metal surfaces and therefore provides unambiguous evidence for the existence and magnitude of chemical enhancement in SERS.     

Fabrication of bimetallic microfluidic surface-enhanced Raman scattering sensors on paper by screen printing

Au–Ag bimetallic microfluidic, dumbbell-shaped, surface enhanced Raman scattering (SERS) sensors were fabricated on cellulose paper by screen printing. These printed sensors rely on a sample droplet injection zone, and a SERS detection zone at either end of the dumbbell motif, fabricated by printing silver nanoparticles (Ag NPs) and gold nanoparticles (Au NPs) successively with microscale precision. The microfluidic channel was patterned using an insulating ink to connect these two zones and form a hydrophobic circuit. Owing to capillary action of paper in the millimeter-sized channels, the sensor could enable self-filtering of fluids to remove suspended particles within wastewater without pumping. This sensor also allows sensitive SERS detection, due to advantageous combination of the strong surface enhancement of Ag NPs and excellent chemical stability of Au NPs. The SERS performance of the sensors was investigated by employing the probe rhodamine 6G, a limit of detection (LOD) of 1.1 × 10⁻¹³ M and an enhancement factor of 8.6 × 10⁶ could be achieved. Moreover, the dumbbell-shaped bimetallic sensors exhibited good stability with SERS performance being maintained over 14 weeks in air, and high reproducibility with less than 15% variation in spot-to-spot SERS intensity. Using these dumbbell-shaped bimetallic sensors, substituted aromatic pollutants in wastewater samples could be quantitatively analyzed, which demonstrated their excellent capability for rapid trace pollutant detection in wastewater samples in the field without pre-separation.     

Raman enhancement factor of a single tunable nanoplasmonic resonator

We have developed a novel technique to precisely determine the Raman enhancement factor in single nanoplasmonic resonators (TNPRs). TNPRs are lithographically defined metallodielectric nanoparticles composed of two silver disks stacked vertically, separated by a silica layer. At resonance, the local electromagnetic fields are enhanced at the TNPR surface, making it an ideal surface-enhanced Raman scattering (SERS) active substrate. The ability to control the dimensions of the metallic and dielectric layers offers the unique advantage of fine-tuning the plasmon resonance frequency to maximize the enhancement of the Raman signal. Furthermore, by selective shielding of the outer surface of the metallic structure, the efficiency can be further enhanced by guiding the molecular assembly to the locations that exhibit strong electromagnetic fields. We experimentally demonstrate SERS enhancement factors of (6.1+/-0.3)x10(10), with the highest enhancement factor being achieved by using an individual nanoparticle. By using nanofabrication techniques, we eliminate the issues such as large size variations, cluster aggregation, and interparticle effects common in preparing SERS substrates using conventional chemical synthesis or batch fabrication methods. TNPRs produce very controllable and repeatable SERS signals at the desired locations and, thus, make an ideal candidate for device integration.     

农产品中脱氧雪腐镰刀菌烯醇的表面增强拉曼检测

利用便携式拉曼光谱仪建立了一个快速筛查与检测谷物中真菌毒素脱氧雪腐镰刀菌烯醇(DON)的表面增强拉曼散射(SERS)方法。首先利用实验室前期开发的方法制备了具有高活性的水凝胶SERS芯片。该SERS芯片是将预先制备的高SERS活性的单层碳基点(CDs)包裹的银纳米颗粒团聚体(a-AgNPs/CDs)与聚乙烯醇(PVA)水溶液混合均匀后,再利用循环冷冻-解冻的物理交联法制备而成的。实验优化了影响水凝胶SERS芯片对DON的SERS响应的实验条件,包括溶剂、浸泡温度和浸泡时间。在最佳的SERS检测条件下(溶剂为水-乙醇(1:1, v/v),浸泡温度为40 ℃,浸泡时间为5 min), DON的线性响应范围为1~10000 μg/kg(相关系数(R²)=0.9967),检出限(LOD)为0.14 μg/kg,表明该SERS基底具有较高的灵敏度。得益于水凝胶特殊的孔径结构,实际样品基质中常见的糖、蛋白质、油脂、色素等干扰物质都被阻隔在水凝胶外。因此,在复杂样品检测中仅需要简单的提取,而不需要复杂的分离处理。将该方法用于小麦粉中DON的检测,所得回收率为97.3%~103%,相对标准偏差为4.2%~5.0%。实验结果表明所建立的检测DON的SERS方法具有响应范围宽、灵敏度高、重复性好、响应迅速、操作简单、抗干扰能力强等优点,这说明本实验室所构建的水凝胶SERS芯片在粮食中生物毒素的快速筛查与检测方面具有良好的应用潜力。     

The ultratrace detection of crystal violet using surface enhanced Raman scattering on colloidal Ag nanoparticles prepared by electrolysis

Highly active,stable and affordable surface enhanced Raman scattering(SERS) substrates were obtained by electrolyzing a mixture of AgNO_3(4×10~(-4) mol/L) and Na_3C_6H_5O_7·H_2O(6×10~(-5) mol/L) for 1,2,3 and 4h at 7V.With crystal violet(CV) as a test molecule,a portable Raman spectrometer with 785 nm laser excitation was employed to carry out the SERS detection.Colloidal Ag nanoparticles prepared by electrolyzing for 3 h with the particle size of(65±17) nm is a perfect SERS substrate for the ultratrace ...     

用表面增强拉曼散射研究电解法制备的纳米银膜

用一种廉价的电解方法制备了纳米银膜,并详细研究了在这种银膜上的表面增强拉曼散射效果．结晶紫为本实验的检测性分子．通过实验发现,这种银膜用便携式拉曼光谱仪测试并计算出的表面增强拉曼散射的增强因子为603,并对结晶紫的最小检出限为0．1nmol／L．     

Photochemical decoration of silver nanoparticles on magnetic microspheres as substrates for the detection of adenine by surface-enhanced Raman scattering

In this work, silver nanoparticles (AgNPs) decorated magnetic microspheres (MMs) are prepared as surface-enhanced Raman scattering (SERS) substrate for the analysis of adenine in aqueous solutions. To prepare these substrates, magnetic particles were first synthesized by coprecipitation of Fe(II) and Fe(III) with ammonium hydroxide. A thin layer of cross-linked polymer was formed on these magnetic particles by polymerization through suspension of magnetic particles into a solution of divinyl benzene/methyl methacrylate. The resulted polymer protected magnetic particles are round in shape with a size of 80 μm in diameter. To form AgNPs on these MMs, photochemical reduction method was employed and the factors in photochemical reduction method were studied and optimized for the preparation of highly sensitive and stable AgNPs on MMs substrates (abbreviated as AgMMs substrates). By dispersing the AgMMs in aqueous samples, cylindrical magnet was used to attract the AgMMs for SERS detections. The observed enhancement factor of AgMMs reached 7 orders in magnitude for detection of adenine with a detection limit approaching to few hundreds of nanomolar.     

Ag nanoparticles prepared by laser photoreduction as substrates for in situ surface-enhanced Raman scattering analysis of dyes

In this work Ag nanoparticles (AgNP) with surface-enhanced Raman scattering (SERS) activity were prepared and immobilized by laser irradiation on a water/ solid interface where the aqueous phase contains the Ag+ cation and the solid surface is of hydrophilic nature (glass and cellulose). The so-prepared AgNP demonstrated a high SERS effectiveness in the detection of dispersed adsorbates such as the case of the anthraquinonic dye alizarin. The size and SERS effectiveness of AgNP increases with the irradiation time, the laser power, and the cation concentration. Laser-induced AgNP can be classified into two classes attending to the morphology: spherical and planar. The latter are formed after longer irradiation times, being more active regarding the SERS efficiency. Ag photoreduction can be employed for in situ detection of the dye alizarin, but when the dye is placed on a hydrophilic substrate. Even so, this in situ SERS technique could be attractive for analytical applications involving the in situ detection of the analyzed species, such as the case of dyes in artistical objects, textiles, foods, and surface analysis in general.     

Silver nanoparticle aggregates on copper foil for reliable quantitative SERS analysis of polycyclic aromatic hydrocarbons with a portable Raman spectrometer

Silver nanoparticle aggregates were synthesized on copper foil, which was used for the surface-enhanced Raman spectroscopy (SERS) detection of polycyclic aromatic hydrocarbons (PAHs) with a portable Raman spectrometer. Silver nanoparticle aggregates were prepared by immersing copper foil in the solution of Sn(2+) and AgNO(3) in a cyclic fashion. A four-cycle process was selected for the following experiments due to its high enhancement and relatively convenient experimental procedure. The substrate has greater temporal stability under continuous laser radiation, good uniformity and reproducibility, which indicated that the substrate could provide reliable measurements. The relationship between SERS intensity and concentrations of PAHs was studied. Quantitative analysis of PAHs in aqueous solution was further performed based on the prepared substrate. The log-log plot of normalized SERS intensity to PAHs concentration exhibited a good linear relationship, with the detection limits in the range of 5-500 μg L(-1). Thus, due to the stability, reproducibility and quantitative results, the prepared substrate could be used as a potential SERS sensor for the analysis of environmental pollutants.     

In situ controlled growth of well-dispersed gold nanoparticles in TiO2 nanotube arrays as recyclable substrates for surface-enhanced Raman scattering

In this paper, well-aligned Au-decorated TiO(2) nanotube arrays with high surface-enhanced Raman scattering (SERS) enhancement were prepared using a facile in situ reduction and controlled growth approach. The gold nanoparticles are well-dispersed and assembled on the mouth surface and the inside of the TiO(2) nanotubes without clogging. The structure and optical properties of the Au-decorated TiO(2) nanotube arrays have been characterized. The Au-decorated TiO(2) nanotube arrays were employed as SERS-active substrates, which exhibit good performance due to long-range coupling between Au nanoparticles, and TiO(2)-assisted enhanced charge-transfer from Au to Rh6G. The SERS activity of the substrates strongly depends on the crystallite size and level of aggregation. The substrates display significant fluorescence quenching ability and uniform SERS responses throughout the whole surface area. Particularly, good recyclability is shown. The photocatalytic property of Au-decorated TiO(2) nanotube array was exploited to recycle the substrate through UV light photocatalytic purification. The experimental results showed that the substrate is featured by high reproducibility and can be used as a highly efficient SERS substrate for multiple detection of different chemical and biological molecules.     

In situ laser-induced photochemical silver substrate synthesis and sequential SERS detection in a flow cell

A new, simple, and effective approach for multianalyte sequential surface-enhanced Raman scattering (SERS) detection in a flow cell is reported. The silver substrate was prepared in situ by laser-induced photochemical synthesis. By focusing the laser on the 320 μm inner diameter glass capillary at 0.5 ml/min continuous flow of 1 mM silver nitrate and 10 mM sodium citrate mixture, a SERS active silver spot on the inner wall of the glass capillary was prepared in a few seconds. The test analytes, dacarbazine, 4-(2-pyridylazo)resorcinol (PAR) complex with Cu(II), and amoxicillin, were sequentially injected into the flow cell. Each analyte was adsorbed to the silver surface, enabling the recording of high intensity SERS spectra even at 2 s integration times, followed by desorption from the silver surface and being washed away from the capillary. Before and after each analyte passed the detection window, citrate background spectra were recorded, and thus, no “memory effects” perturbed the SERS detection. A good reproducibility of the SERS spectra obtained under flow conditions was observed. The laser-induced photochemically synthesized silver substrate enables high Raman enhancement, is characterized by fast preparation with a high success rate, and represents a valuable alternative for silver colloids as SERS substrate in flow approaches.     

银纳米粒子簇的设计、 制备和表面增强拉曼光谱

通过匹配激光光斑直径与胶体微球的尺寸, 设计制备了银纳米粒子的表面增强拉曼散射(SERS)基底, 并将其用于研究单个银纳米粒子簇的表面增强拉曼光谱. 在制备纳米粒子的过程中, 考察了等离子体刻蚀时间与银沉积厚度对“单”银纳米粒子结构与形貌的影响. 将吡啶、 巯基苯和罗丹明R6G作为SERS探针分子, 研究了其SERS效应, 通过荧光共振能量转移(FRET)机理, 实现了染料分子在单银纳米粒子簇上的SERS效应. SERS光谱测试与相关计算结果表明, 单个银纳米粒子簇的拉曼增强因子能够达到约10⁶.     

水汽界面二维银颗粒表面上的单分子拉曼光谱检测

随着各种超灵敏分析仪器的发展 ,已经可以在低温固体中、室温液体中和电介质表面检测、鉴定单分子及其动力学行为 .这种新进展为科学家在分析化学、分子生物学和纳米结构材料等各种学科的应用开辟了许多新的视窗 .单分子谱学的研究在基础科学和应用科学方面引起了人们广泛的兴趣 .人们不仅希望能够“看到”单分子 ,而且希望了解单分子的物理化学行为 .在各种超灵敏检测技术中 ,拉曼光谱成为一种重要的技术 .由于原子力显微等微区技术的发展 ,并结合高灵敏度检测技术的进步 ,拉曼光谱已经发展成为一种检测灵敏度可以达到分子级的检测技术 [1,…